Adobe Connect training video for the Learner and their engagement in virtual sessions

I am looking for a short Adobe Connect video on the Learners' role in virtual collaboration, communication and their engagement in virtual sessions: their use of the tools, expectations, etc.  A training video for the virtual learner.

I am currently having the same issue, the only difference is that I am publishing Captivate projects into Connect courses/curriculums.  The Captivate (v5) projects are basically a demo and I want the attendee to receive credit for viewing the demo after the demo window closes (the setting at the end of last slide).  I have tried to enable/disabe the Quiz reporting along with other settings with no luck.  After the demo closes I receive a pause icon and I want a green check mark.  Any assistance would be GREATLY appreciated.  Thank you.

Similar Messages

  • I accidentally bought a video for the SD and HD version, one version downloaded but the other won't, how do I fix this?

    Ok so I wanted to buy this movie, I accidentally bought the SD and HD version. One version loaded but now the other one won't. I tried turning my phone off and restarting it, that didn't help. I put my password in and that didn't help. All it says is that it is waiting to download. Each time I go into the iTunes Store it asks for my password. It is very frustrating because I can't even delete the video from downloading. Can anyone help?

    From the Store menu, select
              Check for Unfinished Downloads...

  • When Viewing Adobe Connect Training, why are Audio/Video out of synch

    I am a new Captivate 5.5 user and I have been using the Adobe Connect Training material to come up to speed on the product. However, I have noticed that when viewing presentations in Connect, over time, the audio and video eventually are completely out of synch. What is being discussed (in the audio) has nothing to do with what is being shown on the screen. This happens on all Connect Training videos.  I have a high-speed Internet connection and I never have problems with streaming content from other sources such as YouTube, etc.  What am I doing wrong?

    Dang, though it was worth a shot.
    Now, one user here, Jim Simon, uses similar, and has worked out a percentage that he adjusts the remote mic's material to fit with his camera. Cannot recall exactly now, but it seems that he alters the Audio by a factor of about 104%. My memory is cloudy on the exact figure, and Jim seems to be on extended holiday. Not sure now, if he uses the Rate Stretch, or runs his mic's audio through Audition. Sorry that the memory is so fuzzy now.
    Good luck, and maybe Jim will show up with his exact figures, to give you a starting point.
    Hunt

  • How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

    How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
    To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips.  This operation has been stalled by the spinning ball. Shut down restart has not helped.
    The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
    What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

    How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
    To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips.  This operation has been stalled by the spinning ball. Shut down restart has not helped.
    The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
    What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

  • I forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

    i forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

    You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
    This will tell you how to restore
    http://support.apple.com/kb/HT1414
    You will probably need to use recovery mode
    http://support.apple.com/kb/ht4097

  • I connected my iphone for the first time to itunes and lost everything. How can I recover my data?

    I connected my iphone for the first time to my itunes. It didnt have any backup or anything saved on icloud. As soon as i plugged it in, on itunes it asked if I wanted to restore, or backup, my ipod to my iphone or something (I dont remember) and I clicked yes. I thought that it was syncing music, and apps that i had on my ipod but instead it made my iPhone 4s into a copy of my ipod touch from the last time i synced my ipod (august 2012) now i have lost all of my contacts, pictures, messages, calls, emails and everything else I had on my iphone... is there any way that I can recover anything and get it how it used to be before all of this happened? i did not save anything on the computer or on itunes backup...

    Sorry saker, but if you have not backed up your data anywhere, and you told the computer, in essence to clear the data and restore it with your iPod data, then you are pretty much out of luck....
    Cheers,
    GB

  • Why does my Airport Express say "self assigned IP address"?  No IP address for the ethernet, and it is not connecting to my cable router any longer...

    Why does my Airport Express say "self assigned IP address"?  No IP address for the ethernet, and it is not connecting to my cable router any longer...

    Some cable providers.....like mine, a well known company......seem to take anywhere from a few moments to sometimes up to 30 minutes to allow their equipment back at the cable company to fully reset and issue a new fresh connection.
    So, it would not hurt to leave things powered down for 15-20 minutes or more when you perform the reset that John Galt suggests.

  • I have a hard drive for CD storage that needs to connect to the Ethernet router. sInce my router is not in this room, and in another room, I want to use my Mac as a router for the drive, and share the wifi. Ho do I do this

    I have a hard drive for CD storage that needs to connect to the Ethernet router. sInce my router is not in this room, and in another room, I want to use my Mac as a router for the drive, and share the wifi. Ho do I do this? I gace tried the System Preferences -> Sharing, shared internet to Ethernet, but can't se ethe device on Finder

    Djembe wrote:
    UEFI (unified extensible firmware interface) boot requires Global unique identifier Partition Table (GPT) as opposed to the older Master Boot Record (MBR). If your existing drive is formatted in MBR, you will need to adjust BIOS settings to enable legacy boot in order for it to work properly.
    Is there a performance difference between GPT and MBR? If GPT is better, I do not mind formatting the drive with it.
    5. No special drivers are needed.
    Thanks. What about the thunderbolt port?
    7. I think Lenovo estimates 6 hours.
    Lenovo says 6 hours with the 6-cell battery on its website.
    BrendaEM wrote:
    Hi,
    There was a serious BIOS/UEFI problem with that SSD . Perhaps this thread will save you some headaches. Someone is recomending shutting off Rapid Boot in the setup, which would probable mean little with a SSD, anyway.
    I read through this, and it looks like the problem was fixed in a BIOS update, which I plan to do. However, it also seems like Intel Rapid Start is not even worth it in the first place, as sleep consumes almost no power at all.
    W540: i7-4700mq, K2100m, 8 GB DDR3L, 512 GB SSD
    T510: i7-620m, NVS 3100m, 8 GB DDR3, 512 GB SSD

  • I have Photoshop CS2 for the MAC and it stopped working on my MAC. I recently bought a new MAC, an iMAC. There appears to be no way to contact Adobe about this.  What do I do? Ed

    I have Photoshop CS2 for the MAC and it stopped working on my MAC. I recently bought a new MAC, an IMAC and it doesn't work on that either. There appears to be no way to contact Adobe. What do I do? Thanks, Ed

    That because the activation servers were retired. Now for the good news:
    Adobe has provided a non-activation version of Photoshop CS2 free of charge for their CS2 license holders.
    Download the Mac version of Photoshop (not the suite) and copy down the serial number next to it.  Do not use your original serial number or cs2 disc.
    Download Acrobat 7 and CS2 products
    Uh... one more thing CS2 is PPC only.  OSX 10.6.8 has Rosetta to run legacy PPC products. 10.7 and above will not.
    Good luck,
    Gene

  • I work for the County and we purchased a copy of Adobe Photoshop CS2 long ago.  The person that did the order is no longer here.  All I have is the CD Disk that is new but i did not know the key code is.  Is there a way to get the keycode for this?

    I work for the County and we purchased a copy of Adobe Photoshop CS2 long ago.  The person that did the order is no longer here.  All I have is the CD Disk that is new but i did not know the key code is.  Is there a way to get the keycode for this?

    It would not work anyway. The activation servers have been retired and Adobe has provided a new CS2 download along with a new serial number for CS2 owners.
    Download Acrobat 7 and CS2 products
    Gene

  • I just purchased Adobe Photoshop Elements 13 for a Mac and trying to install. I am at the point to enter the serial number but it won't take letters. What do I do and where do I go for help?

    I just purchased Adobe Photoshop Elements 13 for a Mac and trying to install. I am at the point to enter the serial number but it won't take letters. What do I do and where do I go for help?

    If the code you are trying to enter has letters then you are not looking at a serial number.  A serial number only contains numbers - 6 sets of 4 numbers.
    Find your serial number quickly
    You might be dealing with a redemption code.  This is especially so if you purchased it from a store or the like.
    Redemption Code Help
    http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  • My PowerBook G4 says that it's connected to wifi, but it still no internet connection. The connection will work for a while, and then I'll have to run diagnostics and it will work again for a few minutes and then stop working again. What's going on??

    My PowerBook G4 says that it's connected to wifi, but it still no internet connection. The connection will work for a while, and then I'll have to run diagnostics and it will work again for a few minutes and then stop working again. What's going on??

    Basic troubleshooting techniques for any problem
    Restart the computer = joy?
    Reset the router = joy?
    Restart the computer in Safe Mode = joy?
    ask yourself "What changed immediately preceding the onset of the problem?" = Anything... hardware, software, cabling, environment (interference source)
    ÇÇÇ

  • I am trying to play some videos from the internet and I get the message missing plug in.  I click on "missing plug in" and download adobe flash player.   When i try to log in again to play videos, I still get the message missing plug in.  Any suggestions?

    I am trying to play some videos from the internet and I get the message "missing plug in".  I click on the message and downlaod adobe flash player as prompted.   When I log in again to play the videos,  I still get the missing plug in message.  Any suggestions??

    that used to happen to me all the time! I would recommend going to a different sight or attempting to download it again ( you may have missed a step it can be tricky).

  • My iPod has not been working for a month now and i was hoping that you could help me.The part where you charge and sync the iPod is not connecting.There is defiantly not the lead as we use it for the iPhone and that works please could you help!

    my iPod has not been working for a month now and i was hoping that you could help me.The part where you charge and sync the iPod is not connecting.There is defiantly not the lead as we use it for the iPhone and that works please could you help!
    yours sincerly
    jackfromsurrey

    What I am saying is ..........
    The iPhone HAS to be active making calls on the UK carrier network for the carrier to identify as "theirs" and therefore eligible for the Carrier to unlock
    The way to achieve this is to use a PAYG sim making and receiving calls to establish a customer relationship  with the Carrier and then follow the Carrier's process to unlock
    With a PAYG it usually means adding a specified (by the carrier ) amount  usually £15 /£20 depending on the carrier
    This is how O2 function and according to Gemma  this is how Vodafone work

  • I have a Nikon AW100 and I use a SanDisk for the memory and I download that with My Pictures and Videos but I cant get my videos onto IMovie

    I have a Nikon AW100 and I use a SanDisk for the memory and I download that with My Pictures and Videos but I cant get my videos onto IMovie

    Hi
    I import all from my Nikon - into iPhoto
    Then closing it and opening iMovie
    In the Event window like
    • iPhoto-videor - Here I find mine.
    Yours Bengt W

Maybe you are looking for

  • New Field Addition in  Allowed Field Catalogs -Pricing.

    *Hi, We have requirement of having Material Description field in the Allowed Field Catalogs in SPRO --> SD --> Basic Functions --> Pricing --> Pricing Controls --> Define Condition tables --> Allowed Field Catalogs in order to fetch the same for Pric

  • Creating New Users for RDBMS realm

    I am currently creating new users in the RDBMS realm by an EJB that will insert into the "Users" table. Is this the correct way to create users or should I be calling methods on classes in examples.security.RDBMSRealm? Thanks Bill.

  • How do I run 4000 series ADAM Modules in LabView

    I am trying to operate up to 4 ADAM modules (2 x 4024, 1 x 4012 and 1 x 4060) through LabView 6i running on Windows XP. I have tried to download and use a copy of the Advantech 32-bit LabVIEW driver from a foreign, non advantech website but when inst

  • Selction-Screen Query??

    Hi.. I have a date field on my selection-screen. And I want 2 things for it.. 1) I want a default value of sy-datum - 30 days for that field.And to implement it I have done the following Coding:-- INITIALIZATION.   V_DATE = SY-DATUM - 30.   SELECT-OP

  • Generating FREELIST storage clause from Designer

    Hi, We are using Designer 6.0 to generate our tablespace and table DML. I am currently trying to get Designer to generate a CREATE TABLE command of the form (where the FREELIST GROUP clause is the subject of this question). CREATE TABLE test_table( i