Adobe Dynamic Link Import AE file

Hi there!
Well i have my dvd almost done (WWoowwow!):P
My intro and all the footage are basically motion graphics done in AE..
Do i need to transcode it? (some of the AE elements are chroma key hdv footage). If so, why does it take so much time do do it (the two AE imported files are the first with 1 min. and the other with 15 min., i left it yesterday and it is already transcoding..:S )
Thanks a lot!
Cheers!=)

> If so, why does it take so much time do do it (the two AE imported files are the first with 1 min. and the other with 15 min., i left it yesterday and it is already transcoding.
Well, if it already started transcoding, what is the complaint? Does it take some time? Logical. Just wait till it is finished. In severe cases this may take over 24 hours just for SD, so HDV will be a bit longer (4 to 5 times).

Similar Messages

  • Grey Adobe dynamic link

    Hi,
    I purchased CS4 Web premium which comes with Soundbooth.  I later purchased Premiere Pro CS4.  When I try to use File>Adobe dynamic link>Import Premiere Pro Sequence, "Import Premiere Pro Sequence" is greyed out.  Also, if I go to import - it looks as if Premiere Pro files are not supported?
    Any Suggestions?
    Thanks,
    Randy

    You need to create a multi-track file. File>New>Multitrack File (Ctrl+Shift+N). At this point, you will be able to import using dynamic link from either PPro or AE. If I may ask, why are you importing from PPro? You're better off dynamic linking from PPro to Soundbooth, that way you'll receive immediate changes applied to PPro when you change something in Soundbooth.

  • Import Premiere Pro Sequence grayed out in Adobe Dynamic Link

    I'm using PPro CC, and encore CS6. I have created a finished sequence in Premiere Pro, and I want to bring it into Encore. When I go to -> file -> adobe dynamic link, the premiere pro sequence option is grayed out. Why?

    OK, well that explains it. Does that mean that if I import a PProCC sequence into encore,
    It means you can't import the sequence itself. You must export a file of some kind from PR/AME, then import that. And yes, there is no way to get your CC projects to update automatically to Encore. You must export a fresh file. You can use "replace asset" and such to simply changing the file.
    I went to the link above, and was somewhat distressed to see that the industry is moving away from physical media in favor of streaming. Won't happen in my lifetime, but a world without books and records and DVDs and CDs, etc.? Scarey!
    Adobe needed some excuse, and that was theirs. There is clearly a very significant number of users that are a) event videographers/editors who must deliver DVD/bluray to clients and b) hobbyists who want the disk format for themselves and to share. My favorite guesses are a) that Rovio's takeover of Sonic/Roxio voluntarily or involuntarily squeezed Adobe financially or b) they don't want to invest the dollars in other aspects of fixing/upgrading Encore.

  • Encore locks up when using the Adobe Dynamic Link to import Bluray video.

    When I try to import video into Encore by using either the Adobe Dynamic Link or by opening Encore and importing as a timeline,  Encore locks up during the "Prepare Transcode Settings" .  I have Adobe Master Suite CS5 which was a download version.  I've had this software since May 2011.  I have been able to use import video in the past, but there seems to be an issue with Encore now.  Has the program been corrupted? If I need to download Encore to repair it, how do I do this?
    Thanks
    Joe Miller

    Some other things to read...
    Reset Corrupted Preferences = Press/HOLD Ctrl+Alt+Shift while starting program
    As well as the below, right click the Encore icon and select Run as Administrator, which is NOT the same thing as running the computer with the Administrator account, and which fixes several "odd" problems... To create a two layer DVD (or a BluRay?), you MUST have Encore set to use the Run as Administrator option
    Run as Administrator http://forums.adobe.com/thread/771202
    Odd Errors http://forums.adobe.com/thread/670174
    Long File Names or odd characters cause problems
    Read http://forums.adobe.com/thread/588273
    And #4 http://forums.adobe.com/thread/666558
    And This Message Thread http://forums.adobe.com/thread/665641

  • File failure with Adobe Dynamic link when opening a *.prproj file - Premiere Pro CS4

    Hi everyone,
    I'm trying to open a Premiere Pro CS4 file (*.prproj) but the bar that appears sating 'Opening file' (or similar) gets stopped before finishing to load the file.
    I tryed to export some sequences using Adobe Media Encoder CS4 (I wanted to rescue my work), but when I have to select the sequences that I want to export, it says that there is a problem with Adobe Dynamic Link.
    Any idea for rescue the file?
    Thanks!
    Jordi

    function(){return A.apply(null,[this].concat($A(arguments)))}
    enrage222 wrote:
    which question? the 9 dots?
    Go directly to http://premierepro.wikia.com/wiki/Troubleshooting
    Read and follow all instructions for troubleshooting
    Report back with the answers to the questions at the end of that link

  • Adobe Dynamic Link or Export from Premiere and load into Encore?

    Hi
    I'm making some tests about authoring DVDs and Blu-Rays from Encore CS6. My video editions are made in Adobe Premiere Pro CS6.
    Looks like I have 2 ways to send contents from Premiere Pro to Encore.
    1) I can set all my editions in Premiere Pro, then Export the entire timeline to a MPEG-2 DVD or MPEG-2 BLU-Ray file, then start a new Encore project and import this video file as a timeline.
    2) I can finish my editions in Premiere Pro, then use the Adobe Dynamic Link > Send to Encore options. So, it's not necessary to export files, since the task of transcoding is an Encore's task.
    Question is: Any advantage of using way 1 or 2??? Thinking about speed to finish the job, is one way better than other?
    What do you use do choose?
    Thank you for these tips
    Gustavo.

    Hi Stanley
    Thank you very much for your tips. Just one thing:
    In Premiere we can choose, for Blu-Rays, the MPEG-2 or H.264 codecs. You mentioned the H.264 Bly-Ray choice.
    Any advantage regarding the H.264 instead of the own MPEG-2 coded?
    Best Regards and thank you very much again.
    Gustavo.

  • Soundbooth CS4, Premiere Pro CS4, & Adobe Dynamic Link

    What do I need to do to import Premiere Pro timelines into Soundbooth? The option for "Adobe Dynamic Link" is in the File menu, but the "Import Premiere Pro Sequence..." option is grayed out and unavailable. Soundbooth was purchased and installed separately from Premiere, but both applications are CS4.

    Don't waste your time!!
    Read this thread:
    http://www.adobeforums.com/webx/.59b76657/2
    Dynamic Link is a marketing pipe dream, not a pipeline!

  • Adobe Dynamic Link

    Hey Everyone:
    Just curious about something.
    When using the Adobe Dynamic Link feature in Encore, I import an After Effects project for a menu (or menu transition; basically whenever I use the AD Link). As with most any project I want to make a change to the AE project I imported so i go into AE and fix it, however my changes are not displayed in Encore. This is no big deal but I know the whole point of the Dynamic Link is so you can see instant changes when going from program to program.
    The link works as it should when I'm using premiere, but it seems like the projects are not updating themselves in Encore when I change it in AE.
    Anyone else have this problem?
    Thanks!
    Tony

    jimclark1947 wrote:
    So is Pr Seq the file name I will look for?  And can I expect to find it in the default folders set up when I installed CS4?
    When you are in Encore and import a Pr Seq , navigate to the Pr Project name and when you select that the sequences inside the Pr project will be displayed.    There are no OS file names associated with the Sequences because they arent rendered yet or need even to be rendered.
    Take care to be patient when you click on the project name; it can take several seconds for it to lookup and display the sequences in the right pane.

  • Encore Adobe Dynamic Link Audio problem

    I have a multiple video files that I have put together in Premiere.  The are HD Dolby 5.1 sound.  I have about 10 of these together. So I export them to Encore using the Adobe Dynamic Link. I built the menu system.  When I burn the dvd and try it.  It plays through the first two clips just fine and when it gets to the third. The sound goes out and never returns on the rest of the clips.  But when I test it in Encore and Premiere there is sound and it works great.  Anyone know why when i burn the dvd I loose the sound on the 3rd clip?  Thanks.

    I can't help directly, but I never use Dynamic Link because I have read of problems
    http://forums.adobe.com/thread/936216
    http://forums.adobe.com/thread/938108
    http://forums.adobe.com/thread/938549
    So, as a test, export as appropriate out of PPro and then import the files (video & audio) into a new project in Encore

  • Adobe dynamic link - ACROSS multiple boxes on one LAN?

    Looking for help using ADOBE DYNAMIC LINK - But not one machine but between 2 different machines on one network - one AE, one Premiere CC: We need to be able to at least move between different motion graphics and editing machines.
    I want the animator to stick her file on the server - i put it in the timeline - it needs work - she changes the file - keeps the same name - and it refreshes and updates.
    To me - it is what Adobe is offering about working in the cloud, just is just a local cloud - so it should work?
    This post DOES NOT cover our need but i assume it IS possible?
    http://helpx.adobe.com/premiere-pro/using/dynamic-link.html
    Thanks.

    No, Dynamic Link does not work between multiple computers.

  • Issues with transferring CS5 project with Adobe Dynamic Links to CS5.5

    Hello all!
    Has anybody encountered the issue with transferring CS5 projects with Adobe Dynamic Links to CS5.5?
    When I try to do it the movie hangs on at some clips which are AE compositions...
    The CS5 project works perfectly.
    All AE CS5 compositions are transerred to AE CS5.5 compositions.
    All 'old' Adobe Dynamic Links in Pr CS5.5 project are changed to 'new' ones (I mean, links to AE CS5 composition changed to links to AE CS5.5 compositions)...
    Any help will be appreciated

    Tried to play around. Realised that a solution should be somewhere around re-rendering, 'cos linked AE compositions were always displayed in yellow as if they were original footages - even I changed a composition within AE, just transitions, if they were, changed to red in Pr Pro sequence...
    However, I was unable to re-render 'Entire Work Area' even after deleting all Render Files, just 'Effects in Work Area'...
    Then I simply created a new sequence and copied and pasted all the clips from original sequence. Now I was allowed to 'Render Entire Work Area'.
    Voilà!

  • I can't find the adobe dynamic link to encore in premiere pro...?

    New to encore and dynamic link... I'm running Premiere Pro CC and Encore CS6.  When I go to send my sequence to Encore (File>Adobe Dynamic Link>..), there is no "Send to Encore" like what I've heard in seen in the tutorials... any ideas?
    I've also tried to dynamic link from encore to premiere pro, but it never loads the sequence.

    a workaround for the Cloud http://blogs.adobe.com/davtechtable/
    -http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html
    -http://tv.adobe.com/watch/davtechtable/using-premiere-pro-cc-encore-cs6-for-bluray-dvd-and -interactive-video-for-ipadatv-and-mobile-hd/

  • Adobe Dynamic Link doesn't work !

    I'm using Adobe Encore DVD 2 and After Effect 7 . My problem is i can not use the Adobe Dynamic Link . It's always invisible , and i can not use it to import After Effect Composition to my DVD project or Create New After Effect Composition . Please show me how to make it possible to be used . Do i need to do something more !

    Answered

  • Why does my Premiere CC 2014 crash every time I use "Adobe Dynamic Link" and have After Effects CC 2014 open in the background?

    Here are my MacBook Specs:
    MacBook Pro (15-inch, Mid 2012)
    2.6 GHz Intel Core i7
    16 GB 1600 MHz DDR3
    NVIDIA GeForce GT 650M 1024 MB
    480 GB Solid State SATA Drive
    750 GB SATA Disk
    I use "Adobe Dynamic Link" mainly for typography and some animation, but not to the point where it would stress out Premiere CC 2014.

    Chris,
    It doesn't crash for everyone.  A person could be forgiven for saying, in return, "Please sort out your **** system problems". 
    Trust me when I say many, many problems are caused by the computer system setup not being up to the needs of this cutting-edge graphics software.  Photoshop is heavily dependent on the GPU, and GPU drivers are notorious for having bugs (they're primarily written to run games).
    However, that being said, recent driver releases from both ATI and nVidia do actually work pretty well with Photoshop CC 2014.
    What video card do you have?
    What display driver version are you running?
    If you're unsure how to tell these things, go into Photoshop, choose Help - System Info, copy the data, and post it here.
    -Noel

  • How do I close Adobe Dynamic Link Manager & Adobe Media Core to install After Effects?

    when i try and install the after effects cc it tells me to close the following programmes: after effects, adobe dynamic link manager and adobe media core.
    How do i close the last 2??

    You can also restart your computer to make sure that everything has been quite that needs to be. Restarting before and after installing major software is a good idea in general, anyway.

Maybe you are looking for

  • Duplication of Entry when we use the same view in two different components.

    Dear Experts, We have created a z table in Activity Screen (component: ORDERADM_H) and later on we have reused the same table on Lead screen (component: BT108H_LEA) as required by Business. To reuse the table- I did the following steps 1. Used AET We

  • Windows Boots to Black Screen w/Blinking white cursor, and then...

    I installed a new OCZ sata II SSD in my iMac 27' mid-2010.  I bought the cables and pressure wall from an AASP, so it's all Apple in there except for the OCZ drive. The 2TB internal drive (factory) is in there, too. Installed SL to the SSD and update

  • How to customize JSP page in iSupport

    Hi, I have worked on OA framework. But I have got a requirement to customize iSupport page in oracle apps. There is a Next button on page, I want to call one DB function by passing 2 parameters to this function. Get the result from that function and

  • Bi Publisher Performance

    Hi Gurus, I'm new to BIP while generating a report it takes more time How can i tune it can any one explain some performance tuning steps for Bi Publisher Thanks & Regards, praveen

  • Webloc File Set to Open in Safari Doesn't

    This is a small problem that seems like it shouldn't exist.  Firefox is my default browser (set as default within Safari preferences).  I also keep current versions of Safari and Chrome on my computer.  I work at a college and, in order to access thi