Adobe CS2 and Snow Leopard - do I have to buy CS4 to use SL?????
That is RIDICULOUS!!!!
In order to use Snow Leopard I have to spend 1,000 in a new CS suite!!????
Adobe is in debt with all the CS, CS2 and CS3 users who can't install a new OS on their Macs
because there is no support for CS old Versions.
Shame on you Adobe!!!
We demand a patch to solve this situation!!!
Old CS users United!!!!
Have you yet complained to St. Steve of Cupertino that Apple does so little to maintain application compatibility when they release new versions of their operating systems?
It is a primary rule of operating system development and maintenance that you maintain full compatibility with existing applications and not break such compatibility just for the purpose of being "neat and cool, cool and neat."
If you are willing to spend time and $$$$ to upgrade your operating system to a new and incompatible version, you should be prepared to also spend money for versions of applications that had to be seriously rejiggered to work with these incompatibilities.
Adobe didn't break compatibility, Apple did. Complain to them!
- Dov
Similar Messages
-
Hi everyone,
I have a MacBook Pro with a 2.2 GHz Intel Core 2 Duo Processor. I installed CS2 months ago with no problem, but since I've upgraded to Snow Leopard I've come across some issues. I had to do a complete wipe and used Snow Leopard instead of the original DVD that came with the laptop (at the suggestion of my IT guy) because of another issue with one of my accounts and since then, some programs need Rosetta to get them opened initially. The only one I'm having a real issue with is my CS2. I can't afford to upgrade, which is why I'm still with CS2. I get the following message: "An error has been detected with a required application library and the product cannot continue. Please reinstall the application."
I have uninstalled, reinstalled and am still getting the same message. Does anyone have any ideas how I can remedy this situation besides upgrading to the newest version.
Thanks,
JenaI have been using CS2 for a while, and since I installed Snow Leopard, InDesign CS2 is the one which has given me the most difficult time. Apparently, Rosetta and the PostScript language have some problems communicating together. As soon as I have to do something which involve transparency setting (pasting a graphic from Illustrator, trying to make a PDF which contains an imported Illustrator file...), the application crashes. I tried from InDesign directly (almost never works), from the Print menu (ditto), and sometimes I succeed in making a PS file that goes successfully through Distiller.
I didn't have much trouble with Illustrator and Photoshop, though. The only thing It seems I can do is trying to find me a legit copy of CS4, if such a thing still exists. -
I am running snow leopard, do i have to buy lion first before i can download lion server?
i am running snow leopard, do i have to buy lion first before i can download lion server?
Snow Leopard client or Snow Leopard Server ?
-
CS4, Adobe Updater, and Snow Leopard
Hello, all. I have installed my copy of CS4 onto a fresh install of Snow Leopard. The adobe updater does not recognize any new updates. I did, however, go to the updates section and download the newest version of camera raw and CS4 11.0.1.
Has anyone else been able to update CS4? Any suggestions? If I recall, I believe there were Bridge updates, etc, since the original release of CS4. I have the original DMG of CS4 for Photoshop, without the patches.
Thanks,I am also in the camp of not receiving new updates from Adobe Updater in Snow Leopard. I did a fresh install as was mentioned earlier as well (erase the disk, install Snow Leopard, followed by Software Update to get 10.6.1 and then installed CS4). Adobe Updater didn't find any updates... Then I installed most (if not all by hand) and then Camera Raw 5.5 came out and I still didn't see any updates. I did end up installing that one by hand as well, but before I did that I lookad at the aum.log file and saw these messages around the Camera Raw queries...
2009-09-21T04:08:50: GetAppIDUpdates: getting available update info for AppID: cameraraw5
2009-09-21T04:08:50: Could not find AMT folder at: = /Library/Application Support/Adobe/Camera Raw 5/Contents/Resources
2009-09-21T04:08:51: Could not find AMT folder at: = /Library/Application Support/Adobe/Camera Raw 5/Contents/Resources
2009-09-21T04:08:51: GetAppIDUpdates: getting .upd file: http://swupmf.adobe.com/manifest/60/mac/cameraraw5.upd
2009-09-21T04:08:51: GetAppIDUpdates: MFS_New - parsing new .upd file = 1
But then again I see those same messages in my 10.5.7 system that works fine... So it doesn't look like it logs anything to explain why its not finding any updates.
I may try uninstalling and reinstalling just to see if that helps... Would be nice to get a resolution to this. -
My mac (G5) is out of order. I am waiting for a mac pro 8 core. But I still work with Photoshop CS2 and can not today buy the CS5. Is the CS2 can run on Snow Leopard and on this mac pro ?
ThanksCS2 was only written for PPC. It will run on an Intel Mac through Rosetta emulation, possibly slower than it did on your G5.
This is a really good time to consider an upgrade to CS5, especially since you will not be able to upgrade to CS6 from CS2. (or stick with PPC Macs to continue to run CS2) -
Problems with iCal Server 2 and Snow Leopard Clients
I am currently running iCal Server 2 on Snow Leopard Server, with approximately 6 client computers connected to a single shared calendar account. I have digest authentication enabled, and am thus using Kerberos (but not SSH), as well as 3 iPhones.
Upon initial connection, I can get all the clients - computers and phones - to properly pull down all the calendar data, and match one another. However, several of the computers are having trouble updating properly when new events are added. After some troubleshooting, it seems that the computers running Snow Leopard are not properly updating with events that are entered from other computers, either Snow Leopard or Leopard. They can, however, post events to the server themselves without any errors. Interestingly, the Leopard computers can push and pull updated events just fine, and will update with new events whether they originated from a Snow Leopard or a Leopard client.
We had some recurring login/authentication issues a while back, which seemed to resolve when I disabled digest authentication; I'm wondering if perhaps that has something to do with the problems now. We're mostly using BusyCal as client software, with the iPhones obviously using iCalendar.
Just looking to see if anyone else has had similar problems, with Leopard clients working well and Snow Leopard clients having issues. Thanks!Noby_me,
A lot of folk are having major issues with many Adobe programs and Snow Leopard. You are not alone. For many, rolling-back to Leopard has been the cure. From "word on the street," it appears that Apple is aware of these issues and are working on an OS update. I have no schedule, but that word was out about a month ago, so let's hope that the update is soon in coming.
You might want to do a Search on this, the Encore and the PS fora for "Snow Leopard." There are plenty articles.
Good luck,
Hunt -
AVCHD and Snow Leopard (I-Movie / Final Cut Express)
AVCHD and Snow Leopard. I have been using Final Cut Express 4 and I-Movie 08 since they both came out. I have been using the same AVCHD camcorder (Cannon HG10) with both programs, and it has worked perfectly. Now I have installed 10.6 and 10.6.1 and now neither program will allow AVCHD transfer. Both recognize the camcorder but won't transfer.
A little poking around on the internet and I discovered that Snow Leopard won't support AVCHD (http://www.shedworx.com/no-avchd-in-snow-leopard). Third party web site mind you.
So far I agree it won’t work with AVCHD. Now since both programs were developed to use one of the most widely utilized formats in HD camcorders, again AVCHD, this accidental or intentional over site smells of Microsoft, not Apple.
I like some of the features of Snow Leopard but for me the video aspect is one of the top requirements. Apple had been the leader in the multimedia revolution and this mis-step with AVCHD is it’s typical of Apple.
I have just restored back to 10.5 and every thing is working again.
Now that were around the block here is the question. If anyone can come up with a solution…that does not include the used of third party software to convert, please let me know.
And to Apple, please fix this problem, I’m already hearing the complaints with QuickTime X, and seen the headlines, “Snow Leopard, is it Apples Vista?”.CAM2399 wrote:
A little poking around on the internet and I discovered that Snow Leopard won't support AVCHD (http://www.shedworx.com/no-avchd-in-snow-leopard). Third party web site mind you.
This is, to be polite, a misunderstanding. Shedworx are being careless with their terminology.
1. SL itself does not support AVCHD, but neither did Leopard.
2. AVCHD support is built in to the movie editing software (iMOvie, FCE, FCP), exactly as it was in 10.5
3. I am happily editing AVCHD from my HG10 in iMovie 09 and in FCP, in exactly the same way I did under 10.5
So you have a specific issue with your camera, you've taken that with some carelessness from Shedworx, and on that basis you've decided, incorrectly, that Apple does not/will not support AVCHD.
There were many cases under Leo where people reported problems getting their camera to communicate with iMovie. Solutions include:
1. Trashing iMovie preference files
2. Repairing permissions
3. Copying the AVCHD folder tree from the camera to disk, and importing to iMovie from there
4. Using MPEG Streamclip to convert the camera footage before importing to iMovie
5.Making sure the camera is running on mains power, not battery, and that it's in playback mode. -
Iphoto 11 and Snow Leopard - problems
With iphoto 11 and Snow Leopard, I now have a complete mess. Most of my photos and events are totally mixed up, out of any recognizable order.
Make sure iPhoto is fully up to date (version 9.1.3), Load your iPhoto library backup and convert your library again
Or provide a lot more information than "my library is a mess" - maybe there is some assistance that someone can give you if they know more
LN -
New iPod Touch won't sync with computer - have latest version of iTunes and Snow Leopard (10.6.8). Computer won't even acknowledge the iPod. Have restarted both, changed ports, etc. What's do I need to do?
Have you tried here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Do not forget the Additional Information topic. -
iPod touch second generation. Trying to sync to mac. Have updated itunes and snow leopard. When I plug it in, it is recognized in iphoto, not itunes. ipod is freezing. Have tried several times to set back to factory settings, but computer wont see it
Try here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
How do I erase my hard drive? My initial operating system was Snow Leopard but I have upgraded to Mavericks OS. My Snow Leopard install disk ejects when I try and use it.
Do a backup, preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
OS X Recovery
OS X Recovery (2)
When you reboot, use Setup Assistant to restore your data. -
I have a MacBook Pro with Intel Core Duo and Snow Leopard 10.6.8. Would like to upgrade to Lion but it requires a minimum of Intel Core 2 Duo. Can I get what I need or do I have to buy new MacBok Pro?
I also have a core duo MBP with Snow Leopard and it runs perfectly. There are very few things it cannot do as compared to the faster, newer MBPs, but that is attributable to the CPU, not the OS. There are some who view Lion as downgrade rather than as an improvement. If there are important applications that reqire a fast CPU or Lion features that you find essential, by all means get a new MBP.
I have an aphorism: Obsolescence is more often a perception rather than a reality. Besides the silver keys look much classier than the black ones.
Ciao. -
I have a windows bootcamp on my macbook. I need to download OX Lion and Snow Leopard so I can . If I do download both programs, will I loose my bootcamp functionality?
Much apprecitive.In addition to what Kappy suggested, please check your Mac against the hardware requirements of Lion before starting this project.
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Allan -
Does adobe make a version for a older apple computer, with a safari version 5.1.10 and snow leopard 10.6.8 .
Flash Player is still supported on that os/browser combination (see Adobe Flash Player | Tech specs). You can download the latest version from http://get.adobe.com/flashplayer.
Maria -
Can I have both Lion and Snow Leopard on One Hard Drive?
My problem is I need to run a PowerPC game on Lion which Lion no longer supports. So i thought i could download Snow Leopard back to my Mac and partiition my hard drive in the process as that is the only way i know of to have both Lion and Snow Leopard. I went through the Boot Camp Asistant process and it seems it will only partition Windows 7 to my Mac when i need Snow Leopard. If anyone has any idea how to help me have both Lion and Snow Leopard at the same time on just one hard drive or figure out how to run the PowerPC programs on my Mac (if there is a way around it). The help will be well appreciated!
How To Run Snow Leopard On A New Mac
This does not apply to new Mac Minis or MacBook Airs. When newer models are introduced that also require Lion for hardware support, the techniques described below will no longer work with the possible exception of using Parallels 7.
What has to be done:
Create a new partition on the hard drive.
Get a clone of a 10.6.8 Snow Leopard system. Put the cloned Snow Leopard system onto the new partition.
Step One: Create a new partition on the hard drive
To resize the drive and create a new partition do the following:
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Step Two: Obtain a clone of a Snow Leopard system:
You will need access to a Mac already running Snow Leopard. You will need a 16 GB USB flash drive or an external hard drive to which you can clone the Snow Leopard system from the Mac that has Snow Leopard installed. Alternatives are:
Option One:
Install a new Snow Leopard system onto a USB flash drive. Boot the Mac used for installing with the USB flash drive. Update the flash drive system to 10.6.8 using the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard. Verify that you can boot the Mac with the USB flash drive.
Take the USB flash drive to your new Mac and try booting from it. If it works then clone the system from the flash drive to the newly made partition:
Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the new partition on the internal drive. Source means the USB flash drive.
Option Two:
If you have a large enough external drive you can erase and use, then it would be easier to just clone the entire Snow Leopard system from the source Mac computer to the external drive.
Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external drive. Source means the Snow Leopard Mac's internal drive.
After cloning verify that it will boot the source Mac. If so then take the external drive to your new Mac boot with it. If all is well then restore the clone to the new partition on your new Mac:
Restore the clone using Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the new partition on the internal drive. Source means the external drive.
If the above seems too daunting then you might consider running Snow Leopard inside an emulator such as Parallels 7. You are permitted to install a single copy of Snow Leopard inside a virtual machine. You will need to first purchase a copy of Parallels 7 and install it on your new Mac. Create a new virtual machine configured for Mac OS X. You may then install Snow Leopard in the virtual machine then download Mac OS X 10.6.8 Update Combo v1.1 and update to 10.6.8. Be sure to include Rosetta in your initial Snow Leopard installation. Rosetta is not installed by default rather it's an optional install.
Maybe you are looking for
-
Change text colour based on text in another text box
I am playing around with data merge in CS6 to layour customised artwork and I'm stuck. I have the data merge working no probs, bringing in the correct artwork and the names to go on the artwork. What I cannot seem to acheive is how to get the names t
-
I've got a new MacBook Pro Retina from october 2013 13" (8 gb Ram and 256 gb SSD). I had the "freezing" issue that was solved with the firmware EDI update. But after this update i have now another problem: often during web browsing the scroll with 2
-
My open tabs are not being restored/remembered after closing
Hi, I have my settings set to "Show windows and tabs from last time", however for some reason its not working anymore. Whenever I close my tabs, Firefox warns me that I'm closing multiple tabs and when I reopen Firefox, I only get my homepage. In the
-
Install SMC Server 3.6 in Sol 10 local zone?
Dear all, Is it possible to install and running SMC Server 3.6 in local zone with whole root (not sparse) steup? thanks
-
Upgrade directly from 1.2 to 2.0?
Hi, Do I need to upgrade from my current version of 1.2 to the last pre 2.0 version (1.4 or whatever it was last on) before I can upgrade to 2.0? Thanks a lot. -keith.