Adobe Captivate 5.5 and Neo Speech: issue to use Paul voice

Hello,
I have installed succesfully Adobe Captivate 5.5 and then Neo speech Add-on. But unfortunately, when using Speech management function, I can't find Paul and Kate voice. These voices are not proposed in the voice list while the installation has suceeded.
A Kate and Paul directories have been install under Adobe Captivate 5.5 but I don't know why these voices seems to be not installed.
My PC uses Windows XP, default language = french. Adobe Captivate has been installed in English.
Thanks for your support,
Odile

Hi,
First I have installed Adobe Captivate 5.5.
Then I have installed Neo spech.
I have restarted my PC, then launch Captivate: Paul and Kate voices are not present in Speech Manager. And I have no special error message, only voices missing.
After that I have installed Loquendo speechs.
Launch again Captivate and see that Loquendo voices are pesent in Speech Manager.
Now I will show you Neo Speech install report, installation done after an Captivate application stop:
The installation has succeeded in the good directory.
When installing Loquendo the report is not really the same, it seems that some additional execution are done:
Following other discussions on the forum, I have looked at my Windows Control Panel Voice and see that 3 voices are proposed. I assume that these are Windows voice. I didn't find Stefan, Simon, Kate or Paul voices and I'm not ablle to add or configure something.
If someone has an idea of the issue

Similar Messages

Why is the download "Not applicable" for my online purchase of Adobe Captivate 8 Student and Teacher Edition for Mac?

I purchased “Adobe Captivate 8 Student and Teacher Edition” for Mac on 7/31/14 and it is now 12/17/14 (only 5 months later) but it is showing as “Not applicable” when I go to download (maybe re-download) the program. I understood that I would be able to use the application on 2 computers, one at home and one at work. I think I’ve downloaded the program at home one time but have yet to install and activate it. I now have a new computer at work that can support that program and want to install the program on my office computer, but cannot download it again. Please advise.

It seems like that you have purchased a subscription for Captivate 8. In subscription you do not require any serial number. Subscriptions are activated on the basis of your Adobe Id. When user will install Captivate he has to sign in with the same Adobe Id under which they bought subscription. It will get activated after successful sign in during the installation.
As far as the installer is concern there is no difference in the trial version installer or purchased version installer. The installer is same for trial and purchased copy. All user needs to do is sign in during the installation if it is a subscription or use his serial number if it is a perpetual license or volume license.
You may download the trial version from the link mentioned above and then use your Adobe Id to activate the subscription.
Please let me know in case you need any further information.
Regards,
Rajeev.

Adobe Captivate full price and other details

Adobe Captivate full price and other details like inclusive for how many years and is it for multiple users?

Hello
Adobe Captivate 8 can be bought on a variety of licensing models such as perpetual or subscription and the pricing will depend on the volume you buy.
For a single retail license - the perpetual software (you own it for perpetuity) is prices at $999 in North America and the single subscription license is available for $19.99/month for an annual plan in North America. If you have more extensive licensing requirements - please send us an email on [email protected] and we will have someone assist you.
Regards
Adobe Captivate Team

Adobe Captivate 6 Spanish text to speech

Hi we are using Adobe Captivate 6. We were wondering if there is an option to get text to speech in Spanish language. We are currently using NeoSpeech which provides German, French and English (couple of accents).
Are there any alternatives to this?

Hello,
Welcome to Adobe Forums.
Spanish Text to Speech is not available as an add-on for Adobe Captivate.
You can purchase Spanish Voice from NeoSpeech.com and Loquendo.com.
Thanks,
Vikram

Please provide link to download Adobe Captivate 5.5 Text-to-Speech

Adobe Captivate 5 text-to-speech converters download link url?

Your user account --> My Products or this: http://prodesigntools.com/tag/ddl
Mylenium

Adobe Captivate 8 serial number message preventing me from using right product

I wanted to download Adobe Captivate and accidentally purchased the Captivate 8 Upgrade.
I discovered my error when I was prompted to "upgrade" a qualifying product that I did not own.
I then downloaded the trial version, in order to demonstrate the value of the commitment (show my employer what the program could do) but the prompt to select a qualifying product keeps preventing me from accessing the trial version.
I have spoken with tech support and the cancellation of the original purchase is supposed to have begun/completed.
Now I can not launch the trial or full version as it continues to auto detect the upgrade verification code and states it can not find a product to upgrade.
thanks,
Joe

I understand that, however...
When I launch the trial version (I want to create something to show before I spend money on our company's account) I am asked to sign in and immediately taken to this screen.
I have no option to proceed.
Joe

Adobe Photoshop 7.0 and 10.5 issues

I've installed an upgrade of Adobe Photoshop 7.0 successfully and every time I start the app, I get this:
"An unexpected and unrecoverable problem has occurred because of a program error. Photoshop will now exit."
I ran the Verify Permissions and Repair thing in Disk Utility, but I am still getting it. Anyone else having this issue?

If you don't like the price of the latest-and-greatest CS4, CS (aka 8.0 or CS1) can often be gotten very cheap on the resale market, just be sure to get one with a clear license if you care to upgrade later.
Apparently, CS was the version Apple used while building Rosetta, so the original CS apps work very well on 10.5 Intel. No, not as fast as CS2 and CS3, but stability can be preferable to speed.
If you install CS on 10.5, be sure to disable Adobe Version Cue in the installer; it never worked right, and most of us would never use it even if it were installed, so it's no big loss.

Adobe Reader XI Signature and touch monitor issue

Hi. I am trying to utilize signature feature on this new Adobe Reader XI. When I first tried this at a local Microsoft Store, it worked beautifully and I immediately downloaded the software on my computer (Windows 7; touch screen computer). Upon installing them, however, I cannot get my finger to sign just as I was able to do before at the Store. It just won't let me sign on the box (but I was able to do it using a mouse). I thought it is perhaps a Windows issue and I tried it with my friend's Windows 8 computer. However, same problem occurs. What would be a possible solution to this issue? Thank you very much!!!!

Use the forum for Adobe Reader.

Adobe Captivate Help | Drag-and-drop interaction (for subscription and Adobe Software Assurance customers only)

This question was posted in response to the following article: http://helpx.adobe.com/captivate/using/drag-and-drop-interaction.html

Yep. But it will only likely get to you in the next version released for NON subscription or ASA customers. With 6.1 Adobe was giving a preview of the functionality they would be including in your next release. Either way, whether you upgraded to the subscription edition or waited for the next paid upgrade, you were always going to be paying something to get this new functionality. 6.1 users just got it earlier than everyone else. That was Adobe's decision. It certainly hasn't been a popular one.

Adobe acrobat pro 9 and windows 8 issues

Looking for help regarding adobe acrobat 9 and windows 8. I am unable to scan will not allow me to select devise (HP officejet pro 8500 wireless). Also unable to scan from HP device to PDF using HP solution center. Printing fine from other applications. Thank you.

lorrainetexas wrote:
Also unable to scan from HP device to PDF using HP solution center.
This means that your scanner software or driver is not correctly installed.

Adobe AIR dynamic sound and recording delay issue

I'm writing mobile application with Adobe AIR. The application use AIR Microphone API to record sound to file and later replay it.
The problem manifest only on mobile devices, not simulator. Specifically only on iOS devices, android devices seem to work OK.
Sometimes the recorded sound is missing samples. I know this because I use iFunBox to copy the recorded file to another application that replay it. The dropped frame manifest during playback as very fast audio because only part of the samples were recorded.
Sometime the playback is to slow which manifest as very slow audio. I know this because when the recording is fine and the other application play the sound right or when I take a file I recorded in the simulator (which run on my MacBook) and it only play slow on the mobile device.
How can I make sure the sound is good even when the application is a bit busy?

A little bump.
I still haven't found any solution to this.

¿Cuál es la diferencia entre Adobe Captivate for teachers and alumns y la versión normal?

Qusiera saber la diferencia para saber cual conviene más, soy diseñador pero trabajo en una institución educativa y hacemos manuales interactivos para manejar softwares nuevos

Tendrás que llenar los requisitos para tener derecho a usar la versión educativa.

Using Adobe LiveCycle Designer ES and secure parts of form using signatures.

Hi to all ...
I have upgraded to new LiveCycle Desinger 8.1 few days ago, and still do not know all the new features.
I was requested to develop new LiveCycle Form, but this time it has to be secured by Digital Signatures or what every appropriate method.
The form has exactly 2 sections and 2 Digital Signatures:
1. The first section/part is to be filled by the Staff (let us call him the Authoring Staff).
Any one can fill the first part.
After the first part is signed, the Data Entry on the first part should be locked, and no one on Earth should be able to change the data on the first part. Only the signer of the first part is allowed to update/clear the signature but only and only of the Second part is not yet signed.
The staff should not be allowed to sign the form unless all mandatory fields and other validation logic is statisfied.
Only the Signer of the Form and special authorized staff/group of staff will be allowed to open the form. Let us call them Group01.
2. The second section/part is to be filled by special authorized staff/group (say Group02), they are basicall HR Staff (this is a secret).
The second part can only be filled if the first part is filled and signed by the Authoring Staff.
The second part can be signed only if the validation logic on the second part is true (no errors, and all mandatory fields are filled).
Once the second part is signed, the first part the the second part should be locked, and no one on earth should be able to change anything on the form.
Only the signer of the form should be able to clear the signature of the 2nd part and make any changes requried.
If the 2nd part is signed, the Authoring Staff should not be able to change anything on the form.
*****End of Requirements.*****
I have just started, and I am requested to desing the form and implement the required security in 10 days only.
Can any one please help me ?
I am doing my research now.
Thank you.
Tarek.

Dear Dfoto,
Thank you so much for being so kind to spend the effort and reply back, I though my question was left behind the sun... but now I am very happy in deed.
To be more specific, the Form has 2 parts. The first part "Subform1" any one can fill and sign.
The second part "Subform2", only certain users can fill and sign.
I think I found a very strong lead to my solution, when I was playing with LiveCycle Desinger few days ago.
On the Singature Field Advanced Setting, there is a place you can attach the public part of a certificate (Digital Signature) of any user, one or more.
In this part, you tell LC that only those users "signing parties" can sign the field. I tested it and it worked.
Now, if I can use this feature via JavaScript to find out if the user who is filling the form, can sign this field, then he can fill the form. If he cannot sign the field, then he cannot fill the form. I can do that by setting the "access" property of the Subform. Another solution is that I can prevent the user from hitting the "Submit" button unless he signes the designated Signature Field.
I have another small issue:
I found out that if the Signature field is part of a repeating dynamic Subform, it will not work during run-time. Very bad in deed. While I cannot understand why ?, I tool this as "By Desing" feature.
Now, if the Signature is locking parts of forms which has dynamic content (repeating subforms), it will always show somthing like "Signature is corrupted or form was changed after it was signed".
Is this normal ? Is there a way to control Dynamic Forms using Digital Signatures without such annoying issues ?
Thank you.

Adobe Captivate 6 Content master slide order changes when used

Hi,
I'm using Captivate 6 to create a template. I made a content master slide with a specific order.
But when i insert this content master slide, the object order changes.
Is this normal? And is there a (simple) way to fix this?
Thanks in advance

Thanks for your repy,
the exact version is captivate 6.0.1.240
This is the content master slide i made:
This is what happens when i insert the slide:
I'm experiencing the same problem when i insert the slide on a blank project.

E6750 and P965 Platinum issues (Resolved using bios 1.6)

Hi guys & girls,
Here is system:
Intel Duo 2 Core E6750 (2.66Hhz) with Thermalright Si-128 and Arctic Cooling 120mm (Zalman STG1 paste)
MSI P965 Platinum mainboard (Worked fine with E6600 and OC'd to 3.4 stable)
2Gb Corsair ddr2 800 (4 x 512Mb matched pair kits 5-5-5-15 nice relaxed timings)
PNY 7800GT 256mb Pci-Express card (Standard)
Corsair VX 550 +12V = 41A / +3.3V = 30A / +5V = 20A
Have tried 1.4, 1.5 and 1.6 bios
Tried Enermax 465 20 pin and Hiper 550W both have more than enough amps.
Plus all the usual basics.......memtest etc etc.........
Problems:
E6750 only seen as 6x333 =2Ghz
Memory only seen in slot 1 and 2....... 3 & 4 disappeared.......
Any ideas.............. I am going mad here.......
It's up and running, so no worries on speed of reply....... ROFL
Look forward to replies.......
ATB
Del

Quote from: Maesus on 16-October-07, 22:35:53
If enabling EIST would cause OC unstable, that means this OC setting is unstable after all. What EIST does is to reduce the multiplier back to 6x during idle, it also set the CPU Core Voltage LOWER.
I don't have this P965 Platinum board to test out, the temperature thing definitely can be fixed, by next BIOS release hopefully. Del UK, did E6600 temp. report correctly?
Hi Maesus,
Yes, temps reported ok with E6600 and speedstep could enabled and disabled. Could see difference from standard to OCing at 3.4Ghz.
Had similar issues with Prescott on the PT880 Version 1 when that came out and was solved with a few bios updates.....
I did go and check the Intel spex for P965 chipset and that states max FSB of 1066. In theory the P965, do not support the 1333 FSB.
I have emailed support and know could be a few days for reply....... not long
Other replies, thanks it all helps and I do try them out.
ATB
Del

Adobe Captivate 5.5 and Neo Speech: issue to use Paul voice

Similar Messages

Maybe you are looking for