Adobe CS6 Project will not load

Project will stick on loading screen. Yesterday morning the project ballooned in file size. I have auto saves that go from 625MB to 1.17GB. It is just the one project other projects open fine. Since I worked on it a long time yesterday I don't have any auto save backups that are smaller. I noticed two days ago it was around 250MB, but everything have been running great, it just won't open today.

Hi backfocusPRO,
Welcome to the forums.
Please try to create a new project and try importing the od into this new one. You can also try importing just your main sequence and check.
Regards,
Vinay

Similar Messages

Adobe flash player will not load and run. Uninstalled and reinstalled with no change.

Adobe flash player will not load. Uninstalled and reinstalled with no change.

Adobe’s advice regarding Flash Player 13:
http://forums.adobe.com/message/6288659

Adobe Flash update will not load WHY!!!!!!!!

I can't play anything requiring an Adobe Flash upgrade. Because I can't load the Adobe Flash Upgrade it works fine on my Explorer web browser but it will not load on firefox and it tells me to turn off firefox. I just sent in $30 dollars as a supporter of FireFox. Not that that matters. But what is the problem I can't be the only one with this problem. Is there some sort of pissing match going on with Adobe and Mozilla?

There are 2 versions of Adobe Flash:
*an '''ActiveX version''' for IE only
*a '''Plugin version''' for most other browsers including Firefox
*On a Windows system, you should always update both individually.
'''''You do not appear to have the Plugin version for Firefox installed. ''''' If you did, in Add-ons > Plugins you would see "Shockwave Flash ''(version)''". If "Shockwave Flash" is there and is disabled, click the "Enable" button.
Check your Plugins often --> http://www.mozilla.org/en-US/plugincheck/
*only the most popular/used Plugins are known by this page
*page will detect only installed, '''''enabled''''' Plugins
'''Install or update Adobe Flash''' 
#'''Using Firefox''', go to the following link and SAVE the download to your desktop so you can find it later. Un-check any items on that page that you do not want to download (i.e., "McAfee Security Scan Plus":
#*http://get.adobe.com/flashplayer
#When the download is finished, close Firefox (File > Exit '''''OR''''' Firefox button > Exit)
#Click or double-click on the file you just saved to your desktop
#*In the installation window that appears, click the box to the left of "I have read and...." to place a check mark in the box
#*The "Install" button in the lower right corner will now be highlighted, click it.
#*The installation is quick.
#Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
#To update/install the ActiveX version for IE '''''only''''', repeat the process, '''but use IE to go to the above website'''.
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''

Project Will Not Load. Recovery Possible?

Hi,
4.1. I had a backup power supply failure and a project was open. I re-started the computer and the project loaded, but as a 'Copy Of My Project' with a disclaimer. Still, it looked fine, rendered fine, and saved fine.
However, when I closed Premiere and then re-loaded the project later, it will not load. The project gets to 100% and then just sits there forever.
Any ideas on how/if the the thing can be recovered properly?
Thanks,
---JC

Try creating a new project and importing the busted project into it. Using your preferred import method, just navigate to the .prproj file and select it for import. If all goes well, the sequences and all relevant media will come into the new project and be stored in a bin with the same name as the project. Open it up and find your sequences there.
Alternatively, check out the Auto-Save folder in the root of your project folder. As long as you have Auto-save enabled, you should find a series of backup/archive projects in it. While you may lose a bit of work depending on the time of the last save, you should at least be able to salvage the project. Just check the Date Modified column for the last auto-saved file.

Adobe Elements 6 will not load

Several times I have installed, then uninstalled this program for the same reason, namely, it will not load. For a few times after the reinstall, it works okay, then stops. I have gone into "Services" and restarted the "active file monitor" but it doesn't help.
What do you suggest?

Are you able to launch PSE-Welcome screen?
+ Ripple (VJ)

New edition of adobe flash player will not load on samsung tablet. how do i load an older version?

newest edition of adobe flash player will not install on samsung tablet. how do i download an older version like 10.3?

This might help - How do I manually install Flash Player on my Android device?

Photoshop CS6 Extensions Will Not Load

I'm running PS CS6 Extended. Any item I select via Window>Extensions (e.g. Mini-Bridge, Adobe Exchange, etc.) results in a dialog box stating, "Cannot complete command because the extension could not be loaded."
Similarly, selecting File>Browse in Mini Bridge... yields the same dialog box.
Perhaps related to this is selecting File>Browse in Bridge which yields a dialog box stating, "Could not complete the Browse in Bridge command because Photoshop was unable to find the JavaScript plug-in."
I'm guessing that a necessary file and/or plug-in was corrupted or deleted, but this is beyond my knowledge level.
Any suggestions? Thanks.

You might try re-installing..
Benjamin

Project will not load Premiere CS5

Ive been working on my senior class video yearbook all year and now the project has over 400 files and now i cant work on it. It will pass the load process but once the sequence and everything comes on, it begins to load all the separate files and never makes it to "all files loaded" because it stops responding. I've tried everything, any suggestions? Is there anyway to open a project while having all files offline so i can at least move some stuff around and maybe split it into 2 project files?
Please help my yearbook is reaching deadline and i don't want to disappoint my class!

Here is the FAQ Entry from the PrPro-Wiki on Corrupt Projects. Hope that something helps.
Good luck,
Hunt

AE Project will not load

I'm having problems loading my After Effects project that I just worked on and saved. All the files are in the same location, but when I try to open the project, it just gives my a color wheel spinning(am using a new Mac with 12 GB RAM and Quad processors) and have to Force Quit the program (doesn't ever open it). I can often import a project, but I don't want to have to creating new projects and importing AE projects into them to simply modify what I was just working on - any suggestions?

As Ko said - drag the project to a local folder that is not part of a server or an external storage device. This is a known problem with some of the latest Leopard updates. There's a knowldge base article on it on the support pages, also.
Mylenium

Adobe Flash Games Will Not Load

I have updated Firefox to latest version 26.0...also updated Adobe flash to Version 12.0.7.148...also updated video drivers for Pc..also cleared cache...also updated windows xp to windows 7..also made sure all add on were enabled that are suppose to be...also have disabled hardware acceleration both in Firefox and shockwave settings..have uninstalled and reinstalled everything..also have ran malware bytes several times and runnning microsoft security essencials ..Also have tried running Firefox in safe mode.HOWEVER I still can not get adobe games to load. WHAT am i missing?
Operating System
    Windows 7 Ultimate 32-bit SP1
CPU
    Intel Pentium 4 630
    Prescott 90nm Technology
RAM
    4.00GB Dual-Channel DDR2 @ 266MHz (4-4-4-12)
Motherboard
    Dell Inc. 0KF623 (Microprocessor)
Graphics
    HP w1907 (1440x900@60Hz)
    Intel 82945G Express Chipset Family (Dell)
    Intel 82945G Express Chipset Family (Dell)
Storage
    465GB Seagate ST500DM002-1BC142 ATA Device (SATA)    33 °C
Optical Drives
    TSSTcorp CDRWDVD TS-H492C ATA Device
Audio
    High Definition Audio Device

Mike,
Thanks for the reply. I just worded that wrong i do have adobe flash player latest version installed as well clicked your link to double check. I have been going at this for 5 hours a day for a week now still no improvement. Also let me add i cant even watch youtube videos via FF or IE or opera..however I can with chrome....also with chrome i can play flash games however there real slow and choppy even with all updates and hardware acceleration clicked off. this is why im trying to switch from chrome..any more suggestions? thanks
P.s. ive even tried last resort and unistalled flash and tried some archived version still no imporvement... now back with latest version

Existing project will not load

When I click on an existing prject file or attempt to open through "open" in DVD Studio pro, the file begins to open and hets hung up on loading the menu on the status bar.
Help!

It may have gotten corrupted, try deleting the PAR/MPEG files sometimes that will clear up the haang, though I just had a DVD SP 3 project that went south, and nothing worked, but somehow DVD SP 4 was able to open it.

Upgraded to Yosemite (10.10.1) my Adobe Illustrator CS5 will not load.

When I open my CS5 it says "to open 'Adobe Illustrator CS5' you need to install the legacy Java 6 runtime". Don't know what that means or how to find it and I've tried.
I'm somewhat compter saviez but this I cannot figure out.
Please help!

jl,
It is here:
http://support.apple.com/kb/DL1572
Some have found that the page may turn up blank to start with, so it may be necessary to reload the page.
Others have found that it may depend on browser. Specifically, a switch from Safari has solved it in one case.
Apart from that, I believe the right order/way is to update the OS, then reinstall the applications. Was that how you did it?

Help please. CS6 exchange panel will not load.

Hi,
I have Photoshop CS6 extended and for some reason my adobe exchange panel will not load. This only happened earlier today. I have been designing all week and never had a problem before this. I cannot load any of the panels in Photoshop. I have done everything possible and trust me I worked on a solution for over 5.5 hours searching reading, uninstalling re installing etc and no solution. I just keep getting this error message "Cannot complete command because the extension could not be loaded".
The version of Extension Manager is 6.0.7.6. I came back to edit this as I should have mentioned that I did disable my anti virus.
I would really appreciate any advice please.
Thank you in advance
Rosa
I have since discovered that the problem was the software onOne Perfect Photo Suite 8 which I had installed earlier today - so have contacted onOne for support. I ended up un-installing the program and Photoshop has returned back to normal.

Obviously my problem was with the onOne new Suite 8 plugin. I had Suite 7.5 as well as PhotoFrame 4.6 Professional Edition and Photo Tools installed, so after trying a few different things my last option which worked was as onOne suggested and that was removing the onOne panel completely from CS6 and re installing Suite 8 ticking the 3rd option in the installation process - leaving PhotoFrame and Photo Tools installed. I do have many panels in CS6 and to my delight after the installation of Suite 8, all the panels in my CS6 were operational and ready to go!
Obviously there was a clash with the Suite 7.5 and 8. Removing Suite 7 worked for me. Initially onOne advised not to uninstall the previous version and just tick the first option to keep both versions. Obviously there was a clash between the version panels.
Hope this helps.

CS6 upgrade suddenly will not load, telling me it is a trial version of CS6 Ext and I must register.

I upgraded from CS5 to CS6 for my IMac. I downloaded CS6 put in my serial number and it worked fine for a number of weeks. Suddenly, when I went to use it it said it was a trial version. I had to register it to use my CS6 I registered it and it worked, but only as a trial version of CS6 Extended. I do not want CS6 Extended. I deleted it from my hard drive and once again downloaded my upgrade of CS6 again with my serial number and it worked fine for a couple of weeks. Today, once again, it tells me it is a trial version and will not load unless I register the trial version. What the heck is going on? This is crazy. I simply want to use CS6, for which I paid. Help!
Frank Brault

There is a lot of this going around. Adobe is aware of problem and hope to get a fix soon. http://forums.adobe.com/thread/1114727?tstart=0

Tried to reinstall PS CS6 from download, will not load after download and install, need assistance

I tried to reinstall PS CS6 from download, will not load after download and install, need assistance.
Thank you.

Thanks for the suggestion - but I eventually tried again and was able to contact via "chat" to someone qualified to help. The problem was that in my existing "bridge" - preference was (I think by default) - checked to startup in background on Login. I did not realize this - because I don't think I set it that way in the first place (maybe I did a few years ago) - and I could not see anything in task manager to suggest that bridge was running an application or any process - but when I learned this - I was successful in installing PS CS6.
Yes, I'm still not on solid ground re: whether or not I want to change from "owning" the tool or renting it -- what concerns me is that is sounds like regardless of users wishes, Adobe is headed in this direction and will eventually make it financially more feasible to go that route. At the moment I think they are "asking" for everyone to get on their bandwagon, but who knows. They have a powerful set of tools, that they continue to support and advance - and along with those development and support costs, they also would like to make a profit - so I understand if their past marketing model is no longer sufficient.
Thanks again.
John

Adobe CS6 Project will not load

Similar Messages

Maybe you are looking for