Adobe CC 2014 AE not exporing to Encoder

Hello.
I have both CC and CC 2014 installed on my system (old versions weren't deleted or written over). Previous version of CC exports to Encoder but CC 2014 After Effects won't export to Encoder. Have tried installing and uninstalling but problem persists. When I try to access AE composition from Encoder I get a message that says After Effects isn't installed and check Dynamic Links.
Can anyone help?
Thanks.

No Adobe personnel here...
The CC installers are horrible and buggy, and sometimes they don't set the permissions correctly on the preference folders. If it never worked, that's likely the problem, if it used to work, it's something else.
See Replace Your Preferences for the paths to the TWO HIDDEN FOLDERS where ID needs to write the prefs and make sure both your User and System have full control under the folder permissions. If it used to work, follow the directions to replace the prefs, and if that is not successful in restoring functionality, try Windows System Restore to a point when it did work.

Similar Messages

Adobe premiere 2014 do not load

why adobe premiere 2014 do not load, I try many times and is always the same think

Hi,
Unfortunately you haven't provided much information. Please provide the following information:
OS, RAM, CPU, Graphics, Exact version of Premiere Pro ( as in the 'About' box )
Are you getting any specific error message?
Thanks,
Rameez

Why isn't Adobe PPRO 2014.2 not handling H.264 files?

It will not render with my MacPro with the Hardware rendering when it use too.
Im having project files and Media encoder exporting crashing all the time.
This is far worse than the Audio Syncing issue we had in one of the last updates.
This makes Premiere Pro None functional with crashing left and right, exporting and rendering crashing.

Double click on the triangle to read the log why it went wrong.

My Bridge in Adobe CC 2014 did not install

My Bridge did not install Photoshop CC

Nobody can tell you anything without proper system info or other technical details. Just saying that it doesn't work is no good way to ask for help.
Mylenium

Adobe 2014.1 Not Showing in Adobe Creative Cloud App

Hi Folks,
I previously opened a similar discussion. Re: 2014.1 App Updates Not Showing Up in Creative Cloud. The solution in the aforementioned discussion does not work in this new context.
1. Reimage laptop with clean Mavericks 10.9 install, with Adobe CC preinstalled using CCP 1.4 and pre serialized.
2. Enter my Adobe ID into Adobe Creative Cloud App. My Adobe ID has a valid CC subscription.
3. Adobe 2014.1 app updates do not show up, except for Muse 2014.
4. The Adobe Creative Cloud App did not think that Photoshop or any of the other Adobe CC Apps were installed, because I was given the option to "Install Photoshop"
5. So, I "installed" Photoshop from the Adobe CC app. Still no updates
6. Uninstall, reinstall. No updates.
7. Checked for the existence of AdobeUpdaterAdminPrefs.dat in
Location: <Startup Disk>/Library/Application Support/Adobe/AAMUpdaterInventory/1.0/AdobeUpdaterAdminPrefs.dat
This file does not exist on my system: it's just not there. So that fix will not work.
8. And yes, I logged in and out of Creative Cloud, and Quit the Adobe CC app and restarted. No luck.
Help.
A.

I am not sure about the CC Packager so the following is more general:
What version of PS do you actually have installed?
PS CC 2014.2.1 is the current version.
Here are links to various updates to see what the current versions are:
http://prodesigntools.com/adobe-cc-2014-updates-links-mac.html

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.
The only thing that I can think of that might be causing the issues that I have a Mac Mini on Mavericks.
Dave

Hi
I have discovered that my question above is a non-question. A user triggered by looking at the below article about Illustrator 2014 cc 17.0.2
http://helpx.adobe.com/illustrator/release-note/illustrator-17-0-2-release-notes.html
He had recently upgraded from wht we now know is 18.0 to 18.1 which is the latest version. He read the above artic
le and supposed that it was a bug fix release for his version - because the v17 ov18 number is not often displayed. It is usually just 2014 CC.
I have asked him to post a bug report about Adobe Illustrator CC 2014.1
Dave

Adobe Muse (2014.3) "Add Web Font" Function Not Working As Expected - Newly Added Fonts Become Unavailable Though Shown

Hello.
This has also been posted in the Community: Adobe Muse Bugs forum.
I've been having some odd/irregular issues though they have now become fairly predictable in nature. The issue is in regards to Adobe Muse (2014.3) and the availability of web fonts provided through the applications "Add Web Fonts" feature. Once added they perform as expected but then become "unavailable." Full details below. I have been a Creative Cloud Complete subscriber for a number of years so am fairly familiar with the way in which the system works minus a few issues that have popped up now and then, this one included.
System Info:
Adobe Creative Cloud (Full Subscription): Version 1.9.1.474
Adobe Muse: Version 2014.3
OS X Yosemite: 10.10.2
Here is a recap of what has been taking place. I'll detail the bug as best I can.
1. Created new Adobe Muse project. Everything normal.
2. Chose to add a new font through the "Add Web Fonts" function within Muse. A note, my Creative Cloud App is running/open at all times (in file synch mode).
3. Chose new fonts using above. All seemed fine (see screenshots below).
4. Fonts also were indicated as being "Synched" within Creative Cloud (screenshot below).
5. As expected the two fonts were added to the list of available Web Fonts within Muse (first screenshot below - left). I added them successfully to my site. Well after a number of hours I went back to this same font selection menu within Muse and the fonts were still visible yet the sub-menu that one would expect showing various forms (i.e. Bold, Italic, etc) was not available. In a sense the font could not be chosen from the list even though the name is clearly visible (second screenshot below - right).
Have no idea what may have been wrong. Saved Muse project, closed and reopened - nothing changed. Created new project - fonts still "shown" in menu but can't be used. Did find a vague description using Google of similar problem (different application) which recommended closing Creative Cloud Desktop App and reopening as one possible solution. This DID WORK initially yet the problem, though corrected for a period of time (few hours at most), would reappear again where one would again see yet not be able to choose from the two Web Fonts. Went so far as to uninstalling the Creative Cloud Desktop application and reinstalling. Still have not solved the problem.
Any thoughts as to what this may be would be welcome. Restarting the CC app each and every time the fonts become unavailable is quite time consuming to my workflow.
Thanks!

Abhishek,
Thank you for the reply. Wanted to comment on a few things.
I reviewed the other post that you've referenced. Nothing unusual jumped out at me as something that I was not aware of. I'm running an older iMac that is in good working condition. 2.4 GHz Intel Core 2 Duo, 24" screen. I know this issue is fleeting, as I stated earlier typically can be corrected with a restart of the CC Desktop application (that I am always running at startup). I have not been able to determine that shutting down Muse corrects the issue. I would, at this time say it doesn't.
I did open InDesign and see if the fonts in question, Open Sans and Open Sans Condensed, were present and usable. They were. The fonts are shown as being synched in my CC Desktop app window (even if they are not "installed" in Muse). That is expected but it may be a bug in how Muse brings in a font from those that are already synched to your CC account. I don't know enough about how that works to comment.
And just to complicate matters, Muse seems to be working again, the fonts that is. I brought them back in and they are showing up in all locations (which there are actually three - see screen shots).
First is primary text menu dropdown (to right of orange "Text").
Second is if you click orange Text link. Another drop down menu appears.
And lastly, the Text Panel to right of screen.
I also wanted to add this extra bit of information, for what it is worth. When the issue arises and you do not get the sub-menu dropdown showing various styles of the font (italics, bold, etc.), one can use click on the missing font if you had used it previously and it is present in the "previously used font" list.
Cheers!

Premiere cc 2014 crash with message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."

I updated to Premiere Pro CC 2014, all the other Adobe CC 2014 software works great, but Premiere doesnt even load. The starting page (frame) comes up - my whole computer slows down and after a minute or two it crashes completely and comes up with the message : "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."
I'm running a macbook Pro 15" (2014) with 16GB RAM and 760GB SSD.
PLEASE HELP!

Hi Delarey,
Please go to the following location and rename the folder to old_folder name
User/user library/Application Support and rename Adobe folder
User/user library/Preferences and rename the Adobe folder
Then go to Documents folder and Go to Adobe/Premiere pro/8.0 and rename 8.0 folder
Make sure that you are in user library if you are not sure check the link below.
Access hidden user library files | Mac OS 10.7 and later
Regards,
Vinay

Adobe Premiere CC 2014 will not load

Adobe Premiere CC 2014 will not load.
Been with tech support for HOURS, reloaded several times.
On Windows 7 with 64 bit computer. NVIDIA 3-D graphics card (plenty of ram, etc)
It has NEVER worked.
Any suggestions?
Mel Wayne

Hi,
Did you try to reinstall Adobe Muse? is it happening with all the muse files like with new sites, or for any particular file?

Adobe Premiere Pro CC not opening an xml file created in Adobe Premiere Pro CC 2014

Hello,
I had created a project using Adobe Premiere CC 2014 which had some minor changes, which were going to be done by my boss, who uses Premiere Pro CC. However the project file of Adobe Premiere CC 2014 was not getting opened in Premiere Pro CC giving a message of type that as this file was created in a newer version of Premiere, it cannot be opened. After searching on this forum I found that we have to convert the Premiere Pro CC 2014 project file to XML file which can be then imported onto Premiere CC. So I created a XML file by selecting File-> Export -> Final Cut Pro XML and sent it to my boss. However even the xml file is not getting opened after being imported onto Premiere Pro CC giving an error of sorts, Cannot open the file since there is a problem with the codecs.
Have I done something wrong? Please guide me since I am a beginner to the Adobe environment and would very much appreciate any help.
Thank you.

Indeed..... but are they fully documented, includuing Adobe's implementation of Multicam?
Collapsing them should really be no more than a day or two of work for an Adobe engineer and a day of beta testing. Seriously. Lots of people want this - it only takes a few minutes with google to find people struggling with this exact problem. Premiere Pro Multicam --> Resolve.
Since we do a lot of multicam work it's something that's important to us.
Lots of other people never go near multicam, so I guess for them it's something they really don't care about.
I currently have > 22 hours of multicam sequences that need primary colour correction and follow on grading..... resolve would be the best choice by far.

I lost Lightroom 5 bought in Dec 2014 and want to download another copy with a serial number. It is not available on the Adobe website and Im not interested in Lightroom CC. Can you direct me to an appropriate website? Thanks Frank

I lost Lightroom 5 bought in Dec 2014 and want to download another copy with a serial number. It is not available on the Adobe website and Im not interested in Lightroom CC. Can you direct me to an appropriate website? Thanks Frank

Lightroom - all versions
Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

Tthe flood filter is in my plugins folder along with the other plugins I have, but not in cc 2014. It's also in Adobe bridge associated with cc 2014, but not in cc 2014 Photoshop. i hope you get this because i forwarded your info to HCS and now I'm all m

the flood filter is in my plugins folder along with the other plugins I have, but not in cc 2014. It's also in Adobe bridge associated with cc 2014, but not in cc 2014 Photoshop. i hope you get this because i forwarded your info to HCS and now I'm all mixed up as to this gets forward.

Unfortunately, you are not addressing Adobe here in the user forums.
However, there are many highly experienced volunteer users here willing to help.
Can you please clarify: are you saying that your Flood filter (whatever that is) is in your Bridge folder but not in Photoshop?
UPDATE: I Googled your Flood Filter and discovered it's not an Adobe filter at all. Have you contacted its manufacturer, Flaming Pear? What do they say?

.indd file does not open in Adobe InDesign 2014?

Why are files created in Adobe InDesign CC not compatible with Adobe InDesign 2014 and vice versa. This is supper annoying - we pay a monthly fee and are completely legit. So why are the 2 not compatible????

You cannot open CC2014 INDD files in CC. That has always been the case and you'd need to go through IDML for that. But CC2014 should open CC files with no problems.
Now, you'd like to share some real details we may be able to help, but saying it doesn't recognize those file is pretty much meaningless. What happens?
And if you uninstalled CC after installing CC2014 I would encourage you to reinstall CC2014. Uninstalling earlier versions has a tendency to break file associations.

Unwanted strobe effect showing on rendered clips - Adobe CC 2014

I'll try and describe the issue as best as possible - I haven't been able to find any similar issues by googling or on forums.
As a bit of information about the project it's adobe CC 2014 with a mix of c100, c300, Gopro and various other footage so a mix of .MTS, .MXS and Mp4 files. All stored and edited from external hardrive via USB 3.
I started out by having red frames appear when I scrubbed through footage on the timeline, and then they appeared in the actual exported file - which from googling seemed to an issue with media encoder not being able to render the source clip properly.
As part of the fix which seemed to work to get rid of the red frames I moved the media cache files from their default location users>library>applicationsupoprt>adobe>common to a render folder which I created on the external hardrive. To be specific I manually deleted media cache and media cache files then created the folder on the external drive and directed adobe to put the files there. That got rid of the red frames but a few days and a different project later I started getting a strobe like effect where every other frame on a few (seemingly random) clips is black, except for the top left corner which shows the image in part. When the footage is unrendered (red on timeline) it plays back fine. When it's rendered the strobe effect happens everytime on playback and with export. All clips it happens to are c300 clips, but there are plenty of c300 clips in the timeline it doesn't happen to. All clips have the same effects on them.
I've made all clips offline, and reconnected media. I've uninstalled and reinstalled adobe CC desktop and all apps about 3 times and used Adobe cleaner to get rid of files then reinstalled. Nothing seems to work. I have noticed that even though the media cache files are redirected to the external drive now, it still creates a media cache folder in the default location and puts some render files there. Perhaps it's something to do with these duplicate render files???
Hope that makes some sense.
Anyone else had this happen?
Any help/advice would be much appreciated. It's for a TVC and needs to be delivered next week.

Thanks Simon, I think you're right.
I seem to have narowed ig down to being a combination of the 'warp stabilisation' effect plus a vignette (made from black video and 'circle' effect).
Whenever these effects are both on, and the clips are rendered I get the strobe effect, but if one or the other is off I don't anymore.
At least I can export the edit with warp stabilisation effect, and then add the vignette to the exported clip - not ideal but a work around.
Hope it get's fixed soon.

Problems with Dreamweaver Add-ons being installed in Adobe CC 2014 - OSX 10.9.5?

I have tried to install two add-ons (Photo Gallery for DW and Adv CSS Menu Light) for Dreamweaver CC 2014, but I receive an error notification, stating that they are incompatible with installed Adobe applications. Both of these add-ons state that they are compatible with Adobe CC 2014, which is what is installed. I am logged in with an administrator account. File Sync is turned on. I have Adobe CC Desktop App 1.9.1.474 which appears to be the latest version. This is on a iMac 27" Mid 2011 running OSX 10.9.5. All available system updates have been applied. I have tried uninstalling and reinstalling the add-ons several times with the same result, on seven different computers of the same build/image. This is in a classroom environment. Any recommendations on additional things to try? Any help is much appreciated!

More info: I tried using the Extension Manager CC to get these extensions installed and they each failed out. One stating that the extension required version 8 or greater of Dreamweaver and the other version 9 or greater. It would seem to me that, for some reason, either Adobe or the system is not reading the version information correctly of Dreamweaver 2014 which is installed on these workstations.

Adobe CC 2014 AE not exporing to Encoder

Similar Messages

Maybe you are looking for