Adobe Camera Raw has a bigger picture ratio than the original Canon CR2?

This one is processed by the Adobe Camera Raw:
this is the JPG processed by the Canon camera:
When I view the CR2 files in Canon software, it shows the same as the 2nd JPG posted above. However, when CR2 files were in Adobe Camera Raw, all the photos are slightly enlarged, I did not apply any lens profile correction, how to fix this problem?
Thanks

Look at the bottom of the Lens Corrections - Profile tab and see the notification about built-in lens corrections being applied, then click on the and see exactly what those corrections are:
Without any lens corrections the G1X2 has severe distortion:
Both Canon and Adobe are doing lens corrections and there must be slightly different math involved so the corrections aren't exactly the same.

Similar Messages

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

I am trying to download the Adobe Camera Raw 7.1 upgrade for CS6. The files will not unzip.

I am trying to download the Adobe Camera Raw 7.1 upgrade. The zipped files download, but when I try to extract the zipped files, I get an error message saying that there is already a file with the same name as the folder name I specified, and that I should specify a different name. The four zipped components are META-INF [Folder], payloads [Folder], AdobePatchInstaller [Application file\, and payloads [File]. Evidently, there is a conflict between the payloads folder and the payloads file, but I cannot be sure. All filenames came from the download.

Are you using CS6 applications ? Camera Raw 7.1 is only compatible with CS6 applications. Try this as mentioned on http://www.adobe.com/support/downloads/detail.jsp?ftpID=5391
For Photoshop CS6 and Creative Suite 6 customers, we recommend that you install Camera Raw 7.1 by selecting Updates from the Help menu and follow the on-screen dialogs to download and install the latest available Camera Raw update. You can also click the link below to download an installer that replaces the existing Camera Raw plug-in with Camera Raw 7.1 for all CS6 applications.
Thanks
Nikhil

Adobe Camera Raw in CS3 is having problems with the RAW files from my Canon 5D Mark II

Adobe Bridge will import the CS2 raw files from the camera card in m Canon 5D Mark II but it will not create thumbnails nor will it convert them to DNG. I want to update the raw reading software but the update page indicates that it only updates into CS4. Will I have to upgrade to CS4 before I can import from my new camera?
ML

The dng converter does indeed work but it adds an extra step to the workflow. Raw files from my Canon 40D are exported and converted to dng in Bridge in one step. Now I must add the extra step of using dng converter. Can I upgrade Adobe Bridge's raw capacity so that I can import from my new camera in the same efficient way? I would prefer to do this without buying CS4.
thank you -- ML

Exported mp4 or flv has much smaller frame size than the original

Not sure if I started the project the wrong way or if I'm doing something wrong when I export.
My imported file is an mp4 29.87 fps 44,100Hz 16 bit stereo.
480x360
When I export it as an flv or mp4 the image is about the size of a postage stamp surrounded by a huge black border.
Any help would be much appreciated.
I'd rather export and flv.
Martin
P.S. I'd like the exported size to be around 390x214 or something a tad smaller than 400 wide.

Thank you Hunt for your reply.
I was an editor for 30 years (Michael Redbourn) and did some editing on Premiere a few years back for a client, but somebody set up the pre-sets and did the export for me, so as is obvious I know next to nothing about how to do either.
What is your Sequence Preset? Does it match that Source Footage?
I didn't see any preset that matched 44,100 hz
How can I check to see what my sequence preset is?
In those Export formats, what are the Presets used?
What are the settings for the Frame Size options?
In those formats, if you chose, say a DV Preset, and did not do cropping, you would get what you describe.
I tried several and certainly one of them was a DV preset, and I didn't crop.
The answers to the above questions should give others something to work with, and likely get you a solution to the issue.
I'm really just experimenting with a short sequence and to reedit it will be really simple, so if you could tell me which presets and export settings to use, I will redo the project and learn a lot at the same time.
Original clip is an mp4 29.87 fps 44,100Hz 16 bit stereo 480x360
I'd like the exported size to be around 390x214 (preferable .flv) or something a tad smaller than 400 wide.
Thanks again,
Michael

Problem accessing adobe camera raw in Bridge for CS6

I have a problem accessing adobe camera raw in Bridge (CS6) directly, I get the message: "Bridge's parent application is not active; Bridge requires that qualifying product has been launched at least once to enable in Bridge or Accessing Photoshop directly, I get the message: "Bridge's parent application is not active; Bridge requires that qualifying product has been launched at least once to enable this feature." My software is registered with Adobe. Any solutions?feature." My software is registered with Adobe. Any solutions?

Creative Suite Cleaner Tool laufen lassen, neu installieren. Und was auch immer für ein dämliches Update den Schaden verursacht haben mag einfach nicht aufspielen, wenn nicht unbedingt nötig...
Mylenium

+++ Adobe Camera Raw - Frequently Asked Questions +++

Q: Is my camera supported by Adobe Camera Raw (ACR)?
A: Here is the list of cameras officially supported by the current version of Adobe Camera Raw and Digital Negative (DNG) converter. The page also provides links to the current version of ACR and DNG converter for both Mac and Windows.
Q: what version of Camera Raw should I install?
A: Photoshop CS6: see first question.
Photoshop CS5: Camera Raw 6.7 Win | Mac
Photoshop CS 4: Camera Raw 5.7 Win | Mac
Photoshop CS 3: Camera Raw 4.6 Win | Mac
Photoshop CS 2: Camera Raw 3.7 Win | Mac
Photoshop CS: Camera Raw 2.4 Win | Mac
For Photoshop Elements, Windows:
Photoshop Elements 10: (See first question)
Photoshop Elements 9: Camera Raw 6.5
Photoshop Elements 8: Camera Raw 6.2
Photoshop Elements 7 and 6: Camera Raw 5.6
Photoshop Elements 5: Camera Raw 4.6
Photoshop Elements 4: Camera Raw 3.7
Photoshop Elements 3: Camera Raw 3.6
For Photoshop Elements, Macintosh:
Photoshop Elements 10: (See first question)
Photoshop Elements 9: Camera Raw 6.5
Photoshop Elements 8: Camera Raw 6.2
Photoshop Elements 6: Camera Raw 5.6
Photoshop Elements 4.0.1: Camera Raw 4.6 ( 4.1 under Mac OS 10.3)
Photoshop Elements 3: Camera Raw 3.6
Q: What version of Camera Raw started to support my camera?
A: This page: http://www.adobe.com/go/kb407111 lists when support for the raw files of your camera was added in Camera Raw. If the version listed is higher than the one supported by your version of Camera Raw, you first need to convert the files to DNG using the latest version of the DNG converter in order to open them in Camera Raw.
Q: I do not have the latest version of Photoshop, how can I open the Raw files from my new camera?
A: Only the current version of Photoshop will receive ACR updates that add support for the latest cameras. However, you can download the latest version of the DNG converter, and use it to transform your raw files to the universal DNG format. Camera Raw 2.4 in Photoshop CS and all newer versions of Camera Raw compatible with your version of Photoshop will be able to open the DNG files. Photoshop 7 and ACR 1.0 do not support DNG, therefore you will need to upgrade to the latest version of Photoshop.
Q: When will the new update of Adobe Camera Raw be released?
A: Adobe cannot comment on unannounced products, however, it is expected that ACR and DNG converter will be simultaneously updated 3 or 4 times per year (i.e. every 3 or 4 months).
Q: What does "Unofficial Support" for a camera mean?
A: Unofficial support means that Adobe's Quality Engineering department has not tested the support to the degree that they want, and thus cannot guarantee the results. So we don't include the camera in our official lists, and don't provide any technical support. Unofficial support means "use at your own risk".
Q: How do I know that Adobe Camera Raw is installed correctly?
A: For Photoshop CS customers, the most efficient way to ensure that you have the latest Camera Raw update installed correctly is to choose the Updates option from the help menu. For Photoshop Elements customers the best way to verify that the Camera Raw plug-in is installed correctly is to make sure it appears (only once) in the "About Plug-in" menu (see: Photoshop menu on a Mac or Help menu on a PC). The correct version is displayed when you pick its name and see its about box. If "Camera Raw" is not in this list, you have not installed it correctly.
Q: Why is the profile listed in the Calibration tab showing a version of Adobe Camera Raw that's older than I am using ?
A: What you are seeing is normal, and is due to the fact that the built-in profile for your particular camera model hasn't changed between that version of Adobe Camera Raw and the version you're using now. If you see the profile listed as "beta" then your camera has only unofficial support.
Q: Why is there more than one profile listed in the Calibration tab of Adobe Camera Raw?
A: The built-in profile for your particular camera model has changed since it was first supported. The profile shown by default identifies the latest version of Adobe Camera Raw in which the profile was updated. Other profiles in the drop-down list identify those included with earlier versions of Adobe Camera Raw, and are available in case you want to maintain compatibility with earlier versions.
Q: My camera is listed, but Photoshop cannot read its raw files.
A: Download and install the most recent update to Adobe Camera Raw.
Q: Where can I download the latest version of Adobe Camera Raw?
A: Adobe Camera Raw for: Macintosh and Windows
Q: I am trying to replace my existing ACR plug-in with a more recent version, but cannot find ACR in my Photoshop/Plug-in/File Formats folder. Where is it located now?
A: As explained in the "Readme", which can be found on the ACR download page, the correct location is:
Photoshop CS2
Mac: /Library/Application Support/Adobe/Plug-ins/CS2/File Formats/
Win: \Program Files\Common Files\Adobe\Plug-ins\CS2\File Formats\
Photoshop CS3
Mac: /Library/Application Support/Adobe/Plug-ins/CS3/File Formats/
Win: \Program Files\Common Files\Adobe\Plug-ins\CS3\File Formats\
Note that "Common Files" is localized in non-english versions of Windows.
Q: Why do I only see a small generic icon in Adobe Bridge instead of a thumbnail when I browse the folder containing my RAW files?
A: Bridge occasionally has difficulty with RAW files, but this is usually because the user has installed ACR into the wrong location or browsed the folder prior to installing the ACR plug-in that provides support for their particular camera model. The fix for this issue is usually to make absolutely sure that ACR is installed correctly, then purge the Bridge cache. If you're in the habit of using the Distributed cache (Bridge 1.x) it would be prudent to manually delete the cache files from the folder containing your RAW files.
Q: Whenever I open an image in Adobe Camera Raw a small explanation mark within a yellow triangle appears in the upper right hand corner of the image.
A: This symbol indicates that a high quality preview is being generated by Adobe Camera Raw. It should disappear after a couple of seconds.
Q: How do I turn off Auto Adjustments in Adobe Camera Raw 3.x?
A: Open Adobe Camera Raw. On the Mac press Cmd+U or on the PC Ctrl+U. This keystroke combination toggles Auto Adjustments On and Off. Alternatively, disable the Auto Adjustments setting from the fly-out menu adjacent to the Setting drop-down menu. If you want the default to be Off for Auto Adjustments simply choose "Save New Camera Raw Default" from the fly-out menu adjacent to the "Settings" drop-down menu then choose Done.
Q: What about Adobe Camera Raw 3.7 and newer versions?
A: Camera Raw 3.7 no longer supports per slider auto adjustments. One Auto control at the top of the panel now sets the Exposure, Shadows, Brightness, and Contrast sliders to their auto values. The Default control at the top of the panel sets these same four sliders to their default values. The keyboard shortcut for the Auto control is CMD/CTRL-U.
The keyboard shortcut for the Default control is CMD/CTRL-R.
Double clicking on a slider to set that single slider to its default value.
Shift double clicking on a slider to set that single slider to its auto value.
Q: Why do I get the the following message: "Unable to create an .xmp sidecar file. The image settings will instead be stored in the Adobe Camera Raw database."
A: This message means that Adobe Camera Raw is unable to write to the XMP sidecar file. Either the media is read-only (e.g. a CD), or you don't have write access to the folder containing the image, or the existing XMP sidecar file is locked.
Q: I cannot see all the tools and buttons of Adobe Camera Raw.
A: Set your monitor resolution to the minimum required for Photoshop CS and higher, i.e. 1024x768.
Q: Where can I obtain a listing of Adobe Camera Raw keyboard shortcuts and modifiers?
A: On the Photoshop online help file.
Q: When I open my Nikon NEF files, all I see is the simple version of the raw dialog.
A: You are running Nikon's plug-in, not Adobe's. Delete from Photoshop's plug-in folder and all subfolders all copies of the "Nikon NEF plugin". Nikon automatically installs this plug-in in up to two places inside Photoshop's plug-in folder, and both must be deleted. Otherwise it overrides the Adobe plug-in. An alternative to the deletion is adding ~ in front of the Nikon plug-ins names.
Q: I installed the update. I can now open my raw files, but I still cannot see thumbnails in the file browser.
A: Purge the file browser cache for the problem folder. Tools > Cache > Purge cache for this folder.
Q: Is it better to resize my images in Camera Raw, or in Photoshop?
A: The resampling code is fairly similar to (but not exactly the same as) the "Bicubic Sharper" resampling in Photoshop CS and CS2. It does not make very much difference which stage you do the resampling in. The exception is non-square pixel cameras (Nikon D1x and Fuji S2 Pro), for which it is best to upsample one size step in Camera Raw if you need a larger image.
Q: What are raw images, and how do they differ from JPEG ones?
A: Read this whitepaper (1MB PDF) written by Bruce Fraser for a concise answer.

You can check compatibility yourself:
1. Go to this page to see the different releases: http://forums.adobe.com/thread/311515?tstart=0
2. Navigate into the download link for the appropriate version of Camera Raw.
3. Follow the link to the ReadMe (e.g., http://www.adobe.com/special/photoshop/camera_raw/Camera_Raw_4.6_ReadMe.pdf).
4. Look to see whether your camera is supported.
5. If your camera is NOT supported, you can use the free Adobe DNG converter to create .dng files that your Camera Raw will be able to open.
Photoshop CS6 is anticipated to be out in a few months, and Camera Raw is supposed to have a whole new approach, so a lot of us are excited about anticipating that.
-Noel

Is Photoshop CS5 compatible with the new Adobe Camera RAW 8.6?

Is Photoshop CS5 compatible with the new Adobe Camera RAW 8.6?
I am using the new Nikon D810. Adobe Camera RAW has this new camera included. But I cannot open the NEF files in Photoshop CS5

NO

Aperture vs Adobe Camera Raw

Hey,
So, lately I've been shooting in RAW and have finally found some time to process some of the images. I am a Mac user, so I have the option of using either Aperture, or Adobe Camera Raw (Lightroom). Can someone please explain to me the main difference between the two programs, in terms of their ability to retouch/edit RAW images. I've had experience with Adobe Camera Raw (through photoshop cs6) and believe it is an excellent piece of software, does Aperture provide the same kind and quality of tools. The reason I am asking is because while I need a program to help process the RAW files, I also want to organize them in a library where I can see my edits. I am currently using iPhoto and I like the way it works.
So to summarize the question, is aperture as good at processing/editing RAW images as Adobe Camera Raw? If not, why, what are the differences?
Thanks!

So to summarize the question, is aperture as good at processing/editing RAW images as Adobe Camera Raw? If not, why, what are the differences?
Much of the difference between the two has to do with the way brushes work (for local adjustments) and some features.
Brushes:
In ACR, the adjustment brush works as a multi-parameter brush where you brush in strokes and can adjust quite a few parameters after adding the brush stroke (e.g., exposure, highlights, shadows, sharpening, noise reduction, clarity, saturation, etc.). ACR adds a 'pin' for each new adjustment which can then be selected to change the parameters of that adjustment.
In Aperture, you use what is called a 'brick' which is a panel dedicated to the type of adjustment (e.g., enhance, highlights & shadows, edge sharpen, noise reduction, etc.). In this case, you use each 'brick' (or panel) to change the brushed in parameters for that specific type of adjustment.
In summary; you can add or change more parameters in ACR with one brushed adjustment than you can in Aperture, but both can add or change the same parameters (with the exception of exposure, which Aperture doesn't currently do as a local brushable adjustment).
ACR has arguably better sharpening and noise reduction control. ACR also has a gradient tool and lens distortion correction which Aperture currently lacks.
I do find that brush speed is about the same with a lot of adjustments added, with Aperture getting better marks overall.
All that said, I would be surprised if Aperture didn't receive some of the tools it currently lacks in the future.
As far as RAW decoding goes, Aperture relies on the OS X camera RAW compatibility feature to render RAW files, so you will already have a sense of what that default render is like with iPhoto and Preview. Aperture can alter those parameters either as a RAW fine tuning preset that you create or with the adjustment bricks.
FWIW, I have been using Adobe ACR at work (on Windows) since it's inception; and while I like the results with some images with regards to highlights, shadows, sharpening and noise, I can get there faster with Aperture. I also don't agree with Adobe's new rental policy for the CC line, so won't be investing in their products anymore. I quite like the 'App Store' paradigm.
Hope that helps.

I am unable to open raw files from my Canon T1i in Adobe Camera Raw of my version CS3 of Photoshop. I have tried to update my ACR by downloading version 4.6 from the Adobe website but I am still unable to open raw files, just JPEG. Is there a way to use

I am unable to open raw files taken on my Canon Rebel T1i in my version of Photoshop CS3. When I import raw files into Bridge they come up as patches with CR2 on them and when clicked on, a notice comes up stating that Photoshop does not recognize these files. I tried to update my Adobe Camera Raw by downloading version 4.6 from the Adobe Website, but when I clicked on the plus-in, I got another message that Photoshop does not recognize this file. I spoke with a representative from Canon who said that I could not update CS3 and that I should subscribe to the Cloud. I would prefer to use my CS3, if possible. Can anyone advise me what to do?

The T1i was first supported by Camera Raw 5.4 which is only compatible with CS4 and later
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Some options:
Upgrade to CS6
Join the Cloud
Download the free Adobe DNG converter, convert all T1i Raw files to DNGs then edit the DNGs in CS3
Camera raw, DNG | Adobe Photoshop CC

Adobe Camera Raw - Cancel a crop or straighten - ESC not working

Hey Guys,
I am trying to learn photoshop for the first time. I currently have Photoshop CS5.1, but am thinking about upgrading to CC in the near future. I have been following along with tutorials on Lynda.com in order to learn all of the functionality of the program.
I am currently in the section learning about Adobe Camera RAW and how to utilize it. The instructor was talking about using the straighten tool or crop tool and how it is not destructive to the image at all. He says to click on either tool and then hit the ESC key to revert the changes that you made. However, when I do this, it exits me out of Adobe Camera RAW all together. I thought initially that it might be because I was in full screen mode, but i hit the F key and tried it again with the same outcome.
What am I doing wrong? How do I fix this?
Thanks in advance.

R_Kelly wrote:
Hi,
If you open an image in camera raw, draw out the crop tool and then press the Esc key, what happens?
I just messed with it further tonight. It looks like it is working correctly with the 'Crop' tool. However, it is not working correct with the Straighten tool. I use the straighten tool, click enter to straighten the image. If the image does not look correct to me, I click on the straighten tool again and hit the ESC key to revert it back to the original. As soon as I hit the ESC key (while clicked on the straighten tool) it closes out of Adobe Camera RAW and goes back to Adobe Bridge.
Which operating system are you using?
I am using OS X 10.10.1 (Yosemite)
Which version of camera raw are you using?
I am on Adobe Camera RAW Ver. 6.7
Both Photoshop and Bridge are CS5.1
You can see the version listed at the top of the camera raw dialog when not in full screen mode.

Adobe Camera Raw in PE13.0

I have just recently purchased a Canon EOS 7DMkII camera and have downloaded a trial version of PE13 only to find that PE13 does not recognize that RAW format used on my new camera.
According to what I have been able to discern, PE13 is delivered with Adobe Camera Raw 8.5. Also, according to the Adobe website, Adobe Camera Raw 8.7.1 supports the EOS 7DMkII camera.
Does anyone know whether or not there is a download of Adobe Camera Raw 8.7.1 for PE13?

I just went back and tried the update again and this time it attempted to update to Camera Raw 8.7 but the update failed with the following error message:
Adobe Photoshop Elements 9.0.3 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200

What is the newest version of Adobe camera raw for PSE 11?

Wat is de nieuwste versie van Adobe Camera Raw voor PSE 11? What is the newest version of Adobe Camera Raw for PSE 11?

Camera raw 7.4
FAQ: Will Photoshop Elements work with my camera, or Why won't my raw files open?
You should be able to use Help>Updates from within the pse 11 editor to get camera raw 7.4 if you don't already have it.
You can use the 8.7 dng converter if your camera requires a newer version of camera raw
windows
Adobe - Adobe Camera Raw and DNG Converter : For Windows
mac
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh
If you have windows xp , vista or mac os x 10.6.8, then use the 8.3 dng converter
how to use the dng converter
Camera Raw: How to use Adobe DNG Converter - YouTube

I have downloaded Adobe camera raw 8.4 so that I can open raw files with pictures taken with the Sony a6000 camera. However it is not opening the images in camera raw. What can I do?

I have downloaded Adobe camera raw 8.4 so that I can open raw files with pictures taken with the Sony a6000 camera. However it is not opening the images in camera raw. What can I do?

Close and restart Photoshop if you have not already done so.
In Photoshop, go to the Help - About Plug-in... menu then choose Camera Raw. What version does it say there?
-Noel

Has anyone else noticed that Adobe Camera Raw 7.x exhibits odd behavior compared to version 6.x?

I have found no discussion of this subject on Adobe's forums, so I am asking here. I find that Adobe Camera Raw 7.x's "auto" mode frequently produces overexposed images with lots of blowouts necessitating much more manual tweaking than was required with the older 6.x series of plug-ins. Has anyone else noticed this behavior?

I have found no discussion of this subject on Adobe's forums, so I am asking here. I find that Adobe Camera Raw 7.x's "auto" mode frequently produces overexposed images with lots of blowouts necessitating much more manual tweaking than was required with the older 6.x series of plug-ins. Has anyone else noticed this behavior?

Adobe Camera Raw has a bigger picture ratio than the original Canon CR2?

Similar Messages

Maybe you are looking for