Adobe Connect (Training) does not have a quiz/test builder in it?

I assume the answer is "No", because I have done research on the web, asked other Traininers (they have no clue) and found nothing. So is it true that the ability to run a webinar series and not have the option to create a quiz/test that automatically grades (when answers are preloaded)? I am looking all over my AC training room, but nothing.
For comparison (just in case I am wrong), I am looking at WebEx, Go-To-Training, and Blackboard Collarborate quiz manager.
Thanks for any confirmation!

You can create poll questions in the Connect room, but they are not graded. However the answers are tracked and recorded and the individual(s) managing the room can go back and review the attendee responses at any point.
You can use Adobe Presenter or Adobe Captivate to create a presentation with a quiz in it, and then present that quiz in the meeting room. It will also track user responses, but won't track the pass/fail information. That is only tracked using the Training Module of Connect, and can be done by using the on-demand version of the presentation or by pulling it into a Virtual Classroom as a Training Course.

Similar Messages

Problem configuring Adobe Forms: ADSUSER does not have access to method...

I hope all of you are doing well...
So here is a rundown on what is happening.
Enviroment:
Netweaver 7.0
ECC 6.0
Abap and Java stacks are installed on the same system.
Problem:
I am trying to configure Adobe Print forms and not Interactive forms. When I run the test: FP_PDF_TEST_00
I get the following error:
Error Code: 100.102
SOAP Runtime Exception: CSoapExceptionFault : SOAP fault found in SOAP document /User ADSUSER does not have access to method rpData./<ns1:com.sap.engine.services.ejb.exceptions.
When I run the rpData test from the J2EE server I get the following response:
HTTP/1.1 500 Internal Server Error
Connection: close
Server: SAP J2EE Engine/7.00
Content-Type: text/xml; charset=UTF-8
Date: Fri, 03 Oct 2008 15:56:51 GMT
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" ><SOAP-ENV:Body><SOAP-ENV:Fault><faultcode>SOAP-ENV:Client</faultcode><faultstring>User ADSUSER does not have access to method rpData.</faultstring><detail><ns1:com.sap.engine.services.ejb.exceptions.BaseEJBException xmlns:ns1='http://sap-j2ee-engine/client-runtime-error'>User ADSUSER does not have access to method rpData.</ns1:com.sap.engine.services.ejb.exceptions.BaseEJBException></detail></SOAP-ENV:Fault></SOAP-ENV:Body></SOAP-ENV:Envelope>
I would really appreciate all the help that I can get.
Thanks...

Thanks for the tip,
I had actually gone through the note before and tried out a couple of tips that were suggested in the note. I am still having the issue and believe that it might be due to the fact that I do not have a Credentials file installed.
I am applying for the credential and will see what happens.
thanks,
Saif

Adobe media player does not have content after install.

I just got into school for web development and they sent the cs5 master suite, adobe media player came with it. After installing it and logging in, I went to the adobe tv site and seen a slew of tutorials that I would love to use with adobe media player. Everything I do will not add the videos, adding the rss feed only says its not available and there is nothing in it at all. I am very disappointed in this. Hopefully I am doing something wrong.
Please advise

Thank you very much Craig for your help.
For some reason that section on Flash Builder in a Week;
+ Want to view Flex in a Week videos in offline mode?
was not displaying on my browser page. I re-installed java and it now seems to work all ok, and it along
with your advice addresses the issue.
Fritz

The trial version of Adobe photoshop 13 does not have the Crop And Straighten Photos option under file and automate....... all it has is "Fit Image"....... would really like to have that feature.... is it something they eliminated?

I am scanning in many old photos and there are several photos on one page.... I read about a feature that was suppose to be available under adobe photo shop elements 13 that would allow multiple cropping under the file, automate, Crop And Straighten Photos....... the only thing that displays on the version 13 that I have is "Fit Image"...... which doesn't help me...... have they removed this tool or do you have to crop and save one image at a time? Thanks for your help?

You want Image>Divide Scanned Photos

Why does Adobe email me to say I have been removed from my CC membership (because licence was not renewed) BUT Adobe does not have the common sense to tell me my membership is DUE for renewal – so I could have renewed it – BEFORE I was cancelled.

Why does Adobe email me to say I have been removed from my CC membership (because licence was not renewed) BUT Adobe does not have the common sense to tell me my membership is DUE for renewal – so I could have renewed it – BEFORE I was cancelled.

Sign in, activation, or connection errors | CS5.5 and later
For anything else contact support by web chat.
Mylenium

How can I connect my 3gen apple tv with HDMI to my bush LCD32TV022HD which does not have an HDMI port but does have 1)S-Video I/P, 2)Video I/P, 3) L

How can I connect my 3gen apple tv with HDMI to my BUSH LCD32TV022HD
This does not have an HDMI port but does have:-
1) S-Video I/P,
2) Video I/P,
3) Audio Input (Left & Right)
4) Audio In jack (for VGA and DVI source)
5) DVI input
6) VGA input

Welcome to the Apple community.
The Apple TV doesn't officially support a DVI connection, however you may be able to get it to work. You will first need to check that your TV supports either 720p or 1080p as well as HDCP. If you are able to get the video working over the DVI connection, you may also require a DAC in order to connect with Apple TV's optical audio output to the TVs audio imput.
You may well wish to make sure that the DVI connection works before spending any money on a DAC..

Why when I try to login the Itunes Connect with my Apple ID it always says: "Apple ID does not have permission to access iTunes Connect."?

Why when I try to login the Itunes Connect with my Apple ID it always says: "Apple ID does not have permission to access iTunes Connect."?

Look on one of your bank statements and be sure to enter the billing address exactly as it shows on the statement. Some folks forget where they actually get the statement. They put their home address in iTunes/Mac App Store and they actually get the statement at their place of employment or vice versa.

How can I connect my iMac to a TV for playback of videos? My TV does not have HDMI.

How can I connect my iMac to a TV for playback of videos? My TV does not have HDMI.

You need to find out what video out you have on your iMac, and what kind of video inputs there are on your TV.
It will help to know exactly what model iMac and exactly what make/model TV you have.
Depending on the exact model iMac you have, it may have miniVGA, miniDVI, miniDisplayPort or Thunderbolt output. Your TV may have composite, S-video, component, DVI, VGA or HDMI inputs. Once you confirm what kind of ports your iMac and TV have, then we can probably suggest the correct cable or adapter so you can connect them to each other.

The wifi available in the building I live in requires you to accept a user agreement each time you log on (obviously Apple TV does not have the option to display a browser webpage, so is there any other way to connect my Apple TV to the wifi??

Hi guys,
I cannot get my Apple TV to connect to the only available wifi connection in my building.
Basically when I log on to it with other devices you have to type in a password (like all wifi connections) but then it opens a browser window with a user agreement that you have to accept each time you log on. Since Apple TV does not have a browser option I can't log it on.
Is there anyway around this issue???
Or is there anyway to get content from my iPad to display on my Apple TV without an Internet connection on the Apple TV???
Thanks guys!

Is there anyway around this issue???
Or is there anyway to get content from my iPad to display on my Apple TV without an Internet connection on the Apple TV???
Unfortunately not.

How do I connect Apple 20" Cinema Display to orignal MacBook Air which does not have a Fire-Wire port. Is this possible? Any advice would be appreciated. I have the Micro-DVI to DVI adapter. Norm

I Wish to connect my 6 year old Apple 20" Cinema Display to an orignal MacBook Air which does not have a Fire-Wire port. Is this possible? Any advice would be appreciated. I have the Micro-DVI to DVI adapter. Norm

The FireWire cable is just for the FireWire ports on the display. The display will run without it.

I have an older Power Mac and it does not have the ability/hardware to connect to my wireless network.It is on 2nd floor which has no ethernet connections available. How can I get connected wirelessly?

I have an older Power Mac desktop computer. I do not believe it has the hardware to connect wirelessly to my wireless network. The computer is located on the 2nd floor of my house where there are no ethernet network connections so I would have to use wireless to connect to the internet. I have a wireless LinkSys router downstairs that I use to create my wireless network. I also have a Time Capsule upstairs but without the ability to plug an ethernet network cable into it, I cannot use it to get internet access t the computer.
What hardware can I add to give me the abiity to connect the Power Mac to my wireless network?
Is there a way perhaps to link routers? IE. Can I somehow have my existing wireless router downstairs connect wirelessly with the Time Capsule upstairs that i could then plug the Power Mac into for connectivity?
Not sure what version of OS this computer is currently using but do know it does not have the newer dual Intel processors. As such I am unable to update to newer OS versions.

While uselessSABOTAGE's advice is great, in case of future issues, it would helps us in the future if you would post accurate tech specs of your model iMac.
You info states you have an older IMac PowerMac, but is also says your OS X version is OS X 10.7.2.
This is not possible. OS X 10.7.2 Lion only runs on Intel CPU Macs.
Please, go up to the Apple symbol in the upper top left of OS X main menu bar. Click the symbol. Then click About this Mac. A popup window appears that gives some basic info. Then, click the More Info button and both post your iMacs complete specs by selecting/highlighting all of the info and copy paste this into a reply to this post, editing out your iMac's serial number. Then update the info you posted in your user profile with some of this new found data for future postings.

How can I install Firefox on a server that does not have an internet connection?

I run Firefox on a server to display graphs for a program. I was able to save, upload and install Firefox version 21 on my server because it used the executable installation program. Versions 22 and 23 use a stub program that goes to the internet and installs the program. My server does not have an internet connection, so the stub program does not work. Can I get a copy of the executable program that installs the program without having an internet connection?

hello pkautzman, the full install packets that are capable of an offline installation are available at https://www.mozilla.org/firefox/all/.

Internet Connection - Your Apple wireless device does not have a valid IP.

I just bought an Apple TimeCapsule and set it up normally, following instructions to my Arris cable network on the Videotron provider here in Quebec, Canada. The TimeCapsule did appear as a wireless device on my MacBook Pro (after updating the AirPort software from the provided CD - as was instructed). I went through the whole installation process to obtain at the end this error:
Internet Connection - Your Apple wireless device does not have a valid IP.
The only provided instructions were to check the cable and then contact your Internet provider. Well it seems clear to me that if I contact my provider and say that the internet connection works fine directly on my computer, also fine through my "normal" wireless router but not with my new TimeCapsule, I won't get much of a response.
After a lot of research, a friend indicated the solution in my case.
You have to really reset the cable modem to convince it to start giving out IPs again.
To do this:
1. Unplug your TimeCapsule (possibly you might have to reset to factory defaults - see the documentation)
2. Unplug your cable modem
3. Reset your cable modem by pressing the reset button with a pen (or something) for several seconds.
4. Plug your cable modem back in and let it reboot/restart - until the lights are back on.
5. Plug in your TimeCapsule
Everything should now work and you can restart your AirPort set-up on your Mac.
Good luck!

My ISP is AOL. The service is DSL via a broadband modem. Somewhere during the setup process there appears to be a communicatiosn issue between the Airport Extreme Base Station and the DSL modem. When I hook the DSL modem directly to my iMac I can connect to the internet without any issues.
I tried the factory reset and the DSL modem reboot process described in other posts and seemed very close to success...until the internet setup step. That is where this issue first presented itself.

Device is connected to to a wifi network but does not have access to Blackberry services over wifi connection

please help me, my blackberry curve has been working perfectly fine (everything network and wifi connection are working great) since i got it but all of the sudden when i connect to our wifi at home i noticed that the wifi logo on the upper screen is grayed out. i checked the manual and it says: device is connected to to a wifi network but does not have access to Blackberry services over wifi connection. i dont know what to do, i tried the hard reset (removed batt for 1 min while phone is on and put it back in) i also tried to remove the wifi profile and added it back up but still nothing seems to work, my service provider has BB services available on my phone, i can received BBM, pushed email, use FB on my phone using my network but i cant use my wifi to browse.. what should i do? help me please!

With a PC, the Windows Firewall and/or the anti-virus software will sometimes block an attempted Internet connection.
Check both applications to see if you can find a "blocked" item and then take steps to "allow" the connection.
If still no luck, temporarily disable the wireless security for a short period to see if the PC can connect that way. If it can.....then you know it is security related issue.
See if the PC can connect using a setting like WPA-PSK-TKIP. The equivalent Apple setting would be WPA/WPA2 Personal.

TS1398 After updating to ios 6 my iphone 4 would no longer connect to my home wifi. At work we have a free wifi connection that does not require a password. However my wifi at home is password protected. I have the right password. It works on my ipod touc

After updating my iphone 4 with the ios 6 update. My iphone would no longer connect to my home wifi that is password protected. I know that I have the right password entered in. At work we have a free wifi connection that does not require a password and I can connect no problem to it. My ipod touch has no problem connecting to my home wifi. It is a 3rd gen ipod and does not have the ios 6 update on it. Please help!

I'm having the same issues. Started when I upgraded iphone 4S and ipad1 to 5.1.1. Wife's iphone 4g on 4.4.2 has been ok. I've forgot the network on both devices and restored the iphone, none of which changed the issue. I've upgraded to ios 6 on the iphone 4s, problem still persists.
One thing that will help for a time: go to your router and change the wireless control channel. When I first did this I got full connectivity for about 48 hours... and now the problem is back. I'm now changing the wireless control channel every 12 hours, which is a pain but at least keeps me connected. I've tried a few other solutions that are out there and that has been the best one so far.
to do this on a motorola router: type 192.168.0.1 in your address bar.
username: admin and password:motorola if you have not changed the factory defaults.
Click on the word "wireless" and look for the "control channel" field. This may be set to auto or to 1, try changing it to 6 or 11 (preferred) or any other channel.
The control channel can cause static in the wireless system IF there are several networks nearby that are on the default setup.
There is a fair bit of buzz about this issue out there, some other things I've seen:
This is a hardware issue. Go to the store and have your wifi antenna checked, some users reporting that they get free replacement devices.
Check against other wifi networks that require a password (this is next for me). Logon to those networks and surf until your wifi stops. If your wifi connects to the internet but stops responding, then this is a software (or hardware) issue and apple needs to step up. Some are claiming this to be the case.
IF you connect and stay connected/on the internet on another password protected wifi, then the issue is with your router. this is where things get cute.
Comcast may tell you to update your firmware. Motorola may tell you that your cable provider is the only one who can push through firmware updates. Comcast may tell you that you are not in an area that is being updated. It's unclear if they say that to all customers, or just those who have purchased cable modems and aren't renting them from comcast.
Good luck, more to come if I figure out anything else, and please post any solutions you may find.

Adobe Connect (Training) does not have a quiz/test builder in it?

Similar Messages

Maybe you are looking for