Adobe DNGConverter 8.1 is showing multiple time as a device

Adobe DNGConverter 8.1 is showing multiple time as a device on my iMac running OSX 10.9. Today it shows 18 times. I have not launched any Adobe software today.

I am Windows, so I have ZERO information on how you tell a Mac not to load software automatically

Similar Messages

Fiori web service GetEntity single record show multiple times

Hi Guys
I have created Purchase Order GetEntity Web Service. In single Purchase order there are multiple Products. I have show that products in Line Item.
In that line item a single records show multiple times.
From Netweaver Geteway GetEntity service. I got data in below format.
    "d":
        "results":[
                "__metadata":
                    "id":"http://<IP><PORT>/sap/opu/odata/sap/ZHR_VF_RCV_SRV/PurchaseOrderItems('4500000215')",
                    "uri":"http://<IP><PORT>/sap/opu/odata/sap/ZHR_VF_RCV_SRV/PurchaseOrderItems('4500000215')",
                    "type":"ZHR_VF_RCV_SRV.PurchaseOrderItems",
                    "properties":{
                        "PurchaseOrderHeader":{
                            "associationuri":"http://<IP><PORT>/sap/opu/odata/sap/ZHR_VF_RCV_SRV/PurchaseOrderItems('4500000215')/$links/PurchaseOrderHeader"
                "PoNumber":"4500000215",
                "PoItem":"00010",
                "PurMat":"H12",
                "ShortText":"Trading Good,Reorder Point,Reg.Tr.",
                "Unit":"EA",
                "DispQuan":"20.000",
                "PurchaseOrderHeader":{
                    "__deferred":{
                        "uri":"http://<IP><PORT>/sap/opu/odata/sap/ZHR_VF_RCV_SRV/PurchaseOrderItems('4500000215')/PurchaseOrderHeader"
                "__metadata":{
                    "id":"http://<IP><PORT>/sap/opu/odata/sap/ZHR_VF_RCV_SRV/PurchaseOrderItems('4500000215')",
                    "uri":"http://<IP><PORT>/sap/opu/odata/sap/ZHR_VF_RCV_SRV/PurchaseOrderItems('4500000215')",
                    "type":"ZHR_VF_RCV_SRV.PurchaseOrderItems",
                    "properties":{"PurchaseOrderHeader":{
                            "associationuri":"http://<IP><PORT>/sap/opu/odata/sap/ZHR_VF_RCV_SRV/PurchaseOrderItems('4500000215')/$links/PurchaseOrderHeader"
                "PoNumber":"4500000215",
                "PoItem":"00020",
                "PurMat":"H11",
                "ShortText":"Trading Good,PD,Reg.Trading",
                "Unit":"EA",
                "DispQuan":"20.000",
                "PurchaseOrderHeader":{
                    "__deferred":{
                        "uri":"http://<IP><PORT>/sap/opu/odata/sap/ZHR_VF_RCV_SRV/PurchaseOrderItems('4500000215')/PurchaseOrderHeader"
                "__metadata":{
                    "id":"http://<IP><PORT>/sap/opu/odata/sap/ZHR_VF_RCV_SRV/PurchaseOrderItems('4500000215')",
                    "uri":"http://<IP><PORT>/sap/opu/odata/sap/ZHR_VF_RCV_SRV/PurchaseOrderItems('4500000215')",
                    "type":"ZHR_VF_RCV_SRV.PurchaseOrderItems",
                    "properties":{
                        "PurchaseOrderHeader":{
                            "associationuri":"http://<IP><PORT>/sap/opu/odata/sap/ZHR_VF_RCV_SRV/PurchaseOrderItems('4500000215')/$links/PurchaseOrderHeader"
                "PoNumber":"4500000215",
                "PoItem":"00030",
                "PurMat":"H21",
                "ShortText":"Trading Good,Reorder Point,Batch-FIFO",
                "Unit":"EA",
                "DispQuan":"30.000",
                "PurchaseOrderHeader":{
                    "__deferred":{
                        "uri":"http://<IP><PORT>/sap/opu/odata/sap/ZHR_VF_RCV_SRV/PurchaseOrderItems('4500000215')/PurchaseOrderHeader"
any one please help me on that.
Regards
Pankaj Kamble
[Removed by Moderator]
Message was edited by: Michael Appleby

Hi RW
I have created NW web sevice used 'SEGW'. In that web service there are two Methods (PurchaseOrders & PurchaseOrderItems ) with   two different BAPI.
In both BAPI   "PoNumber"   is common & Primary Key.
so please guide me. where should i set my key.
Regards
Pankaj Kamble

Lines are showing multiple times on Invoice Report

Hi,
If Payment Terms are Installments then lines are showing multiple times on Invoice Report.
Suppose Payment Terms are 10 Installments then (Item, Description, Qty, Unit Price and Extended price) lines are showing 10 times.But I need to display only one time line data (Item, Description, Qty, Unit Price and Extended price).
Please help me to achieve this.
Thanks,
Subbarao.

Hi,
Thank you very much for your reply.
I used following ways:
1) <?xdosxlt:distinct_values(LINE_NUMBER)?>
2) <?if:position()=1?><?LINE_NUMBER?><?end if?>
But no luck to achieve the requirement.
I too thought like your Idea (like displaying multiple) but client wants me to display the only one line data.
Thanks,
Subbarao.

IMac shows multiple times on my Apple TV after installing Yosemite.

After upgrading to Yosemite my IMac show multiple time on my Apple TV.

Weird. Restart everything including your router.

A single photo in Aperture smart album shows multiple times on Apple TV2.

Sometimes a random photo in my Aperture smart albums displays on my ATV2 multiple times..can I fix this? For example, currently a single picture shows up on the Apple TV in the photos taken "in the past week" smart album 124 times, and the same picture shows up in the "in the past month" smart album 15 times.
When I double check the picture in the original smart album on the computer, it appears correctly, i.e. only one time.
Suggestions?

I'm having the same problem. I deleted all the photos in the photostream then tried to drag a couple new ones in to see if they'd synch. Nothing is happening. I recently installed aperture (have about 125 gb in the library). If anyone has an idea what to do, i'm open to try something.

Element showing Multiple times in SOE.

Hi,
I have added one element called 'Basic' one time only in element Entries. But it is showing 2 times in SOE report and Run Results also.
How to remove that. Pl. help.
Thanks in advance.

The Element was processed multiple times in the Payroll run and hence you can see the element twice in the Run Results. The possible reasons could be
1. Element was prorated.
How to check : Check whether the Start Date and End Date were populated in the run results screen for the two entries of the element.
2. Multiple Element entries were created for the Element which is ruled out as you confirmed that there are no multiple element entries.
3. Run results were triggered due to Indirect Results.
you need to fire some queries to find out this.
select * from pay_element_entries where element_entry_id in (select source_id from pay_run_results where run_result_id in (<id1>,<id2>) )
where id1 and id2 are run_result_ids of the two run result entries for the element.
Performing above checks should give you the reasons.
Regards,
Sharath

AssignedTo showing multiple times on report

I was tasked with creating some reports from Service Manager using the cubes. My boss wanted a report that showed all active tickets, showing from high to low the analyst, then the category, then the user.
I used the following Fields:
IncidentStatusValue in the Column Label
IncidentDimCount in the Values
AssignedToUserDim.DisplayName, IncidentClassificationValue, and AffectedUserDim.DisplayName in the Row Labels.
The report looks exactly as I want it to.
The problem is that the data is wrong on several levels.
Issue 1: It shows multiple entries for the AssignedToUserDim.DisplayName
I changed the names, but if I click on the number 1 next to Joe User(Affected User) for either Analyst1 or 2 a tab open with IR48005. Basically the two analyst both show an active ticket assigned to them, when only one of them should.
Issue 2: The Grand Total that is calculated by the PivotTable is incorrect. I copy and paste the same numbers into the cells next to the PivotTable and the total is something completely different.
The weird thing about this also is that when I did this 20 minutes ago before writing this post, the Autocalc showed 130.
The first issue is more important than the second issue. It is not just this report and I have tried using many different values only to get the same duplication. Its almost like the DataWarehouse is not actually deleting the previous AssignedTo
user. The history in the actual ticket shows that it should be, but the reports show something different.
This then throws off every report I try to make. I made one for totals tickets per analyst and I noticed that I got credit for closed tickets that I had previously reassigned, as did the person who the ticket was reassigned to.
Can anyone offer any suggestions?
Thanks.
Matt

Unfortunately no. But I think I found a pattern in regards to this: it seems the current assigned to user is always the one listed the last.
I guess this is because the stored procedure behind the AssignedToUserDim doesn't filter if the relationship is still active. This is quite easy to "reproduce" via PowerShell.
Lets say you have an IR with ID IR1234 which has been re-assigned multiple times.
If you run this small query now in PowerShell you'll see that all the AssignedToUser relationships still exists, but only one of them has the property "IsDeleted" set to False.
Import-Module SMlets
$IRO = Get-SCSMObject -Class (Get-SCSMClass System.WorkItem.Incident$) -Filter "Id -eq IR1234"
Get-SCSMRelationshipObject -BySource $IRO | where {$_.RelationshipID -eq "15e577a3-6bf9-6713-4eac-ba5a5b7c4722"}
So, in the DB those AssignedToUser relationships (actually it applies to all relationships) won't be "overwritten" or the old one deleted as soon as you re-assign an incident for example. Instead, new relationshipobjects will be generated and the old ones
changes the "IsDeleted" attribute to True.
Perhaps it would be possible to create a new Dim for the Data Warehouse, re-use the stored procedure for the AssignedToUserDim and modify it slightly to filter only for the active AssignedToUser relationship. Then you could use your newly created dim to
display the current Assigned To User. I haven't tested this though, probably it's more complex than I assume :)
Cheers
Alex

Bridge issues: Bridge does not open. It can show multiple times in TaskBar but nothing to user

Issue 1 Bridge does not open. If you click on the application multiple times in trying to get it to load... it shows the app multiple times in the TASK BAR Manager.

Sounds like you may need to restart the computer Braswels.
Try that and see if it resolves the issue.

Printer shows up multiple times in my device list

I have an EA4500 router running firmware version 2.1.39.145204. A device, which I assume is my HP printer, shows up on my device list multiple times (11). This is illustrated below with the devices status report from the "Troubleshooting" tab of my Smart Wi-Fi interface. The device listed as "Photosmart Premium C309g-m" is indeed my printer. The MAC address listed agrees with the set-up information in my printer and it is correctly listed as connected via wi-fi. There is no hard wire connection from the printer to the network.. As you can see, there is a bunch of other devices listed all with the same name. These devices have the same IP address as my printer but different MAC addresses. My questions are:
1. What causes this situation?
2. How do I fix it? By this I mean, how do I remove the multiple listings?
Thank you in advance for your help.
Name MAC address IPv4 address Connection
PKs-iPad
FC:25:3F:9B:5B:66
192.168.1.118
Wireless
HP0026550FA2B0
DC:E0:00:00:B8:C5
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:000:20
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:10:9F
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:109
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:38:A5
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:20:74
192.168.1.128
LAN
Owner-PC
00:23:08:CC:F6:00
192.168.1.130
LAN
PETER-LAPTOP-WiFi
00:1D9:68:F2:E0
192.168.1.122
Wireless
David Cohen’s MacBook Pro
00:23:6C:92:CE:22
192.168.1.104
Wireless
Photosmart Premium C309g-m
00:26:55:0F:A2:B0
192.168.1.128
Wireless
HP0026550FA2B0
DC:E0:00:00:20:AA
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:000:B4
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:98:81
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:18:A9
192.168.1.128
LAN
Name MAC address IPv6 address Connection

Hi sgtpepperlhcb2! Duplicate MAC and IP addresses in the DHCP list can be an indication of a possible firmware problem. I suggest you upgrade the router's firmware. Reset and reconfigure the router if the firmware upgrade will not work.
Here's an article that may help.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=d2d5c9da8e68439883b85a9cf72bf7e5_How_to_upgrade_th...

IMac shows multiple times in Finder

I have an issue in the Finder.
I'm working on my iMac. It keeps showing my iMac multiple times, but I can't connect to any of them, and worst of all, I can't remove them.
Anyone had something like that, or knows how to resolve this?

Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Preferences/com.apple.finder.plist and com.apple.sidebarlists.plist. Move the .plists to your desktop.
Re-launch Finder by restarting and test. If it works okay, delete the plists from the desktop.
If the same, return the .plists to where you got it from, overwriting the newer ones.
Thanks to leonie for some information contained in this.
You might need to redo the View settings after an update.

PO Values showing multiple time in Report

Hello Expert,
We had one report called PO Status report it is fetching data from ME23N from ECC,when i am checking the report in BW the report PO showing multiple values for different different invoices which should not be the case it should be same,please help me to fix the issue.can i change something in reporting level
Thanks and Regards,
Jyoti

Hello All,
Thanks for the reply i had cheked by putting PO number and Invoice number next to next in the report but the total amount of the value is coming more than the line items in the Purchase order in ECC.I would like to give example of the issue like for X PO there are 3 line items and 5 invoices the total sum of the line items for the PO is for ex 3000 with 5 invoices.Expected results in BW is the sum of the line items=(PO Amount),but in report it is taking the invoices value and PO value for each invoices and adding all the invoices PO amount as in our case 15000 which is incorrect.Please help
Thanks and Regards,
Jyoti

Time Machine showing multiple times in finder

One of my clients is having an issue where throughout the week the time machine volume will slowly keep adding multiple copys of itself to his finder sidebar. It seems like it is not unmounting after a backup and will clutter the finder sidebar. A reboot removes them but they always come back.

Are those backups on a network?
If so, yes, that does happen on occasion. Exactly why it happens isn't clear, but It may be that while the volume is mounted by Time Machine to do a backup, the user enters the "Star Wars" display to look at the same set of backups, and somehow with both accessing it at the same time, the last process to use it doesn't realize it needs to be unmounted.
It may also be that the backups aren't finished indexing when the backup completes, so doesn't unmount them.
You might want to try repairing them, per #A5 in Time Machine - Troubleshooting.

Warning Log message showing multiple times during create/update registration

During registration the following error is getting repeated
Warning Sat Feb 14 15:38:15 CST 2015 1423949895405 /atg/dynamo/servlet/pipeline/RequestScopeManager/RequestScope-1266341/atg/userprofiling/ProfileFormHandler Using default setting for ProfileTools property
/atg/userprofiling/ProfileFormHandler Using default setting for ProfileTools property
This message shows up like a billion times in the logs. To be more specific, it shows up over 30,000 times in the past week.
Please let me know how to turn off this warning and We want logging turned on for INFO, WARN, and ERROR. Simply setting the logging level to hide the log isn't the fix we're looking for. Please let me know what is causing the log message to appear in ATG.
please guide me to find the solution.

In your ProfileFormHandler have you overriden the profileTools property ? It seems like the ProfileTools is resolving to Null and what is happening is that every time the request scope ProfileFormHandler is initializing it is finding the ProfileTools property as null so it throws that warning and initializes ProfileTools component with default setting.
So check if you have overriden the ProfileTools property or component itself or have changed its path which may be throwing error in logs during startup or component initialization and is causing it to be null, and if you haven't changed it then you can also try to put profileTools = /atg/userprofiling/ProfileTools in your code base ProfileFormHandler property file to explicitly resolve it which should also prevent that warning.

Album Showing Multiple Times

When I sort my music by album, I'm having this problem where I see an album more then once. One is the full album and usually the "second" album only has a few songs.
I had a support call and basically got told to delete the "incorrect" album.
I think I have now realized that songs in my playlist have created their own "album". When I delete the "incorrect" album it is deleting the song from the playlist(s) that it is in.
Why is this happening and how do I stop it?
Thanks!

this is interesting but you should see if you have multiple copies of the song. Right click on one of the songs from the "second album" and click "show in explorer" and then see if there are actually 2 albums. If this is so, you might just be importing some songs twice. Are the albums that have duplicate items from the iTunes store or not? My guess is no. Also, do you have the option to copy items added to your library to your iTunes folder or no? I would recommend that you do this, it avoids a messy library and might help with this.

Mail doesn't show attachments or shows multiple time of the same attachment

Dear All,
In our organisation we use Exchange 2007 with Roll-up 3-v2 and we have many members who use Mac Snow Leopard and Lion standart mail program.
When we send out emails with attachnemt those thins happen:
Items with several attachments appear to have the same attachment added several times, or to have only one attachment,no matter how many there actually are.
Attached images become embedded.
We checked the mails with a barrowed Mac (yeah yeah we are PC users)
The problem occur regardless of thedownload protocol used – POP3 or IMAP4
The same e-mail item viewed through the ISP’s web interface appears as expected – all attachments visible and thesignature graphic visible and accessible
Other non-default mail client such as Thinderbird works fine.
The same e-mail item sent from other ISPsappear as expected, with all attachments visible and accessible.
We dig out for information and and I found this https://discussions.apple.com/message/12897672?messageID=12897672
related with Snow Leopard. Many of Mac user has upgraded to Lion but the problem is still there.
We are currently testin Roll-up 4 for the Excange server but as it has been withdrown from WSUS we are very suspicious that will solve the issue.
We are despereate to find a solution in order to provide better service to our Mac user member and we need help.
Unfortunately switching the systems that we use is not an option for the moment.
Any thougt, any help highly appreciated.
Regards,
Selcuk Savas
RCPA Webmaster
[email protected]

Dear All,
In our organisation we use Exchange 2007 with Roll-up 3-v2 and we have many members who use Mac Snow Leopard and Lion standart mail program.
When we send out emails with attachnemt those thins happen:
Items with several attachments appear to have the same attachment added several times, or to have only one attachment,no matter how many there actually are.
Attached images become embedded.
We checked the mails with a barrowed Mac (yeah yeah we are PC users)
The problem occur regardless of thedownload protocol used – POP3 or IMAP4
The same e-mail item viewed through the ISP’s web interface appears as expected – all attachments visible and thesignature graphic visible and accessible
Other non-default mail client such as Thinderbird works fine.
The same e-mail item sent from other ISPsappear as expected, with all attachments visible and accessible.
We dig out for information and and I found this https://discussions.apple.com/message/12897672?messageID=12897672
related with Snow Leopard. Many of Mac user has upgraded to Lion but the problem is still there.
We are currently testin Roll-up 4 for the Excange server but as it has been withdrown from WSUS we are very suspicious that will solve the issue.
We are despereate to find a solution in order to provide better service to our Mac user member and we need help.
Unfortunately switching the systems that we use is not an option for the moment.
Any thougt, any help highly appreciated.
Regards,
Selcuk Savas
RCPA Webmaster
[email protected]

Adobe DNGConverter 8.1 is showing multiple time as a device

Similar Messages

Maybe you are looking for