Adobe Dreamweaver software Login Wizard

A simple question, where's Adobe Dreamweaver® software
Login Wizard? It's supposed to be in the Commands tad of
Dreamweaver, but it's not, could someone please send me a
link?

If you are in a ColdFusion defined site in Dreamweaver it is
located under
Commands > ColdFusion Login Wizard
If you use any other server technology for the site it does
not show.
Ken Ford
Adobe Community Expert - Dreamweaver
Fordwebs, LLC
http://www.fordwebs.com
"connectivityone" <[email protected]> wrote
in message
news:fp7584$5e9$[email protected]..
>A simple question, where's Adobe Dreamweaver? software
Login Wizard? It's
>supposed to be in the Commands tad of Dreamweaver, but
it's not, could
>someone please send me a link?

Similar Messages

DreamWeaver CS Login Wizard

Hello,
I have just installed Coldfusion 8 and Adobe CS 3 (in that
order). I am goign through the documentation and it talks about the
Login Wizard extension for Dreamweaver. I have opened the samples,
made sure I had an active database connection, but still no Login
Wizard. What am I missing?
thanks,
mitch

Go to the Cold Fusion 8 downloads page .. there is an update
for Dreamweaver
and many other things, including extensions for Eclipse.
http://www.adobe.com/support/coldfusion/downloads.html
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: Dreamweaver CS3: The Missing Manual,
DMX 2004: The Complete Reference, DMX 2004: A Beginner's
Guide
Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"MitchDW" <[email protected]> wrote in
message
news:ffl1h3$pt$[email protected]..
> Hello,
>
> I have just installed Coldfusion 8 and Adobe CS 3 (in
that order). I am
> goign
> through the documentation and it talks about the Login
Wizard extension
> for
> Dreamweaver. I have opened the samples, made sure I had
an active database
> connection, but still no Login Wizard. What am I
missing?
>
> thanks,
> mitch
>
>

ColdFusion Login Wizard: How do you access this in Dreamweaver CS3

The 'ColdFusion MX 7 Extensions'
(CFMXDreamWeaverExtensions.mxp) could be installed for 'Dreamweaver
MX 2004' using the 'Adobe Extension Manager'. This then gave access
to the 'Coldfusion Login Wizard' available under
'Commands/Coldfusion Login Wizard'.
However, the file 'CFMX7DreamWeaverExtensions.mxp' generates
the error 'This version of the 'CFMX7 Extensions' extension is not
compatible with Dreamweaver CS3 when installing in Dreamweaver CS3.
I have downloaded 'dwmx2004_extensions_for_cfmx7.mxp' from
http://www.adobe.com/support/coldfusion/downloads.html
but this doesn't work!
I cannot find an equivalent .mxp file on the Adobe website or
explanation anywhere despite exhaustive searching!
Any help will be very gratefully received!

Hi Divya,
The below code is working for me. You can try with this: This is for currently logged in User.
String userName = "";
          IWDClientUser wdUser = null;
          try
               wdUser = WDClientUser.getCurrentUser();
          catch (WDUMException e)
               wdComponentAPI.getMessageManager().reportException(e.getLocalizedMessage(), false);
          IUser usernam = wdUser.getSAPUser();
          userName = usernam.getUniqueName();
regards,
Siva

Dreamweaver Login Wizard for Coldfusion 8

Hello,
I have just installed Coldfusion 8 and Adobe CS 3 (in that
order). I am goign through the documentation and it talks about the
Login Wizard extension for Dreamweaver. I have opened the samples,
made sure I had an active database connection, but still no Login
Wizard. What am I missing?
thanks,
mitch

MitchDW wrote:
> Hello,
>
> I have just installed Coldfusion 8 and Adobe CS 3 (in
that order). I am goign
> through the documentation and it talks about the Login
Wizard extension for
> Dreamweaver. I have opened the samples, made sure I had
an active database
> connection, but still no Login Wizard. What am I
missing?
>
> thanks,
> mitch
>
1) did you also install cf8 dw extensions? you can download
those from
adobe website.
2) did you enable RDS during the cf installation?
3) the login wizard is located under menu Commands -
Coldfusion Login
Wizard. have you been looking in the right spot?
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com

Dreamweaver Login Wizard won't complete

Hi
I have coldfusion MX 7 installed on the remote server and
Dreamweaver MX 2004 installed on my local desktop. I also installed
the ColdFusion MX7 extension(CFMX7 Extensions version 1.1.0 by
InterAKT Online) for dreamweaver on my local desktop. I want to try
the Login Wizard on the sample site (Extranet) that come with the
Coldfusion MX 7 installation. However, every time I launch the
login wizard, after the page "specify the Authentication Type", the
wizard navigation buttions at the bottom of the page are missing.
Can somebody tell me what might cause this?

Forgot about getting this problem solved.
The user account that had this trouble had a copy of his home directory from a laptop in his home directory. This backup had it's own Library folder which was confusing the Mobile account sync process.
When I removed the backup home directory, the initial sync went fine.

Unable to install Dreamweaver CS6 Upgrade ! from Hard Drive DUMP - Error : Adobe Genuine Software Verification Failure

Hello,
I am Unable to install Dreamweaver CS6 Upgrade from CS4 from Hard Drive DUMP -
Error :Installation Failed
Adobe Genuine Software Verification Failure
The product you are trying to install is not an adobe Genuine Software and appears to be counterfeit.
Can any one help me with this issue. I earlier installed it from DVD but, i am unable to find DVD. I have a copy of full DVD Dump in network.
Can someone help me fix the issue.
Note: I have installed Dreamweaver CS4 with serial number.and am trying to install upgrade over cs4.
Please help.
Thank you,
Sin

It was because i was installing directly from network dump.
I've managed to install and register software.
Thanks and my problem is resolved.

Adobe Dreamweaver cc 2014 "software license agreement" poping up before Run :(

Hi Guys ... I set up Adobe Dreamweaver cc on my windows 8.1 every thing is fine after instal but when I want to run it the " software license agreement " displays repeatly after I press "Accept" button
I've done most recommend ways in internet that was in other peoples problem but I give no result ... can anyone help me ?? !!!

Hi aliteylor,
Can you try the solutions in this doc and let us know if you still need help?
Error "Licensing has stopped working" | Windows
Thanks,
Preran

Our website was set up 10 years ago with Macromedia Dreamweaver. Can I download up to date Adobe Dreamweaver and still access and make changes? I do not have the old software

Anyone can help answer this? Thank you,

Most web site files can be edited using a simple text editor. It is not clear to me what you are looking for when you ask if you can download up to date Adobe Dreamweaver and still access and make changes. You certainly can, but you need to purchase the software to do so if you mean you want the latest versions.
The most current version is available thru a subscription basis.
Creative Cloud Plans
https://creative.adobe.com/#plans
You can always download a trial version which you can try for thirty days. Trial versions are fully functional.

Dreamweaver login wizard

Just installed dreamweaver 8 but I cannot see the login
wizard as per instructions
With a Coldfusion document open in Dreamweaver, select
Commands > ColdFusion Login Wizard.
Please help

Installing the Login Wizard
The Login Wizard is installed with ColdFusion MX 7 when you
install the Dreamweaver Extensions. If you did not install the
Dreamweaver Extensions when you installed ColdFusion MX 7, you can
install them separately.
To install the Dreamweaver Extensions:
Ensure that you have installed Dreamweaver 7.0.1 or later.
Make coldfusion/CFIDE/installers the current directory.
Double-click the CFMX7DreamWeaverExtensions.mxp file.
Follow the prompts in the installer.

Adobe Dreamweaver CS6 and Mavericks

Hi everyone,
I have recently upgraded to Mavericks on my Mac, however I am now experiencing seriously problems with Adobe Dreamweaver CS6. The program is running shockingly slow. It takes literally 10 minutes to open the program, whereas before the upgrade it took less an 1 minute! clicking any menu options or even a site element, or typing text takes ages to respond.
I posted in Adobe forums, and one answer was to disable Nap App, but it is already checked as disabled (grey out too), Adobe respoded directly by suggesting clearing the program cashe and preferences.
Other forums I have seen with similar problems suggest it is a Java issue. Dreamweaver requires Java SE6, I had Java 7JRE, and & JDK, which I uninstalled, and then re-installed Java 6, through a link to an Apple which downloaded a file (JavaForOSX2013-05), although I tried confirming that I was now running Java SE6 though Terminal and go the following message back:
Last login: Sat Nov 23 23:48:26 on console
iMac:~ imac$ java –version
Exception in thread "main" java.lang.NoClassDefFoundError: ?version
Caused by: java.lang.ClassNotFoundException: ?version
          at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
          at java.security.AccessController.doPrivileged(Native Method)
          at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
          at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
          at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
          at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
iMac:~ imac$
I really need to get Dreamweaver functionaing again properly and any help and support on this issue whould be greatly appreciated.
Kind Regards,
Ash Bullman

I am not sure what's the resolution to your problem. I don't want to install Java 6SE in Mavericks either because it's an old software; however, I have not been able to launch any apps in CS3 or CS5. Sooner or later, I'll have to surrender if I want to use any of those software.

Login wizard querying wrong table

Hi all
I use MSaccess/cf7/dwcs3 - and addt now - when i use the login wizard - i set the user table as the one to query for login - but the record set is querying the first table in the database not the correct one - which happens to be the last one - any ideas???
thanks FSM

-----
dreamweaver doesn't accept the spaces in the name.... hence user table won't work but user_table or usertable will
I have a gut feeling that Dreamweaver CS3 is a lot stricter with table & column names which don´t conform to the "rules".
It´s actually good that DW nowadays doesn´t accept names which would also lead to conflicts outside the DW realm, but it would certainly be better if DW would display some sort of "you can´t use this table name, because..." warning rather than having folks scratch their heads of the possible reasons of such a failure.
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

Installing Adobe Dreamweaver CS5.5 and PhotoShop 5.5 on windows 2008 R2 SP1 using Terminal services

Hi All,
Is it possible to install Adobe Dreamweaver CS5.5 and PhotoShop 5.5 on windows 2008 R2 SP1 using Terminal services. We are planning to use xenapp to publish these application.
Please let me know if this is a supported environment.
Regards
Radhika

As far as I know you will NOT be able to access OpenGL functionality through Terminal Services. as the OpenGL implementation provided in that environment is software, version 1.1 - not GPU-accelerated.
I seem to recall there was a thread about a year ago here where someone was trying to do what you are asking. I vaguely remember they were able to make it work, but I'm not sure. You might try doing a search of this forum.
-Noel

"Adobe Dreamweaver PHP Training from David Powers

“Adobe® Dreamweaver® CS5 with PHP Training from the Source David Powers
Lesson 7 Validating Input on the Server
I have reached page 445, and become completely stuck - I've been about three weeks trying to sort the problem but cant get anywhere. Not sure what to do from here so any advice would be really appreciated. The problem:
I have completed the script exactly as instructed, when I go live (local sever), I get a blank screen, OK, does not display. I am sure this is something simple but I have done all the fault finding and am out foxed. I know the local server works OK - I completed chapter 6 successfully - I can also run a php test page from the local folder that the file is stored in. i.e provictis/phpcs5. I have saved my ZendFraework in a separate location as advised. i.e. User/SPENNY/...
This is the basic code:
<?php
$library='/Users/SPENNY/ZendFramework/library';
set_include_path(get_include_path() . PATH_SEPARATOR .
$library);
require_once('Zend/Loader/Autoloader.php');
$loader=Zend_Loader_Autoloader::getInstance();
if ($loader) {
          echo 'ok';
} else {
          echo 'Huston we have a blinkin problem, but do not panic we will get things sorted';
Gareth

FIXED!!
1)
i finally did get the message problem was with:
$mailhost='ssl://mail.domain.com';
ssl:// was just nonsense and been removed
2)
'auth' => 'true' was changed to 'auth' => 'login'
3)
for bluehost i got information that it was tls secure connection protocol not ssl
'ssl' => 'tls'
4)
port used '25' not 465.
Didnt still tried 26 and 465 maybe they would work too.

Login wizard - CF9 server - "Coldfusion not is not running on the remote site" - YES it is!

I use Dreamweaver to upkeep sites for several friends and clients. When I use the login wizzard on a server with CF8, it works fine. If I use it on a server with CF9, I can't get past the *Coldfusion not is not running on the remote site* error. Yes it is running. I've tried connecting using FTP, RDS, directly over the network - you name it. Same error.
Any suggestions?
Thanks
Rick

Hi Rick
If you are trying to RDS log in to a remote server the host may have disabled this service... Most do, and should. Allowing remote RDS is a potential security risk. Check with your host to see if this is the case. If it is, it is always better to duplicate your host environment locally, that is be running CF9, and the database, be that MySQL, SQL Server, Access, or whatever locally and do all you development and testing there, then just upload the files when ready.
Hope this helps.
Lawrence Cramer - *Adobe Community Professional*
http://www.Cartweaver.com
Shopping Cart for Adobe Dreamweaver
available in PHP, ColdFusion, and ASP
Stay updated - http://blog.cartweaver.com

Frequent crashing in Adobe Dreamweaver CC 2014 on Windows 7 Professional 32bit

Dear All,
We have Adobe Dreamweaver CC 2014 installed as part of a Creative Cloud package across multiple machines running Windows 7 Professional 32bit.
EVERY time we open the software, we are able to run through the "demo" introduction but when we get to the create new document screen we get an "Adobe Dreamweaver CC 2014 has stopped working" error and have to close it.
We have tested this on multiple machines (adequate system specs) with multiple users and it is happening every time. I can confirm we have the latest version of DW CC 2014 installed and all Windows Updates.
Note: We have packaged Adobe Dreamweaver CS6 and this works without issue, we are able to open a new document with no problem.
Any help would be appreciated!
Regards,

Hi Mcarlinx,
Can you please share the screenshot of this location -
In Registry entry navigate to HKEY_CURRENT_USER\Software\Adobe\Dreamweaver CC 2014.1(or which ever version in which you are seeing the crash)\Cloud Sync preferences.
Also please share the logs -
How to Create crash logs on win –
You need to add these entries in registry.
1. Go to run, type regedit and enter. This will open Registry Editor.
2. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting->Right Click->New->Key. New key named "New Key #1" will be created. Rename it to LocalDumps. Add two entries LocalDumps
Right click on LocalDumps->New->Expandable String Value (REZ_EXPAND_SZ). Double click on the entry created and add value name : DumpFolder and value data : %LOCALAPPDATA%\CrashDumps.
Right click on LocalDumps->New->DWORD (32 bit) Value(REG_DWORD). Double click on the value created and add value name : DumpType and value data :1
Next time when the application crashes you will find the crash dump at C:\Users[UserName]\AppData\Local\CrashDumps. Dumps will be created only in case of crash and not hang.
Thanks!
Kusha

Adobe Dreamweaver software Login Wizard

Similar Messages

Maybe you are looking for