Adobe Captivate 7 crops right hand side of the selection window

Just installed a new copy of adobe captivate on a brand new laptop and have found that it is cropping/cutting off the right hand side of my selection.  If i snap to the application window of choice, it is selcting the correct area.  After i have finished recording and press "end" key, it shows slides with a large chunk of the selction missing from the right. Have updated the software, but still the same issue.

Please see the reply to your other thread where you reported the same issue.
Click here to view
Cheers... Rick

Similar Messages

  • The software is cutting off about 1/4 of the right hand side of the frame. Is there a fix??

    the software is cutting off about 1/4 of the right hand side of the frame. Is there a fix??

    unrecobc
    You said important word "mod". Are you dealing with mod widescreen files? If so, there is a serious problem with them in Premiere Elements 13. I have written about this in detail.
    So, let us rule out or in the above before going further.
    Please see if the details written about in the following apply to your situation....
    ATR Premiere Elements Troubleshooting: PE: 13 Serious Problem With .MOD Widescreen Files
    I have also posted a thread here on the subject. But Adobe Staff has not seen it or has not found time to respond to the matter.
    Premiere Elements 13 Major .MOD Widescreen Concerns
    Please review and consider the above, and let us know if this applies to you.
    Thank you.
    ATR

  • VERTICAL SLIDING BAR ON RIGHT HAND SIDE OF THE SCREEN HAS DISAPPEARED - HOW DO I GET IT BACK PLEASE?

    VERTICAL SLIDING BAR ON RIGHT HAND SIDE OF THE SCREEN HAS DISAPPEARED - HOW DO I GET IT BACK PLEASE?

    This issue can be caused by the Babylon Toolbar extension
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • HT1481 my ipod shuffle is not showing up in my itunes window on the right hand side of the screen

    My Ipod shuffle is not showing up on my Itunes window on the right hand side of the screen?  It is a new one.

    Hi Brittcal,
    Welcome to the Support Communities!
    I would recommend making sure you've run your Windows software updates, and then follow the steps to remove iTunes and reinstall the latest version.   Here are a few articles to help you with this.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Syncing music to iPod shuffle
    http://support.apple.com/kb/HT1719
    I hope this information helps ....
    Have a great day!
    - Judy

  • FF not printing right hand side of the web page using MAC OSX

    FF is not printing out the right hand side of the web page. 1/2 to 1 inch i text is just cut off. Never had a problem in the past with this. Just happened, I believe after I upgraded FF. I am using MacBook Pro OSX.
    == This happened ==
    Every time Firefox opened
    == I believe after I download the new FF update

    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.4; en-US; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8
    I have had problems with Firefox printing pages through most of the Firefox versions. I have tried printing in different ways to no avail.
    Among my attempts:
    printing to pdf, printing selected text, scaling down the page, using the print mode if the art. offers one. None seem to fix the problem.
    Not only does the right margin text get cut off but oftentimes only the first page prints, the rest of the article doesn´t. It just happened again so I went to Safari and the problem disappeared. I believe there´s a serious problem here.
    Below see a shot of what the preview of a 12 page article becomes when printed.
    http://www.npr.org/templates/transcript/transcript.php?storyId=128222247

  • TS3274 Email display problem: My email only display the list of emails and a preview (first two lines of the body of the mail). If one click on the message it only shows the heading on the right hand side of the screen, but not the content.

    My email only display the list of mails in my in box with a preview of the first two lines of the body of the message. When one clicks on the message to open it, only the header is displayed in the right hand side of the screen - the actual message is missing. This happens on older mail previously downloaded that use to work properly as well. Any idea how to fix this?

    Try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • In the previous version of Firefox you would open a new tab by clicking on the small "Open New Tab" button at the Right Hand Side of the Tabs. This button has now disappeared in my upgrade.

    I just installed Firefox 4. In the previous version you would open a new tab by clicking on the small "Open New Tab" button at the Right Hand Side of the Tabs. This button has now disappeared in my upgrade. Firefox help still says you can open a new Tab by using the "Open New Tab" Button so how do I get it back??

    I got it back by going to "customize toolbar" and hitting "restore default set"! Now there is a small tab next to my open tabs with a "+" on it.

  • Need to check tls/ssl but getting stuck with "You must provide a value expression on the right-hand side of the '-' operator."

    I would like to disable ssl 3 but need to test what sites only support ssl 3. I keep getting stuck with an error that is over my head. I've tried manipulating the string a dozen different ways and keep getting the same error. I am not familiar with -notin
    or how to specify which part of the property its checking: thanks a ton
    http://blog.whatsupduck.net/2014/10/checking-ssl-and-tls-versions-with-powershell.html
    line with issues:
    $ProtocolNames = [System.Security.Authentication.SslProtocols] | gm -static -MemberType Property | where-object{$_.Name -notin @("Default","None") | %{$_.Name}
    You must provide a value expression on the right-hand side of the '-' operator.
    At S:\scripts\test23.ps1:50 char:126
    + $ProtocolNames = [System.Security.Authentication.SslProtocols] | gm -static -MemberType Property | where-object{$_.Name - <<<< noti
    n @("Default","None") | %{$_.Name}
    + CategoryInfo : ParserError: (:) [], ParseException
    + FullyQualifiedErrorId : ExpectedValueExpression
    <#
    .DESCRIPTION
    Outputs the SSL protocols that the client is able to successfully use to connect to a server.
    .NOTES
    Copyright 2014 Chris Duck
    http://blog.whatsupduck.net
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
    .PARAMETER ComputerName
    The name of the remote computer to connect to.
    .PARAMETER Port
    The remote port to connect to. The default is 443.
    .EXAMPLE
    Test-SslProtocols -ComputerName "www.google.com"
    ComputerName : www.google.com
    Port : 443
    KeyLength : 2048
    SignatureAlgorithm : rsa-sha1
    Ssl2 : False
    Ssl3 : True
    Tls : True
    Tls11 : True
    Tls12 : True
    #>
    function Test-SslProtocols {
    param(
    [Parameter(Mandatory=$true,ValueFromPipelineByPropertyName=$true,ValueFromPipeline=$true)]
    $ComputerName,
    [Parameter(ValueFromPipelineByPropertyName=$true)]
    [int]$Port = 443
    begin {
    $ProtocolNames = [System.Security.Authentication.SslProtocols] | gm -static -MemberType Property | where-object{$_.Name -notin @("Default","None") | %{$_.Name}
    process {
    $ProtocolStatus = [Ordered]@{}
    $ProtocolStatus.Add("ComputerName", $ComputerName)
    $ProtocolStatus.Add("Port", $Port)
    $ProtocolStatus.Add("KeyLength", $null)
    $ProtocolStatus.Add("SignatureAlgorithm", $null)
    $ProtocolNames | %{
    $ProtocolName = $_
    $Socket = New-Object System.Net.Sockets.Socket([System.Net.Sockets.SocketType]::Stream, [System.Net.Sockets.ProtocolType]::Tcp)
    $Socket.Connect($ComputerName, $Port)
    try {
    $NetStream = New-Object System.Net.Sockets.NetworkStream($Socket, $true)
    $SslStream = New-Object System.Net.Security.SslStream($NetStream, $true)
    $SslStream.AuthenticateAsClient($ComputerName, $null, $ProtocolName, $false )
    $RemoteCertificate = [System.Security.Cryptography.X509Certificates.X509Certificate2]$SslStream.RemoteCertificate
    $ProtocolStatus["KeyLength"] = $RemoteCertificate.PublicKey.Key.KeySize
    $ProtocolStatus["SignatureAlgorithm"] = $RemoteCertificate.PublicKey.Key.SignatureAlgorithm.Split("#")[1]
    $ProtocolStatus.Add($ProtocolName, $true)
    } catch {
    $ProtocolStatus.Add($ProtocolName, $false)
    } finally {
    $SslStream.Close()
    [PSCustomObject]$ProtocolStatus
    Test-SslProtocols -ComputerName "www.google.com"

    V2 version:
    function Test-SslProtocols {
    param(
    [Parameter(
    Mandatory=$true,
    ValueFromPipelineByPropertyName=$true,
    ValueFromPipeline=$true
    )]$ComputerName,
    [Parameter(
    ValueFromPipelineByPropertyName=$true
    )][int]$Port = 443
    begin {
    $protocols=[enum]::GetNames([System.Security.Authentication.SslProtocols])|?{$_ -notmatch 'none|default'}
    process {
    foreach($protocol in $protocols){
    $ProtocolStatus = @{
    ComputerName=$ComputerName
    Port=$Port
    KeyLength=$null
    SignatureAlgorithm=$null
    Protocol=$protocol
    Active=$false
    $Socket = New-Object System.Net.Sockets.Socket('Internetwork','Stream', 'Tcp')
    $Socket.Connect($ComputerName, $Port)
    try {
    $NetStream = New-Object System.Net.Sockets.NetworkStream($Socket, $true)
    $SslStream = New-Object System.Net.Security.SslStream($NetStream, $true)
    $SslStream.AuthenticateAsClient($ComputerName, $null, $protocol, $false )
    $RemoteCertificate = [System.Security.Cryptography.X509Certificates.X509Certificate2]$SslStream.RemoteCertificate
    $protocolstatus.Active=$true
    $ProtocolStatus.KeyLength = $RemoteCertificate.PublicKey.Key.KeySize
    $ProtocolStatus.SignatureAlgorithm = $RemoteCertificate.PublicKey.Key.SignatureAlgorithm.Split("#")[1]
    catch {
    Write-Host 'Failed'
    finally {
    New-Object PsObject -Property $ProtocolStatus
    $SslStream.Close()
    Test-SslProtocols -ComputerName www.google.com
    ¯\_(ツ)_/¯

  • Having two main windows on left hand side and Right hand side of the form

    Hi
    I have a requirement in SMARTFORM  where the required output will be a single form design, approximately A3 in size, split by invoice details on the left side and delivery details on the right side. 
      As the Invoice details and the deilvery details will have multiple line items
    I am planning to create two MAIN window one for the Invoice on the Left hand side and the other for the  delivery on the Right hand side of the form.,
    Will this work or is there any other solution to do the same .
    Regards
    Senthil

    No, it's not possible to have 2 main windows. It will let you activate the form but will run into dump.
    If invoice details on left and delivery details on right are one on one then you can create one table with separate columns for each having all the details in one internal table. If not there could be other work arounds depending on your requirement.

  • I have iMovie application open, but the iMovie application keeps disappearing off the right hand side of the screen and and I can not see it, even though the application is open..help, please!

    I have iMovie application open, but the iMovie application keeps disappearing off the right hand side of the screen and and I can not see it, even though the application is open..help, please!

    Thanks. I don't know why it wouldn't just go back there when I tried putting it back? I didn't change anything, so I assumed the new "default" was over on the left. Glad it was a simple solution after all.

  • Vertical menu on right-hand side of the screen with submenus to the left

    Hello, I am new to muse and am trying to make a vertical custom menu on the right-hand side of the screen. When I try to add submenus, they always appear on the right of the top-level buttons. How do I move these to the left? Thanks in advance, Nick 

    You will have to edit the CSS rules to have a negative offset relative to the parent element. Though, to be honest, it's a terrible idea in terms of usability.
    Mylenium

  • Can i move the trash bin from the right hand side to the left (i am left handed)

    can i move the trash bin from the right hand side to the left

    Sorry, but I never use full screen for anything except an occasional web video. These are my Dock settings and the 66 icons on it take up little real estate.
    This is what mine looks like, SL version.

  • Adobe illustrator crashes right after I Close the tutroial window!!  Help!

    Adobe illustrator crashes right after I close the tutroial window!!  Help!
    I just purchased illustrator after my trial period. It wont run!  And have resinstalled several times. Cleared my font cache.  cleaned my registry. Tried logging as a diffferent user. 
    Im on windows 7
    I need this to work now!!  I have a deadline for a project and this damn program wont work now.  WTF Adobe.  I'm screwed.!!
    Help me please now  asap!

    This can be caused by a permissions problem with AI being unable to write the Preferences file to the proper folder. You can try running the program as an administrator.

  • How do I remove the "View Coupons" ad that appears in the upper right hand corner of the Firefox window.

    I find the "view Coupon" ad that appears in the upper right hand corner of the Firefox window a great annoyance. I would like to remove it from my computer. Can you tell me how to do this?
    Thanks you

    Go to Tools, Add-ons and disable "Panda Security Toolbar 2.0"

  • What is the red button... "IHELP" surrounded by blue, green, red and yellow in the lower right hand corner of the browser window all about?

    What is the purpose of the red button... "IHELP" in the lower right hand corner of the browser window? Does it have any purpose? If so what? When clicked on there is no response.
    == This happened ==
    Every time Firefox opened

    No such button exists by default. It sounds like some extension installed in your Firefox, view/disable them from Tools -> Add-ons, '''Extensions'''

Maybe you are looking for