Adobe Connect issues with Windows 7

Has anyone found a solution to the problems Adobe Connect has with Windows 7?

Sounds like something is blocking network traffic. I'm not aware of any Windows 7 specific issues. I've used Windows 7 with connect for 2 years with no Windows specific issues.
I'd call support at 800-945-9120 and see if they can indentify the issue and give you a resolution.

Similar Messages

I have Snow Leopard 10.6.8 on my MacBook. Constantly dropping internet connection or message "error connecting to the network" comes up. No wireless connectivity issues with windows 7 laptop or iphone.

I have a MacBook with Snow Leopard 10.6.8. The last few weeks it has been constantly dropping internet connection, and one of these messages appear on the page: "Safari cannot open this page because the server where this page is located isn't responding" or "Safari cannot open this page because you are not connected to the internet" comes up. I will check Wifi and I am connected. No wifi connectivity issues with iphone or windows 7 laptop, this doesn't happen with either of those devices. I have unplugged and reset router, cleared cache, still happening. Any ideas? Thanks in advance.

Hi BCLor!
Try using the suggested steps in the following article to help you troubleshoot this issue with your Wi-Fi connection:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

SSLVPN connectivity issue with Windows 7 x64 All browsers.

I think that I have tried everything to get this working but whatever I seem to do I cannot connect to my SSLVPN using Windows 7 x64. The 32bit version is fine. I have installed the Microsoft C++ Redistributable 2010 and 2005 for both x86 and x64. I have tried clearing the cache in the Browser. I have installed Chrome and Firefox , I even started my laptop using the 'Disable Driver Signature Enforcement' from Advanced Boot options but nothing is working.
Does anyone have anything else to try. This is a bit of a showstopper for us because not do we have this issue with Windows but we have Mac users as well and that is also an issue.
Cisco really needs to fix this issue fast...
Please help.
Thanks
Mark Sheehan

Try using both the 32-bit and 64-bit versions of Internet Explorer. Sometimes one of the two will work.

Lumia 820 connection issue with Windows 7

Hi there, I'm hoping someone can help me. Up until about 2 weeks ago I could connect my Lumia 820 directly to my PC (running Windows 7) without the windows phone app. Windows would detect the phone as an external drive and it would appear in Windows explorer. Since after the new year (I uploaded music to the phone for NYE successfully), there is a connection issue. Windows sees the phone in 'Devices and Printers' but not in Windows Explorer. I downloaded the windows phone app and this doesn't connect. Windows 7 is fully updated, including the new service pack.
I have attached a screen grab to illustrate my issue. Any help would be greatly appreciated.
Attachments:
lumia-connect-issue.jpg ‏204 KB

Sorted. It was a case of turning the phone off and on again. *sigh*, bloody billyware **bleep**!

HP Photosmart D110 connectivity issue with Windows 8.1

Month back, i have upgraded my Dell inspiron to windows 8.1 and from that time onwards i am facing issues with connectiveity to HP photosmart D110 printer over my wireless network.
I installed the printer driver, once it is installed fine. i can see the printer, take out few prints. Then i shutdown my laptop. Next time i reboot. I launched HP Solution Center and turned on my printer. It showed up problem with with HP solution center saying " HP Solution Center can not run becuase your device installation is not complete" i have to the printer and devices setting on control panel i could see the printer but it is offline. I checked my connections with the printer. also ran the wireless network test. Everything comes fine.
To resolve the problem, i thought may be let me re-install. I finished reinstalling and then it worked fine. But every restart i faced the problem. I add the add the same printer again and again everytime using installation and reinstallation. This sucked. I googled and downloaded HP doctor software. That fixed the problem so far and i had to run the doctor connect the printer everytime.
Now even HP doctor is not working, it list all the multiple installation of the same printer and none of them gets connected. This is getting little crazy for me.
I need some advice, I appreicate your help in looking into it. If someone has some suggestion to deal with Windows 8.1 and have faced similar problem or can suggest some solution. I will be greatful.
Thanks,
AKS309

Hi,
When using "beta" version of any software (even with NEW full software), users have to accept the risk of some hardware do not proper functioning. Many HP test guys/girls may face this similar problem in their test lab(s), they may be able to find a solution OR push it back to Microsoft to fix the problem, therefore users (you and me) have to wait.
I woul remove/unistall its driver then start from beginning.
Hope this makes sense.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Airport Extreme 802.11n connectivity issues with Windows Vista

I recently purchased the 802.11n airport exterme base station and set it up using my MacBook Pro laptop. During the configuration process I set the security to be WEP enabled since there are other computers on my network, one of which has only an 802.11b wifi card, that can only accept WEP security protocol. The set up worked great and I was surfing on the internet with my Mac in no time.
When I go to connect to the 802.11n extreme base station with my Windows Vista desktop PC, I cannot get any type of connection. I re-entered the Network SSID to match that on the AE base station and re-entered the WEP enabled password.
Is there a compatibility issue between the Airport Extreme Base Station and Windows Vista? I realize that the base station works on XP based PCs but not sure why it could not work on a Vista machine. Any help anyone can offer would be greatly appreciated.
MacBook Pro Mac OS X (10.4.6) 1.83Ghz Intel Core Duo

Upon further review I determined the flaw with my earlier attempts to set up the airport exterme base station with my winodws vista desktop pc. I realized that I should not use a WEP key but rather a WPA key since the wireless adpater connected to my desktop is a wireless G enabled adapter that can handles WPA and WPA2 security.
Therefore, no issues with Vista and the airport extreme base station. Works great.
MacBook Pro Mac OS X (10.4.6) 1.83Ghz Intel Core Duo

E1200 router connectivity issue with windows 7 computer from sleep state over night

recently purchased the e1200 and setup was a breeze but I'm having difficulty with the primary computer (windows 7) connected to it, by wire, haven't used any wireless yet. When the computer is put to sleep through the night, I have to restart the computer the next morning to get a signal but works fine if put to sleep during the day and awakened the same day to use the connection. Have a second computer wired directly to the modem with vista that doesn't have this issue. any thoughts out there. thanks

Try this. Go to Control Panel>Click on Network and Sharing Center or Network and Internet and then Network and Sharing Center>Click on Change Adapter settings>Right Click on Local Area Connection (the adapter being used for the wired connection)>Click on Properties>Click in Configure>Go to the Power Management tab>Uncheck "Allow the computer to turn off the device to save power"

Wifi connectivity issues with windows 10

I am unable to connect to my Wifi network following upgrade to windows 10

I would look into updating the firmware of the wifi router solves problems for many people

Compatibilityy issue with windows XP and windows 8.1 for adobe photoshop elements 4.0

Compatibility issue with windows XP and windows 8.1 for adobe photoshop elements 4.0?comcom

You are going to have to contact Adobe on this one. We are other users.
Sounds like it's not even an Apple question? Not sure.
But the Adobe program changed, nothing changed in iTunes, right?

SAP GUI Compatibility issue with Windows 2008R2 64 Bit

Hi Gurus
Is anyone experienced connectivity issue with SAP GUI (32bit) on Windows 2008R2 64bit? Except base version of 7.3 every Service Pack failing
to connect, Strange thing was it was working with SP5 in WINDOWS 7 64bit.
Your inputs greatly appreciated.
-giri

Hi Giri
Yes, You can do the normal installation on windows 2008 / 2008 R2 systems. we are using in our environment. is this any error message while installation or SAPGUI execution time?
Refer the SAP Note 66971 - Supported SAP GUI platforms
BR
SS

Connection issues with Safari 3

I'm having some connection issues with Safari 3.
When I connect wirelessly, Safari won't load any web pages. I go and use Firefox and everything is just peachy.
I've reset Safari, emptied the cache and whatnot. I went in and checked the permissions, everything checks out.
When I connect with Ethernet, there's nothing wrong, which is my dilemma.
Help would be greatly appreciated.

There are a number of posts in the Leopard forum from people with direct experience with upgrading from Panther to Leopard. Here is a relevant thread from there that should reassure you.:
http://discussions.apple.com/thread.jspa?threadID=1418714
Your system should be fine for Leopard, but you will probably need a current version of Photoshop if you don't already have it. See this download:
http://www.adobe.com/support/products/pdfs/leopardsupport.pdf
Also, Leopard doesn't run Classic (OS 9) apps.
One caveat - first make a bootable backup "clone" of your present system onto an external firewire drive so you can recover if anything goes wrong. You can use the "Restore" tab of Disk Utility to make such a clone, and there are also Panther-compatible versions of Carbon Copy Cloner (v 2.3) and SuperDuper (v 2.1.4), both excellent for this.
It's even possible to a create second Panther clone on a different external volume to create a "dual-boot" system, using that volume to continue to run old applications that you can't run with Leopard.

SQL Developer connection issue with JDBC

Hi skutz & friends,
I have problem with Oracle SQL Developer I can not connect to any oracle db
because Status : Failure -Error loading native JDBC driver library.
However, I download SQL developer [ Oracle SQL Developer for Windows (JDK1.5.0_06 is bundled in this zip) ]
After it is not working. Also I download JDK 5.0 Update 14
The Java SE Development Kit (JDK) to install it on my PC again.
But it does not work. My install path information:
install path as C:\Program Files\SQLDEVELOPER_INSTAL\sqldeveloper
local oracle as !0g 10201
SQL version as sqldeveloper-1.2.1.3213 which download last versionfrom OTN on 2/18/2008.
for connection, taken basic.
port as default 1521
hostname and saver name are same.
I created a environment variable in window xp.
SQLDEVELOPER_USER_DIR AS C:\Program Files\SQLDEVELOPER_INSTAL\sqldeveloper
can anybody help me with this connection?
thanks
Jimmy

Duplicate thread: Please enter all responses on other thread: SQL seveloper connection issue with JDBC

Is there a known issue with windows 8 supporting itunes?

each time I update itunes I lose my itunes store connection and therefore can't update apps etc. Is this a known issue with windows 8 users?

Yes. Some are complaining.
Search iTunes.exe. RIght Click, Properties, Compatibility, Click Run this program as Adminitrator. OK.
See if this helps

Adobe 5 compatiable with windows 8

is adobe 5 compatiable with windows 8?

If you want to install Adobe CS5 then yes you can try to install Adobe CS5 on Windows 8 and let know in case you face any issue.
If you are trying to install any other software of Adobe then please let us know the name of the Adobe Software which you want to install.
regards,
Jatin Dembla

Connection issues with EA4500

I had bad connection issues with my mobile device, so i pressed reset on my EA4500 router, and now when i connect to my network, it gives my limited connection even though i have 5 bars of signal. Not sure what to do now...

Resetting the router will erase all the settings you configured on the router since the initial setup. You manually configure the router's wireless settings so your wireless devices can have internet access again.
Procedure: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=cfb50c0dc992443ab2405a782cca60f7_19073.xml&pid=80&...
Make sure to use a computer that is hardwired via Ethernet cable to the router.
For bad connection issues: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=cf6ed888ce144d06905af4987887fd1b_KBxxxx_EN_v1.xml&...

Adobe Connect issues with Windows 7

Similar Messages

Maybe you are looking for