Adobe changes after installing Dragon

Help. I recently installed Dragon 11, i'm running Acrobat 9 on win 7.
Adobe recognized the speech program, asked me questions which i now regret not thinking through, and now opens docs with text recognition - i can highlite, etc. - which i may find nice in the future, but i rarely would care to do things like that - and now the document font is....well i don't now what it is except terrible. I've cruised "preferences" and aimlessly made changes to accessibility, documents, etc. w/out success. I also did the move of accessibility & reader files suggested elsewhere, but didn't revert.
I'd like to return to the crisp, professional-looking files/fonts when i open docs.
Suggestions welcome. thanks

I discovered problem. Apparently smooth text rendering was disabled - i guess that makes sense to help a text program. I went to preferences>page display and re-enabled rendering smooth test.

Similar Messages

Unistall Adobe CC after installing Adobe CC 2014?

Hi, my computer is getting full and I need to take away programs. Is it safe to unintall Adobe CC after installing Adobe CC 2104? I do need to keep Adobe CS6. Will it destroy something in the files, workflow or can I just install them?
Sincerely
Kalmnas

Verak5595173 please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for information on how to resolve the connection error preventing the active Creative Cloud membership from being authorized.

I can not run Adobe reader after installing it. A prompt said can only run an instance.

I can not run Adobe reader after I installed it. I said can only run an instance.

Hi,
Can you share the screenshot of the error message.
Please use the insert image button on the tool bar to insert the screenshot.
If you cannot share the screenshot, please provide the exact error message with us.
Thanks
~ Aditya Kalania

P67A-GD65 : Boot sequence keeps changing after installing SSD

Hi,
Before I had the SSD, all was fine and running on IDE. After installing SSD and changing mode to AHCI, the boot sequence keeps changing after reboot. I did not reset the CMOS after installing the SSD. I had disabled all boot except for the SSD (which is connected to SATA Port 1). And I did save by pressing F10 after changing the sequence in BIOS.
Appreciate your advise.
Thank you.

I have the same problem. The board decides to try and boot from some other device, even though the SSD is detected. Very annoying.
I'm using the sata cable that came with the board; e.g. brand new.
system:
P67A-GD53, bios 1.E, i5-2500K, 4x4 GB Corsair Vengeance, Corsair AX850W, OCZ Vertex LE

Preventing Icons from changing after installing adobe

Whenever I install Adobe all the icons on my computer change to say PDF adobe. How can I prevent this? I have tried restarting my computer but this does not solve it.

Hi,
Please follow the solution provided here: http://helpx.adobe.com/acrobat/kb/application-file-icons-change-acrobat.html
Thanks

PE9 scanning options change after installed new printer

Operating Windows 7 64bit, Epson Perfection 1650 scanner. I have PE9, and after I installed a new Epson printer, my scanning options changed, I no longer have the Twain option, and the scanning window that appears is the one that is for the new printer. I have the option to choose my old Epson 1650 scanner, but it still has the new scanner window, which I don't like, it consistantly scans the entire flatbed even though I only have a small photo on it, and it will not save my settings nor allow me to scan multiple images. Any suggestions for me.

This tech note may help
http://helpx.adobe.com/photoshop-elements/kb/twain-installed-photoshop-elements-9.html

Settings changed after installing...can't fix

After I installed Leopard I have to enter a password everytime I open Mail or Safari? Then everytime I type and send a new e-mail I have to type in a password again. When I look up Keychain Access on my hard drive, there are about 75 different listings. They all have passwords. I can select Always allow on some of them but do not have the option to do that for some.

Trey:
I had a similar issue when I messed up in resetting the group from Unknown to Staff. It totally removed my edit and save capability in my entire home folder for any file that existed before. That correct it for me was running the following in Terminal: sudo chmod -R -N ~
In Tiger, ACLs are a supplement to the traditional Unix file permissions. The Leopard upgrade messed them up so any of the user capable changes locks some things up.
OT

[Solved] Resolution/Text size changed after installing Catalyst

I just installed the proprietary catalyst driver from the unofficial repositories and followed the wiki to successfully install the driver, however upon reboot, the text size(within all the terminals) appears to be twice the size of the regular size.
Here is my xorg.conf file that was generated by doing 'aticonfig --initial'
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
I tried setting my default resolution by adding the line
Modes "1920x1080"
so the xorg.conf file looked like this
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1920x1080"
EndSubSection
EndSection
After a reboot, the size was still the same.
I am not sure what else could have changed the resolution/text size of the terminals.
Last edited by PigsInSpace (2015-03-20 00:17:02)

jasonwryan wrote:
You can work out your correct dpi here: http://dpi.lv/
and then create an entry in your xorg.conf.d as per the wiki...
I read the xorg wiki and I set the display size and rebooted but its the same still.
karol wrote:Try setting the desired resolution with 'video=' or 'vga=' on the kernel command line.
What is the native resolution of your display? What bootloader are you using?
I tried setting the kernel params of video to my native resolution. My native resolution is 1920x1080@144 and I'm using GNU Grub as a boot loader.
jasonwryan wrote:Reading the thread, it isn't clear to me that the issue is in the console: mainly because terminal, TTY and console are used randomly throughout the thread...
Sorry about that, I'm not sure what to refer to it as. Its the default terminal that shows up when you log on without using any graphics or any of that.
cedeel wrote:If you're going to be using the proprietary driver, you won't be able to use KMS as others have said.
That means that your TTY will be a lower resolutioon. So if you need your TTYs at native resolution, the best thing to do would probably be to use the open drivers.
I don't think think the open drivers support for 3d acceleration on the newer graphics card are as good as the proprietary drivers. Also, I do not need to have native resolution on my TTY's but it would be a major convenience to have it display at native resolution.

Safari font changed after installing Word?

I just purchased a new IMAC and please bare with me as I'm new to the apple line of computers. anyway, I installed microsoft word and now my fonts on safari are this weird cartoonish font. I cannot for the life of me figure out how to change it back to the default font. its

What is the URL of your tumblr page that exhibits this behaviour?

How to restart Adobe programs after installing Maverick on Apple ?

I just installed Maverick on my Apple Computers and now I cannot start the Adobe programs.
What can I do ? Thanks in advance, Jos FRANCOIS

Hi GautamBahl,
If I had known this I would not have activated Maverick.
I am not a professional user of the Adobe Programs ; I bought the collection in 2009 when I retired and enjoy to discover new things with it..
Please advice me what to do.
Thanks

Cannot see printer for Adobe X after installing

I've installed Adobe X but no pdf printer shows up
in the printers area, or under any program to select a printer to use
.I'm using WIndows 7. Anyone know how to get this Adobe working?

Reader does not allow you to create pdf files. You need to purchase Acrobat X.

Language change after installed LATEST firmware

I have just downloaded the latest firmware for my E90 and to my dismay I cannot read or write in Chinese anymore.
Can anyone out there help me?
Is there a mechanism to revert back to the original version which can read and write in Chinese.

Greetings,
After a hard reset my nokia N8, I downloaded the new anna 22.014 which was not available in spanish at the moment of my download (aug 18th). Obviously my phone language has change.
My question is: as soon as the 22.014 spanish (latinamerica) version be released, would I be able to reinstall and restore my spanish language, if not, is there any other way INSTEAD a Nokia care center (there is not such service where I live)
thanks in advance

StartAtLogin can user change after install?

Looking to see if there is a way the user can change this
through the application itself, say through a user options setting
box. I see in the documentation it states "the user manually
changes the setting through the operating system" but have yet to
see an example of this anywhere. Basically I would like this value
to be dynamic.

The user can change this through the application if you
provide the UI to do that as part of the application.

How Do I Update Adobe Lightroom After installing Trial Version?

I am currently running Adobe Lightroom 3 on Win7 64-bit. I would like to run the trial version of LR5, but I am concerned with whether I will be able to implement an upgrade and not a full version installation. Additionally, if this is possible will my catalogs come over automatically or do I have to move them manually?

Hi DarylGS
Please refer : https://blogs.adobe.com/richardcurtis/?p=1192
and
http://prodesigntools.com/lightroom-5-ddl-comparison-vs-lr4.html

MOVED: Logo on PC start-up changed after installing Radeon X1650 Pro 512mb AGP

This topic has been moved to Intel P4/Celeron boards.
https://forum-en.msi.com/index.php?topic=126858.0

Do >>Clear CMOS Guide<< with power cord removed.
Make sure that monitor cable is plugged well into VGA

Adobe changes after installing Dragon

Similar Messages

Maybe you are looking for