Adobe Drive with OS X 10.10 Yosemite

Hi,
since there is OS X 10.10 to be released within the next days we installed the latest available version today to check some stuff we build using Adobe Drive, but on OS X 10.10 Adobe Drive does not start.
Will there be an update available soon?
Greetings, Robert

It's not working for me either for the Yosemite release. What behavior are you seeing? I can bring up adobe drive, but can't connect with the connector. Is that the basic problem everyone is having?
I tried to attach to a CMIS drive I've attached to before and I see these errors in the AD4ServiceManager_java.log.
014/10/21 07:46:25,940 [ConnectionHandler-Adobe Drive-719] ERROR MountService - osIntegration.mount() failed
com.adobe.drive.data.model.DriveException: the server with uuid ac75ae3f-5219-4f5e-8d48-9871de535d4d could not be mounted
at com.adobe.drive.internal.biz.filesystem.mount.OperatingSystemIntegrationMac.mount(Operati ngSystemIntegrationMac.java:95)
at com.adobe.drive.internal.biz.filesystem.mount.MountService.internalMount(MountService.jav a:157)
at com.adobe.drive.internal.biz.filesystem.mount.MountService.mount(MountService.java:102)
at com.adobe.drive.ui.ncomm.handler.MountServerHandler.mountServer(MountServerHandler.java:2 90)
at com.adobe.drive.ui.ncomm.handler.AddServerHandler.handle(AddServerHandler.java:157)
at com.adobe.csi.internal.ncomm.InvokeHandler.handle(InvokeHandler.java:88)
at com.adobe.csi.internal.ncomm.NCommDelegate.execute(NCommDelegate.java:107)
at com.adobe.versioncue.internal.nativecomm.host.Host.execute(Host.java:200)
at com.adobe.versioncue.internal.nativecomm.host.ConnectionHandler.handleRequest(ConnectionH andler.java:162)
at com.adobe.versioncue.internal.nativecomm.host.ConnectionHandler.run(ConnectionHandler.jav a:81)
at java.lang.Thread.run(Thread.java:695)
2014/10/21 07:46:25,946 [ConnectionHandler-Adobe Drive-719] INFO DataManager - java.lang.NullPointerException
2014/10/21 07:46:25,954 [ConnectionHandler-Adobe Drive-719] INFO DetectServerOnlineWorker - ----------------------- clean state
2014/10/21 07:46:25,975 [ConnectionHandler-Adobe Drive-719] ERROR AddServerHandler - Adding server failed
com.adobe.drive.data.model.DriveException: the server with uuid ac75ae3f-5219-4f5e-8d48-9871de535d4d could not be mounted
at com.adobe.drive.internal.biz.filesystem.mount.OperatingSystemIntegrationMac.mount(Operati ngSystemIntegrationMac.java:95)
at com.adobe.drive.internal.biz.filesystem.mount.MountService.internalMount(MountService.jav a:157)
at com.adobe.drive.internal.biz.filesystem.mount.MountService.mount(MountService.java:102)
at com.adobe.drive.ui.ncomm.handler.MountServerHandler.mountServer(MountServerHandler.java:2 90)
at com.adobe.drive.ui.ncomm.handler.AddServerHandler.handle(AddServerHandler.java:157)
at com.adobe.csi.internal.ncomm.InvokeHandler.handle(InvokeHandler.java:88)
at com.adobe.csi.internal.ncomm.NCommDelegate.execute(NCommDelegate.java:107)
at com.adobe.versioncue.internal.nativecomm.host.Host.execute(Host.java:200)
at com.adobe.versioncue.internal.nativecomm.host.ConnectionHandler.handleRequest(ConnectionH andler.java:162)
at com.adobe.versioncue.internal.nativecomm.host.ConnectionHandler.run(ConnectionHandler.jav a:81)
at java.lang.Thread.run(Thread.java:695)

Similar Messages

Guide to connect Adobe drive with Alfresco CE

Hallo everybody!
Since adobe remove version cue, i search for a replacement. Can somebody please write a short guide how to configurate Alfresco CE to optimal work with adobe drive? Its drive me creasy, bljad! I think, i am not alone with this problem. Feel free to write here everethink, you found about it. Together we find a solution, i think.
The interest were (after connect Adobe drive to Alfresco CE):
- how configurate the space, where Alfresco CE saving the files ?
- how to set permissions to Alfresco CE drive to chek in the files from adobe programms?
- in bridge i cannot see the thumbnails of files (only the standart thumbs, maby it has something to do with the permission rights?)
- how can thomebody else from anywhere connect to Alfresco Cmis that is locally on my pc, like earler in versioncue, to callobarate)
Thanks to everybody for suggestions and help!
Adobe drive 2.1
Alfresco CE 3.4

Hi Borisbritva,
To work with Adobe Drive, you just need to install and launch Alfresco CE server. No special configuration.
Section 'Using the CMIS Connector' in CMIS CONNECTOR FOR ADOBE DRIVE 2.1: TECHNICAL NOTE doc shows the detailed steps on how to connect Alfresco server with Adobe Drive 2.1. Below is the link for the tech note:
http://help.adobe.com/en_US/creativesuite/cs/adobedrive/CMIS_Connector_Tech_Note.pdf
For "how configurate the space, where Alfresco CE saving the files ?" & "how to set permissions to Alfresco CE drive to chek in the files from adobe programms?", I think you need to read Alfresco Document ( http://www.alfresco.com/resources/documentation/ ). For simply try, use admin account to connect Alfresco Server with Adobe Drive. CMIS CONNECTOR FOR ADOBE DRIVE 2.1: TECHNICAL NOTE doc gives the detail info about how to browse, check in, and check out files.
For "in bridge i cannot see the thumbnails of files (only the standart thumbs, maby it has something to do with the permission rights?)", Adobe Drive 2.1 with CMIS connector doesn't support it. But Adobe Drive has exposed API to retrieve thumbnails of files. If you have interest, you can download Adobe Drive SDK ( http://www.adobe.com/devnet/adobedrive/eula_21.html ) and try it.
For "how can thomebody else from anywhere connect to Alfresco Cmis that is locally on my pc, like earler in versioncue, to callobarate)", Adobe Drive 2.1 with CMIS connector support it. Just replace 'localhost' with you external IP address in Server URL when connect to Alfresco server.
Thanks,
Hui

Does Adobe Drive work with OSX 10.10?

It does not work. Will there be an update?

Hi Fiona,
We are an Adobe Reseller, and we are having the same issues with our test environment.
I have contacted Adobe Adobe Customer Care on Twitter: "@JamieMcNelson Jamie, this might require further testing from the Drive team. I will fi…
And i have posted to the forum page you mentioned above: Re: Adobe Drive with OS X 10.10 Yosemite
Hopefully we will get some resolution to this issue, since we need to be able to sell this product with confidence.

Photoshop CS6 not allowing Check In with Adobe Drive 4.2 & AEM 5.6 DAM

I have just started to set up a AEM DAM for my design team to utilize. While it worked exactly as expected on one team member's computer, I am having some problems. I can only check items in or out through Bridge CS6. With both PS and Illustrator the "Check In" menu item is greyed out. Also, when I open a file in PS from the DAM, it doesn't automatically check the item. I've seen it work fine on a cowokers computer with a seemly similar setup. Any ideas?
Mac 10.7.5
PS CS6
Bridge CS6
Adobe Drive 4.2
CQ 5.5 and AEM 5.6 (same thing on both)
Thanks in advance!

In order for the Check In menu item to appear in the supported CS apps., the asset must be opened and a change must be made (it will then automatically be checked out).

I made a bootable disc on an external hard drive, with Yosemite on it. I am running Snow Leopard on my iMac. How can I open the Yosemite disc from the desktop on my iMac? Does the external hard drive need to be connected to my iMac by firewire to

I made a bootable disc on an external hard drive, with Yosemite on it. I am running Snow Leopard on my iMac. How can I open the Yosemite disc from the desktop on my iMac? Does the external hard drive need to be connected to my iMac by firewire to do that?

kahjot wrote:
Snow Leopard's Startup Disk pref can’t see Yosemite volumes. So the only way to switch from Snow Leopard to Yosemite is to do what Niel mentioned. Doesn't matter whether it's connected by USB or Firewire, although performance via FW would be faster.
Are you saying that Yos/10.10, as a volume located in a mounted external drive won't appear as an option in Snow Leopard's Startup Disc, in Sys Prefs? I've never heard this one before. AFAIK any mounted volume, regardless of OS, should appear there. I would think that, if it appears in the Boot Picker/Startup Manager it would also appear and could be booted to from Snow's Startup Disk. I can't test this myself, since I don't have Yos. Is what you are saying documented somewhere?

Developing: Endless loop in Adobe Bridge with and Adobe Drive CMIS Connector

Hi
Currently I’m implementing a CMIS-Server for the dam system of my company, using the apache chemistry framework. One of the main requirements is that adobe drive works with it.
At the moment I implemented only the navigation services (getChildren, getObject, …) and the repository services and test them against adobe drive. It’s already possible to navigate through folders and read assets with ad4 and the finder. So 3 days ago I installed adobe bridge (CS6) and test my server again.
My test environment is very easy.
root(1 object)->test1(0 objects; empty)
First I’m opening my repository with adobe drive and then I switch to bridge and connect it. Bridge shows me the folder test1 with no errors. So I double-click it and now bridge is in an endless loop. The notification switch between ‘Keine anzuzeigenden Elemente’(No elements to show) and ‘Einen Moment bitte, die Suche läuft …’(Searching, please wait …). This only happens in bridge. When I open the folder with the finder it just works, without the loop.
So I logged all requests, which were send by adobe drive, and get this list.
Connecting with adobe drive
getRepositoryInfos
getTypeChildren (null) -> all basetypes
getTypeDecendants (cmis:document)
getTypeChildren (null) -> all basetypes (Why two times?)
getTypeDecendants (cmis:document) (Why two times?)
getRepositoryInfos (Why two times?)
getObjectByPath (/.hidden)
getObjectByPath (/.hidden)
getObjectByPath (/.hidden) (Why so often?)
getObjectByPath (/DCIM)
getObjectByPath (/mach_kernel)
getObjectByPath (/.Spotlight-V100)
getObjectByPath (/.metadata_never_index)
getObjectByPath (/.metadata_never_index_unless_rootfs)
getObjectByPath (/.metadata_never_index)
getObjectByPath (/mach_kernel)
getObjectByPath (/.metadata_never_index_unless_rootfs)
getChildren (cmis:folder,0) (rootfolder) returning only one element (test1)
getObjectParents(cmis:folder,127) (test1) returning the rootfolder
getObjectByPath (/.hidden)
getObjectByPath (/mach_kernel) …
Open the Cmis repository in bridge and doubleclick the repository
getChildren (cmis:folder,0) (rootfolder) returning only one element (test1)
getObjectParents(cmis:folder,127) (test1) returning the rootfolder
Then I double click the test1 folder
getObject(cmis:folder,127)(test1)
getChildren(cmis:folder,127) -> empty list
… (endless loop)
I already checked getObject and getChildren against a reference implementation (FileShare Repository of apache Chemistry) and it returns exactly the same structure. Only the name and the timestamps are different. So my second though was to check the repository capabilities and as well they are both equal. Now I’m a little bit desperate because I spend already 3 days in try and error bugfixing but nothing worked. So here are my questions.
Is there a logfile for bridge because I thing this refreshing happens after an exception. I already checked the adobe drive log and it contains only asset not found errors for (e.g mach_kernel …).
In which circumstances does bridge reloads a folder?
Debugging of adobe drive: I already read http://forums.adobe.com/message/3928595 but it doesn’t work in AD4 any more, I only get info/error/fatal messages.(I changed the log4j config files in AD4ServiceManager.) Does something changed or did I forget something?
Why does AD4 make 2 or more times the exact same request? (Look table above).
I hope my English is good enough to understand.
Thanks

After two months I'm a little bit smarter so I can answer some of my question by my own.
No there is no logfile for bridge, but I was able to debug the scriptcode from the ad plugin, which is installed in bridge.
If an error occures in the plugin
I was able to decompile the cmis connector. That helps a lot when ad logs with weird exceptions.
Because AD maps the actions of the filebrowser(finder,explorer) to cmis and this one does sometimes the exact action two or more times.
Unfortunately is wasn't able to fix my main problem, but I found a workaround to use cmis in bridge. I deactivated the ad plugin in bridge and after that action, bride display the cmis volume as normal volume. Sadly some actions like to manage relationships etc. are with this workaround not usable but for me this is alright.

Adobe Drive and Alfresco Enterprise Fails to Check-in With Custom Content Types

Hello all,
I've been struggling with some drive limitations over the last few weeks as we try to utilize the CMIS connector to Alfresco. I am currently testing with Adobe Drive 3.2.0.41 and Alfresco 4.0.1 Enterprise but have tested this behavior with Drive 4.0.2.6 paired with Alfresco 4.1.1.3 and seen the same behavior:
The issue I am seeing is that I am unable to Check in a new document into the repository when there is a rule set up to apply a custom content type from our model. After entering my check-in comment and pressing OK, I get an unknown error from Bridge, InDesign, or Photoshop. It works fine if I do not specialize our type with a rule (leaving the content as cm:content). The error I recieve in Alfresco is: org.alfresco.service.cmr.repository.CopyServiceException: The source and destination node must be the same type.
I understand that this might be a limitation of Drive and Alfresco working together, but I just wanted to see if anyone had any experience with this issue or any potential workaround, since it is pretty limiting for alfresco to not have any non OOTB content types.
Thanks, your help would be appreciated.
Mike

Adobe Drive CC still has this issue. I can dra-n-drop a .PSD into Alfresco 4.2 and it will work perfectly - unless I use Adobe Drive to edit and check-in the file.

Check in dialog with Adobe Drive 4.2 doesn't work

Hi,
we are currently implementing a custom check-in dialog using Adobe Drive 4.2.
The dialog looks like the example given in discussion "Custom check in dialog".
To build the SWF, I use Flash Builder 4.5 with Adobe Flex SDK 4.0.0 (flex_sdk_4.0.0.14159A).
I have created a new Flex Project with Application type "Web" and added a MXML Modul with name "CustomUI" and option "Do not optimize (module can be loaded by multiple applications)".
After compiling the project I extract the "CustomUI.swf" and copy the file in the "resources" folder of my Custom Adobe Drive adapter.
I implement the "IGetCustomCheckInUIHandler", "ICanEnableCustomCheckInUIHandler" and "IGetCustomCheckInUIContextInfoHandler":
"IGetCustomCheckInUIHandler" sets the module url like
response.setModuleURL(Thread.currentThread().getContextClassLoader().getResource("resource s/CustomUI.swf"));
"ICanEnableCustomCheckInUIHandler" enables the custom ui dialog with
response.setCanEnable(true);
"IGetCustomCheckInUIContextInfoHandler" adds some context data like
Map<String, Object> contextInfo = new HashMap<String, Object>();
contextInfo.put("key1", "test1");
response.setContextInfo(contextInfo);
(Also hidding the "IGetCustomCheckInUIContextInfoHandler" in "IRemoteHandlerFactory" doesn't work.)
Right click on an checked out asset in Windows Explorer and click on "Adobe Drive 4/Check in..." does following:
1. "IGetCustomCheckInUIHandler" called
2. "ICanEnableCustomCheckInUIHandler" called
3. "IGetCustomCheckInUIHandler" once more called
4. "IGetCustomCheckInUIContextInfoHandler" called
5. The default check in dialog is shown (with no custom ui extension), the default dialog hangs (OK/Cancel doesn't react on click, the dialog is freezed). Only the close button (X in the right upper corner) works.
How is it possible to provide a custom ui check in dialog?
Thanks

Hi again.
I found where the problem was (at least in my case).
To go to the point: go in the "properties" of your flex project. In the menu, go in "Flex Build Path" and then in "Library Path". Then, the option "Framework linkage" is with the default value in a new flex project.
So here is the trick : with Flex 3 (so Adobe Drive 3), the default value is "merged into code". Bug in the Flex 4 (so Adobe Drive 5), the default value is "Runtime Shared Library".
And because the module is ran independently (with no link with the flex code that load your module), the flash player crashes because it doesn't find your libraries (like ICustomCheckinUI).
I discovered this problem running the Custom UI from the windows explorer (not with Bridge) and using the Flash Player Debug version, and watching the error log files of the Flash Player.
So in the end, when I checked "merged into code" in the Framework Linkage option, all my dependencies of my flex module were merged into my final module swf, and no more flash crash.
Sorry for my bad english and hope it helped.
Guillaume
(edit : screenshot at http://www.hostingpics.net/viewer.php?id=276932flexbuildpath.png )

No previews in Bridge with Adobe Drive 3?

We are using a custom connector for Adobe Drive. Windows Explorer shows the correct thumbnails and previews for asset versions (in the Show Versions UI). However in Bridge we cannot see any thumbnails or previews. Clearing or purging the cache does not help. It turns out that the execute method in the GetPreviewIconHandler class is never called when browsing assets in Bridge. This used to work fine with Adobe Drive 2 (at least for jpg previews, png previews never seemed to work in Bridge). We tried different Bridge versions (4.0.4.2, 4.0.5.11, 4.1.054) but they all have the same problem. Did anything change regarding this behavior in Adobe Drive 3? Thanks in advance for any advice.

Indeed, adding the READ_XMP_METADATA capability seems to do the trick.
Thanks for the quick help.

Using Acrobat with Adobe Drive

I am exploring using Acrobat professional with Adobe Drive 2.1. I have not seen an explict statement that Acrobat can use Adobe drive.
Here are my questions:
1. Can Acrobat 9 or 10 interact with Adobe Drive 2.1?
2. Are there any Acrobat limitations to using the exposed Adobe Drive 2.1 CMIS functionality?
Thanks
Tom

FatMac>MacPro is correct about using Preview to read PDF's. It is built in, reliable and kept up to date by Apple software updates.
Adobe Reader has had vulnerabilities that can cause your Mac to be attacked via malicious PDF's. Keeping Reader up to date is essential for good security, however Adobe updaters nag so much that it is simpler to avoid installing it if at all possible.
PC users recommend it because they had no PDF support for so long, OS X has always had PDF support from Apple.

Adobe Drive 3 CMIS work with SharePoint 2013? (Getting errors)

Hello guys.
I'm trying to use Adobe Drive 3 with SharePoint 2013 to sync a folder by CMIS without success.
I get a "Drive already mounted" message with an "Invalid location" error. Already tried using rest and soap url's, and on the SharePoint, the CMIS is
enabled as well as the basic authentication (and the credentials are correct).
Here's my Drive log (http://tny.cz/694b8841)
I believe that this is a SharePoint problem maybe, but I don't know what to look at. Can someone help me on this?
And also, is there anyone that have already did this? (Drive 3 + SharePoint 2013 CMIS).
Thanks in advance,
Matheus Barreto.

Found it only work with Asset Libraries type of library on SharePoint, but even this way, on my Windows side I get a error about the drive the Adobe Drive create... My conclusion for now is that it does not work.

How can i use adobe drive/cs4 for storing images and interact this with adobe cq5.4 DAM...

Hi,
Can anybody suggest me i want use adobe drive to store images and i want to access the images for my cq5.4 instance..
I want to integrate drive to the cq5.4 dam for ignoring the dam burden on cq5 instane repository..
Is it possible to use this drive? or is there any other way i can achieve my task?
Thanks,
Sony C.

Adobe Drive software doesn't store images; it enables integration of a DAM system with Creative Suite and now Creative Cloud desktop apps.
Adobe Drive 3 is the first version of the software to support integration with Adobe's DAM. This version was designed to work with CS5 and CS5.5 apps.
We do not have a version of Drive that supports integration with CQ 5.4 DAM and CS4 apps.

Getting going with Adobe Drive 4

So we're looking for a Digital Asset Management system. Since we use the Master Collection, times 14, so an Adobe solution would be great!
We found Adobe Drive 4 to be a perfect fit for us...
However getting started has been a pain in the ***....
We have a Mac Pro, with 2 x quadcore 3.2's, 32 GB of RAM, 1 x 256GB SSD, 26 TB eSATA and Firewire 800 connectors... Installed on it is the Master Collection, OSX Server and Adobe Drive, that's it!
Fast forward to yesterday as my ip address, 10.0.0.108, as I type in the Adobe CQ Digital Asset Management details, server url, username, password, desplay name, I get the following error...
"The server could not be connected"
com.adobe.drive.connector.api.exception.RemoteSystemNotFoundException: Failed to connect repository
I've tried everything I can think of to get Adobe Drive 4 connected so I can get our assests under control... I'm at my wits end an need help getting this up and running..
PLEASE!
Ted

You’ll need to identify an asset management system to work with…either from Adobe or a number of outside vendors. To fully enable the Adobe Drive connection to a DAM server, one needs an Adobe Drive plug-in (what we call connectors) to interface with the DAM. Adobe Drive includes a connector that is designed to work with Adobe’s CQ DAM, now Adobe Experience Manager DAM. We also include a generic CMIS compliant connector that will work with servers that implement the Content Management Interoperability Services (CMIS) specification. There are also custom connectors available from third-party vendors that are designed to work with their DAM systems.
If you are interested in learning more about the Adobe Experience Manager DAM, go here.

Issue with Adobe Drive showing 2 drives when connecting to a HA environment

I am using Adobe Drive 5 and when connecting to a HA application it shows 2 drives. Even if I use the direct IP of one node 2 drives show up
Any idea how to stop a second drive shown up?

I have "SMB/CIFS" not "SMB/CIS" - does that make a difference? (I'm in uncharted waters here...)
When I go to Configure it, the default Workgroup is "Windows" in what looks like a drop down menu, but there is nothing else in the menu.
The WINS Server: is blank and I can't type anything in it.
I changed "Windows" (because I can type there) to the Workgroup of my school, and tried again with the same results.
The "Apply" and "Revert" buttons are grayed out. Only a few of the options are checked: AppleTalk, Bonjour (grayed), LDApv3, SLP, and SMB/CIFS
Authentication is set to Custom Path (/Netinfo/DefaultLocalNode)
Contacts set to "Automatic" (same path as above)
I'm trying to be a thorough as I can in my description, because I'm unfamiliar with this utility and want to make sure I'm not missing anything.
Thanks.

Adobe drive V3.2 with Documentum

Hello,
I installed Adobe drive V3.2 and linked it with Documentum. I have now a network folder that is what I have in my Documentum repository.
When I try to check out the document from this network folder by selecting the menu "Adobe drive 3" and then "Checkout", I get a message telling that the document has already been checkedout meanwhile, which is not correct.
Have you already had this message? Do you know why I have this message? I have to checkout the document in Documentum and then I can modify it, which is very userfriendly!
Thanks for an answer.
Frédérique Andolfatto

Hi again.
I found where the problem was (at least in my case).
To go to the point: go in the "properties" of your flex project. In the menu, go in "Flex Build Path" and then in "Library Path". Then, the option "Framework linkage" is with the default value in a new flex project.
So here is the trick : with Flex 3 (so Adobe Drive 3), the default value is "merged into code". Bug in the Flex 4 (so Adobe Drive 5), the default value is "Runtime Shared Library".
And because the module is ran independently (with no link with the flex code that load your module), the flash player crashes because it doesn't find your libraries (like ICustomCheckinUI).
I discovered this problem running the Custom UI from the windows explorer (not with Bridge) and using the Flash Player Debug version, and watching the error log files of the Flash Player.
So in the end, when I checked "merged into code" in the Framework Linkage option, all my dependencies of my flex module were merged into my final module swf, and no more flash crash.
Sorry for my bad english and hope it helped.
Guillaume
(edit : screenshot at http://www.hostingpics.net/viewer.php?id=276932flexbuildpath.png )

Adobe Drive with OS X 10.10 Yosemite

Similar Messages

Maybe you are looking for