Adobe Captivate 7 Bookmarking

Hi, I have built a SCORM course in Captivate 7 that marks the user as complete when they reach the last page. After completing a course, every subsequent time you launch it you are taken back to the assessment summary page, even if that wasn't the last page you visited. Do you know if there is a way to resolve this so that bookmarking behaves as it should after completion?

Can you let me know the details of your Scorm course.Whether it scorm 1.2 or 2004.I was not able to repro the issue in either of them.If possible send me your project cptx file

Similar Messages

  • Adobe Captivate - Resume Data Bookmarking feature

    Hi,
    I am using Adobe Captivate 5.5. The OS is Windows 7.
    I have created a module recording the details of the screen actions to be done. I have used TOC feature. If a user exits the simulation midway and comes back it shows the "Continue from where you stopped last time?" message in a confirmation dialog box. Currently the title of this dialog box is "Adobe Captivate". I would like to know is it possible to change this title? If yes how? Kindly help.
    with thanks and regards,
    Krishna

    Hi,
    Thanks.
    By the way I would like to know in the Aggregator project, is it possible to access the TOC settings. When the aggregator project output is run, the status flag in TOC for all chapters are shown selected. Where as in the self-paced learning the status "tick" mark appears only after each chapter is completed. Is there any way to tinker the settings of TOC in aggregator project. if so how to do it? Please help!
    Krishna

  • ADOBE CAPTIVATE 5 LMS course launch #Scene_1

    I have an adobe captivate course my associate has created in Captivate 5.  This course is just like everyone of his previous courses he has created.  But this course starts on a page title captivatecourse.htm   and after about 30 seconds to 1 minute redirects the URL to captivatecourse.htm#Scene_1.
    notice: this redirection does not happen in the mozilla or firefox browsers.  Only in Internet Explorer.
    OK SO THIS IS THE PROBLEM.
    We us a inline frame to launch our training courses inside of our LMS.  This little redirection " #Scene_1 " in the browser is causing the course to behave terribly and causing the course to stop responding.  Sometimes it just causes the content to jump around.
    When this happens it also causes the sytem to not bookmark and not save scores.  Actually all LMS activity stops responding after it hits #Scene_1.
    I was wondering if anyone has run into this problem with a CAPTIVATE COURSE and what is the work around.  To note: the workaround  of opening the course in a new browser window is not an option right now.  Management wants the course to stay within the same browser window.
    -doug lubey of louisiana

    how is this causing a problem.
    when the captivate course /javascript changes the url / page title from coursexxx.htm to coursexxx.htm#Scene_1; it causes the javascript to load a swf file some how.  it appears to be a bug in the captivate course / swf files /javascript files or the combination their of.
    What the #Scene_1 is doing: it is causing the course to load
    A 2nd time
    A 3rd time
    A 4th tine
    Etc..
    I think the problem is caused by the captivate course causing some javascript to run:
    because the Url changes to  coursexxxx.htm#Scene_1  and the title of the course in the browser
    also changes to course title + scene 1 
    search reference captivate 5  year:2010
    problems running a captive course using inline frames
    captivate training course url is changed once the course is launched
    course posted as a scorm 2004
    i tested this problem in multiple lms systems and it is a consistent problem when playing the content within a inline frame

  • Adobe Captivate has encountered a problem and needs to close.  We are sorry for the inconvenience.

    I am trying to use Adobe Captivate 5 and I am receiving this message when trying to open the application,
    "Adobe® Captivate® has encountered a problem and needs to close. We are sorry for the inconvenience."
    Can you explain how this issue can be resolve!?

    Hi there,
    On which operating system are you using Adobe Captivate?
    Please recreate the preferences of Captivate, following is the location of Captivate Preferences:
    Windows 7: C:\Users\[user name]\AppData (hidden folder)\Local\Adobe\Adobe Captivate 5 folder
               Windows XP:  C:\Documents and Settings\[user name]\Local Settings\Application Data\Adobe\Adobe Captivate 5 folder
               Mac:  /Users/[user name]/Library/Preferences/Adobe Captivate 5 folder
    rename Captivate 5 to Captivate 5_old
    and then try to launch Captivate 5
    Thanks.

  • Retrieving & displaying values from a slide in Adobe Captivate 5.5

    Hi,
    I am using Adobe Captivate 5.5.
    1.In a slide I assign a variable with "active" or "disabled" when user clicks Active button or Disabled button in that slide. This I do with Javascript.
    2.In the next slide I am able to retrieve the resultant (active/disabled). And I want this result to be displayed on a button as a label or display in a Test Caption. Is it possible to do. If so how?
    Please suggest.
    With thank and regards
    Krishna

    I am able to save the text in a java script variable and show the same in an alert (as you observed) but not clear/sure how to assign or save it to a user defined variable in Captivate. Kindly suggest how to first create this user defined variable  and how to displays the contents in Captivate.

  • Is there any other way to get Adobe Captivate help?

    Hi guys,
    is there any other way to get Adobe Captivate specific help? I've posted a question twice with no help, it's very specific, so no one here might actually know the solution. I'm wondering though, since the chat is obviously not for Captivate users with product or service questions.
    Is there a tech team I can somehow contact? We really need an answer to the problem.
    Thanks,
    Nat
    P.S. I'll post the problem again here:
    We publish mp4 training videos as HTML5 content and have the problem that we need to restrict the player to only play/pause.
    Adobe Captivate 7 works fantastic for us on almost all devices, many Androids, many browsers, and even on iPad. Captivate, after adding the video as a multi-slide video to one slide and publishing it as HTML5 content, only lets the student play and pause the video - just what we need.
    But then we test it on iPhone and the iPhone's internal quicktime player recognizes the mp4 video and kicks in, gives the student all the functions they want, totally overrides the HTML5 published Captivate restricted playback options.
    Is there ANY way we can get around that? Any function or box we haven't checked before publishing the HTML5 content?
    We would even be happy, if the video wouldn't play on iPhone - just as long as they can't use it to fast forward to the end of the video.
    Does anyone here know how to bypass the internal iPhone 5 player?
    Thanks,
    Nat

    By the way, I have updated to the newest Captivate 7 version and am using iOS version 7.0.4.
    Again, it's fine on iPad, but not on iPhone 5.

  • What is new in Adobe Captivate 7? | New in Adobe Captivate 7 | Adobe TV

    See the new features in Adobe Captivate 7.
    http://adobe.ly/1aIsLUq

    If you are still having technical difficulties playing Adobe TV videos please contact me offlist with a detailed system configuration information and I'll assist you. [email protected]

  • 'Jump to' a particular slide in adobe captivate using edge animate.

    I would like to 'jump to' a particular slide in adobe captivate using interactions created in an edge animate file. Is anyone able to help me with the javascript needed to do this?

    Hi Leith,
    From what I know, such functionality is currently not available.
    Found something related, but this does not answer your question, I think
    Using Edge Animate with Captivate
    Thanks,
    Preran

  • Adobe Captivate 4 "Blue Screen" on editing "Preferences"

    Hi there,
    I am using a professional license for Adobe Captivate 4, from work. So it's not a personal copy and I cannot just do a clean install without difficulty.
    Anyway, I was using the system fine, and taking an online training about the tool, and half way through my application will now "blue screen of death" when ever I click on "preferences" for even a blank, brand new project.
    I've searched through the forum, this site and googled for it, and the only solutions I can find are to update drivers (which I've done with the help of IT support), update firmware etc which is already up to date, and lastly - to delete the captivate folder, reboot and start again.
    None of these have worked. Has anyone else ever had an issue like this?
    Do I need a clean install? (this would be a pain as I cannot directly install it myself).
    Thanks!

    Try deleting the Captivate preferences file - captivate_v40.dat - found at ..\AppData\Roaming\Adobe\Adobe Captivate. This would probably solve your problem.
    (in Win XP go to Start - Run and then type %APPDATA% to open up the correct directory. In Vista / Win7 type %APPDATA% in Start - Search)
    /Michael
    Visit my Captivate blog with tips & tricks, tutorials and Widgets.

  • I can't install correctly Adobe Captivate 8, cause a message of no connection to internet appears (I am connected to internet). Even though, when I want to unistall through the control panel it doesn't let me, anyone knows how to uninstall it??

    I can't install correctly Adobe Captivate 8, cause a message of no connection to internet appears (I am connected to internet). Even though, when I try to unistall through the control panel it doesn't let me, an Uninstall Failed message appears,  anyone knows how to uninstall it??
    I've already tried Adobe Cleaner Tool, but it doesn't work, as the program is not listed as one of the proposed
    Does anyone know how to uninstall it??
    Thank you

    Which are you after... installing Captivate 8 or uninstalling it (whatever "it" is)?
    Sign in, activation, or connection errors | CS5.5 and later
    https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  • Issue with download of Adobe Captivate 8

    Hi at all!
    I have one issue really strange.
    I have tried to download Adobe Captivate 8 on Adobe's website.
    But when I click on the button "install now" suddetly one window appairs and it ask me
    the path of the computer for to save my file.
    When I choose a path of my computer other window appairs and it tell me
    "It's impossible save a file".
    I don't understand, I have tried to change a path but nothing It doesn't work.
    I hope that somebody help me
    Bye

    Hi Anthony,
    Greetings from Adobe Support.
    Download Steps for Adobe Captivate 8
    Step 1: In order to download Adobe Captivate 8 English, open the link mentioned below and sign in with your Adobe ID and password.
    https://www.adobe.com/cfusion/tdrc/index.cfm?product=captivate
    Step 2: Once you sign In with your Adobe Id and password, you will be redirected to Adobe Captivate 8.0 download page, Do not click on download. Kindly stay on that page and paste the below two links on the Trail Page Address Bar  one by one and save the files on your system at same location:
      For Windows
       32 Bit Installer
         http://trials3.adobe.com/AdobeProducts/CPTV/8/win32/Captivate_8_LS21.7z
         http://trials3.adobe.com/AdobeProducts/CPTV/8/win32/Captivate_8_LS21.exe
       OR
       64 Bit Installer
    http://trials3.adobe.com/AdobeProducts/CPTV/8/win64/Captivate_8_x64_LS21.7z
    http://trials3.adobe.com/AdobeProducts/CPTV/8/win64/Captivate_8_x64_LS21.exe
    Step 3:- When the file finish downloading, then run the .exe file and it will start installing Adobe Captivate 8 on your computer
    Regards,
    Mayank

  • How do I download adobe captivate videos from the internet?

    Hello,
    I'm trying to figure out how to download a video from the internet that was made with adobe captivate 2.
    I've tried using videolan and some other downloaders but they don't seem to be working.
    I may be going about it wrong, does anyone have suggestions?
    I'd like to have them downloaded and saved to my computer so I don't have to access the internet.
    Thank you!

    Thank you for your help, your suggestion worked for the video! But, I found it doesn't work with all the videos on the site.
    For example, the download icon will not light for this video here: http://www.volume11.com/ddsgn150/weblessons/weekone/WeekOne_1b.htm
    Thanks!

  • Adobe Captivate 5 published as pdf not displaying in certain versions of Adobe Acrobat and Reader

    We have an issue where upon publishing files as a pdf in Adobe Captivate 5, they will not open in Adobe Acrobat Pro (9 or 10) or Adobe Reader (11).  However, they will open in Adobe Reader 10.1.4.  I have searched up and down these forums and google, without any solid resolution for this issue.  We are running Windows 7 64-bit machines.  It should be noted, that if we publish as a exe, it works without any issues.  See below for other threads with same issue (but no resolution), and a screenshot.  Thanks!
    Other threads with same issue:
    http://forums.adobe.com/message/4864175
    http://forums.adobe.com/message/5070891

    Try this. Though the solution is for CP6, it might still work for you.
    http://helpx.adobe.com/captivate/kb/captivate-swf-doesnt-play-acrobat.html
    Sreekanth

  • Adobe Captivate will not open open within Presenter (Trial version)...

    Hello,
    I am a subscriber to Adobe Captivate 6 and am in the middle of a 30 day trial of Adobe Presenter.  I use Windows 7 Enterprise and have the the 64 bit version of Adobe Captivate 6.  I also use Power Point 2007.
    I cannot do a software simulation within Adobe Presenter.  When I try, I get the error message that Adobe Captivate cannot be started .... 
    Can anyone help? 
    Ryan

    Regarding this issue error message "(keine Rückmeldung)" / No Response as it's creating the swf file...
    It should display the preview window after sometimes. Please wait for sometimes, if No Response text comes. This issue is normally caused due to system load or performance issue. You may face similar issue while publishing, please wait for sometime, till publish finishes.
    Regarding this issue.Fatal error in Power Point with Adobe Presenter add-in.  If you have seen this error several times, you should deactivate the Add-In and check to see if an update is available.  Would you like to deactivate the add-In?
    Do you face this issue always? This issue normally arises due to faulty presenter installation or Windows 7 SP1 not installed. This error message doesn't hinder with normal Presenter functioning. If you choose to disable it from this error dialog, then you have to enable it again as per the above steps.

  • Adobe Captivate 6 activated but acts as a trial version?

    Although activated, my Adobe Captivate 6 (eLearning Suite 6.1) acts as a trial version in a sense that Project Expiry Date is disabled and all my project expire after one month.
    If I go to Help, the active option is: 'Deactivate....' so there is no way to sort this out by any means available in the application itself.
    There is probably a similar behaviour in other elearning suite applications, but I am using only Captivate so I wouldn't know whether that is the case.
    My PC is on the corporate network, the eLearning Suite 6.1 is installed only on my PC and I don't have the admin rights.
    Is there an option to check the activation status and/or somehow reactivate it again, as it is really annoying to re-publish and upload to company's web portal e-learning files every month.

    Hi there
    You may need to completely uninstall and reinstall.
    Cheers... Rick

Maybe you are looking for