Adobe Central on iSeries OS 7.1

Hello,
Can anyone tell me if Adobe Central operates on an iSeries at operating system version 7.1? We have Adobe Central 5.5 right now, running on a V5R4 machine.
Thanks!

Is this normal? Sometimes, yes. Will it run smooth again? More than likely, yes.
Keep in mind that you've just installed a new brain in to your phone. The way it's been used to doing things has just changed, so you have to expect some adjustment period. Give your phone a couple of days to adjust to the new settings. If, after that time, things haven't shaped up, sometimes just reinstalling the same (new) OS helps.
In the meantime, remove your battery while your phone is powered on then replace it. This will give your phone a little extra help.
I hope that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Similar Messages

Install Adobe central output server 5.5 in windows XP

hi,
Anybody know how can I install Adobe central output server 5.5 in my XP profesional. and where to store all related files( JFserver,JFMerge ....)

did you get anywhere with this ?? I have built a new Windows 2012 R2 server and am having issues emailing out to external addresses. I can email to internal ones on our Exchange 2013 cluster. I have exactly the same settings in the JfEMsend.ini file as well as the same DNS.. I get invalid recipient. Not quite the same problem but could be related
thanks

How to increase the height of the text field in Adobe Central

How do I increase the height of the text field in Adobe Central? I know how to change the font size but visually the height of the text field (<0.5cm) looks too small.
I want to be able to print the form and fill it out by hand. But the text field height is too small.
Please help.
Thanks
Gen

Hi;
Are you saving your form as a PDF from FormsCentral to distribute the PDF form?
In the FormsCentral form authoring tools you do not have control over the size of the field. If you are using a PDF however you can edit that PDF in Acrobat after saving from FormsCentral and can edit the size, border, color etc of the fields.
If you want to edit a FormsCentral PDF you'll want to review this FAQ:
http://forums.adobe.com/docs/DOC-3661
Thanks,
Josh

Adobe Central Pro supported on a Server 2003 R2 Service Pack 2?

Is Adobe Central Pro or can AC be supported on a Server 2003 R2 Service Pack 2.
Currently only have it on SP1.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
When is Adobe Central Pro going to be sunset?

Hi Don,
I've installed SP4 (Incremental) as found here: http://resources.businessobjects.com/support/additional_downloads/service_packs/crystal_reports_en.asp#CRXIR2
But could not find an SP4a or SP6 there. I googled them, leading to another Business Objects page, in which there was a SP4 Full and SP 6 Incremental link, but I can't get a complete download of either.
Can you point me in the right direction? Sorry for the lack of knowledge navigating the Crystal site - it's not a product I'm overly familiar with.
Thanks.

How to create arabic forms using adobe central forms

How to create arabic forms using adobe central forms

Any luck here? I have just a subset of your challenge, i.e., I want to get forms designed in Designer 8.2/Acrobat 9 to work in Reader 7.0.5
Thanks!

Google analytics and Adobe Central Form?

Is there a way to add a google analytics key to an Adobe Central Form?

Hi,
It is not currently supported in FormsCentral. Please refer to http://forums.adobe.com/docs/DOC-4233 on how to submit feature request.
Thanks,
Wenlan

Error causing 'Adobe Central Output Server' service stopped

A error message was logged in the Central Log as follows:
-Unable to remove file 'D:\Jetformdata\Server\Data\JF3A51.dar'. Permission denies.
-Shutting down client agents.
-Warning: skipping disabled task JfShutDn.
-Exit
And then the service 'Adobe Central Output Server' is shutted down.
And when the service is re-started manually, everything is alright.
What event will trigger this kind of error?
Here are the Jetform server configuration:
Window Server 2003 SP1
1 GB RAM
Thanks a lot.

When Cental does it's house cleaning it will delete files in the collector directory based on the "Delete Exension" setting in the Central Process configuration. Yours is probably set to da* and a file with the extension dar is getting in there with permissions set such that Central can't delete it so Central dies. Change the setting to dat and you will probably be allright. It looks like the dar file goes away anyway because on restart everything works fine.

Public APIs for Adobe Central Pro Server

Hi,
Can anyone point me to the Public APIs that are available with the Adobe Central Pro Server e.g. I would want my application to dynamically add or remove steps in the job db, or change the target printer. Also, is it possible to invoke the preview functionality that comes with the Adobe Designer and integrate with an existing application
Here what we are trying to do is add the printing (template merging) facility to an existing application and would want access to the public API for these products.
Thanks in anticipation!
Regards,

I'm not sure you can do what you describe in the manner that you appear to be wanting to do it. I know of no APIs that are provided. There are ways to get the job done, though. The job management data base is an ascii text file that can easily be changed programatically. Parts of our application use it for building a drop-down list of printers for the user to select from. Changing it doesn't automatically cause Central to use the new file. Central must be told to reload it before it will be using the modified file. This can be done by placing a certain "command" file in Central's control folder, but it would not run until after the current job completes - if the current job is the one that just changed the file and further steps of the same job are for the processing of the data, then that would be too late. Once a job starts, all the parameters and tasks from the job management database and on the original ^job statement is what will be used. This goes for changing anything about the job, whether it be adding/deleting steps, changing the printer, or any other parameters. We accomplish pretty much what you want by doing several things. *First, we define all of the various configurations of jobs that we need. For example, our main printing job has four tasks; it is not uncommon to need to restart a job someplace besides the first task. Therefore, we have four different jobs defined, each one starting further down the list of tasks. We do the same thing when the processing of the data has to vary in some manner - we have jobs pre-defined for each specific set of tasks and the source of the data sets the ^job name as required for the specific tasks that have to be done. *For modifying the printer, we use the -z<printer> and -asp<driver> parameters on the ^job statement and the source of the file sets the values as necessary. The source of the file will also set the job name so that the desired job is ran. *We also have built into our custom agents the capability to recognize when a "soft" failure is occurring (such as can't reach our database) and it will put the job back in for processing after changing the job name to run the correct job for restarting at the proper step. *One of our steps is to check a control file to see if there is a redirection for the specified printer to a substitute printer (say, the original printer is down for maintenance). This agent will put the job back in for processing, changing not only the job name but the printer parameters. It has to be put back in, instead of just changing the parameters and passing the file on to JFMERGE, because Central uses the parameters on the original ^job line, it doesn't use the parameters that might be on the ^job line when JFMERGE starts. *We have also created our own agent for running as the JFERROR task. This task runs when one of the agents supplied with Central encounter a failure. Our agent analyzes the failure and determines if it was "hard" or "soft". If it was a "soft" failure, this agent requeues the job, changing the name and parameters as necessary. So far we have been unable to determine how to get our VB6 agents to set the ErrorLevel to notify Central that the agent failed (we came up with a workaround instead of spending a lot of time trying to get the ErrorLevel to work). This is necessary to prevent Central's agents from processing when a predicessor custom agent fails. Since we couldn't set the ErrorLevel, we just set up all of our agents to always create an output file for input to the next task. When one of our agents fail, it only outputs a modified ^job line with no following data. This modified ^job line is recognized by our custom agents as an indication that a failure is in process so it skips any processing except to pass the file to the next task. Since there is no data or form commands in the file, once it gets to JFMERGE, it just terminates without producing any output or error condition. Previewing is accomplished by running the JFPVMRG agent to create a PDF and then JFPVSEND to send it to the originating IP# for receipt by the View Manager which will then load it into Adobe Reader. At this point, the job running on Central will be finished - it could have produced hard-copy output or not depending on its design. Once the user receives the PDF, they can do whatever they want with it (save, print, etc). We use the above capability for our users to view an "archive" image of forms, after it has been processed normally. I know of others that use it to create the PDF as part of the normal processing, allowing the user to then print from Adobe Reader it if they wish. What we do is to drop a DAT file into Central's input folder that runs the above two agents. Our application that is running on the user's PC then watches for Adobe Reader to load and when it does it forces it to be the top-most task (we do this because we have a problem that it will often open behind other windows).

Adobe Central Pro

Does anybody know if Adobe Central Pro 5.6 is compatible with Windows Server 2008, if yes can I have documentation stating that it is.
thanks

Adobe Output Designer
Golden Valley, MN
3-6 Months Project
Must Have Skills: Adobe Output Designer forms design and modification skill.. Other similar product experience could also be considered.
Desired Skills: Coding / form design changes for desktop publishing with web application integration
Job Roles / Responsibilities:
Requirement Analysis for new application integration, impact analysis on existing layout (form) changes, implementing the change to designing of forms and Output designer code to successfully enable implementation.
Thanks and Regards,
Manish Patel | Next Level Business Services, Inc.
Phone: +1 (312) 698-8982 | fax: +1 (608) 646-8326
E-mail: [email protected] | Web: www.nlbservices.com
Add: Yahoo: manish2kp2yahoo.com Live: [email protected]

Blank page - Adobe central 5.7

we are migrating the servers and output central server from 5.5 to 5.7. We've configured all the jobs and tasks similar to the current servers. we are facing the blank page issue in the new server which is using Adobe central server 5.7. We use dat file as well as xml file format as the trasaction file. It merges and prints the template correctly in the new server but it is printing one extra blank page at the end with only one character for ex,D or C or A in that page. We never face any such issues in the current servers. we dint change the dat file format.
Current Server - Adobe central server 5.5
New server - Adobe Central server 5.7
Could you please help me to resolve this issue? How to trace the root cause of this problem ?
Thanks in Advance

I've compared the jfmerge.ini, jfserver.ini and jfserver.jmd in the new server with the current server and most of the properties looks similar. I've tried the below things but we end-up with the same blank page issue with one Character.
1) We've copied the jfserver.ini file from the current server ( central server 5.5) to the new server (central server 5.7 ) and imported the transaction file.
2) Compiled the templates in Output Designer 5.7 and imported the same into forms directory.
3) Used the command line program options to load the template during calling -q and -afx.
We do stop and start adobe server for each change. Could you please tell me what are all the settings thats needs to be considered during the migration of Adobe Output Designer 5.5 to Adobe Output Designer 5.7 ?
Its Urgent.. Thanks!!

File format for Adobe Central Pro Server

Is it possible to use a PDF instead of a MDF in Central Pro? What about XDP files?

Sanket,
Adobe Content Server adds Digital Rights Management (DRM) to PDFs to turn them into eBooks. Your questions seem to deal with a different product.

Adobe central form filler

Last even I purchased the central form filler on a monthly payment basis. I was told by Phillip that I would be able to download and complete Doctor appointment forms. I have been unable to upload and complete the forms. The button for forms will not respond. Before cancelling my subscription I want to ensure that it's not a user's lack of knowledge causing the problem, and not the program. i have not found a source to download anyway workig platform. Help please. Charlie

I'm not sure what you mean by "central form filler." Adobe FormsCentral allows you to create and distribute web forms (http://www.acrobat.com/formscentral). Are you getting us confused with something else? If you are filling out a form created by our service you should contact the form author if you are having issues.
Randy

Manage Jobs in Adobe Central Server

Hi,
I've defined a number of jobs in Central's Job Management Database. Is there an easy way to export these jobs, so that I can easily redeploy them on a different Central Server instance?
I was also wondering whether it's possible to change the name of an existing job?
Regards,
Raf

Redeploying the Job Management Database is simply a matter of copying the
b jfserver.jmd
file from the original folder to the other instances and/or servers. The jfserver.jmd file is where the database is stored. It is located in the ...\ServerX folder. (I'm about to do that myself to distribute a change I just made.) Keep in mind that deploying the JMD file doesn't cause Central to begin using the updated file. Central must be told to specifically reload it via the Control menu, by placing a file in the control folder that has the commands for reloading it, or by stopping & restarting Central.
Depending on how the multiple instances were installed the first instance is named "Server" while the other instanaces (default installation) will have a number starting with 2 as a suffix.
FYI: This is a standard text file that can be read & editted by any program that can edit text files. For example, we use it as input to routines that want to build a drop-down list of available printers.
You can't change the name of jobs/tasks/printers but you can copy & paste. The paste operation asks for a new name.

Como crear un formulario OMR con adobe central

Sabe alguien como puedo crear un formulario OMR? Como puedo añadir las marcas?
Gracias

ya entendí lo que quieres hacer, sí se puede en InDesign, se hace con buttons and forms
https://dl.dropboxusercontent.com/u/5096290/Archive.zip
te paso una muestra para que luego hagas el resto y este tutorial que es excelente, ya viene en .indd y te explica la base de los formularios interactivos hasta con firmas Adobe Signature, se los recomiendo a todos los no iniciados
https://dl.dropboxusercontent.com/u/5096290/create_forms_iD_CS6_tutorial.indd.zip

Looking for Adobe central manuals

Hello, anyone know where I can find tutorials / manual for
Adobe CS and Flash with PDF ebooks.

Thanks Stix.
It's kind of annoying that Adobe doesn't put the manuals on the disk set anymore. Oh well. And then there was that long forgotten time when we used to actually get a print version of the manual.

Adobe Central on iSeries OS 7.1

Similar Messages

Maybe you are looking for