Adobe doesn't see my stamps

I created a stamp in acrobat pro XI and put it in the stamp folder for acrobat pro X on another persons machine, which in the past has not been an issue. When I open a file in X it doesn't show up....any help here?

Make sure the stamp is in the correct folder. There are 2 stamp folders, a "user" folder and an "app" folder:
- the User folder contains custom stamps
- the App folder has Acrobat's built-in stamps
Your custom stamp has to be in the "user" folder. Type the following into the JavaScript console to find out the paths to these folders:
app.getPath ("app", "stamps");
app.getPath ("user", "stamps");
See this page for more information: http://acrobatusers.com/tutorials/dynamic_stamp_secrets

Similar Messages

Acrobat XI pro doesn't see my stamps

Q:) I created a dynamic stamp in XI pro and placed it in the stamp folder for acrobat pro X on a friends machine....when he opens acrobat and clicks on the stamp it doesn't show up...is there a way to make adobe re-check for new stamps?

Stamps don't appear in a Shared Review PDF

I created the XML file in Adobe Priemer Pro. Final Cut doesn't see this file. The file in the list not the active. Prompt please.

I created the XML file in Adobe Priemer Pro. Final Cut doesn't see this file. The file in the list not the active. Prompt please.

The XML format Premiere uses is not supported in FCPX. The only way I know of that may work is to go through FCP7 and then use 7toX to get to FCPX.

Vista: 1.3 Downloader Doesn't See Sony a700 .ARW's; Odd Mouse Behavior

On my Vista system,the LR 1.3 downloader (now "Adobe Photodownloader 3.0 Component") doesn't see Sony a700 .ARW's when I choose Camera Or Card Reader as the source. I don't know about a100 .ARW's. The downloader for 1.2 didn't recognize either. I can still import them in place once I have them downloaded using the Vista Photo Gallery.
A new problem is that when I scroll through a group of images using the mouse scroll wheel the library loupe preview updates as before but the thumbnail doesn't shift until the histogram appears. The left and right arrows work properly.
The device manager shows the mouse (a Gateway branded optical mouse) as a "HID-compliant mouse". No updates to the mouse appear to be available.

If I use the "Choose Files" and "Copy To A New Location" options I can import directly into LR. I prefer to just keep using the Photo Gallery downloader and then import in place until the LR downloader is fully compatible. The annoyance for me is that there is now a lag in changing the active photo on the film strip in Library Loupe view when using the scroll wheel.

MBP doesn't see shared/Bonjour printers

My MBP (10.5.1) doesn't see any shared printer connected to a different machine. The only "shared" printer it will display is "Adobe PDF 8." My 3 other Macs (also 10.5.1) see, and print to, my shared printer, so I'm 100% sure the problem resides on the MBP.
I can do all other kinds of sharing on my MBP, i.e., screen sharing, remote login, etc. It just won't see other printers. I'm thinking maybe a printer port is blocked or something, but if it is I don't know how to unblock it. The drivers for the remote printers are installed on my MBP.
Any ideas on how to fix this issue?

Harry,
Since I don't know what all you have tried, I don't know if you and I are seeing similar symptoms due to the same problem or not. I'm going to paste in the link to a thread that I started trying to solve a problem that I'm having. PAHU has been very helpful in making suggestions, and he has a recent one that I'll try when I get home this evening.
Here's the link: http://discussions.apple.com/thread.jspa?threadID=1284467&tstart=25

Skype for Windows doesn't see my Samsung WEP200 bl...

I paired a Samsung WEP200 bluetooth headset with the USB bluetooth adapter on my Dell Inspiron 6400 laptop running Windows XP Pro SP3 32 bit. When I select "Show Bluetooth Devices" from the Bluetooth dropdown menu, I see "Audio devices/WEP200/Passkey enabled" but Skype ver. 5.5.59.124 doesn't see the bluetooth headset at all, neither the "speaker" nor the "mic". Do I have any hope of getting it to work? TIA.

Out of curiosity, do you have any "mirror" driver installed - i.e., something like PC Anywhere or RAdmin or other package designed to allow someone else to control your user interface? These are known to get in the way sometimes.
There is a registry tweak to force Photoshop to use the OpenGL features of your video driver. It's for diagnostic use only, but it could serve as a workaround until you can get to the bottom of the driver problem (perhaps it will be solved in an upcoming release of the ATI drivers).
Some of the information in this thread might help you: http://forums.adobe.com/message/2954477
Note that the registry tweak is good for diagnostic purposes, and enabling GPU acceleration where Photoshop does not believe the driver can support it can lead to instability and crashes, with loss of data. It will be interesting to know whether the ATI mobility drivers can support proper OpenGL operation on your system.
-Noel

I purchased a License for Adobe Photoshop Elements 13 plus Adobe Premiere Elements 13 and Adobe doesn't recognize the License Key, Adode customer services aren't interested.

I purchased a License for Adobe Photoshop Elements 13 plus Adobe Premiere Elements 13 and Adobe doesn't recognize the License Key, Adobe customer services aren't interested, neither are Ebuyer.com.
Where do I go next? Credit card company to ask for a refund?

57dibbs
Has you contacted the seller through its Customer Service?
If that is the case and Customer Service has no idea of what you were given as a Product Key and how to use it, have you considered asking
your question in the seller's forum (PC software section)?
But, I have another idea for you to try first....are you involved in a student teacher purchase with prepaid card? If so, please click on the following link
http://helpx.adobe.com/x-productkb/global/find-serial-number-student-teacher.html#card-sub mit-product-code
and go to the section on "I received a prepaid card, and I need help". In that section go to "2" which is for
"Submitting my product code and proof of eligibility to Adobe". You will notice there is a link to click on that
is related to country. Make the appropriate choice and see if that solves the problem. You should see
Visit the page listed on the back of your prepaid card to submit your code and proof.
For customers inside North America, www.adobe.com/go/edu-validate
For customers outside North America, submit through your region's customer portal below:
Europe, Middle East, Africa | Germany | France | Spain | Italy | Netherlands | Czech Republic | Poland | Asia/Pacific | Korea
Verification can take anywhere from 2 to 30 days to validate.
If the above does not apply to you, then I would explore the seller forum for answers if you cannot get them from Adobe Chat or the seller's
Customer Service. Getting your money back from the seller should be tried as soon as possible if you find no solution.
Thank you.
ATR

Premiere Elements 3 doesn't see my DVD drives?

Hi
I have been using PE3 for a long time.
I just got a new computer running Windows 7 64 bit.
I thought that PE3 was working great until I got ready to write my production to DVD.
When I get to that point I get the "No DVD drive detected" message.
I have two DVD writers in my computer both are working normally.
I put a blank DVD in each of them but no matter what I do PE3 doesn't see them.
When I click on the drop down it is blank.
Anyone have any ideas how I can get Elements to see my drives?
If this fails, can I write the project to a folder (that seems to work OK) and then just copy the project to a DVD from there?
Any help welcome
Mike

Mike
Many considerations in your present situation, but for now I will leave you with a link to the free 30 day Premiere Elements 8.0 tryout from Adobe.
http://www.adobe.com/cfusion/tdrc/index.cfm?product=premiere_elements&loc=en_us
Top of the list for getting started on the right foot with version 8.0
a. Download and install the Premiere Elements 8.0.1 Update (Patch)
b. Turn of the Background Rendering (that should be done automatically by the installation of the 8.0.1 Update) but check anyway...Premiere Elements workspace Edit Menu/Preferences/General.
c. Turn of the AutoAnalyzer Feature (See Elements Organizer workspace Edit Menu/Preferences/AutoAnalyzer Options)
There are users out there successfully using Premiere Elements 8.0.1.
I do not work for Adobe nor have any affliation with them. I will take another look at your Premiere Elements 3.0.2 issue and see if I can come up with any worthwhile suggestions.
ATR
Add On....If you can burn to folder successfully, take just the VIDEO_TS Folder from the saved folder and burn that to a DVD disc using a program such as Nero (Burn Video Files category, not Make Data Disc) or the free program IMGBurn (strange program but effective for the purpose) using the Write files/folders to disc category. In either case, the VIDEO_TS will be burn to the DVD disc with the right file system for DVD-VIDEO on a DVD disc.

Import "Copy To:" choose button doesn't see other drives in Win 7?!

When I click "Choose" beside "Copy To:" on the import photos window I only see "My Desktop" and folders under my Windows username. I can't see any other drives on my system. I've tried both 2.5 and 3 Beta and I've encountered the same issue: I can only import to my C:\ drive and the workaround is to than move the imported files to the other drive in the Lightroom catalog menu. I'm running Windows 7 64-bit now (clean install). Any suggestions? This never happened with Vista... is it Win 7 related?? I can see the other drives in other parts of Lightroom, it's just the Import window that doesn't see them? Anyone?

On Mon, Oct 26, 2009 at 12:15 PM, aar1123 <[email protected]> said:
>
Oh, I see another post with the same issue from a few months back: http://forums.adobe.com/message/2174302#2174302
>
No replies to this thread - hopefully someone knows what to do?
That post mentions a DROBO (i.e., a non-local drive). Is that your
problem, as well? The drive you want to see but can't - is it an
internal drive? External, but directly attached drive (USB)? Some
networked drive?
>

Hardware Diagnostics Test doesn't see my network

I have a mid-2010 Macbook Pro that I just purchased, refurbished. I need to run a hardware diagnostics test on it as I am getting kernel panics after installing Adobe Creative Cloud.
I have confirmed that I have the ability to run this test. I hit option D at startup as instructed but when I get to the screen to choose my network, Mac doesn't see it. I even tried a wired ethernet connection and it's not seeing it.
I'm sitting in the same spot in the house as always and I can access wireless just fine when I start up normally.
Can anyone help? Thanks!

The AHT is almost completely useless, so you're not missing much. If you want to run it and you don't have the discs, you can order replacements from Apple customer service. You would do better to start a new thread describing the actual problem you have, rather than what you think is causing it or how you think it should be solved.

Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it?

Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it in some other form befor dragging it?

Hello djensen1x,
Could you please let me know what version of Acrobat are you using.
Also, tell me your workflow of combining those PDF files?
Please share the screenshot of the error message that you get.
Hope to get your response.
Regards,
Anubha

I have a big problem! My ipod touch is stuck! it won't open, all I see when I open it is the itunes icon with a USB cable and an arrow! What can I do? I've tried connectingit with itunes, but itunes doesn't see it. plus i have windows 8

Can't connect my ipod toch to itunes!!! It doesn't see it! I use windows 8, don't know if that's the problem. Anyways, my ipod is stuck! Every time I open it, it stays stuck with the image of a USB cable with an arrow pointing towards an itunes icon. but whatever I do, my computer doesn't see it, and neither does itunes. What to do???!!!

The the remaining items of the following, you may have to let the battery fully drain.
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

PSE 12 for Mac doesn't see my scanner

PSE12 for Mac refused to work with my scanner. In preferences I checked "Additional Plug-Ins Folder" and selected the Optional Plug-Ins Folder which contains the TWAIN.plugin. I restarted the PSE and the File> Import... command remains dimmed out. Tried resstarting the iMac and PSE still doesn't see the scanner. PSE 11 used to recognize the scanner right away. I hope this isn't a permanent change in PSE 12!
Thanks for any help!
OS X 10.8.5
Canon 8800F Scanner
TWAIN.plugin v12.0.4x001

Hi Barbara - I reinstalled PSE 11 on my iMac and verified that it still works with the Canon 8800F scanner. I also installed PSE 12 on my Macbook Air, moved the Twain plug into the right spot, and found that it doesn't see the scanner either. Preview on the Macbook does see the scanner OK so it's not a connection problem there either.
I noticed that the Twain plugins in PSE 11 and 12 are the same version but different sizes. The get info windows for the two versions of PSE on the iMac (Kahawalu) and the PSE 12 on the Airbook (Niumalu) are below. Would you be able to let me know the PSE 12 Twain file version and file size that is working with your Canon scanner? It might help narrow this thing down.
Thanks again for your assistance! William

I have prepared a book on iPhoto, ready to buy book. There is amessage above about half the pages that says "drag photo to place in background" as if it doesn't see the picture there. Its a MAC 08X 10.6.8 and iPhoto '08 7.1.5. I have made iBooks before b

I have prepared an 82 page book on iPhoto, ready to buy. There is a message over about half the photos saying "drag photo to place in background" as if it doesn't see the photo already there. I have spent over 20 hours getting to this point and can't bear to start over! Its a Mac 08X 10.6.8 and iPhoto 08 7.1.5. I have made other iBooks on this software and computer with no problems. Help please!

Look for a page that has a similar layout:
The one photo per page layout is the easiest to miss. Just click on a background color to remove the problem.
OT

Migration Assistant problem? : New iMac's iTunes doesn't see the catalog or playlist of my old Mac's songs on an external drive

So I just migrated from a 10.7.5 iMac 27" from 2009 to 10.9.4 on a 2013 27" iMac with Fusion Drive.
I don't use Time Machine. There are no backups involved here.
Used Ethernet. Only took 20 hours... (BTW, it stayed on "less than 1 minute left" for like 12 hours but luckily I was away and just left it going in hopes it would work... and it did!)
Anyway, back on my OLD iMac, I kept all of my songs on an external drive because my internal drive was too small. So iTunes looked at that drive for the music it was playing. I turned that drive off, even disconnected it, during the migration process because I thought it was confusing it during the first attempt which took 10 hours and nothing happened.
So now it worked, finally. On my new iMac, running Mavericks, I now have two user accounts... the one that was set up when I started the computer the first time, and the new one that transferred over via Migration Assistant. No problem. I can live with that. The only thing is, I would still think the old XML files and library stuff would migrate over... but iTunes doesn't see it. When I open up iTunes, in *either* account, iTunes behaves as if it's brand new. Repeat: the old and new account on the new iMac, both, do not see an old iTunes library which IS on the old iMac. Only the music is on the external drive from what I understand.
I've done this before so I know it's possible. I remember upgrading a long time ago and got iTunes to see my old library... even though some of the music was no longer there. It just puts "!" marks wherever there is no link. I was hoping that that's what I would find when I launched iTunes, but no luck. Even connecting the old hard drive to the new Mac (via USB) doesn't make iTunes all of a sudden "see" the old library. That data doesn't seem to be there. It didn't transfer over. Did it not transfer over because the songs weren't on the internal volume? Should I have left my external hard drive on?
So.... now that I've spent almost 3 days total trying to get this to work, and everything is running... I don't want to have to start over in order to get iTunes to work. Is there a way I can just drag over some XML files or something from the old computer? I don't want to lose all of the ratings and personal notes and everything.
I should add also that I have like only four songs I've ever actually bought through iTunes. I'm still a bit old fashioned and buy CDs and rip them to Apple Lossless. So I hope it's not an authorization / reauthorization issue because I have like 1400 albums ripped.
Thanks in advance for any help.
--Jeff

iTunes does not use the .xml it uses the .itl
If you are sure your old library file migrated across (does the file size and modification dates suggest it has?) start iTunes while holding down the option/alt key and guide it to the .itl file to get it to use that one.

Adobe doesn't see my stamps

Similar Messages

Maybe you are looking for