Adobe elements 11

I was wondering: Is there a small manual for Adobe elements 11? And where can I get that. The normal manual is to big, I want only make slideshows with eff, music and text
Please send your answer to: [email protected]

Yes, you can install it on a maximum of two computers at the same time. Mac and/or Windows.
http://www.adobe.com/products/eulas/pdfs/Gen_WWCombined-MULTI-20111031_1230.pdf
2.1.3 Portable or Home Computer Use. Subject to the restrictions set forth in Section 2.1.4, the
primary user of the Computer on which the Software is installed under Section 2.1 (“Primary User”)
may install a second copy of the Software for his or her exclusive use on either a portable Computer
or a Computer located at his or her home, provided that the Software on the portable or home
Computer is not used at the same time as the Software on the primary Computer.

Similar Messages

I am on windows 8 platform, i used adobe elements to work on my image - the output is in dng format, how do i convert this to jpg format?

i am on windows 8 platform, i used adobe elements to work on my image - the output is in dng format, how do i convert this to jpg format?

When you make a DNG that's like making another raw file, so you will need to convert the DNG file just like your original raw. Don't use the Save button in the raw converter. That's just a link to the DNG converter. Normally you would click Open instead and then save in the editor as a jpg or other image format of your choice.

How do I use itune music for creating photo DVDs with music in adobe element 10?

How do I use/transfer itune music for DVDs with music in adobe elements premier?

On each computer:
Open iTunes. Select Preferences from the iTunes menu and click on the Advanced icon in the toolbar. At the top you will see a box showing the path to your iTunes library. Click on the Change button, navigate to the location for the library on your external drive, select it and click on the Open button. Note this permanently changes the library's location on that computer. That means you cannot access your music unless the external drive is connected.
If you don't want a permanent change, then press the OPTION key and hold it down while you launch iTunes. iTunes will then prompt you to select the library you wish to open for that session.

How do I find duplicates in Adobe Elements 8?

Like many others, I have tons of photos on my computer - many duplicates. My primary concern at this point, however, results from the fact that a cousin and I have just scanned over 1500 ancestral photos and documents, newspaper clippings, etc. from many albums we've just inherited. She numbered the photos she scanned, I named the ones I scanned. Now we find that there were many duplicates of photos between the two of us, and we would like to find those to reduce the huge number of files.
Does Adobe Elements easily locate duplicate images so those can be deleted? How about if they have different file names? Pleeeeeze tell me we can do this.
Also, does Adobe Element 8 batch re-name files, in case we want to do that in the future with these?
I'm looking at finding an easy and inexpensive (free? ) course for Adobe 8 as I haven't really used it that much yet. Some of the photos are 100+ years-old and will need some editing.
Thanks so much.
Granny K

Hi, Granny (I thought you were great in The Beverly Hillbillies)
Don't try File>>Process Multiple Files to rename if you have already imported the photos into the PSE Organizer.
There is a FAQ on how to find suspected duplicates in PSE8 Organizer. http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Find_and_delete I haven't tried this so I can't say how well it works.

Error 1935 when downloading Adobe Elements 11.

I keep getting the error 1935 message when I am downloading Adobe Elements 11 program.

Is there anything else beside the number 1935?

I cant print and get this message, "adobe elements, "the saved printer information is not compatible with this version of photoshop elements, or the saved printer is no longer available. you will need to check with your printer settings before printing."

I keep getting this message when trying to print in adobe elements, I am using a new Epson WF-3640 printer
"the saved printer information is not compatible with this version of photoshop elements, or the saved printer is no longer available. you will need to check with your printer settings before printing.

Hi,
If you are working in PSE13, please update it to latest PSE13.1 update available and see if it helps.
To apply update, you can go to Help > Updates and there you can see PSE13.1 update.
Thanks,
Anwesha

Looking for some guidance on how to splice 2 vidoes together in Adobe Elements 13.

Looking for some guidance on how to splice 2 vidoes together in Adobe Elements 13.

ScottWarnerBC
What computer operating system is your Premiere Elements 13 running on?
What do you mean by splice 2 videos together?
a. put them side by side on the Timeline and export them to one file saved to the computer hard drive or burned to disc
or
b. something like the following even before import into any Premiere Elements project
ATR Premiere Elements Troubleshooting: PE12: Seamless File Merging Before Import
If it is "a", then we need to know the properties of those 2 files so that the project settings can be set accordingly.
What is your intended export? Based on the properties of the source media, we can then decide on export settings
to produce a file with properties as close as possible to the source (if that is what you want).
We will be watching for further information.
Thanks.
ATR

"Adobe elements has stopped working."

I've received the error "Adobe elements has stopped working" and then the program closes. It has happened numerous times and now happens more and more often. Does anyone have any fixes for this?

I've been having the same problem.
Win7 64bit 8GB RAM, 500GB free hard drive space. All Win updates in place on a regular basis (last time was 2 days ago).
I often get the "stopped working" popup message on my desktop right after I close the program (well, yeah, I would hope it would stop working when I close it) and also increasingly get it on the desktop when I open the program (before the PE12 screen opens). This latter popup "stopped working" message will persist until I close the popup window, even though the program is working just fine.
The most occurrences of actual crashes seem to be when doing a lot of titles (new or editing existing), when saving, and when exporting.
For awhile it seemed (very subjectively) that rendering the project before saving or exporting possibly helped reduce the number of occurrences, but just now the "stopped working" message popped up and the program quit while I was rendering (got about 80% through).
This time I checked the "check online for a solution" box, but to no avail--there was a brief period while Windows searched online, and then the program shut down anyway.
I've tried rebooting, making sure other programs were closed, etc. but nothing really seems to have much effect. The same project will save or export just fine on one occasion, then if I so much as change a word in a title it will become unstable. The entire project is 26 minutes long. One video track (2) with titles, one main video track (1), one audio track (mostly empty) of ambient sound with the video, one sound track.
I will try Steve's suggestion of Ctrl-Alt-Shift for awhile on opening. (This helps when PSE tools freeze up.) Thanks for the tip!

IPhoto With Adobe Elements Or CS4

I'm trying to use iPhoto with Adobe Elements (and/or CS4) as my default editor.
I have the files in RAW / NEF format and I click to edit in external editor.
My goal is to save the changes I've made back into iPhoto (overwriting my old version) without saving it as an external file and reimporting it in.
I read on an IPhoto site this;
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
Unfortunately, this doesn't seem to work.
When I save the file, it saves a JPEG version in the iPhoto directory, but it doesn't show up when I go back to iPhoto. I'm also wondering why I can't save it back as a NEF file (shouldn't I do that since it's a RAW image to start)?
What's the proper way to work with iPhoto and Photoshop?
I know there are purists that seem to push to use Bridge, but i've grown to like iPhoto's features, tagging, etc. How can I do this?
Thanks..

This might be of some help:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
Click to view full size
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
Click to view full size
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 9 the Saving File preferences should be configured as shown:
Click to view full sizes
I also suggest the Maximize PSD File Compatabilty be set to Always.
In PSE’s General preference pane set the Color Picker to Apple as shown:
Click to view full size
NOTE: If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds.
OT

I just received Adobe Elements 9 and want to how to open find "Bridge" and open it.

I just received Adobe Elements 9 and want to know how to find "Bridge" and open it. How do I go about that?

I don't think PS Elements ever came with Bridge. And Elements 9 is way old. Believe current version is 11.

Load problem with Adobe Elements 11

Trying to load Adobe Elements 11 using Windows 7 and Explorer 10. It does not load but asks to try Exporer 10, dead end.

use a different browser or use ie10's compatibility mode.

How to install adobe elements on a minibook with a 1200 x 600 resolution

how to install adobe elements on a minibook with a 1200 x 600 resolution?

You don't... that is below the minimum specifications
http://www.adobe.com/products/photoshop-premiere-elements/tech-specs.html

Adobe Elements 10 Runtime error message, help!

My Adobe Elements 10 was JUST working 15 min ago, and now when I try to launch it I get this error message: "Runtime Error!" "This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information." I have re-started my computer, and have checked for updates but don't see any recent ones. What do I need to do here? I need Elements to do my work, right now.

The first thing to do when behavior suddenly changes like this is to reset the application preferences. Simply rename the preference file listed here and then retry: Preference file locations | Photoshop Elements and Premiere Elements

Reinstall Adobe Elements 9 on my new computer?

I bought a new laptop computer with Windows 8. I have Windows on my old laptop computer. How can I transfer Adobe Elements 9 to the new computer? Thank you.
Charlie H.

use your installation files to install on your new computer. you can migrate your catalogue: http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html
if you don't have your installation files and if you follow all 7 steps, you can dl a trial via one of the links on this page: http://prodesigntools.com/photoshop-elements-9-premiere-elements-9-direct-download-links.h tml
and activate with your serial number.
if you have a dl problem, you didn't follow all 7 steps. typically, failure to meticulously follow steps 1,2 and/or 3 is the problem.

Why can't I edit the entire Photomerge image in Adobe Elements 8?

This granny admittedly isn't terribly Elements "savvy". However, I managed to figure out how to scan an old 1888, 10x12 photo in two halves (left and right), and used the Elements Photomerge to combine the two shots. It worked quite well - slightly askew at the top edge, but the rest of the image appears to be well-stitched - to the naked eye, at least.
After sharpening the image, I went to Guided Edit and began using the brush to "heal" a few of the old marks on the image at full size - that worked well!. Until I moved my brush into the area that had been the left side, that is.. The brush no longer worked. Then I noted that the about 1/3 of the left side was not sharpened like the right side was, either!    To test it further, I changed it to a black & white photo.   Only that larger right section changed to black & white, and the left part of the image stayed it's old sepia color.   I saved the images, closed and re-opened Elements - but had the same results. The left side just can't be edited.
Isn't there a way to edit the entire merged image?
I've saved the image as a high-quality JPEG, and also as Adobe Elements format - but they still won't fully edit.    The two are large files - I was thinking that I'd need to save it at high-quality in order to end up with a nice retouched & sharpened 8x10, suitable for framing.    ????
Can anyone advise me as to what I might be doing or not doing to cause this?
Also, I'm running Windows 7 Home Premium, 64 bit on one laptop, and Windows 7 Professional, 64 bit on another
(I'm trying to get by with the Elements version I have, due to finances.)
Thanks a million
Grannyck

You are a gem! It worked!
I have SO much to learn, and many of the tintypes and very old photos I've recently inherited & scanned will be a good "classroom" for me.   I haven't even completely figured out what "layers" are.      (I do have an Elements 8 book; however, it helps if you know what to look up in it! LOL)
thanks again, nealeh!
grannyck

I am unable to sign into my account through Adobe Elements 12. I can sign in on Adobe's website, and through Revel online, and through my smartphone, however when I try to sign in through Adobe Elements 12 directly, the hourglass never stops turning, and

I am unable to sign into my account through Adobe Elements 12. I can sign in on Adobe's website, and through Revel online, and through my smartphone, however when I try to sign in through Adobe Elements 12 directly, the hourglass never stops turning, and turning.

Hi,
Have you tried working through this document - it does apply to Elements as well.
Sign in, activation, or connection errors | CS5.5 and later
If you still have problems you may need to contact the Adobe activation team - see the "Still need help?" link at the end of the document.
Good luck
Brian

Adobe elements 11

Similar Messages

Maybe you are looking for