Adobe digital will not recognise my e reader

Adobe digital works fine on laptop, but will not recognise my e reader i.e. I cannot transfer books to it although digital is authorised for any device.  I have contacted e reader maker (Bookeen) with no resolve.  About to throw both items through window.  Help needed.

You're not the first to mix up Adobe Reader and Adobe Digital Editions, but they are different things, and you need a different crew to help you. Please try http://forums.adobe.com/community/adobe_digital_editions and good luck!

Similar Messages

  • Adobe digital does not recognise my Kobo e-reader following update.  Tried factory reset of Kobo and re-installing adobe.  Any suggestions please?

    Adobe digital does not recognise my Kobo e-reader following update.  Tried factory reset of Kobo and re-installing Adobe.  Any suggestions please?

    The lack of response is deafening. Im guessing then that Firefoix has serious issues then?..well it'll be there loss if more, like me, opt for Internet Explorer and Google Chrome (both these browsers work fine with the latest Flash Player installed)

  • My Adobe Digital Editions will Not recognise my EZ601Ebook EZReader

    I was given an ebook as a gift. I found that i can down load books from calibre however when i purchase a book i can get it to appear in ADE but ADE will not recognise my ebook. I am going crazy trying to sort this out. Adobe have been no help what so ever other sites want you to pay for your answer. I have both ADE and Sony Library on my PC.
    Any suggestions would be appreciated.
    allison

    Not an expert, but a suggestion/question. Did you plug in the ereader first, then open ADE? Apparently, ADe
    automatically finds the device and then asks you to register. Didn't happen for me though! But since yours is a supposedly compatible devi
    ce (see here:
    http://blogs.adobe.com/digitalpublishing/supported-devices) it should work.

  • Adobe 11 will not read my files.

    I have downloaded Adobe 11 several times, with and without the anti-virus set, and though it recognises my files Microsoft reports it had 'encountered a problem and is closing it down' when I try to open them.  When I restore the system to Adobe 9 it opens my old files but, obviously, not those in '11' format.  Any ideas?

    Well, it's like this.  Someone sends me some printed  information.  A bill.
    A report ,  It downloads.  I try  to open it and it tells me I need Adobe
    Reader 11 to do so and gives me a  link.  .  I download from the link.  It
    takes an age but in the  end it tells me I have successfully downloaded Adobe
    Reader 11. When I try to  open the file Microsoft tells me they have
    encountered a problem and are closing  it down.  When I try to open any of my
    saved Adobe Reader files I then  get the same message.  I have to use System
    Restore to get the facility of  Adobe Reader 9  back.  Then it opens my saved
    files again.
    In a message dated 04/11/2012 02:36:32 GMT Standard Time, 
    [email protected] writes:
    Re:  Adobe 11 will not read my files.
    created by Pat Willener (http://forums.adobe.com/people/pwillener)  in 
    Adobe Reader - View the full  discussion
    (http://forums.adobe.com/message/4821557#4821557)

  • Adobe flash player will not recognise my apple password? Can any one hel?

    adobe flash player will not recognise my apple password.

    OS X 10.7 Lion, 10.8 Mountain Lion, 10.9 Mavericks and 10.10 Yosemite
    Reset Password
    Start the computer,then press and hold down command and R keys to start into recovery partition.
    When you see the Apple logo, release the keys.
    Wait until  OS X Utilities window shows up.
    Move the mouse pointer to the menubar at the top and click "Utilities", then select "Terminal"
    from the drop down.
    Terminal window will appear.
    Type in   resetpassword   and press enter on the keyboard.
    Leave the Terminal window open.
    Reset Password Utility window will open with Macintosh HD selected.
    Select the user account from the popup menu box under “Select user account”.
    Enter a new password.
    Reenter the new password for the user.
    Enter a hint.
    Click the "Save" button.
    Click  in the menubar and select Restart.
    Log in.
    If Keychain dialog box appears, select “Create New Keychain”.

  • HELP!!!! Adobe will not recognise my serial number - trying to upgrade from LR4 to LR5

    Help... I purchased Adobe Lightroom 4 in January 2013 via Amazon. I am now trying up upgrade to Lightroom 5 (via the Adobe site), and it will not recognise my serial number.  Has anyone experienced this before?  I do not want to buy into the Cloud scheme, so happy to pay the upgrade for my LR.  I have all payment details from Amazon.
    Any assistance would be greatly appreciated.  Thank you.

    Hello,
    I am in the installation section.  There are 3 options on page:
    1) I have a serial number and want to license Lightroom
    2) need a serial umber?  Buy - using your web browser
    3) 30 day trial
    I assumed that because I already had a serial number from my LR4 purchase, I select the first option, go from there and pay for the upgrade.  When I select that, it takes me to another page where I need to enter a serial number.  This is where I am getting stuck.

  • I have my serial number but Adobe will not recognise it ... what can I do ?

    My computer crashed yesterday and I need to reinstal Adobe ... previous installation was on XP but I have had to instal Windows 8 to get my PC to work again ... I purchased Adobe with pre paid card on 9 June 2015 in Sydney ... the software worked fine until yesterday's crash ... now when the Adobe system will not accept the 20 digit serial number for my product ... I cannot afford to spend another AUD700 buying this product again after just 4 months using it ... how can I convince Adobe to accept this same serial number that I used just 4 months ago on the same machine ?

    Is it by any chance talking about a QUALIFYING serial?

  • Desktop CC app will not recognise Adobe ID

    My Desktop Creative Cloud app will not recognise my Adobe ID. I continusly get the message "unknown server error". As a result I can't use the updater which currently shows 3 to the right of the Adobe icon. This has been a problem for more than a month. I have asked this question on two other ocassions with no success. Can someone please help. I am currently using Mac OS 10.8.4

    Hi RolandoIV,
    Kindly follow the steps in the mentioned kb and let us know whether it worked: http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html .
    Regards,
    Romit Sinha

  • My MacAir will not recognise anything inserted into USB port. They work on iMac and I have tried inserting slowly and have set preferences to read "Read only"

    My Mac air running OS X 10.9.3 will not recognise anything in USB ports, even thought they are fine on iMac computer and it has happily read them up until today. I have tried inserting slowly and checked preferences to accept Read only devices. Any ideas?

    Reset PRAM:   http://support.apple.com/kb/PH14222
      Reset SMC.     http://support.apple.com/kb/HT3964
      Choose the appropriate method.
      "Resetting SMC on portables with a battery you should not remove on your own".

  • How do i get adobe digital editions to recognise my ereader

    how do i get adobe digital editions to recognise my ereader

    What kind of eReader is it?
    Some are not supported/recognized at all.
    There are quite a few eReaders that will work with ADE 1.7.2 but not with the current ADE 2.0.1.
    Adobe do not appear to have run any product tests on ADE 2.0/2.0.1.
    ~~~~~~~~~
    There are lots of bugs in ADE2.0 (and 2.0.1).  Try replacing ADE2.0 with the older but more reliable v1.7.2.
    (You can have them both installed at once if you like.)
    Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
    http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
    The forum software is sometimes corrupting the link above.  There shouldn't be a blank in 'editio ns.html'.  The following redirects to the same page: http://tinyurl.com/diged172
    Some people have found ADE trying to upgrade automatically. 
    It appears (not 100% sure) that if you install ADE2.0 as a new install (not as an upgrade) that your 1.7.2 will continue to run.
    Probably best to say no if 2.0.x installation asks if you want to migrate your library.

  • My macbook will not recognise USB devices, Help!

    My macbook pro with OS Yosemite will not recognise USB devices such as tom toms, digital voice recorders or cameras.  I find this frustrating as I can not update or download to my macbook.  Any ideas on what I can do? 

    Have you checked the settings in FINDER PREFERENCES?
    Have you checked with the respective vendors to determine compatibility with your MBP?
    Ciao.

  • I am upgrading to acrobatproXI but it will not recognise my password. I have been onto the site and verified my password.

    I am upgrading to acrobatproXI but it will not recognise my password. I have been onto Adobe.com and verified my password.

    The password to activate Acrobat.
    I am not aware of another.
    The dialogue box comes up as 'acrobatpro11_dlm wants to make changes. type your password to allow this change' and then the Name which enters automatically is 'APPLE' then it asks for my Password.
    I have tried my apple password as well.

  • Why does adobe digital editions not recognize my nook?

    Why would adobe digital editions not recognize my nook when I connect the nook through the usb port?

    Thanks for the quick reply, and sorry for the late response. I'm trying to do this for my mum on her computer, but I don't live with her, so it can be hard for me to find the spare time to get to her place.
    Okay, let me start by listing a few things in dot points:
    - Adobe Digital Editions does not recognise the device. There doesn't even appear to be any menu options for a "device" anywhere in the program.
    - When I connect the device to the computer, the screen lights up and the word "USB" appears on it, so it is definitely noting the PC connection. However, no device appears in "My Computer" (running Windows XP). Tried using "Add Devices", but it couldn't find anything.
    - Yellowstone, the brand, appears to be a product of JB Hifi, the store she purchased it from, and has no website or online software/drivers.
    - I downloaded Calibre as you said. It seems a lot cheaper, but has easier to read options. However, it still won't let me load to my device (the text is greyed-out). I assume this means the program is not recognising the device either.
    Not sure what to do now, kinda run out of ideas. Any more help would be greatly appreciated.
    Thakns Linda.

  • I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!

    I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!

    What happens when the iPod is plugged in?  anything?  any errors?
    Why is 50GB of music gone?  All music should exist on the computer.  Only a fool would rely on a single device which could easily be lost or stolen to store their content on.

  • Adobe Bridge will not show items in subfolder even when this option is checked.

    Adobe Bridge will not show items in subfolder even when this option is checked. It works on one computer but not the other-both working on the same system/ version of adobe cc.
    How can I fix this bug?

    Check to see what is different between setups.  You may want to reset prefences in the balky computer.

Maybe you are looking for

  • Can't get past 10%

    Hello, I am trying to get up and running with ThinApp Factory, but cannot get it to virtualize one single application. For example, I am trying to thinapp an older version of Firefox (3.6). When I go through the motions of creating the package, the p

  • DVI ports too close together

    HI, I tried to connect a second display to my Mac Pro (early 2008) last night and it seems that the DVI ports are too close together and I am unable to fit a second DVI cable in the open port. It's very odd, the 2 ports are shifted to the right and n

  • VersioningError when Using JDBC driver for SQL Server with RMI

    Hi, I wrote a simple class for inserting rows into a database. The database is SQL Server 2000, and I am using weblogic's mssqlserver4 driver. The class works fine, but when I try to export the class as a remote object (using Sun's RMI implementation

  • Debugging a remote tomcat servlet

    I have the following setup: win2000sp2advanced server with an application (Interwoven TeamSite) running a scaled down version of Tomcat 3. This tomcat is serving a war called webdesk.war. Runtime, the war file is unpacked in this location: c:\iw-home

  • Hi how can I execute a getQueryHitCount() on getbindings

    Hi I need additional functionality over an executable, like the following. public String but_nav_ultimo_action() { but_nav_ultimo1.setDisabled(true); BindingContainer bindings = getBindings(); OperationBinding operationBinding = bindings.getOperation