Adobe Captivate 7 Project How to make Rollover cations, audio, and video work in HTML format?

Honestly, I don't even know why this is an option. The conversion to Flash is completely unusable.
I have exported some things to Flash, and since I program in Flash all the time I was able to manipulate to work to some degree. Most text captions are built with multiple elements and completely fall apart.
Sorry, I can't be of more help.

Similar Messages

How do I synch the audio and video to play together in iMovie? And why is it not synched?

My iMovie the video is not synched to the audio. It could be about two seconds off. And sometimes the sound just stops. I tested it on Quick Time Player and burnt it to a dvd and it does the same thing. The sound then stops halfway through besides my ilife sound effects. How do I synch the audio and video to play together in iMovie and dvd? I taped the movie from my digital camera and it hasn't done this on imovie before. Any Help?

This may help:
iMovie: Improving audio and video synchronization
http://support.apple.com/kb/TA25603?viewlocale=en_US

How to fix problems between audio and video sync?

Hello, I have this old camera DSR 200P and I'm trying to import to my final cut pro x. The importation success well but at the end the syncro between audio and video doesn't work. How can I fix it?
It's possible my mac doesn't accept this kind of camera or should I change any options of final cut?
Thank you

I use to edit footage for a client that was recorded on a DSR-250 (successor of the DSR-200) and every time, every single time, the audio sampling rate would not match my Sequence settings of 48khz, 16bit. The sampling rate of the captured video was always off by a slight amount. It might be 47999.9 one time and 48000.1 the next time ... but it was never at 48000 as it should have been. I chalked it up to Sony using cheap synthesized crystals (frequency generator) to control the rate.
Anyway, the fix was to export the captured clip using QuickTime Pro with the export's audio settings to 48khz, 16 bit.
-DH

How do I combine separate audio and video files into one Quicktime movie?

I have DVDs that contain separate audio and video files in folders marked Audio_TS and Video_TS. I would like to know how to combine these files into a single Quicktime movie. Is there inexpensive or shareware software that imports and unites these files reliably? A simple solution is preferred, rather than getting into complex media editing applications.
G4 eMac Mac OS X (10.4.9)

Doug - the VOB files (in the VIDEO_TS folder) are MPEG-2 files. MPEG-2 have the video and audio mixed into the one file - there are no audio files to combine.
The rest are directions to a DVD player (e.g. the BUP and IFO's) . The AUDIO_TS folder is used for DVD Audio discs and on video DVDs is always empty.
Many people use Handbrake or iSquint to convert VOB to iPod video though MPEG Streamclip is the best - open the first numbered VOB and it will prompt you to open all of them. ALWAYS fix timecodes when it asks. You can then edit/trim and export to MPEG-4.

How to synchronize multiple, unorganized audio- and video clips

I'm editing a video with audio recorded by an external recorder.
I've been given a lot of unorganized files and I wonder if there's a quick way to synchronize them all without knowing which audio- and video file that fit together.

I've been pretty amazed by how well the synchronize clips command works. You might take a chance and select all of your audio/video files at once, right click and choose Synchronize Clips.

How to demultiplex the merged audio and video streams

Hi. I'm currently working on a video conferencing program. I successfully implemented the program using threads to run the audio and the video clients and servers. The problem with this is that the delay for the transmission of both media is a little too great. So now, I'm trying to merge both media into on DataSource, so then I don't have to worry about sending audio and video into 2 different ports and RTP sessions. I know how to merge the audio and video streams, but I was wondering how to extract each media back after receiving the merged audio and video streams. Any ideas? I used the createMergingDataSource(the_DataSource_array) method to merge both streams. Thanks.
J.L.

I am working on the same problem. Is there any solution yet?
Regards
C.Eckert

How to make the Page UP and down work on a table control screen?

Dear all,
Can some one suggest how to make the table control screen work with Page Up and Page down controls.
when I press on Page down it works for the first time and after that i need to select the table to make it work the second time. it there a way I can make the index on the screen stay on the table control at all times.
Regard,
Vj

Take this code as a referance:
Sample code for vertical scrolling in PAI processing will look like this:
MODULE user_command_XXXX INPUT. (XXXX is screen no.)
CASE ok_code.
    WHEN 'P--'.
      CLEAR ok_code.
      PERFORM paging USING 'P--'.
    WHEN 'P-'.
      CLEAR ok_code.
      PERFORM paging USING 'P-'.
    WHEN 'P+'.
      CLEAR ok_code.
      PERFORM paging USING 'P+'.
    WHEN 'P++'.
      CLEAR ok_code.
      PERFORM paging USING 'P++'.
*&      Form PAGING
*       Form to do scrolling for screen XXXX
*      -->CODE   OKCODE value (P--, P-, P+, P++ )
FORM paging USING code.
DATA: i TYPE i,
        j TYPE i.
CASE code.
    WHEN 'P--'. <table control name>-top_line = 1.
    WHEN 'P-'.
      <table control name>-top_line =
              <table control name>-top_line - line_count.
      IF <table control name>-top_line LE 0.
        <table control name>-top_line = 1.
      ENDIF.
    WHEN 'P+'.
      i = <table control name>-top_line + line_count.
      j = <table control name>-lines - line_count + 1.
      IF j LE 0. j = 1. ENDIF.
      IF i LE j.
        <table control name>-top_line = i.
      ELSE.
        <table control name>-top_line = j.
      ENDIF.
    WHEN 'P++'.
      <table control name>-top_line =
             <table control name>-lines - line_count + 1.
      IF <table control name>-top_line LE 0.
        <table control name>-top_line = 1.
      ENDIF.
ENDCASE.
ENDFORM.                               " PAGING
Regards,
Ravi

How to make a background in a report exported in html format

Hi every body,
i made a report using ireport in the design phase and jasperReport 1.3.1 api to generate the report in html format, the problem is that i can't see the background when i run the application :(
so how to display the background in the html report ?
tahnks in advance.

Hi Nav,
You can create a lov using the APEX_ITEM.SELECT_LIST in report query. http://download.oracle.com/docs/cd/E14373_01/apirefs.32/e13369/apex_item.htm#insertedID12
For e.g.
http://apex.oracle.com/pls/otn/f?p=50942:63
Thanks,
Manish

How can I combine the audio and video files from youtube downloads when they don't automatically combine?

I'm using YouTube Video and Audio Downloader. Sometimes the audio and video files combine automatically, sometimes they don't - remaining as separate " DASH - .m4a and DASH - .mp4 ". It used to be that when this would happen I could open up a "ffmpeg" window which would allow me to "manually" convert them to a combined .mp4 file. It was a "drag and drop" type of interface. For some reason I can no longer access that ffmpeg combining function. I tried clicking on ffmpeg.exe. I tried re-downloading ffmpeg several times, both from the Downloader options tab and from the ffmpeg website.
Thanks for your help.

Sounds like a question for the developer of the video download add-ons that you have installed.

Upgraded to mac os x maverick 10.9.1. Any suggestions on how to fix problems with audio and video bugs?

Having problems with video and audio delays for mac ox x maverick 10.9. Are there any ways to fix this?

I also noticed that if I wiggle my mouse around while I watch video streams the video&audio is significantly smoothier.

How to stream audio and video captured from mic and webcam in sync.

I am working on a video chat project. I need to capture audio and video from mic and webcam and create rtp stream for them. How can I proceed for this. Any source code help will be highly appreciated. Otherwise just guide me how to do this and point to any good resource which is directly related to my need.
Thanx.

t.b.m
As mentioned by you, i am doing exactly like that . I have coded transmitter class. But at the receiver side it is unable to play the stream. I am posting my code . Can you please help with me with any mistake i m making in my code ?? Or with way I should receive stream at receiver side. Plz see my code. I am streaming to ip address 172.31.80.67.
package heyram;
import java.util.logging.Level;
import java.util.logging.Logger;
import javax.media.control.*;
import javax.media.protocol.*;
import javax.media.format.*;
import java.io.IOException;
import java.util.Vector;
import java.net.InetAddress;
import java.awt.*;
import java.io.*;
import java.net.InetAddress;
import javax.media.*;
import javax.media.protocol.*;
import javax.media.protocol.DataSource;
import javax.media.format.*;
import javax.media.control.TrackControl;
import javax.media.control.QualityControl;
import javax.media.rtp.*;
import javax.media.rtp.rtcp.*;
import com.sun.media.rtp.*;
import java.lang.Thread.*;
public class HEYRAM{
Format[] format=new Format[2];
Vector[] devices=new Vector[2];
CaptureDeviceInfo[] di=new CaptureDeviceInfo[2];
   SessionManager rtpsm = new com.sun.media.rtp.RTPSessionMgr();
Processor p=null;
Processor p1=null;
boolean result;
public HEYRAM(String address,int port,int ttl){
    try{
            InetAddress destaddr = InetAddress.getByName(address);
            SessionAddress sessaddr = new SessionAddress(destaddr,
                                                         port,
                                                         destaddr,
                                                         port + 1);
            String cname = rtpsm.generateCNAME();
                String username = null;
            try {
            username = System.getProperty("user.name");
        } catch (SecurityException e){
            username = "jmf-user";
        // create our local Session Address
        SessionAddress localaddr = new SessionAddress();
            SourceDescription[] userdesclist= new SourceDescription[]
                new SourceDescription(SourceDescription
                                      .SOURCE_DESC_EMAIL,
                                      "[email protected]",
                                                                 1,
                                      false),
                new SourceDescription(SourceDescription
                                      .SOURCE_DESC_CNAME,
                                      cname,
                                      1,
                                      false),
                new SourceDescription(SourceDescription
                                      .SOURCE_DESC_TOOL,
                                      "JMF RTP Player v2.0",
                                      1,
                                      false)
            rtpsm.initSession(localaddr,
                            userdesclist,
                            0.05,
                            0.25);
            rtpsm.startSession(sessaddr,ttl,null);
        } catch (Exception e) {
            System.err.println(e.getMessage());
            //return null;
    // rtpsm.initSession(localAddress, defaultUserDesc, rtcp_bw_fraction, rtcp_sender_bw_fraction);
        // rtpsm.startSession(...);
public void createVideoSession()
    format[1] = new VideoFormat(VideoFormat.YUV);
    devices[1]= CaptureDeviceManager.getDeviceList( format[1]);
     di[1]= null;
        if (devices[1].size() > 0) {
             di[1] = (CaptureDeviceInfo)devices[1].elementAt(0);
              System.out.println(di[1].toString());
        else {
            // exit if we could not find the relevant capture device.
         System.out.println("1234jjfjsajfjasf1");
            System.exit(-1);
        // Create a processor for this capture device & exit if we
        // cannot create it
        try {
            p1 = Manager.createProcessor(di[1].getLocator());
        } catch (IOException e) {
            System.out.println("1234jjfjsajfjasf2");
            System.exit(-1);
        } catch (NoProcessorException e) {
            System.out.println("1234jjfjsajfjasf3");
            System.exit(-1);
        // at this point, we have succesfully created the processor.
        // Realize it and block until it is configured.
       // p1.configure();
     result = waitForState(p1, Processor.Configured);
     if (result == false)
     System.out.println("Couldn't realize processor");
        p1.setContentDescriptor(new ContentDescriptor( ContentDescriptor.RAW_RTP));
        // block until it has been configured
        TrackControl track[] = p1.getTrackControls();
        boolean encodingOk = false;
        // Go through the tracks and try to program one of them to
        // output ULAW_RTP data.
        for (int i = 0; i < track.length; i++) {
            if (!encodingOk && track[i] instanceof FormatControl) {
                if (((FormatControl)track).
setFormat( new VideoFormat(VideoFormat.YUV)) == null) {
track[i].setEnabled(false);
else {
encodingOk = true;
else {
// we could not set this track to gsm, so disable it
track[i].setEnabled(false);
// Realize it and block until it is realized.
p1.realize();
result = waitForState(p1, Processor.Realized);
     if (result == false)
     System.out.println("Couldn't realize processor");
// block until realized.
// get the output datasource of the processor and exit
// if we fail
DataSource ds = null;
try {
ds = p1.getDataOutput();
} catch (NotRealizedError e){
//System.exit(-1);
System.out.println("1234jjfjsajfjasf4");
// Create a SessionManager and hand over the
// datasource for SendStream creation.
// The session manager then needs to be initialized and started:
// rtpsm.initSession(...);
// rtpsm.startSession(...);
try {
(rtpsm.createSendStream(ds, 0)).start();
} catch (IOException e){
System.out.println("1234jjfjsajfjasf6");
e.printStackTrace();
} catch( UnsupportedFormatException e) {
System.out.println("1234jjfjsajfjasf7");
e.printStackTrace();
public void createAudioSession(){
format[0] = new AudioFormat("linear",8000,8,1);
devices[0]= CaptureDeviceManager.getDeviceList( format[0]);

Satellite A80: How to restore audio and video codecs?

How can I restore the audio and video codecs which are installed by default on my Satellite A80 with XP Home edition?
I removed them in safe mode because of a problem with the Pinnacle Codec installed by Pinnacle Studio 10.
Now I need to set the standard audio en video codecs back.
I already downloaded the codec package from Microsoft Mediaplayer and have sound en video again in Media Player.
Unfortunately I still don't have sound in Toshiba Diagnose Program when testing Midi and Wave sound.
System restore came up with the message that restore was not possible because no changes had been made.
Message was edited by: roel

Have investigated in the forum and found this different codecs:
-Zsunami Filter Pack: (3.9.9)
- Nimo Codec Pack: (5.0 Final)
- ACE Mega CoDeC Pack: (5.93)
- Codec Pack Elisoft: (13.505)
- K-Lite Codec Pack: (2.2) Full
- SLD Codec Pack: (1.5 Pro)
- All in One: (5.0.6.1)
- The Codecs: (1.1 full)
Well, if the system restore does't work try to install one or several codecs from this list.
Have found it in this posting:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=12068&messageID=44047
good luck

Adobe Captivate 8 projects published to HTML 5 shows major loading problems and stops

Adobe Captivate 8 projects published to HTML 5 cause major loading problems in most browsers(IE 11, Chrome v. 35.0, Firefox v. 31). Loading… (screen)
The view stops after a while and only the Loading… (icon) can be seen on the page.
Is this a known problem with Captivate projects published to html5 and is there a way to fix it? What is wrong?
Test the html5 version of this project at: http://kurs.dokker.no/captivate/
and see for yourself what happends.

I changed the Preferences/Project/Start and End Preloader % to 25 and published the projects again. The course: http://kurs.dokker.no/captivate/elev/
stopped like before on one of the first slides, loading… screen like before in IE11.
In Chrome v. 37.0 the course worked badly, would not run, sound missing and buttons not working.
In Firefox 31.0 the course worked to a degree even if the program was advising to use another browser for this content.
In Opera 23.0 sound was missing and else working as bad as IE.
All this testes is done on a PC using Windows 8 connected på internet via ethernet, download speed: 66.57.
I would like to use the HTML5-format since it has a cleaner view than swf-files that appear to be jagged, but there is a lot missing before Adobe Captivates html5 publish is where it needs to be. Her are the complete html5 course and here are the swf based course for comparison.

How to make two mono audio tracks into a stereo pair?

My video clip, brought over into Premiere CS6 from Final Cut Pro 5, has the usual left and right audio tracks, but in Premiere they are not linked into a stereo pair. Thus the volume level has to be adjusted separately in each track.
In Final Cut, I can quickly convert two independent audio tracks into a stero pair by selecting the tracks and then going to the menu Modify > Stereo Pair. I can't figure out how to do this in Premiere.
When two audio tracks are not linked, the volume level has to be adjusted separately in each track, which wastes time. But after two tracks are linked into a Stereo Pair in Final Cut, adjusting either track adjusts them both, together. That's what I want to do now in Premiere.
So, how do I make two separate audio tracks into a linked Stereo Pair in Premiere?
Tom

Hi Tom,
Tom77 wrote:
I need to do in my videos that I either can't do in Premiere or that require involved workarounds like this, things that I can do instantly
I used to think like you do. These aren't workarounds, per se. The issue is that Premiere Pro is a different program, so you have to approach some things slightly differently.
Actually, Premiere Pro's audio capability is more like a DAW than Final Cut was, and more powerful too, so if you know that workflow it makes more sense. A lot of FCP people don't have training in programs like ProTools or Audition, so it's more difficult for folks like yourself (and me, too) to catch on. Once you learn it, though, you begin to see its power.
Tom77 wrote:
things that I can do instantly with the flick of a keyboard command in Final Cut, such as link and unlink audio tracks.
In Premiere Pro CC, you can link and unlink audio and video tracks with a keyboard shortcut for "Linked Selection." You have to create it in your Keyboard Shortcuts dialog box, but it works just like the one in FCP. Make it Shift + L if you like.
Tom77 wrote:
Not to mention the fact that I can have as many projects open in Final Cut as I want, and copy and paste between them. Each open project becomes a tab on the timeline, and I can jump beween projects by just clicking on their tabs. I was shocked when I tried to open two projects in Premiere to find that it only allows one at a time to be open. That seems really primitive--
Again, you can achieve what you want (copying and using items from other projects), you just have to go about it differently. All you do is navigate to the other project files in the Media Browser and import items that you need in this fashion. So, no, you don't have more than one project open at a time, but you got what you wanted, stuff from another projects in your current project. That works for me, anyway.
Again, Premiere Pro is a different program. You can achieve the same goals, but sometimes have to go about it differently. Some things are faster, some slower. Some are easier to learn, some harder. Hopefully, you see my point.
I need video generators to make arrows, circles, squares, etc. and transitions such as edge wipes and clock wipes to animate them, all to point out and emphasize things that I'm demonstrating and explaining in my videos. Premiere has no such generators, nor are there any third-party plug-ins available to add them, that I've been able to find.
Do you know about the Titler? It has a lot of useful shapes. You can also create shapes in After Effects and Photoshop and import them. The shapes you make in those programs can look a lot better than the stock FCP effects.
There are lots of third party effects, some that have generators. Check out Boris Continuum, FX Factory, CoreMelt, Film Impact, and more.
There are pitifully few transitions in Premiere at all (the Mac version) compared to Final Cut.
I'm really not a transitions person, and I find the FCP transitions looking tired anyway. The only one I really need is a white flash and I can either create it, or use a third party flash effect. If you need cool, modern transitions, check out Film Impact or the other third party plug in foundries I mentioned. There is an Edge Wipe transition, called "Wipe." If you need feathering, check out the Wipe Effect, which you can keyframe to look like a transition.
More and more I would like to be moving completely into Premiere, but I keep running into these inadequacies in the program, these roadblocks, for my purposes at least.
The more you work with it, the less you'll be working with FCP. That's what most people are saying anyway. Sure, there are minor annoyances associated with learning a new app, but you also take the good along with it. I suggest you just dive right in. It may take longer at first, but you can get your speed up in time.
I have no doubt that sometime in the future Premiere will become everything that I want it to be, and at that time I can finally abandon Final Cut for good, as I wish I could do right now.
I also came from FCP, taught FCP for nearly a decade, wrote a book about FCP, help start the first FCPUG, worked at Apple on two versions of FC Studio, so I do know what you are going through. Just keep at it and keep posting here. I'll be glad to help you with any workarounds or confusion related to moving over from FCP.
Thanks,
Kevin

I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?

I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?

DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.

Adobe Captivate 7 Project How to make Rollover cations, audio, and video work in HTML format?

Similar Messages

Maybe you are looking for