Adobe Bridge und Apple icloud drive

Ich nutze seit kurzem das icloud drive von Apple, welches auch wirklich gut funktioniert - leider wird es nicht in der Bridge angezeigt, was wirklich ein Nachteil ist. Hat jemand das gleiche Problem, oder gibt es einen Trick? Ich habe es schon mit einer Verknüpfung versucht, aber das klappt leider auch nicht.
Danke schon mal für mögliche Hinweise!

Das Bridge-Forum finden Sie hier:
Bridge General Discussion
Das iCloud benutze ich nicht, so daß ich Ihre frage leider nicht direkt oder mit Scherheit beantworten kann.

Similar Messages

Bridge and Apple iCloud drive

Is anyone using the new iCloud drive? I started only recently and found it working quite well for my tasks. But unfortunately it does not show up in the Bridge, which makes it a bit impractical once you have created a few folders. Especially, when you, like me, use the bridge all the time. So I would appreciate if anyone has any information if this is kind of an issue that is already discussed or that might be changed in the future. Or is there a way to solve it? And last but not least, is it an Apple issue or an Adobe one?

Hi, Yes i too cannot see iCloud or find a natural path to it in iOS and it is a major nuisance. As it is not easy to navigate to without Finder I'd imagine Apple are restricting access. I am going to see if it is hidden in library, but if you solve this post it too!! ;-(
I see you have also posted this in German ! Was hopeful that was an answer and translated it only to see it was you asking! Never mind...

Never used Photoshop CS6 nor Adobe Bridge CS6, on my drive. Trash them before using CC?

I am a photographer.
I never used the Photoshop CS6 nor Adobe Bridge CS6, both of which are on my drive. I used Apple's Aperture software instead.
a) should I trash them before downloading CC (I don't see any Uninstall feature for them)? and,
b) does Bridge come separately from the $9.90 plan?

Within the CC desktop app there should be and option to uninstall CS6.
If not, go to Hard Drive/Applications/Adobe Photoshop CS6 and see if it is actually installed.
Benjamin

Update Photoshop CS2 (Adobe Bridge, AdobeStockPhotos)

Ich habe das angebotene Update für Photoshop CS2 durchgeführt. Angeboten war wurde dieses für Adobe Bridge und AdobeStockPhotos. Am Ende des Updates wurde zum Neustart des Computers aufgefordert um den Akutalisierungsvorgang abzuschließen.
Gesagt, getan.
Nach Neustart, direkt wieder die Aufforderung einen Neustart durchzuführen. Dies jetzt nach jedem Start des PC's.
Wie komme ich über diese Hürde hinweg?
Gruß
Jürgen Schwarzer

Hey Jim,
unter dem Menü Bearbeiten, findet sich bei mir nur der Punkt "Voreinstellungen".
Bei den Unterpunkten wie "Allgemeine", "Dateien verarbeiten", etc. kann ich leider keinen Punkt finden, bei dem ich Update-Optionen beeinflussen könnte - aber vielleicht habe ich auch nur Tomaten auf den Augen.
Könntest du mir genauer beschreiben, wo ich diesen Punkt eventuell finde.
Unter dem Menü "Hilfe" findet sich ein Punkt der "Updates ..." genannt wird. Aktiviere ich diesen, kommt auch nur wieder die Meldung, dass ein Neustart erforderliche sei, bevor der Aktualisierungsvorgang fortgesetzt werden kann. Dies habe ich ja, wie bereits beschrieben, mehrfach getan u. trotzdem erscheint diese Meldung immer wieder, auch nach einem Neustart.
Trotzdem vielen Dank, vielleicht siehst du noch eine andere Möglichkeit.
Gruß Jürgen

Accessing Pictures Held on iCloud Drive

Hi, I have been waiting for Apple's iCloud Drive offering for a while and want to transfer my docs/pics etc. to the new service - but the lack of a standalone Apple iCloud Drive Application is strange. Yes, you can access Docs via Pages etc. but HOW do you access pictures. I have over 30GB of Pictures and if I wanted to transfer them onto Apple's cloud after upgrading my storage option how would I then access them on my iPad/iPhone??
I uploaded a single image to iCloud Drive and looked into the Photo's app for any sign of an iCloud Drive folder to suggest they had been found and there is nothing - so how do you do it?
Cheers

At the present time, you can only access data in iCloud drive from within apps that support it. See http://www.imore.com/icloud-drive-clearing-up-confusion.

Hidden network drives "home" and "net" shown in folder view Adobe Bridge CS5 / Lion Problem

Updated to Mac OS X 10.7.2 Lion and got this "problem":
The hidden network drives "home" and "net" shown in folder view Adobe Bridge CS5 (unlike in 10.6 Snow Leopard).
Normally these network drives are hidden (in Finder and other Apps) - but Adobe Bridge CS5 is showing them, despite "show hidden files" is unchecked in Adobe Bridge.
Not a dramatic "bug", but it also shouldn't be a big problem for Adobe Bridge engineers to solve this. My first question to the Adobe Support was answered like: "we don't know what Apple did change, so we cannot do anything". Hmmm, are you serious?
I tried to resolve that problem by myself but failed. So, if an Adobe engineer is reading this post: perhaps Adobe Bridge is ignoring the automounter master map (that was my approach to resolve it):
# Automounter master map
+auto_master                    # Use directory service
/net           -hosts                 -nobrowse,hidefromfinder,nosuid
/home                                        auto_home       -nobrowse,hidefromfinder
/Network/Servers               -fstab
/-                              -static
You cannot do anything to these folders, so it is not a serious issue, but, I mean, did someone at Adobe check compatibiliy with 10.7 and ignored this issue? If so, are there an other issues ignored?
But I guess, the compatibilty update for Bridge CS5 for Lion is Bridge CS6 - to be fair: I also have to say, that in general Bridge is running okay on Mac OS X 10.7.2 (but could be better, as always;)

Hi Curt Y,
thanks for your answer! Yes you' re right, I forgot to mention that ... before I posted here, I sent a bug report via the Apple Bug Report webpage about the issue ... of course, here are 2 parties involved.
I had a similiar problem once and I got a meesage back from Apple: "that it is a 3rd party problem, sorry" (it was about color management).
I am just a user and I often feel very strange about Apple's (topsecret) communication behaviour ... Whatever, what do I know about software engineering? - Right.
Maybe someone on this forum has an idea, because I'm afraid, thus it is not a serious bug, no one would take care about it in the next time (during my research I found an older post here on the forum about the same problem ...).
thanks for help in advance,
jobumac

In adobe bridge cs6 i would like to pre build the thumb nails on an entire drive inc sub folders

in adobe bridge i would like to build all the thumbnails for the drive so when i go to a sub folder all the iamges are ready to go. i have tried select all and then build hq thumbnail but it only did the images in the root folder i was in. not the sub folders. what am i doing wrong?
thanks,
michael

They're both wrong
In your dreams…
Maybe I did not understand the OP correctly but using build and export cache usually creates less free space (certainly) and more problems (very likely…) hence I never advice this route. On a Mac this means double cacheing, first in Central Cache (same as our answer before) and also extra cache in folders.

After IOS 8 upgrade on phone, documents no longer synch in Pages. I find out subsequently that when I upgraded it gave me iCloud Drive, which won't synch unless my computer has OSX Yosemite, which isn't available. Apple says they can't get me back.

Apple upgraded me to a new IOS that has now eliminated my ability to synch Pages docs which I've been using quite successfully. So now every time work in pages it tells me that my documents won't synch and to "upgrade to OSX Yosemite." The problem: Yosemite IS NOT AVAILABLE yet. Will they let me go back to the old way until Yosemite is available? No they will not. I'm stuck with devices that won't work together. I recall no warning that by upgrading to IOS8 would mess up my ability to use my devices as intended -- that my devices would be less compatible. I feel duped and manipulated. And to clarify, I only updated on my phone. Once I saw (subsequent to update) that my synching of docs would no longer work, I decided not to upgrade my iPad mini. But guess what -- just updating my iPhone has now changed me to iCloud Drive and that means that all of my devices are incompatible.

That happened to me. I rebooted and now my docs are back again.

Multiple apple ID's - iCloud drive and google drive?

I've got a variety of apple devices and am trying to work out the best way to keep documents in sync across them all. The ideal solution would be to use iCloud drive but my macbook and iPhone are on one apple ID and my wife iPad and iPhone are on another. I'd like to keep them on separate apple ID's as we have different contact groups and don't want to see iCloud tabs for each other, etc. Plus backing up 4 devices to one iCloud account won't leave much space for anything else and when Microsoft give out 30gb, google give out 10gb the 5gb iCloud allowance is pretty poor.
At the moment we use google drive to store all our documents and just access this on our devices via the drive app. I'd really like to switch to using iCloud drive as it'll mean I can use iWork more than office but there just doesn't seem to be a way to keep documents in sync across multiple apple ID's. Google drive also doesn't cater for iWork file formats so I can't simply save everything in there and just copy over to iCloud drive.
Does anyone have any bright ideas? Are there any third party iOS apps that will let you access items stored in icloud drive? I'd also thought about trying to use automator or applescript to copy a few select documents over to iCloud drive and convert to the iWork formats but I'm quite new to all that so not very sure where to start.
Thanks in advance for any suggestions.

I have a similar problem with this as well. For example, I like to keep the "contacts" of me and my spouse updated on both of our phones. In order for this to happen, I have to sign in to "icloud" on both devices & mac with my apple ID. It would be much better if this could be shared/combined with multiple devices as an option. I don't think "icloud drive" solve's this problem.

Editing and sharing custom metadata/keywords through Adobe Drive in Adobe Bridge

I am part of a four-person video production unit operating within a local governmental entity. We are currently using four licenses of Adobe Master Collection CS5, and are about to get access to dedicated SAN storage.
We would like each user to have the ability to assign specific keywords to any given video clip (or remove keywords from clips) within Adobe Bridge, and have the three other users see the same results. I've noticed that Bridge alone will allow for keywords to be added or removed, but this list is specific to each user. Importing one list into other users' profiles is a start, but would no longer work, once keywords are added or taken away.
The overview page for Adobe Drive 3 says that it, "allows users to edit and view custom metadata/properties through Adobe Drive in Adobe Bridge," but I haven't found any explanation in either the website, forums, or user's guides that delves any farther into this area. If we incorporate Adobe Drive/Bridge into our workflow, will we be able to share/sync keywords between users? Is there some other (affordable) solution that would let us do this?
Thanks for any insight you might be able to offer.
Chuck

Hi,
Thanks for sharing your case.
The keywords you mentioned is XMP metadata, if all your digital assets are managed by ADEP CQ DAM service, you can use AD3 with built-in ADEP connector to communicate with the DAM server, then, I think it can meet your requirement, it means, the keywords can be set by one user through metadata panel in Bridge, and can be viewed by other users.
for custom properites, it's different from XMP metadata, it refers to the properties of one asset which is managed by a Content Management service. users have to use another UI to edit/view them in Br after AD3 is installed.
here are some requirements to use it.
1) CMIS 1.0 compiliant server should be used to manage all your digital assets
2) use the built-in CMIS with AD3 to connect to the server.
if other kind of servers are used, you should develope a custom connector through AD SDK to enable custom properties feature as well as some other handler required by AD SDK
thanks

Viewing XMP Metadata in Adobe Bridge via Adobe Drive Connector

Hi there,
I've been trying to view remote file XMP metadata in Adobe bridge via our adobe drive connector. I've added the READ_XMP_METADATA capablitiy, and I've seen the DataType.XMP has been requested. but I'm not sure how to display the metadata on the Adobe bridge metadata panel. since the metadata is embeded in the file, when i browse the file in local drive, the metadata shows fine, but when it's on our remote server, some how bridge doesn't extract the info and display it. I can see the metadata when I browse the remote file in windows explorer adobe drive. and we do download the file to local to a temp copy, browse the temp copy in bridge also showing the metadata, The only thing not working is browsing the remote file in bridge via adobe drive connector.
Please advise what should be done, in the programmer's guide, it says for each item, request that the server return the XMP data for that asset. How should I do that? If the XMP is embeded in the file, why would I need to request for it, would it be automatically extracted from the file?
Thanks,
Katherine

Hi there,
I've been trying to view remote file XMP metadata in Adobe bridge via our adobe drive connector. I've added the READ_XMP_METADATA capablitiy, and I've seen the DataType.XMP has been requested. but I'm not sure how to display the metadata on the Adobe bridge metadata panel. since the metadata is embeded in the file, when i browse the file in local drive, the metadata shows fine, but when it's on our remote server, some how bridge doesn't extract the info and display it. I can see the metadata when I browse the remote file in windows explorer adobe drive. and we do download the file to local to a temp copy, browse the temp copy in bridge also showing the metadata, The only thing not working is browsing the remote file in bridge via adobe drive connector.
Please advise what should be done, in the programmer's guide, it says for each item, request that the server return the XMP data for that asset. How should I do that? If the XMP is embeded in the file, why would I need to request for it, would it be automatically extracted from the file?
Thanks,
Katherine

Adobe Bridge shuts down when I try to access files on my external drive. Have been using the drive for months with no problems.

Adobe Bridge shuts down when I try to access files on my external drive. Have been using the drive for several months with no problems.

Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I am having trouble with the Jpeg icons and also now thumbnails not being visable in bith teh Apple finder and now also Adobe Bridge. Can anyone shed any light on this ?

I am having trouble with the Jpeg icons and also now thumbnails not being visable in bith teh Apple finder and now also Adobe Bridge. Can anyone shed any light on this ?

Argh - once again, I find my solution right after posting this. Left out one modification to the SWIG script, now it runs in 29 seconds vs C 16 seconds, I can live with that.

Adobe Bridge CC locks out my access to hard drive after opening-window shows lock but will not unloc

Why does my user window show locked after opening Adobe Bridge CC? I can access all other external drives...

What are you calling the user window? If the Folders view this should be same a OS view of folders.

Developing: Endless loop in Adobe Bridge with and Adobe Drive CMIS Connector

Hi
Currently I’m implementing a CMIS-Server for the dam system of my company, using the apache chemistry framework. One of the main requirements is that adobe drive works with it.
At the moment I implemented only the navigation services (getChildren, getObject, …) and the repository services and test them against adobe drive. It’s already possible to navigate through folders and read assets with ad4 and the finder. So 3 days ago I installed adobe bridge (CS6) and test my server again.
My test environment is very easy.
root(1 object)->test1(0 objects; empty)
First I’m opening my repository with adobe drive and then I switch to bridge and connect it. Bridge shows me the folder test1 with no errors. So I double-click it and now bridge is in an endless loop. The notification switch between ‘Keine anzuzeigenden Elemente’(No elements to show) and ‘Einen Moment bitte, die Suche läuft …’(Searching, please wait …). This only happens in bridge. When I open the folder with the finder it just works, without the loop.
So I logged all requests, which were send by adobe drive, and get this list.
Connecting with adobe drive
getRepositoryInfos
getTypeChildren (null) -> all basetypes
getTypeDecendants (cmis:document)
getTypeChildren (null) -> all basetypes (Why two times?)
getTypeDecendants (cmis:document) (Why two times?)
getRepositoryInfos (Why two times?)
getObjectByPath (/.hidden)
getObjectByPath (/.hidden)
getObjectByPath (/.hidden) (Why so often?)
getObjectByPath (/DCIM)
getObjectByPath (/mach_kernel)
getObjectByPath (/.Spotlight-V100)
getObjectByPath (/.metadata_never_index)
getObjectByPath (/.metadata_never_index_unless_rootfs)
getObjectByPath (/.metadata_never_index)
getObjectByPath (/mach_kernel)
getObjectByPath (/.metadata_never_index_unless_rootfs)
getChildren (cmis:folder,0) (rootfolder) returning only one element (test1)
getObjectParents(cmis:folder,127) (test1) returning the rootfolder
getObjectByPath (/.hidden)
getObjectByPath (/mach_kernel) …
Open the Cmis repository in bridge and doubleclick the repository
getChildren (cmis:folder,0) (rootfolder) returning only one element (test1)
getObjectParents(cmis:folder,127) (test1) returning the rootfolder
Then I double click the test1 folder
getObject(cmis:folder,127)(test1)
getChildren(cmis:folder,127) -> empty list
… (endless loop)
I already checked getObject and getChildren against a reference implementation (FileShare Repository of apache Chemistry) and it returns exactly the same structure. Only the name and the timestamps are different. So my second though was to check the repository capabilities and as well they are both equal. Now I’m a little bit desperate because I spend already 3 days in try and error bugfixing but nothing worked. So here are my questions.
Is there a logfile for bridge because I thing this refreshing happens after an exception. I already checked the adobe drive log and it contains only asset not found errors for (e.g mach_kernel …).
In which circumstances does bridge reloads a folder?
Debugging of adobe drive: I already read http://forums.adobe.com/message/3928595 but it doesn’t work in AD4 any more, I only get info/error/fatal messages.(I changed the log4j config files in AD4ServiceManager.) Does something changed or did I forget something?
Why does AD4 make 2 or more times the exact same request? (Look table above).
I hope my English is good enough to understand.
Thanks

After two months I'm a little bit smarter so I can answer some of my question by my own.
No there is no logfile for bridge, but I was able to debug the scriptcode from the ad plugin, which is installed in bridge.
If an error occures in the plugin
I was able to decompile the cmis connector. That helps a lot when ad logs with weird exceptions.
Because AD maps the actions of the filebrowser(finder,explorer) to cmis and this one does sometimes the exact action two or more times.
Unfortunately is wasn't able to fix my main problem, but I found a workaround to use cmis in bridge. I deactivated the ad plugin in bridge and after that action, bride display the cmis volume as normal volume. Sadly some actions like to manage relationships etc. are with this workaround not usable but for me this is alright.

Adobe Bridge und Apple icloud drive

Similar Messages

Maybe you are looking for