Adobe Connect gets hanged when enabling/disabling audio
Hi everyone!
My name is Dani and I'm from Spain.
We've just started using Adobe Connect but we are facing an unknown issue. (Art least, it's unknown for me )
I start a meeting as a host, then 2 or 3 people connect to it as guests, and then, everytime I enable or disable my own audio (through the direct icon) the entire platform gets hanged for 2 or 3 seconds. Very annoying!
We are using the adobe connect add-in in a computer with that configuration:
- Dell Optiplex 760
- Windows 7 x64
- 8 GB RAM
- Microsoft LifeCam HD
- ATI radeon graphic card (256MB)
- A DSL dedicated simetric line
Your help would be appreciated!!
Thanks in advance!!
Hi everyone!
My name is Dani and I'm from Spain.
We've just started using Adobe Connect but we are facing an unknown issue. (Art least, it's unknown for me )
I start a meeting as a host, then 2 or 3 people connect to it as guests, and then, everytime I enable or disable my own audio (through the direct icon) the entire platform gets hanged for 2 or 3 seconds. Very annoying!
We are using the adobe connect add-in in a computer with that configuration:
- Dell Optiplex 760
- Windows 7 x64
- 8 GB RAM
- Microsoft LifeCam HD
- ATI radeon graphic card (256MB)
- A DSL dedicated simetric line
Your help would be appreciated!!
Thanks in advance!!
Similar Messages
-
CMS gets hang when configure TACACS
Hi
I have stack of 2950 switches. I have configure tacacs for login security purpose. but i am facing problem when i open CMS web interface. I am succussfully get authenticated. but its get hang when Discovering network information dialog box comes. If you close that session and reopen again then CMS working fine. Problem is that when I configure Network Access restriction group device for specific user. Then it halt at Discovering Network information. I am using Cisco ACS 3.0. Following my switch config.
aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authorization exec default group tacacs+ if-authenticated
aaa authorization commands 1 default group tacacs+ if-authenticated
aaa authorization commands 15 default group tacacs+ if-authenticated.
The only problem is CMS application getting hang with tacacs configuration . My IOS ver is 12.1(14)EA1A. Please help its very urgent.I could not find any bugs related to the issue you are describing. There was one problem where the username/password prompt was appearing again and again which had to do with misconfigurations. Do let me know if you find a solution.
-
Sessions/connections gets hang during update and select operations.
A table with 3 million records, which has customer details data.
Everyday application is executing select and update queries on that table.
Sessions/connections gets hang during update and select operations.
After checking ADDM report, following are the findings:
Please suggest the solutions
Findings and Recommendations
Finding 1: Row Lock Waits
Impact is 145.22 active sessions, 99.77% of total activity.
SQL statements were found waiting for row lock waits.
Recommendation 1: Application Analysis
Estimated benefit is 145.22 active sessions, 99.77% of total activity.
Action
Significant row contention was detected in the TABLE
"AVAYA.AIRTEL_CUSTOMER_MASTER" with object ID 82155. Trace the cause of
row contention in the application logic using the given blocked SQL.
Related Object
Database object with ID 82155.
Rationale
The SQL statement with SQL_ID "974vg65j29pmv" was blocked on row locks.
Related Object
SQL statement with SQL_ID 974vg65j29pmv.
UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
Rationale
The session with ID 50 and serial number 34525 in instance number 1 was
the blocking session responsible for 100% of this recommendation's
benefit.
Symptoms That Led to the Finding:
Wait class "Application" was consuming significant database time.
Impact is 145.22 active sessions, 99.77% of total activity.
Finding 2: Top SQL Statements
Impact is 46.39 active sessions, 31.87% of total activity.
SQL statements consuming significant database time were found. These
statements offer a good opportunity for performance improvement.
Recommendation 1: SQL Tuning
Estimated benefit is 46.39 active sessions, 31.87% of total activity.
Action
Investigate the UPDATE statement with SQL_ID "974vg65j29pmv" for
possible performance improvements. You can supplement the information
given here with an ASH report for this SQL_ID.
Related Object
SQL statement with SQL_ID 974vg65j29pmv.
UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
Rationale
The SQL spent only 0% of its database time on CPU, I/O and Cluster
waits. Therefore, the SQL Tuning Advisor is not applicable in this case.
Look at performance data for the SQL to find potential improvements.
Rationale
Database time for this SQL was divided as follows: 100% for SQL
execution, 0% for parsing, 0% for PL/SQL execution and 0% for Java
execution.
Rationale
SQL statement with SQL_ID "974vg65j29pmv" was executed 212 times and had
an average elapsed time of 2494 seconds.
Rationale
Waiting for event "enq: TX - row lock contention" in wait class
"Application" accounted for 100% of the database time spent in
processing the SQL statement with SQL_ID "974vg65j29pmv".**addm report **
ADDM Report for Task 'TASK_7526'
Analysis Period
AWR snapshot range from 5003 to 5004.
Time period starts at 08-JUL-13 11.00.27 AM
Time period ends at 08-JUL-13 12.00.45 PM
Analysis Target
Database 'AVAYADB' with DB ID 2878789264.
Database version 11.2.0.1.0.
ADDM performed an analysis of instance avayadb, numbered 1 and hosted at
NG-LA04AVAYA01.
Activity During the Analysis Period
Total database time was 563062 seconds.
The average number of active sessions was 155.63.
Summary of Findings
Description Active Sessions Recommendations
Percent of Activity
1 Row Lock Waits 155.44 | 99.88 1
2 Top SQL Statements 26.67 | 17.14 1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Findings and Recommendations
Finding 1: Row Lock Waits
Impact is 155.4 active sessions, 99.88% of total activity.
SQL statements were found waiting for row lock waits.
Recommendation 1: Application Analysis
Estimated benefit is 155.44 active sessions, 99.88% of total activity.
Action
Significant row contention was detected in the TABLE
"AVAYA.AIRTEL_CUSTOMER_MASTER" with object ID 82155. Trace the cause of
row contention in the application logic using the given blocked SQL.
Related Object
Database object with ID 82155.
Rationale
The SQL statement with SQL_ID "974vg65j29pmv" was blocked on row locks.
Related Object
SQL statement with SQL_ID 974vg65j29pmv.
UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
Rationale
The session with ID 167 and serial number 6084 in instance number 1 was
the blocking session responsible for 100% of this recommendation's
benefit.
Symptoms That Led to the Finding:
Wait class "Application" was consuming significant database time.
Impact is 155.45 active sessions, 99.88% of total activity.
Finding 2: Top SQL Statements
Impact is 26.66 active sessions, 17.14% of total activity.
SQL statements consuming significant database time were found. These
statements offer a good opportunity for performance improvement.
Recommendation 1: SQL Tuning
Estimated benefit is 26.67 active sessions, 17.14% of total activity.
Action
Investigate the UPDATE statement with SQL_ID "974vg65j29pmv" for
possible performance improvements. You can supplement the information
given here with an ASH report for this SQL_ID.
Related Object
SQL statement with SQL_ID 974vg65j29pmv.
UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
Rationale
The SQL spent only 0% of its database time on CPU, I/O and Cluster
waits. Therefore, the SQL Tuning Advisor is not applicable in this case.
Look at performance data for the SQL to find potential improvements.
Rationale
Database time for this SQL was divided as follows: 100% for SQL
execution, 0% for parsing, 0% for PL/SQL execution and 0% for Java
execution.
Rationale
SQL statement with SQL_ID "974vg65j29pmv" was executed 707 times and had
an average elapsed time of 794 seconds.
Rationale
Waiting for event "enq: TX - row lock contention" in wait class
"Application" accounted for 100% of the database time spent in
processing the SQL statement with SQL_ID "974vg65j29pmv".
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Additional Information
Miscellaneous Information
Wait class "Commit" was not consuming significant database time.
Wait class "Concurrency" was not consuming significant database time.
Wait class "Configuration" was not consuming significant database time.
Wait class "Network" was not consuming significant database time.
Wait class "User I/O" was not consuming significant database time.
Session connect and disconnect calls were not consuming significant database
time.
Hard parsing of SQL statements was not consuming significant database time. -
Adobe installer just hangs when I try to update Creative Cloud, how can I fix?
Adobe installer just hangs when I try to update Creative Cloud, how can I fix?
Hi Totti Pointer,
Please follow the below mentioned steps:
1. Navigate to Application/Utilities/Adobe Installers and uninstall CC desktop.
2. In Application/Utilities/ trash Adobe Creative Cloud and Adobe Application Manager folder.
3. Go to Library/Application Support/Adobe and rename OOBE to OOBE.old.
4. Go to ~/Library/Appplication Support/Adobe and trash OOBE.
Try to install CCD again and let us know if still the same issue.
Regards,
Romit Sinha -
I-tunes gets hanged when connecting i-pad to 64 Bits Windows 7
Hi,
I have both new I-Pad and I-Phone, but none of these appears in my i-tunes. In fact i-tunes get hanged and i can't perform any action. This issue i only face with 64 Bits Windows 7.
I request help in this regard.1. plug in IPAD
2. go to start
3. search bar type in: devmgmt.msc
4. open: portable devices
5. right click: apple Ipad, hit unistall
6. then hit reinstall
you should see in bottom tool bar your device being reinstalled.
open itunes.
If that doesn't work. Make sure you go in iTunes > Edit > Preferences > Devices and make sure to check: Prevent iPads, iPods, and iPhones from syncing automatically.
Then try to connect again -
Planning getting hanged when i change a member hierarchy
Hi,
When i try to change the hierarchy of a member by cutting and pasting it or through outlineload.cmd, planning is getting hanged. I get java heap space error. We have set the intial and max heap size in the registry as
1. Initial heap size = -Xms1024m
2. Max heap size = -Xmx1024m
Even the planning service is not responding. And planning web is not even opening now.
There is another entry in the registry named JVMOption10 = -Xss256k.
What has to be done?
Regards,
Ragav.
Edited by: ragavhere on Mar 25, 2011 6:52 PM
Edited by: ragavhere on Mar 25, 2011 7:01 PMHi John,
There was workflow enabled for a particular scenario. I've cleared it. Now i am able to delete. Thanks a lot.
But otherwise when workflow is enabled and if i have to change the hierarchy, how is this scenario managed? Is this the only way?
Regards,
Ragav. -
When i click on any link to download a file ( software, document etc.) using idm , the firefox get hang for sometime till the download dialogue box don't come. any solution to this problem.??
Try to start Firefox in [[Safe mode|Safe mode]]. This mode disables all extensions, user customizations, hardware acceleration, etc. temporarily for diagnostic and troubleshooting. If Firefox works find in Safe Mode, then this is likely an add-on issue. Restart Firefox in normal mode, then type "About:addons" (without the quotes) in the address bar. Disable your extensions one by one, restarting Firefox between each one, until you find the trouble maker. Once you do, you can disable that add-on and report the issue to that add-on's developer.
A few other basic trouble shooting things you can try is this:
Run all Windows Updates, install all needed service packs, etc.
Update your graphics driver (Firefox uses your graphics card for some rendering, and an out of date graphics card driver can cause problems. [https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers].
Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].
Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. You can uninstall this program after you clean off any infections. -
MY MAC BOOK GET HANG WHEN I SHUT DOWN IT WHAT IS THE REASON?????
MY MAC BOOK (PRO) GET HAND WHEN I SHUT DOWN IT.
WHAT COULD BE THE REASON ????The OS is Mac OS X 10.6.8 (10K549) if I am right at this time (I am not good with the the IT stuff).
BTW: I have copied the software information below for best answer;
System Software Overview:
System Version: Mac OS X 10.6.8 (10K549)
Kernel Version: Darwin 10.8.0
Boot Volume: Macintosh HD
Boot Mode: Normal
Computer Name: Abu Baker Stanekzai’s MacBook Pro
User Name: Abu Baker Stanekzai (abubakerstanekzai)
Secure Virtual Memory: Enabled
64-bit Kernel and Extensions: Yes
Time since boot: 12 minutes
Tx in advance -
Integration Directory is getting hanged when trying to do some changes
Hello All,
Ours is PRD XI 3.0 env...and when we try to do any changes(editing , activating , rejecting the changes) it gets hangs up with out throwing any error.
At the same time other java tools(IR,RWB,SLD) are properly accessible .
Some points to be taken into notice:
1>Even we tried to do a CACHE refresh SXI_CACHE , which is success with out any problems.
2>After entering into ID , when trying to do "clear SLD cache " also it gets hangup.
Can any one help us to fix this issue.
Best Regards
Rakeshtry the following;
1. close IR/ID.
2. open java web start
3. Preferences -> advanced -> clear folder
then try to open IR and ID.
this should do the trick
else;
XI start page -> Administration -> Java Web Start Administration -> Re-initialization -
Report6i is getting hanged when i am using truncate command in srw.do_sql
Hi All,
I am using Reports 6.0.8.18.0 and oracle 9.2.0.1 on Windows XP with SP1.
I am having a report in which i have used "truncate table <tablename>" command using SRW.do_sql command. some times report is getting hanged and some times it is giving an error as given below
18:26:52 ERR REP-1425: 'afterpform': Error running DO_SQL package - 'Error parsing the SQL statement.
ORA-04021: timeout occurred while waiting to lock object <object name >
When i checked with the Oracle 8.1.7 database it is working fine.
is there any patches are requried at database side ?
Can any body help me in this.
Regards,
GouriFirst: you should get a new keyboard. Seems your shift-key is stuck.
Second: A header of a post is a header and not for a summary of your question
Third: This is the forum for the tool SQL Developer. Please mark this question as answered and post again in Forms
Forth: When you expect an answer, the least would be to include the errormessage and your forms version.
Regards
Marcus -
Session gets hanged when breakpoint is set, else works properly.
Hello Experts,
I am expierencing that when i activate the breakpoints in my source code, my sessions gets hanged up.But when i remove the same breakpoint , i get to see the output. I have all the rights , and i use to debug till this last week.
Can anyone help me in this issue.
Thanks in advance.
SwapnilHi, Waghmare
Please Check your GUI version and Patch Level i think problem is with your GUI
Follow Steps Bellow
--> Press ALT + F12
--> From the menu Select About from here you can Check the Version and Patch Level
Regards,
Faisal
Edited by: Faisal Altaf on Feb 1, 2010 3:12 PM -
Bex query is getting hanged, when trying to drill down only for one hierarchy node.
Hi All,
We have a bex query, in which we have multiple nodes. And we are able to expand almost all nodes except one hierarchy node called "BD1".
when we trying expand the BD1 node, the report is executing on and on and getting hanged up.
In RSRT the read mode is "H"
The report is based on a multiprovider and it has 7 cubes of which 6 of them have aggregates.
The characteristic for which we have issue is also having BWA.
So, I am not sure why the issue is with only 1 node in the entire report. Can someone let me know the possible reasons and solutions.Hi Shilpa,
The only way to show long text is to maintain only long text for the info object. Otherwise system always defaults to short text.
Jaya. -
Adobe Connect screen hangs; file won't open
Have created a dynamic .pdf form in Acrobat 9 (using
LiveCycle ES) to send to 200 respondents. Are in testing now; find
that we have trouble opening forms from the email invitation, even
after installing both the Flash player 10 and the free Adobe 9
reader.
Simply get the Adobe Connect screen; nothing else happens.
Have tried pre-opening the reader, doesn't help.
Suggestions? This will be a disaster if we cannot distribute,
and right now I have no backup plan.
We have had good success distributing non-dynamic .pdfs this
way.I have responded to your Correction posting.
Cheers,
Pete -
Dreamweaver cannot make a connection to server when enabling Contribute compatiblity
Dreamweaver, inexplicably, cannot enable the Contribute compatibility. I can connect to the site in DW just fine, just cannot connect when enabling contribute compatibility.
I have the same issue here since today!! Both in Dreamweaver CC and CC 2014.ugh, also
Strange enough, also Filezilla gave problems, until I switched to TLS there.ave Norton Internet Security
Could it be that you also have Norton Internet Security, and that Norton did an update today...? I wonder.
Drives me crazy....
"An FTP error occurred - cannot make a connection to host. Internal data error. Failed to send network Data." -
Script to enable/disable audio/videotracks
Hi,
Trying this:
function SwitchOffVideoOutput (vtracks,activeSeq)
var active_seq = activeSeq;
var videotracks = active_seq.videoTracks;
alert("numTracks: "+ videotracks.numTracks);
track = vtracks.split("|");
for (i=0; i <= track.length; i++) {
alert("Switching off: "+ track[i]);
// Would like to do something like this:
// videotracks[track].enabled=false;
// videotracks[track].output=false;
// Renaming sequence from A to B
tmp = active_seq.name;
tmp = tmp.replace("_A","_B");
alert(tmp);
//active_seq.name = tmp;
SwitchOffVideoOutput ("2|3|4",app.project.activeSequence);
// But also would like to do this:
var myColl = app.project.selection;
for (i=0; i <= myColl.length; i++) {//loop through the project
alert(myColl.name)
SwitchOffVideoOutput ("2|3|4",myColl.name);
// SwitchOffVideoOutput and rename selection in Premiere ProAlthough you can set or remove the Dark interface style with defaults write syntax, the reset back to default (non-dark) interface will require a log-out/log-in cycle to entirely remove the Dark style. Toggling this style on and off in the System Preferences > General panel does not require the preceding log-out disruption. Unfortunately, other than possible GUI scripting, the Apple Script dictionary in Yosemite is very limited with respect to System Preferences access, and enabling/disabling the dark interface style.
Maybe you are looking for
-
2006 MacBook Pro died, best methods to transfer data to new MacBook Pro
So my Rev. A MacBook Pro 2.16Ghz intel core duo finally died, looks like something on the logic board. So I bought a brand new 2011 2.2Ghz MacBook Pro. I have purchase and On The Go 2.5 inch enclosure from OWC, it's a USB device. the old hard drive i
-
Adding font to use in Acrobat X Pro forms
In Acrobat X Pro (on Mac OS) I have created a form text box. I have the font I want to use in the text box on my system, but it is not listed in the drop down list in the appearance tab of the box properties. How can I get to use this font? Thanks!
-
I am querying an Oracle Rbd. I want to retrieve a list of Tables that exist in the database. I have used the following SQL statements without positive results: SELECT * FROM ALL_TABLES SELECT * FROM DBA_TABLES SELECT * FROM USER_TABLES Can someone he
-
System slow, a few not responding items
I've owned an HP h8-1080t CTO for 3 years now. It has been a screamer. from power on to hd idle was under 45 seconds. Sometime last year I started using Photoshop CS6 extended to play around with 3d. A few times PS would crash when playing with 3d. A
-
While trying to establish a SSL Link to a URL Connection, I got an IO Exception "Server Certificate subjectDN CommonName received does not match Server hostname" on the destConn.getOutputStream(). What does this mean? And how do I fix it? System.setP