Adobe Connect Monitoring System

We are starting our project to switch from a hosted to self hosted Adobe Connect system. What I am wondering is what kind of monitoring system do some of you use to monitor the system to make sure that the app and iis is running correctly. It would be nice if there is a system at a reasonable price that will send me an SMS message if the app stops running or a problem occurs. What monitoring systems do all of you use to make sure that Connect is always running?

Hornrimmed wrote:
Any ideas?
Not without you providing some information.

Similar Messages

Crach Adobe Connect when sharing screen - Windows

Dear all,
When I try to share my screen via Adobe Connect the system crashes.
We tried various browsers, resolutions and we installed the latest verion of Adobe Flash Player. Does anyone have any further advice on what we can do?
Thanks in advance.

Not having the Screen Share icon sounds like they were a the Participant level of permissions in the room, and needed to be promoted up to Presenter or Host to be able to share their screen.
Here is a screen shot, with the Participant on the left and a Host/Presenter on the right:

Can we connect a Cisco videoconference system to adobe connect?

One of our participants wnt to use his own CISCO C20 videoconferencing system as a source for better video quality. Is it possible to connect Cisco C20 with Adobe Connect and if "Yes", what are the technical advices for the connection.
Best regards,
Martin

If you have an on-premise deployment of Adobe Connect you could see if you could configure to the Cisco system to work through the VTC integration, Configure FMG for a video telephony device. However, the Cisco C20 is not one of the supported systems, so it may or may not work.
If you are on a hosted deployment, then you don't have the above option. You could get the video/audio feed into a computer and display it in the Video pod. This may not improve the video quality as the Video pod is limited to its preset resolutions (up to 240p) and frame rates. You may also need to use DVdriver to get a Windows computer to recognize your video input as a webcam.
Third option would be to explore using one of the external video pods available here, Adobe Connect | Apps. You will likely need to do some setup outside of Connect to get them to work, but it could be worth exploring. There are two there that may work: TalkingStick and tecRacer VideoPlayer.

Adobe Connect Pod Functionality: Move it to a second monitor?

Has Adobe ever thought about adding the functionality to move a pod onto a second (dual) monitor while inside an Adobe Connect room? We currently use simulators in our courses and it would be nice if our students could detach the simulator pod from the main room and move it to their secondary monitor.
Thank you,
Luis Duran

Thanks LDuran, for raising the use case. I suggest you provide a formal request to the product team for their consideration. Please use this web form Adobe - Feature Request/Bug Report Form. It shouldn't take more than a few minutes to submit the feature request.
regards,
Ashish

Cisco Video Monitoring System won't connect

Hi,
I have two PVC-300 cameras and I'm using the Cisco Video Monitoring System. I installed the Monitoring System to my laptop and everything worked fine.
Now I'm tring to install it to our receptionist's laptop (with same config file) and it won't work. I've even re-installed Windows and still nothing. I can ping both cameras and I can even login to the web-based GUI, but I can't get the video feed to show from the Monitoring System. The Monitoring System's search finds both cameras, but won't show the video feed. It just keeps "Connecting..."
All the devices are on the same network/subnet. The cameras are on v.1.0.1.13 and Video Monitoring System on v.1.2.1. The laptop (Sony Vaio) runs WindowsXP SP3.
What to do, what to do?
-Petri

I feel like I just answered this question recently, lol
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6918/ps9692/ps9944/ps9950/data_sheet_c78-508956.html
Take note of the section "Network".
RTP: http://en.wikipedia.org/wiki/Real-time_Transport_Protocol
The issue could be a couple different problems, but the most likely is that RTP traffic is not allowed by the firewall. Since they are on the same subnet it is most likely a software firewall. Like windows firewall.
Make sure the systems have windows firewall disabled and retry. If it works you can re-enable the windows firewall and then configure it properly. Here is a article that lists some information that may help you configure the firewall properly:
http://www.microsoft.com/windows/windowsmedia/forpros/serve/firewall.aspx
Much of that document is for windows media server, but windows media server uses the same ports and such as the camera. (thats from memory)

System crash at one end, extremely slow on the other: Using Adobe Connect.

The instructor side is a mac. I can get more info on that later. My system is a windows 7 based unit using Firefox 5.0. I will fill that in later but suffice it to say that all software is up to latest versions on both sides.
Using Adobe Connect for an online class, the instructor's Mac computer kept crashing. He could conduct the class for about 10 minutes. Meanwhile, I saw that when he was connected, my system would slow down to slower than a crawl. If I were to type in these three lines, it would take 3 - 4 minutes just to show up on the screen. When his system crashed, my system would run fine and, as I was still linked to Connect I could talk and chat with the other students. I have the windows tachometer on the screen and it is pinned while he was on line and scarcely above 10 when he was not.
Does this make any sense?
When I check the task manager, it showed that Plugins_container.exe was taking up the CPU time. I looked into defeating the Plugin-Container but that didn't help. I changed over to Internet Explorer but that didn't help. I used a newly set up laptop and IE but that didn't help. It could be my fire wall but it only happend when his system is connected.
If anyone has amy insights on any of all this I would sincerely appreciate hearing about it.

None of that is normal behaviour of Connect.
I suspect perhaps a network firewall or maybe anti-virus scanning.
I suggest that you install the latest Adobe Connect Add-In for the Host or anyone using VOIP audio. The new add-ins are posted to www.connectusers.com under downloads. A new one for each OS was posted a few weeks ago to go with Adobe Connect 8.1.1 and previous versions.

Remote Desktop Monitoring System

I am having some porblem regarding my project on Remote Desktop Monitoring System.
The project is supposed to have the following features:
1.Monitor and Control the computer in a network
2.Send Instant Message
3.File Transfer
We are having porblem on Networking ,Please supply us with the code or description on how to connect computers using Java so we can check on ours....

Remote Desktop Monitoring System is supposed to be a fully java based project. As the name suggests, the project should be able to view the computers(active screens) on the network and perform some specified tasks.
It also should have features like Instant messaging and File transferring between the connected computers.
(It is similar to the available software in Windows XP which helps us to monitor and contorl othe computers in the network)
-In order to connect to each other, the computer should have Remote
Desktop Monitoring Systems Server software or Client software installed in it.
-The main objective of this project is to build that Server and Client software with which we can perform the specified tasks.
-We are using NetBeans to develop the project and MySQL to handle some user datas.
-We have finished the Front End forms for the project and are finding difficulties in networking using java.(since we are students new to java)
I hope the above explanation clears some queries about the project.If anything is not clear please post on this forum and help us.
So if anybody has similar type of project or and concept regarding how to create the Client and Server side software as mentioned above please help us.

Adobe connect add in not showing up in Privacy Settings Mac OS X Yosemite

When I try to share a screen, I am told to click the ENABLE button. I'm taken to System Preferences where I navigate to the Privacy Settings, Accessibility, and I'm instructed to enable adobeconnectaddin. The problem is, adobeconnectaddin is not showing up in this window. I see Skype, which is not enabled, and that's all I see.
Any suggestions? Thanks in advance

As of March 9th, Mac OSX 10.10 will be supported.
Adobe wrote:
We are adding support for the following:
Client systems:
Mac OS X 10.10
Ubuntu 14.04
OpenSUSE 13.1
There isn't more information about what changes that means, but the release notes for 9.4 are here: Adobe Connect Help | Adobe Connect 9.4 Release Notes

Adobe Connect does not show tool pointer/cursor when sharing Photoshop...

I am an online instructor and one of the courses I teach is a Photoshop course. Each week I host a Live Lecture session where we use Adobe Connect to demonstrate techniques and tools in Photoshop CS6.
I am receiving several complaints from students because Adobe Connect does not correctly show my cursor/pointer when it changes for each tool in Photoshop. All the students see is an arrow with a small icon of a face/monitor.
This is confusing to the students, because I am trying to demonstrate how to use a tool and they are unable to see the actual tool. For example, when I select the brush tool - they should be able to see the brush circle as the cursor. I then demonstrate how to resize the brush - but they cannot see it. Another example is any of the healing/cloning tools. If I select the healing brush tool, they cannot see the circle (brush). I then demonstrate how to record a healing point by selecting the Option (alt) key - but again the students cannot see the pointer change to the crosshairs to record the healing point - as all they see is the arrow with icon at all times.
Students are complaining that they are not able to comprehend what I am demonstrating because they are not able to get the full affect of the demonstration without seeing it how it should be. Prior to switching to Adobe Connect, we used WebEx - which showed the students everything correctly as I was demonstrating it. I was amazed to learn that Adobe Connect does not show everything - especially since I am using another Adobe program within Adobe Connect - you would think they would be fully compatible and able to show everything.
Thank you

I just saw this option for the first time last week. Very exciting to see it finally in Connect! There is a small amount of lag for the viewers, but nothing that can't be compensated for.

Where can I download Adobe Connect 8.1.1?

I need to install Adobe Connect 8.1.2 but first I need to upgrade Adobe Connect 8.0 to 8.1.1.
Where can I download Adobe Connect 8.1.1? I have already downloaded Adobe Connect 8.1.2.

You can contact your Oracle Sales rep, and ask them to assist you in getting a copy.
You can open a Service Request with Oracle Support, to request a copy of the software.
You can contact your local Oracle user group to see whether one of the friendly locals has a copy you can borrow.
You can always monitor eBay for the occasional set of CDs. (For example, 8.0.5 for Solaris appeared today.)
However, as far as I know, once it has become obsolete you simply can not download it from an Oracle site.

Idoc (monitoring system BSM)

Hello All,
In the process, to check if communication between SAP and WMS is operational (IDoc) we create a mail, if idoc is not ok.
We would like to connect a failure to a monitoring system BSM by sending and event.
is this possible from an ABAP program? If so, How?
Good answers will be appreciated.
Thanks in advance.
Regards
Sasidhar Reddy Matli.

Hi Vishal,
Please check and implement below notes to fix the first issue:
1570282 - Advance Corr. BPMon ST-A/PI 01N
1946940 - ST-A/PI 01Q SP2: Advance Correction BPMon (Infrastructure and
EBO)
1869678 - Advanced Corrections for BPmon/Analytics Delivered with 01Q SP1
(framework)
Thanks
Vikram

Wireless Client PING-Based monitor system question

Hi:
I joined this forums because i need to recopilate info about a monitor system.
So, i have a relative big wireless network and due to legal instances I MUST use a ping-based monitor system to see the status of my network devices and the final clients on wireless station.
We developed a php linux-based system to make pings every 5 minutes to see if there is a host UP or DOWN. Everything works fine, the server is making the pings to the clients and MRTG generates graphic statistics.
Reference image -> http://img103.imageshack.us/img103/9125/pingred0xq.jpg
The problem is now I have received a notification to make a change on this system to send the pings FROM the clients TO the server and generate statistics.
Is there any difference between making pings from the Client side to the server and viceversa? Does round-trip time is different maybe?
What are the technicals issues on this system?
I accept every critic, advice, suggestion, information, etc.
PS: Sorry my poor english

That's interesting. It sounds as if you may have a good reason for implementing this, but it would also seem to be an inefficient monitoring scheme. A polling interval of 5 minutes does not give that much granularity for statistics even if you are able to make it work from the client side. Also, you would need to centrally collect the statistics in some way. If it were me I would stick to a centrally based monitoring system. I make heavy use of the syslog capabiliy on Cisco access points since they log just about everything. You can even have a syslog monitoring system page you for something as small as dropped wireless connection if you want to go that far.
Sorry if that's not much help, but I would definately have some people look at the big picture before implementing the proposed solution.
Good luck with it.
R Duke

Monitor system

hi all ,
we have monitoring system (SOLARWINS ORION) so we plan to add oracle to this moinoring system
is case if any error or warning send email to our team , i know how to do this vie connected oracle enter prise manger
ro mail server , but this monitoring system will be more advantage , so first i install oracle client on this system
which is windows server 2008 R2 , and i open new connection vie ODBC and it work fine , but when assign this node to mointor system
it's fail and the problem with oracle client can you please give this client i install oracle client 11g.2
see the error below :
testing on node ccbs01:failed with unknown status.
the oracle client software must be properly instaleld to use
oracle QA monitor.
component uses following oracle client driver:MS_ORACLECLIENT.this
particular oracle client software can be downloaded from solarwinds
customer portal under additional components,or
directly from oracle website.
underlying exeption message is :'exception has been thrown by the
target of an invocation.(inner execption message is :system.data.
oracleclient requires oracle client software version 8.1.7 or
greater.)
the error said go direct to oracle website but it's different of normal oracle client due to oracle client driver:MS_ORACLECLIENT
can you please provide me a link of this one ........

i found it sorry , there is some driver must installed in this links
http://www.oracle.com/technetwork/topics/dotnet/utilsoft-086879.html
thanks

Adobe RGB Monitor Problem

I own a dell 2408wfp monitor that works with adobe rgb. photoshop seems to realize that and automatically adjusts the preview colors of srgb images so that it "matches" the srgb color settings. when exporting the image and previewing them in a browser the colors are - of course - way more intense, i guess that's because the browser dosn't render them for an adobe rgb monitor. the problem: the preview in photoshop on my adobe rgb monitor dosn't look nearly like the result on a normal srgb display. colors are just wrong. i get the best (=best matching) results when lowering the color intensity in the monitor settings and look at the result in my browser.
is there any way to disable the "monitor profile" in photoshop, so that it just displays the colors "wrong"/too intense?
thx for your help!

Thanks Dag and others. I apologize if I seemed frustrated, above, especially to Lundberg02 if he has taken any offense. None was meant!
Please permit me a bit of philosphizing for a moment...
You may take all this with a grain of salt, or as the ravings of a madman. It is in NO WAY intended to accuse or label anyone. Instead I simply request you keep an open mind...
I think the one thing that seems to apply stronger to the color-management realm than most others, for some reason, is that people who have found their footing initially believe that their way is the "best" (or sometimes "only") way to actually make color-management work, because it works for them, and because it was pretty difficult to reach this level initially. Out of the goodness of their hearts they want to try to bring others to their level of understanding. They simply have not realized yet that there are still higher levels of understanding.
I only offer this, to those who think this way, because I have been there: Your next level of understanding (and there always seem to be more levels) brings the realization that there is no "one" or "best" way to work - it depends on needs. It is at this stage that you finally realize that all those settings and features represent either the minimum set (or possibly even still a subset) of all the controls REALLY needed to get things right, and that quite possibly others will want to choose different ones - and even different workflows - than you have chosen. It is at this level where one begins to see why what seemed like poor terminology at first was actually chosen.
The next level beyond the above is a maturing of the understanding, over time, where one learns to sometimes change settings to meet changing needs, and one begins to actually exercise all the features and controls in daily operations to better meet his/her goals. It is at this level that one finds oneself revisiting ideas tossed out early on as "invalid" or "wrong", such as setting up a system to use a standard profile instead of a custom one. This is the level where one starts to understand how half-baked the whole system of color-management is, taking into account the OSs, browser and the web, and things beyond just the color-managed apps you use, because of its history.
The next evolutionary step - what has been referred-to above as the "Fraser" level - finds one developing one's own custom profiles, such as linear (gamma 1.0) working spaces or those with special gamuts, to suit particular needs not covered by what's already available. It is at this level that one can develop properly color-managed software, and innovate in the color-management realm (e.g., marry color-management into OpenGL, which has none).
Is there a next level? I haven't reached it, but I believe there must be one. I've not stopped learning.
At all levels, people at lower levels will tend to think any advice you may give is suspect, or outright wrong. Just try to be tolerant - one day they'll understand too.
My best advice:
Color-management is no more important than, say, Angry Birds. It's just stuff that happens on a computer. So don't take it too seriously and try not to get upset over it. And keep climbing the steps!
-Noel

Video Monitoring System

I have just downloaded the Cisco Video Monitoring System. The look and feel are GREAT! BUT... I cant seem to figure out how to make it work for me
I have 2 monitors i would like the Cisco Video Monitoring System on SCREEN #2 not Screen #1.. and there are no setting in the program to make this happen or at least i have not found one. I have tried to run the program with the argument -window and it does not seem to respond to that does anyone have a work around for this? to make this program work for me i must be able to work on screen 1 and have the cisco monitoring program on screen #2 Please help!!!!! ASAP

I am not 100% I understood the question so let me restate it to be sure.
You have a IP based video camera and you want to know if you can use a dynamic DNS service to remotely manage/view the camera.
As long as the video camera is IP based then the use of a dynamic DNS service to remotely access it is possible. In order to do this there are a couple critical steps to make sure happen.
1) Setup the camera so it can be accessed locally via a static IP
2) Configure your border router, for SMB this is usually the firewall, to forward the correct traffic to the camera. If you only have 1 global ip address then you may want to look at PAT aka NAT overloading. If you have multiple global ip adddress' then using 1 via NAT is probabally your best option. Make sure that when your doing this step you also create the access-list rules to allow the traffic to pass.
Now steps 1 and 2 is what you would normally do for any connection from outside the office. The next step is where dynamic DNS will come into play.
3) Setup your dynamic DNS entry. This step will vary from vendor to vendor but generally the people who use a Dynamic DNS service only have 1 Dynamic IP address. If this matches your situation then you can place the dynamic DNS client, or whatever the service uses to identify your current ip address, on a workstation or server that is using the same global ip as the camera. Normally this means anywhere, but if you have more than 1 dynamic global address then be aware of where it is going as you don't want the wrong ip populated for dynamic dns.
Now your done. You should be able to go to access it from your dynamic dns entry i.e. securitycam.dynamicdnsservice.com
Cisco is currently donating money to the Haiti earthquake appeal for every rating so please consider rating all helpful posts.

Adobe Connect Monitoring System

Similar Messages

Maybe you are looking for