Adobe Dynamic Link or Export from Premiere and load into Encore?

Hi
I'm making some tests about authoring DVDs and Blu-Rays from Encore CS6. My video editions are made in Adobe Premiere Pro CS6.
Looks like I have 2 ways to send contents from Premiere Pro to Encore.
1) I can set all my editions in Premiere Pro, then Export the entire timeline to a MPEG-2 DVD or MPEG-2 BLU-Ray file, then start a new Encore project and import this video file as a timeline.
2) I can finish my editions in Premiere Pro, then use the Adobe Dynamic Link > Send to Encore options. So, it's not necessary to export files, since the task of transcoding is an Encore's task.
Question is: Any advantage of using way 1 or 2??? Thinking about speed to finish the job, is one way better than other?
What do you use do choose?
Thank you for these tips
Gustavo.

Hi Stanley
Thank you very much for your tips. Just one thing:
In Premiere we can choose, for Blu-Rays, the MPEG-2 or H.264 codecs. You mentioned the H.264 Bly-Ray choice.
Any advantage regarding the H.264 instead of the own MPEG-2 coded?
Best Regards and thank you very much again.
Gustavo.

Similar Messages

Adobe Media Encoder Fails Export from Premiere

AME will not start the render qeue. I have tried Clip notes and different output types. I have embedded After Effects comps in my Premiere timeline. Could that be a cause? This is my first time working with Premiere and AE together.
Error log below:
- Source File: C:\Users\Alex\AppData\Local\Temp\Cosmetics Working_2.prproj
- Output File: F:\Premiere Projects\20090803 Shapiro Cosmetics\From Prem Timeline\Working Copy.pdf
- Preset Used: Custom
- Video:
- Audio:
- Bitrate:
- Encoding Time: 18:16:01
9/17/2009 3:37:39 PM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
- Source File: C:\Users\Alex\AppData\Local\Temp\Cosmetics Working_3.prproj
- Output File: F:\Premiere Projects\20090803 Shapiro Cosmetics\From Prem Timeline\New Pierre Video.avi
- Preset Used: NTSC DV
- Video:
- Audio:
- Bitrate:
- Encoding Time: 18:19:04
9/17/2009 3:40:43 PM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
- Source File: C:\Users\Alex\AppData\Local\Temp\Cosmetics Working_4.prproj
- Output File: F:\Premiere Projects\20090803 Shapiro Cosmetics\From Prem Timeline\Working Copy.wmv
- Preset Used: NTSC Source to Download 512kbps
- Video:
- Audio:
- Bitrate:
- Encoding Time: 18:22:58
9/17/2009 3:44:37 PM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
- Source File: C:\Users\Alex\AppData\Local\Temp\Cosmetics Working_5.prproj
- Output File: F:\Premiere Projects\20090803 Shapiro Cosmetics\From Prem Timeline\Working Copy.avi
- Preset Used: NTSC DV
- Video:
- Audio:
- Bitrate:
- Encoding Time: 18:26:09
9/17/2009 3:47:48 PM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
- Source File: C:\Users\Alex\AppData\Local\Temp\Cosmetics Working_6.prproj
- Output File: F:\Premiere Projects\20090803 Shapiro Cosmetics\From Prem Timeline\Working Copy.avi
- Preset Used: Custom
- Video:
- Audio:
- Bitrate:
- Encoding Time: 18:34:14
9/17/2009 3:55:52 PM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
- Source File: C:\Users\Alex\AppData\Local\Temp\Cosmetics Working_7.prproj
- Output File: F:\Premiere Projects\20090803 Shapiro Cosmetics\From Prem Timeline\Working Copy.pdf
- Preset Used: NTSC Source to 512kbps
- Video:
- Audio:
- Bitrate:
- Encoding Time: 18:36:22
9/17/2009 3:58:00 PM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.

Hello, this is terrible problem, which i found in CS 6 softwares ...
solution i found only working, is uninstall and reinstall full package.. but it is not all,
you need to do BRAND NEW admin account in windows, and install it there.
that means, i could not export after repair from encoder in my original account never more (!!)   .. this is really terrible way how to repair this issue, because :
1.by reinstalling of software, client WASTE HIS TIME
2.by necessity to begin work in another windows profile you again WASTE YOUR TIME because of learning and migrating all other profile modifications, which i see really unaccpetable. Adobe means, this solution of repair is ok, and they did not do till today any steps of creating some "clever" solution.
I ask everybody, who will meet this issue in future, guys, please, complain about this situation, give "BUG Report" to them, and write "feature request" to them , in the way of creating some repair tool, which check actual "broken" connections between encoder and premiere, which refuses to "take material" from it and encode, and REPAIR it automatically..
   I am not IT, but ..does it seems so hard to create this ? Adobe IT developers should know their systems, and should create such utility tool really easy.
Steps to reproduce bug:
1. i export anything by button "queue" from premiere to Encoder
2. Encoder will start encoding
3. Encoder does not show the window of media encoding (down left )
Results: sound of sheep occur,
in encoding error file is this reason of canceling the encoding :
01/02/2014 10:10:48 AM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
History of this problem and detailed description, HOW i did "repair" this. With wasting of app 2,5 days of my working time :
1. after repairing "error 5" problem , i solved it by reinstalling the suite from the new admin user profile (profile B) .
I continued my work on my normal working windows profile . (profile A)
Every cooperation (AE+Pr, export media via "queue" to Encoder) was working fine . . .
2. suddenly it stop working (without knowing any possible reason - i did not do installations )
and showed in error export log file :
"Could not read from the source. Please check if it has moved or been deleted."
3.repair via procedure(procedure "a"):
i did this procedure on the profile B (profile from last time installation of repairing problem error 5)
I did these steps :
a-uninstall master coll suite
b-i used Adobe cleaner tool (remove ALL)
c-removed raw directories in locations
•C:\Program Files\Adobe
•C:\Program Files(x86)\Adobe
•C:\Program Files\Common Files\Adobe
•C:\Program Files(x86)\Common Files\Adobe
•C:\ProgramData\Adobe
d-removed these links from registry file
•HKEY_LOCAL_MACHINE\SOFTWARE\Adobe
•HKEY_CURRENT_USER\Software\Adobe
•HKEY_LOCAL_MACH INE\SOFTWARE\Wow6432Node\Adobe
•HKEY_CURRENT_USER \Software\Wow6432Node\Adobe
e-restarted the PC
f- newly installed the Master Coll CS6
g-update the software
result of repair of "3" : problem still exists
4.Ok i find out after coordination with support, it should have been created ANOTHER NEW admin account.
4a:so i did the same procedure (uninstalling) in profile B
4b: and then i created brand new admin profile (profile C)for INSTALLATION of software
4c: restarted the pc (and did not updated it yet)
result :
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile C) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile B) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile A) : export DOES NOT WORK ! ! !
(in profile A, is possible to export some raw video material in encoder which is imported to it via "drag and drop)
problem i see:, i have my basic profile A, which i am interested to work, because of all my directory modifications are in there..
this issue should be some "broken" connections between encoder and premiere, which refuses to "take material" from it and encode.
what i expect :
to get from Adobe some repair tool, which automatically checks these connections and repair if necessary, without necessity of founding the new profile and reinstallation of whole software.. this is madness !
what i do NOT expect from Adobe:
to get from Adobe advice of kind : you have to reinstall full software in new admin profile. sorry , we do not know the solution, because we do not know, how do behave our software.

Exported from Premiere as NTSC, but Encore thinks it's PAL - Help!

Encore 3.0.0.268
Source video: AVI, 29.97 fps, 720x480, 32kHz 16-bit stereo
Exported from Premiere Pro to Encore with the following settings:
NTSC, 720x480, 29.97 drop frame [fps], Lower, Quality 4.5
48 kHz, 16 bit, PCM
VBR, 1 Pass, Min 2.02, Target 4.78, Max 7.00 [Mbps]
But!... when I open the project in Encore, it only lists PAL options. For example, if I try adding a menu, it adds the PAL version instead of the NTSC version (which does exist in the Library folder). If I remove all the PAL menu files from the Library folder, then it doesn't list any menus at all for this project (except a couple HD ones) - ie, it's ignoring the NTSC menus.
Also, if I look at the Transcode Settings, the only choices are PAL.
NOTE: I already have NTSC set as the Default Television Standard in Encore General Preferences.
Why does Encore think the video is PAL? How can I make it think otherwise without redoing the whole export in Premiere?

See reply in
duplicate post

Using RSCRM_BAPI to convert data from Query and load into PSA to DSO

Hi Experts,
I have a complex query which is being executed in BeX.
I need to go in the reverse direction and extract the data from the Query and load into the PSA and then to a DSO.
I am using RSCRM_BAPI for this purpose and have got data into the extract table successfully.
But , my query has some variable screen wherein we need to give some inputs for selection.
I have create those Infoobjects and put them in the DSO.
How do I capture these inputs of the selection screen for storing in fields of my DSO as the Extract table does not store these inputs ???

write the whole insert query desired by you with the help of excel formulas.they are very easy or google 'how to use excel formulas".
then copy the fromula to whole set of data in excel fields.
run the insert query in excel as batch.
i hope this helps.

Adobe Dynamic Link will not work - Premiere Pro CS4 to After Effects CS4

Hello,
I am edited a video with a deadline, I'm importing a sequence from Premiere Pro CS4 to After Effects and making edits in After Effects. I'm able to import the Premiere Pro sequence into After Effects using Dynamic Link, but I go back to Premiere Pro and nothing has changed. Then I have to export the 21 minute long video in After Effects and that takes about 12 hours, that I can't afford. I don't know what I'm doing wrong, before I imported the timeline into AE, while I was in Premiere Pro I right clicked it and selected -Edit original. It took me to the .mov that I imported- since it's a redo. I learned how to use Dynamic Link from this tutorial-
http://tv.adobe.com/watch/learn-cs4-production-premium/using-dynamic-link/
At first when Dynamic link didn't work I thought it was because I was cutting the imported Sequence from Premiere Pro in After Effects becasue I was motion tracking. When you import a Premier Pro sequence can you cut it into individual layers in After Effects?

I'm importing a sequence from Premiere Pro CS4 to After Effects
That doesn't create the type of Link you want here. In this case, changes made to PP would show up in AE. You want the reverse. (And you can only go one way, not both.)
http://help.adobe.com/en_US/PremierePro/4.0/WS725e431141e7ba651172e081238226cdf5-8000.html

Dynamic Link not available from Premiere Pro CC to After Effects CC

Hey, I cant click on the Dynamic Link in Premiere pro CC and in after effects i can. how i can fix it?

Hi,
Please go to the following location and drag the Adobe Folder to the desktop,
C:\Users\<Username>\AppData\Roaming\
C:\Users\<Username>\AppData\Local\
And please Rename Adobe folder to OldAdobe in Documents.
Hope that helps
Thank you,
Mohd Naseem

Inconsistent Adobe Dynamic Link clip corruption in Premiere Pro (All CS5)

So I'm working towards having seventeen AE compositions in a video I'm cutting with Premiere. I was chugging along just fine until most, but not all, of my clips started showing this strange diagonal line business.
When I drag the timeline over the clear areas the AR comositions look fine but things cut out over the diagonal lines and when I do a render I get what looks like the AE composition minus the odd layer.
I've not deleted or moved any of the component files for the compositions, so I'm not sure what's going on here.
After some looking around the forum, I've seen it suggested that drawing from Multiple AE Projects is a bad idea - that you should have all your compositions in one AE Project to then draw from in Premiere - but have not seen any confirmation of this.
I would greatly appreciate if anyone could help me out here as this is a project I've been working on for almost a year and I'd really like to wrap it up!

Just to be clear: you still can store dynamically linked compositions in different AE projects (which might be useful when your AE projects are quite complex or you need to distribute your work across team members), just avoid incremental numbers at the end of the names.
Dynamic Link is not the best option under all circumstances, and as Craig said sometimes rendering digital intermediate is more efficient. Check this good old discussion on Dynamic Link workflow, pay attention to Todd's comments.

Export movie from Premiere for import into Encore

I created an animation in 3D Studio MAX and rendered it to sequential stills for compositing in Premiere Pro 1.5. I want to export it out so it's ready for inport into Encore 2.0. I understand that Encore compresses it to MPEG-2 format while it is building the DVD. What is the best CODEC to use exporting it OUT of Premiere to get the best quality out of Encore DVD? Do I use Adobe Media Encoder or would AVI or QT give me better quality once Encore crunches it since AVI and QT are not as compressed as MPG? If AVI or QT is better, which CODEC works best Sorenson 3, Cinepak, Indeo...? Does Encore 2.0 offer VBR 2 pass?
Also, This DVD will be primarily played off of a PC so is "Progressive" the default out of Encore or is "Interlaced" From what I read, progressive is for computers and Interlace is for TV. Is that correct?
I've been reading some of the Adobe Primers on Encoding video, wow that stuff is deep...... Some what little to deep and a little too confusing.
Thanks for your words of wisdom,
Kenn Macintosh

Personally, I would export as a movie, using the MS DV-AVI type of export. Set the Audio to PCM 16/48, unless you have bought the SurCode Dolby Digital encoder.
When you import this into Encore, it will give you much better control over where you place chapter points and additionally Encore will - if you let it - use automatic transcoding for the final MPEG-2 compresssion.
The reason I suggest this is because MPEG-2 encoding is every much an art form as the filming, editing & cutting process and major studios employ people who do nothing other than encoding. It is
i unbelievably
easy to create an MPEG-2 stream that is not DVD-Video compliant.
Don't use progressive, stick to interlaced.
Progressive scan modes open up whole cans of worms.....
Good Luck.

Why is video size different to original when exporting from Premiere Pro CS6 to Encore?

Hi there
My source files in Premiere Pro are 1920 x 1080.
When I export the sequence to Encore to burn to a DVD the size in the burned DVD changes to 720 x 576
In Encore project area I have these two entries
The encoding settings for the above two entries are
this (for the first entry above)...
and this (for the second entry above)...
It does not seem to be possible to change the encoding to 1920 x 1080 for the first enry and as such the video is being burned as 720x576.
How can I fix this? What am I doing wrong?

DVD is 720x576 you cannot change that.
If you want 1920x1080 which is HD you need to make a BluRay.
You can however make an AVCHD disk which is HD on DVD.
About 20 minutes will fit on a DVD and will only (but not all) BluRay players.

Export from Thunderbird and import into OS X Mail

Hi guys,
I'm growing tired of Thunderbird and I want to go back to OS X MAIL.
Problem is : it doesn't import properly.
Here's what I've done :
In OS X MAIL, I select IMPORT and then THUNDERBIRD and finally select the THUNDERBIRD PROFILE FOLDER in my LIBRARY.
It does work and import emails... but not all of them.
In fact, it does not import several local mail folders I have in Thunderbird.
So that's quite a big problem since i need those folders and the emails within them.
I've looked in Thunderbird for a way to export a clean file, but it doesn't seem like there's even an export feature ?
Anyway can give me a helping hand ?
Thanks !

So that's what I did.
I took the files in Library/Thunderbird / ... under my profile
I dumped the .MSF files, and renames the other files to .MBOX
Then I used the IMPORT function in OS X MAIL
It seemed to work and I was quite satisfied !
Until I double check... and realised that a LOT of emails had not been imported, for reasons that I do not quite understand...
So if you know why, please help !!!!!

Extract Data from XML and Load into table using SQL*Loader

Hi All,
We have a XML file (sample.xml) which contains credit card transaction information. We have a standard SQL*Loader control file which loads the data from a flat file and the control file code is written as position based method. Our requirement is to use this control file as per our requirement(i.e) load the data into the table from our XML file), But we need help in converting the XML to a flat file or Extract the data from the XML tags and pass the information to the control file and in turn it loads the table.
Your suggestion is highly appreciated.
Thanks in advance

Hi,
First of all go to PSA maintanance ( Where you will see PSA records ).
Goto list---> Save-> File---> Spreadsheet (Choose Radio Button)
> Give the proper file name where you want to download and then-----> Generate.
You will get ur PSA data in Excel Format.
Thanks
Mayank

Adobe dynamic link-From after effects to Premiere

I have few sequences save in different After effects versions because my project was to big to work with one final after effect version.
I would like to use Adobe dynamic link to send all the seuqences into Adobe premiere to make a "one sequence" that I could export.
But when I am using Adobe dynamique link, I need to close and open the differents versions saved in after effects.
When I do it, the sequences appear offline in Premiere.
What can I do to see all the sequences online?Do I have to work with affter effects online all the time?
Thanks a lot,
Alice

First and foremost, running After Effects is not necessary so as to be able to work with dynamically linked compositions in Premiere Pro. PrPro invokes headless version of AE in the background so as to communicate with dynamically linked comps.
Second, while working with dynamically linked compositions avoid incremental numbers at the end of your AE projects names. Better yet, avoid incremental numbers at the end of your dynamically linked comps names as well in both AE and PrPro by giving them meaning names instead of default ones. If you really need to include incremental numbers in those names, insert them somewhere in the middle. The bug related to incremental numbers at the end of the names was biting strongly in CS5.5 (don't remember if CS5 was affected as well) and was claimed as fixed in CS6.
See also this good old thread about Dynamic Link workflow: when it is wise to rely on Dynamic Link and when - on a digital intermediate. Pay attention to Todd's comments.

I can't find the adobe dynamic link to encore in premiere pro...?

New to encore and dynamic link... I'm running Premiere Pro CC and Encore CS6. When I go to send my sequence to Encore (File>Adobe Dynamic Link>..), there is no "Send to Encore" like what I've heard in seen in the tutorials... any ideas?
I've also tried to dynamic link from encore to premiere pro, but it never loads the sequence.

a workaround for the Cloud http://blogs.adobe.com/davtechtable/
-http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html
-http://tv.adobe.com/watch/davtechtable/using-premiere-pro-cc-encore-cs6-for-bluray-dvd-and -interactive-video-for-ipadatv-and-mobile-hd/

Why does my Premiere CC 2014 crash every time I use "Adobe Dynamic Link" and have After Effects CC 2014 open in the background?

Here are my MacBook Specs:
MacBook Pro (15-inch, Mid 2012)
2.6 GHz Intel Core i7
16 GB 1600 MHz DDR3
NVIDIA GeForce GT 650M 1024 MB
480 GB Solid State SATA Drive
750 GB SATA Disk
I use "Adobe Dynamic Link" mainly for typography and some animation, but not to the point where it would stress out Premiere CC 2014.

Chris,
It doesn't crash for everyone. A person could be forgiven for saying, in return, "Please sort out your **** system problems".
Trust me when I say many, many problems are caused by the computer system setup not being up to the needs of this cutting-edge graphics software. Photoshop is heavily dependent on the GPU, and GPU drivers are notorious for having bugs (they're primarily written to run games).
However, that being said, recent driver releases from both ATI and nVidia do actually work pretty well with Photoshop CC 2014.
What video card do you have?
What display driver version are you running?
If you're unsure how to tell these things, go into Photoshop, choose Help - System Info, copy the data, and post it here.
-Noel

With Adobe Dynamic Link do you have to buy a suite to be able to use it or can you buy just After Effects and Premiere?

The company I work for has me on Sony Vegas and After Effects right now. I am working on getting over to Premiere. On my personal computer I bought the suite and I have Adobe Dynamic Link and love it. My questions is since they purchased After Effects already would Adobe Dynamic Link work if they just bought Premiere.

> CS6 will only be available for purchase until May 30th and then Creative Cloud takes over completely.
That is not correct. We are still selling CS6 software for quite some time. Where did you see an indication otherwise?
Regarding Dynamic Link: In the current versions of the applications, no suite is required. For example, if you have the single-application subscriptions for both Premiere Pro CC and After Effects CC, Dynamic Link works between them. Dynamic Link is still limited to working between applications that share the same major version (i.e., CS6 with CS6, CC with CC, and so on).

Adobe Dynamic Link or Export from Premiere and load into Encore?

Similar Messages

Maybe you are looking for