Adobe CS6 and Retina iMac

Hi
Has anybody had any experience of the Adobe CS6 Creative Suite package and it's compatibility with the new Retina iMac?
Any advice would be gratefully received.
Regs
K

Here is what I have:
MacBook Pro Retina 15-inch (late 2013)
Mac OS 10.9.5 (also have 10.10 partitions on this system)
PrPro CS6 (v. 6.0.5 - 001)
as well as AI, Br, Au, ID, Pl, PS CS6 and several others (basically , the CS6 collection + Acrobat, but not Lightroom
So we're close enough in setup to be reasonably sure that it's not specific to that. At this point I recommend going through this basic list of troubleshooting steps, if you have not already:
Sign out from Creative Cloud, restart Premiere Pro, then sign in
Update any GPU drivers
Trash preferences
Ensure Adobe preference files are set to read/write
Delete media cache
Remove plug-ins
If you have AMD GPUs, make sure CUDA is not installed
Repair permissions
In Sequence Settings > Video Previews, change the codec to one that matches your footage
Disconnect any third party hardware
Reboot

Similar Messages

Which is more important for Adobe CS6 and FCX on imac? Processor or Graphics Card?

Hi, I want to get the new 27" imac when it comes out this December. It will be my first mac although I have both an iPhone and iPad. I'm and artist and aspiring filmmaker and want to run Adobe CS6 and Final Cut Pro on it. I'm looking at the highest 27" but have limited funds for additional upgrades. Apart from RAM, what would i be better off upgrading on the imac? Going from the i5 to the i7? or going for the GTX 680mx Graphics card with 2gb of memory? or going for the 1TB Fusion drive? If you could only pick one or possibly 2, which would be the best to choose for video and graphics on the programs I mentioned? (I'm not into gaming, so performance on that front is of no concern to me)

I don't have CS6...
1) I would max out the video card. FCP X and Motion 5 uses the GPU over the CPU for processing power. Once you buy your new iMac you can't upgrade this...
2) FCP X and Motion 5 will use all the ram you can throw at it. I have 16 GB of ram and both programs at times uses all 16 GB of ram. I really should bump up my ram to 32 GB. I would say 16 GB is the minimum for video.
3) The processor would be last on my list. Computers are really fast even with an i5 processor. Once you buy your new iMac you can't upgrade this...
This is the iMac I bought last year:
27" iMc mid-2011
3.4GHz Quad-Core Intel Core i7
16GB 1333MHz DDR3 SDRAM - 4x4GB
2TB Serial ATA Drive + 256GB Solid State Drive
AMD Radeon HD 6970M 2GB GDDR5
Apple Magic Mouse + Magic Trackpad
Apple Wireless Keyboard (English) & User's Guide

HELP! Jerky playback on Premiere Pro 6.0.2 CS6 and Retina MBP (16GB)

Dear all!
Please help me to solve this problem!
It's going on Premiere Pro 6.0.2 CS6 and Retina MBP with 16GB RAM installed.
CUDA Driver Version: 5.0.24
MacBook Pro Retina, Mid 2012
Processor 2,7 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GT 650M 1024 MB
Software OS X 10.8.1 (12B19)
Adobe Premiere Pro CS6 (6.0.2. - 072)
While playing back inside PP a jerky playback occurs, every 1-2 seconds it rewinds to 2-3 frames back and continues to play forth...
No special console messages or something similar visible.
Have tried to clean the cache but it doesn't help. Also have tried to switch the mode between CUDA, OpenCL and SW - without any visible changes...
Exhausted... Please HELP!!!!

avrbox, I had the same problem and went crazy because I didn't find a proper solution. I use Windows, though. Finally, I got to fix the problem. I use a i5 processor, which I overclocked with an asrock tool that came with the mainboard (to about 3350 MHZ where the system ran stable). When I turned overclocking off, Premiere played back the clips just fine. I overclocked then step by step until the playback went jerky again and kept that frequency. Maybe your processor is overclocked by stock or you did it manually?
Hope this is your solution!

Today i download adobe cs6 , and install in as trial, when i open my cs6 , it open and close automatically

Today i download adobe cs6 , and install in as trial, when i open my cs6 , it open and close automatically
i want to try the adobe cs6 , 1st in trial time
i am beginner for Photoshop,

os win 7
process: Intel(R) Core (TM) i3cpu 540 @ 3.07Ghz 3.06
Ram: 4GB
Type: 32 bit

I have adobe cs6 and I can't get bridge or mini bridge open. All I get is "waiting for bridge." can anyone help?

I have adobe cs6 and I can't get bridge or mini bridge open. All I get is "waiting for bridge." can anyone help?

This tech doc should help. Simply try out each step one at a time until it works.
Error: Waiting for Bridge | Mini Bridge panel
Gene

Can i use Adobe CS6 and Autodesk in iMac 21 inch?

First, I'm a student.
I consider to buy a iMac these few week
I am confused to choose the suitable one
iMac 21" i read the specification, it showed 5400rpm, 512mb display
but the Adobe website said CS6 NEED 7200rpm and recommand 1gb display
Unfortunate, 21" is my limited
and i think Fusion Drive can solve it or not?
how can i change display card with a iMac?
Please help me.

Hello Vincent,
You can't change the Video card in the 21" iMac at all, & on the 27" you can only opt for a better Video at time of ordering.
Fusion drive will overcome muxh of the 7200 RPM requirement.
For CS6 Photoshop...
Mac OS
Multicore Intel processor (64-bit processors only)
Mac OS X v10.6.8 or v10.7 (64-bit application only)
1GB of RAM
2GB of available hard-disk space for the files; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024x768 display (1280x800 recommended) with qualified hardware-accelerated OpenGL graphics card, 16-bit color, and minimum 512MB of VRAM (Recommended - 1 GB)
DVD-ROM drive
http://forums.adobe.com/message/4222772
Other Adobe Apps may have different requirements, but PShop should do OK...
http://prodesigntools.com/products/adobe-cs6-system-requirements.html
If getting the 21.5", I'd recommend the 16 GB RAM upgrade at order time, you cannot upgrade ot later.
Looks like AutoCad 2013 will work on it...
System Requirements for AutoCAD 2013 for Mac
Apple® Mac OS® X v10.8.0 or later (Mountain Lion), OS X v10.7.2 or later (Lion), or OS X v10.6.8 or later (Snow Leopard) with 64-bit Intel processor
Apple® Mac® Pro 4.1 or later; MacBook® Pro 5.1 or later (MacBook Pro 6.1 or later recommended); iMac® 8.1 or later (iMac 11.1 or later recommended); Mac® mini 3.1 or later (Mac mini 4.1 or later recommended); MacBook Air® 2.1 or later; MacBook® 5.1 or later (MacBook 7.1 or later recommended)
3 GB of RAM (4 GB recommended)
2.5 GB free disk space for download and installation (3 GB recommended)
All graphics cards on supported hardware
1,280 x 800 display with true color (1,600 x 1,200 recommended)
All Mac OS X supported language operating systems
Apple® Mouse, Apple Magic Mouse, Magic Trackpad, MacBook® Pro trackpad, or Microsoft-compliant mouse.
Mac OS X-compliant printer
Additional Requirements for 3D Modeling (All Configurations)
Pentium 4 or Athlon processor, 3 GHz or greater or Intel or AMD dual-core processor, 2 GHz or greater
4 GB RAM or more
6 GB hard disk space available in addition to free space required for installation
1,280 x 1,024 true color video display adapter 128 MB or greater, Pixel Shader 3.0 or greater, Microsoft® Direct3D®-capable workstation-class graphics card
http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=15412189&linkID =9240617

Adobe indesign and retina display incompatible?

The type in my Indesign documents look fuzzy. Did some searching and found out that Indesign is not yet upgraded to meet the needs of retina display. Does anyone know if I buy a external monitor, would that solve the problem temporarily? Also, does anyone know if Adobe has plans to update Indesign, I did read they were on top of photoshop and illustrator, but nothing about indesign.

Yes, if you buy and external monitor it will be normal. Adobe just brought retina support to CS6 Photoshop and Illustrator but I have no idea when it's coming to Indesign. You'd think that would be a big priority as well.

Find filter problem with Adobe CS6 and Mavericks

Hi to all!
I've 2 new MacPro with OSX 10.9 (is no possible to downgrade) with Adobe Illustrator CS6 and all software are full updated at the last version.
Firs of all I've found a problem after a last firmware update of my 2 MacPro, in samba connection, solved by AFP implement; in detail:
I've a Qnap storage with samba and afp shares, so when I connect the samba share the search function in finder not find any, but if I connect the same share via AFP protocol, all works good.
Ok, it's a problem but no so bad for me because I've the possibility to use AFP ;-)
Ok, now the big problem:
when I use the CS5 Illustrator and I execute the "insert" command, the search window show blank screen in the search area if I select a qnap sared folder (AFP or SAMBA shared get the same result, 0 element found)
After many and many tests I've solved with a workaround: I've forced the Finder to index the shared folder (from the command line in the console) and in this case I've no more problem...
The problem affect only the afp and samba share, with the local folder (volumes) I don't have any problem.
So, I can't downgrade Maveriks, and I'm sure the problem is not of CS6... then my only solution is to wait a future update of Mavericks?! or anyone can suggest me a solution?
Thank you for any reply.
Paolo

Go here to check out compatibility:
http://roaringapps.com/apps?index=a
As for Photoshop CS6 itself, I have no issues running
it on Mavericks on my 2011 Mini Server.
Also, before upgrading, make sure any drivers for third
party hardware are up to date and compatible with Mavericks.

How do I uninstall adobe cs6 and re install it

I had to wipe my mac's hard drive. When I went to put CS6 back onto my computer I dragged it from my external hard drive. Now every time I try to open one of the programs I am being told to uninstall it and reinstall it via error 16
When I went to try and find the uninstaller it doesn't show up on my utilities. Is there a way I can reinstall it onto my computer. I do not have the original external hard drive with me as i am out of the country and I do not have the download. Is there a way I can get the download again since I only have the software on one computer?

Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud - use it to uninstall CS6
http://www.adobe.com/support/contact/cscleanertool.html
You can download CS6 applications/suites thru the following page:
Download CS6 products

Macbook Pro early 2011, Adobe CS6 and open gl 2.0

Hi,
I would like to upgrade to adobe cs6 on my MBP early 2011 (lion). One of the requirements is "OpenGL 2.0–capable system". How do I check for this? If I'm running CS 5.5 should I be fine to upgrade?
Any help would be appreciated.

You can easily go ahead and upgrade
Lion has OpenGL 3.2.

Managing fonts in Adobe CS6 and Windows 7

Previously I had students add their fonts to C:\Program Files\Common Files\Adobe\Fonts. This worked well. I gave them write access to this folder and they would drag their fonts into this folder and they would be available to all products from the Creative Suite. This was when our school was on CS5.5 and Windows XP.
Over the weekend we reimaged the machines to have Windows 7 (64-bit) and CS6. Students can no longer add fonts to Adobe, as I am unsure of where the fonts folder is. They also cannot add fonts system wide, as they are not given admin access to these folders (which makes sense). I have tried to add fonts to the folder found at "C:\Program Files (x86)\Common Files\Adobe\Fonts" but this does not make the font available to Adobe CS6 applications.
Is there a way to have fonts added to Adobe? I know that there are manny different applications that can manage fonts; can the Adobe forum users recommend one? I don't want students to be able to affect system wide fonts. I have dealt with the repercussions of giving students access to the Windows fonts folder.
Help in this would be greatly appreciated!
Thanks,
Blake

I have been hodling off upgrading to CS4 for a year now, since Adobe has not make any statements about Windows 7 support. If adobe has release some statements, can someone point me to the statement?
http://www.adobe.com/products/creativesuite/faq/ See "Support for Windows 7"
What is the possible release schedule for CS5, I am thinking May 2010?
That's as good as anyone else's guess.
CS: Sep 2003
CS2: April 2005 (19 months)
CS3: April 2007 (24 months)
CS4: Oct 2008 (19 months)
CS5: May 2010 would be 19 months - but only Adobe knows the real date.

Adobe CS6 and m4a files

Adobe CS6 opens and edits m4a files on my Mac like a champ. When I try to do the same on my PC, all kinds of error screens. What gives?
Any simple solutions?
Thank you.

I don't know what the exactly correct answer is (there may not be one), but this is all going to be down to codecs on the PC version. M4a is something that Macs handle inherently, and the codec for turning them into wav files and back again (this is the only file type that Audition handles) is part of Core Audio. Same does not apply to PCs, unfortunately. I think that the provision has been improved in CC, but it has also been suggested that unfortunately, the best way of handling this is to use an external converter...
Try Super - link at bottom of this page: http://www.erightsoft.com/S6Kg1.html

Adobe CS6 and SSD

Can I install Adobe CS6 on SSD drive? And how to configure it for normal operation? To become much more productive system? Or better is needed for disk cache? (for Premier Pro and After Effects). Where you can read about it? Thanks in advance.

Just to add to Mylenium's response you will want to also make sure you have a sufficiently large SSD to hold your OS and your installed applications. A common question which seems to come up is where users are trying to install the apps on a standard drive due to having insufficient space on the SSD. This eliminates almost any performance gain which could be obtained from the use of the SSD.

Adobe CS6 and OX compatibility

I am having problems with Fonts in In Design CS6 and Photoshop 6 (only programs I've tried after upgrading from CS5). It was suggested I make sure my Font Book is upgraded. I have OX 10.6.8 and font book 2.2.2 (163.2). According to my Update Software, I am up to date. I tried to upgrade to OS X 10.8.3 but it says I need 10.8 and I don't see that. What's the story? I'm confused!

Post on the Adobe forums since it's their software you're having issues with: http://www.adobeforums.com

Adobe CS6 and MacBook Air

Would Adobe Cs6 work with Macbook air, Would Adobe Cs6 work with the Macbook air I just bought last week with Mountain Lion OS?

Yes, take a look at this link, http://www.adobe.com/products/photoshop/tech-specs.html

Adobe CS6 and Retina iMac

Similar Messages

Maybe you are looking for