Adobe Encore CS4 crashes during Render Progress

After creating entire menu without any problems ( there is occasional encore system crash...) I go to File and then Render Project. Rendering process start with rendering of my audio file and then it goes to "Rendering menu" and crashes every time! I called technical support but after couple of hours i was told to give it a rest and try call them next day... I have bought CS4 back in June 09 and it was running kinda good, I had a system crash from time to time but never a problem with rendering. Now it will not even render my old projects that I have successfully burnt in the past. I get the same error every time; " Adobe Encore has encounter an error. [..\Port\PhotoshopObject.cpp-568] " and after clicking on "continue" button Encore disappears... I have formatted my "C" drive reinstalled windows vista64, reinstalled all software downloaded "new" file from adobe and reinstalled Encore again but the problem is still there. I also read some post about encore crashes and i even deleted my nvidia dll driver but Encore crashed as usual... Does anybody have any idea how to solve this?
Thanks

Well,
it seems you have run Encore in the past succesfully (more or less) and this is the first "big stop".
I'd suggest few tips:
-have you recently update firmware, drivers of your video card or something else? If yes, I'd try the previous one, though I had to say that I'm working great with the newest beta 196.34 and my GTX 295.
- It's just a menu render matter? or everything can't be rendered? (you probably know you can render every menus/assets one by one).
Let's know
Ciao
Giorgio
P.S.; sorry for delays in answering but I have connection problem (provider), router keeps net connection but loose internet several times (has been "infected" by Bill's one?)

Similar Messages

Encore CS4 crash on render motion menus

When I first installed Encore CS4 (Windows 64-bit computer), it crashed every time I rendered my motion menus. I found a thread on this forum from 2009 that discussed this issue, and installed the Roxio patch (or whatever it was called)--that was the recommended solution. After that, render motion menus worked fine so I thought the problem was fixed.
But over the past few weeks, it has started happening again--intermittently at first. But today, every time I go to render a motion menu--with different PSD and MPEG-2 files--it crashes every single time. I am beyond frustrated.
What should I do? Since Encore has rendered motion menus fine for the past few months for me, I'm doubting that it's the Roxio issue. I read somewhere that profiles can get corrupted and can be reset. But I have no idea how to do that. So before I start screwing around with stuff, I figured I would come here and see if anyone has any ideas for me.
Thanks for your help.

Here's what I might try.
Start new project (probably after restarting my machine for good measure).
Open a library menu with motion.
Render. Does that work?
If so, I'd look a bit harder at the motion assets. Try an old project that worked, and bring those assets into a new project for motion.
I'd try reinstallng the roxio patch, if it fixed this before. (I don't think was what it was intended to fix, but I wouldn't argue.)
If none of that works, I'd consider a repair install. See number 1 here:
http://kb2.adobe.com/cps/408/kb408826.html

Adobe Encore CS4 Crush during building

When I am building the proyect, Encore crush. It crush when the program is "moving" the video, and when I check the proyect, a deleted menu appears as an orphan menu, and 2 timelines has no "end actions" but I have check it and both has the end action set.
What can I do or where is the prblem??
This is the first time I use Encore. so please be nice to my

Even if you have a later version, this is a good book to learn Encore
http://www.amazon.com/Focal-Easy-Guide-Adobe-Encore/dp/0240520041/ref=sr_1_1?ie=UTF8&s=boo ks&qid=1277266925
NEVER use Overrides http://forums.adobe.com/thread/860691?tstart=0
Odd Errors http://forums.adobe.com/thread/670174?tstart=0
For CS4 you must update the Roxio component http://forums.adobe.com/thread/400484?tstart=0
More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
As well as the below, right click the Encore icon and select Run as Administrator... which is NOT the same thing as running the computer with the Administrator account... and which fixes several "odd" problems
Run as Administrator http://forums.adobe.com/thread/771202?tstart=0
Long File Names or odd characters cause problems
Read http://forums.adobe.com/thread/588273
And #4 http://forums.adobe.com/thread/666558?tstart=0
And This Message Thread http://forums.adobe.com/thread/665641?tstart=0
The individual CS5 pages also have links to the CS4 user guide pages
CS5 User Guides - online and PDF (see link in upper right corner at individual pages)
http://blogs.adobe.com/premiereprotraining/2010/08/help-documents-for-creative-suite-5-pdf -and-html.html

Adobe Encore CS4 crashes when starting

When I try to start Encore it fails to start and produces a crash report. It does not even get to the splash screen. Has any one ever had this issue?

Hello Bill,
I have looked at the event viewer and there is nothing in there that points to issues that could cause what appears to be a corrupt file/directory.
I have now had the same happen to soundbooth. I could not start soundbooth. I then renamed the directory: C:\Documents and Settings\UserName\Application Data\Adobe\Adobe Soundbooth\2.0 to C:\Documents and Settings\UserName\Application Data\Adobe\Adobe Soundbooth\2.0_Old. I later deleted the library.
Again Soundbooth now works.
I still do not know what caused the problem.
Anyone any idea what is happening?

Encore CS4 crashes during build

I have a Blu-ray project setup in Encore. I've burned many versions of it to a BD Folder and also a BD-RE disc. Worked fine. But then Encore crashed. Now I can open the file but everytime I check the project or burn to a folder or a disc it crashes. Too much work to rebuild the project with subtitles so I am hoping for a workaround. I've seen lots of old (and mostly PC - I'm on a MAC) CS3 references to the same problem.
Oh, and by the way Adobe (if you're listening). It would be easy to rebuild the project if you could copy and paste subtitle tracks. You can copy and paste just about everything you do on a computer, but for some reason subtitle tracks are set in stone.
And I'm on a Mac Pro, Snow Leopard (and yes, I've built a disc since installing the upgrade), 4gb of RAM and an internal Apple RAID 5 hard drive array.

Thanks. Good advice, but already tried with no success. I thought that was for sure the problem. Here is that last ditch effort to find out what caused this to avoid it in the future. I had 10 timelines, all with subtitles. I needed those subtitles exported so I could rebuild a new project. I right clicked the subtitle track in each of the timelines and exported it as a txt file. It worked for 9 or the 10. On the 10th, it crashed as soon as I right clicked in the timeline. So I went a step further to isolate it. I trashed all the timelines except the problem one. within that timeline I deleted the audio and video so it is just the subtitle track. I deleted all my video and audio assets. So my project is now just a single timeline with only a subtitle track. I trashed the cache and reopened and still it crashes when I right click in the subtitle track.
I managed to rebuild the project successfully. This time I imported .mov movies rather than the transcoded files from Adobe Media Encoder. I decided maybe it was better to let Encore do the transcoding (this is for a Blu-ray project by the way). Anyway, it all works fine now.
My history with Encore on the Mac is that it is very unstable. I have to save a lot because you never know when it will crash. This goes back to CS3 as well.

Encore CS4 crashes under Windows 7

Jeff – I hope this email method of getting a forum message up does work, as currently it’s impossible to sign in to the forums (just get an endless loop of flashing screens about signing in to the forums – great)
Anyway, I’m still trying to get CS2 up and running, and all I’m seeing is silly attempts by support and no progress since July.
My original case on this (#211070010) had the following action: 6th Aug I was sent a copy of CS4, which is useless as it can’t open my CS2 projects, which I reported. Then about 15th August I was asked if the CS2 fix I’d been sent had worked. Since I hadn’t been sent anything I said ‘no’ and the case was then closed!
Then a new case (#184634426) was opened, and Support contacted me to ask what the problem was(!). They then took over my PC one night and proved to themselves that CS4 didn’t work. They then downloaded Creative Suite CS3 to try Encore CS3 – the theory being that if CS3 could open CS2 projects, it could maybe save them in a format CS4 could open. Great idea, but what they installed was useless as Encore CS3 is in Production Suite, not Creative Suite. When they found that out, they gave up and disappeared and I’ve never seen them since, despite telling them they were looking in the wrong install package.
Anyway, I downloaded the right package, thinking I could try Encore CS3 on a 30-day trial, and if their theory worked, then good. If not I’m back to square 1 again. BUT, even though I’ve said I want a 30-day trial, the stupid CS3 installer still wants a serial number, which I obviously don’t have.
So here we are again – 3 months down the track, a case open for over a month, nothing happening, and no end in sight.

Jeff,
Encore CS4 crashes when I try and open Encore 2.0 projects with a meaningless error message that doesn’t tell me why it is crashing or how to fix the project to make it open it. And nobody can explain what the error message means or why it happens, so I have no clues as to how to address the problem. I have used Encore CS4 to try and open all my old projects and basically if it’s a Premiere-only output file its happy, but if it’s an Encore-only built ‘slideshow’ project it will crash. Which means most of my projects won’t open.
I have also tried all the Adobe published tricks to fix ‘bad’ projects, which can change the error message to ‘Proxy stream does not support requested functionality’, which is also meaningless and no one can tell me what I should then do to address the underlying issue.
Encore CS3 may or may not work – I don’t know, as I can’t get it past asking for a serial number, even though I just want a 30-day test period to see if it can re-save the project to improve things for CS4
Encore DVD used to run fine before this stupid re-registering issue happened.
All this is on Windows 7 (yes, I know 2.0 isn’t ‘approved’ for Win7, but as I and many others have found, it runs fine).
I really don’t know why Adobe doesn’t just send us RegEdit instructions to turn on or off the bit that says ‘this program is registered’ and then we could all stop bothering you – it would be a much much simpler and cheaper fix for all of us, Adobe included, than all this farting around.
Don

Adobe Flash cs4 crashes alot?

Well im experiencing that my Adobe Flash cs4 crashes alot. I worked on it for about 7 today, and during this time it crashed about 5 times. Mostly of those times where when I was programming a bit of as3.
Is it normal that it crashes so often, or might it just be my computer? My computer aint to bad, and should be easy to handle Adobe Flash cs4 easily.
Greetings,
Coyke

Well im working on the same animation for the whole time, the flash document is around 1mb now and my swf movie 116kb. Which aren't to big in my opinion.
My computer is:
Processor:
Intel(R) Pentium(R) Dual CPU E2220 @ 2.40GHz (2 CPUs)
Memory:
2048MB RAM
Hard Drive:
160GB
Video Card:
NVIDIA GeForce 8400GS
Monitor:
Philips 22" 220CW9FB 2MS
Mouse:
Logitech LX6 Cordless Optical Mouse
Operating System:
Windows XP Home Edition Service Pack 3
I just updated to 10.0.2 five minutes ago, and ill check out this afternoon how it works.
Thanks for the help jdehaan!
Whether this was the solution or not ill let you guys know!
Greetings,
Coyke

System Error:ADS :com.adobe processingException:XMLFM Exception during render Exception

Dear All, We have configured ADS in DEV and QAS it is working fine. We have done the same configuration in PRD but it is giving the following error when we execute the program FP_CHECK_DESTINATION_SERVICE: SYSTEM ERROR: ADS: com.adobe.ProcessingException: com.adobe.ProcessingException: XMLFM Exception during render: org.omg.CORBA.COMM_FAILURE(200,101). Exception of class CX_FP_RUNTIME_INTERNAL System Info : SAP ECC EHP6 SAP NW 7.31 Kindly suggest some solution. Regards, Mustafa

HI
Note 944221 - Troubleshooting if problems occur in forms processing
Note 717568 - FPRUNX001, 002 or 004 with output of PDF-based forms
Note "959462 - ISR/Adobe/Web Dynpro Java: Configuration problems"
Note 1288500 - HR-RU: ADS: XMLFM Exception-P(200101) message no.FPRUNX001
Note 1143442 - Shift report: Error "ADS: XMLFM Exception"
AND YOU CAN CHACK AGAINST FOLLOWING Problem:
1). Check the JCO RFC from Java to ABAP server.
2). Check the ADS connection in SM59.
Check the document more troubleshooting steps
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30ec0508-9438-2c10-f393-a41fb255698d?QuickLink=index&overridelayout=true
http://forums.sdn.sap.com/thread.jspa?threadID=842415

Donde descargo el adobe encore cs4

donde descargo el adobe encore cs4
necesito el instalador de adobe encore cs4 o la suite adobe cs4, no qiero portables

Este es un foro de usuarios de productos Adobe en las páginas de la propia Adobe,
Por lo que me parece que es el sitio menos indicado para solicitudes ilegales como la tuya.
Eso se llama piratería.

Adobe Encore CS4 - Encore Failed

I recently had a problem with Adobe Encore CS4 with finalising a project to DVD, and to make a long story short I had my computer totally wiped and reinstalled all programs.The problem I now have is, I export a HDV file from Avid Media Cmposer and import it to Encore but when I try to Transcode it, I get a "Encode Failed" message.
I have tried other formats "Quick Time Movie" and "Quick Time Reference" which works fine, but I get a colour burst in the video which is not in the original footage and it only appears in Encore.
I appreciate any help to solve this problem.

For CS4 you must update the Roxio component http://forums.adobe.com/thread/1309029
http://corel.force.com/roxio/articles/en_US/Master_Article/000012592-PX-Engine-Description -and-Download

Adobe Encore CS4

My adobe Encore CS4 d'ont work - It blocks at Initializing Transcoding!

Make sure you run as administrator.
If that does not do it, give us a bit more info: what operating system? Has it worked before on this system? Did anything change?
Run as administrator:
From John Smith:
Right click the Encore icon on your desktop
Select Properties
Shortcut tab
Select Advanced
Click the Run as Admin option
Click OK
Click OK
To set it to run like this all the time, see post 1 here:
http://forums.adobe.com/thread/969395

Will Adobe Encore CS4 burn MTS files to an external blue ray burner if I buy one?

Will Adobe Encore CS4 recognize/burn MTS files to an EXTERNAL blue ray burner if I buy one?

Internal vs external should not matter.
I have a burned to external with CS4, but it was a long time ago.
And most importantly, Encore is not a reliable burner for many users, and they, and I, use imgBurn rather than Encore to burn.
Also, "burn an MTS" file is totally different from authoring and burning. Encore (was it by CS4?) added a limited AVCHD passthrough option. I have not used it.

FCP6 keeps crashing during Render or if I try to export QuickTime.

Hey guys,
FCP6 keeps crashing during Render or if I try to export QuickTime.
Here's what I have:
iMac 24" intel 3.06GHZ/ 6GB RAM/ 512 VRAM
Canon T2i 1080p/24 footage (44min)
Using External drive for Scratch Disk. (Plenty of space available)
Can anyone help with this issue?
Thanks in advance,
CJ

Did you convert this footage to ProRes, or just drag the H.264 files the camera shoots directly into FCP and start editing those? I'm guessing you didn't convert, thus why you are having this problem, and thus why we highly recommend people convert the footage to ProRes.
H.264 is not an editing codec.
Shane

Adobe After Effects CS4 Crashes During Startup

Hey I have a major problem i think.. after I installed AAE CS4 I picked the trial to see how it was b4 i bought it. Once everything was installed and complete I restarted my computer but when I went to open the program it pulled the grey aae startup box. It had 4% complete and said Initializing Media Core then it just stops and minutes later crashes with not progress. It continually does it with no improvement. Anybody that can help me?

I did all of the above:
- 9.03 update
-   1. Go go Control Panel -> System-> Advance System settings
     2. Click Advanced tab, Performance -> Setting
     3. Click Data Execution Prevention -> Turn on DEP for all programs except those I select - > Here you click Browse and choose where your AE CS4 location is, and click Apply -> OK .
- Run as administrator
Nothing worked. I still get the crash at start-up with the message
<960> <AppDirs> <5> Required Dir=
C:\ProgramFiles\Adobe\Adobe After Effects CS4\Support Files\Required.
and after that sorry, AE can'r continue..
Help me please, I have the 30 days trial and I desperately need to learn how this program works for a project. After that I want to buy it.
My system is 32bit Vista Windows, I installed AE CS4 (that's the last one to run on 32bit right?) and did an update to 9.03.

ENCORE CS4 Crashing Computer??

My ENCORE CS4 is crashing the computer each
time I send a rendered project to it from Premier CS3 or CS4. I have installed the Production Suite two times in hopes of fixing the issue. Nope!
Any suggestions, Please...
Also does any one who may read this Post have a suggestion for a 3rd party software OR hardware which will allow Premier to process HDV in and out from a SONY HDV camera product??? Right now, all inputs; both DV and HDV default to DV on Capture from a 1080i/60 input.
Advanced Thanks,
Larry

http://forums.adobe.com/community/encore
all inputs; both DV and HDV default to DV on Capture from a 1080i/60 input.
Here's the thing. Premiere has no ability to convert during Firewire capture. It's a straight bit for bit transfer from tape to hard drive. So if Premiere is only capturing DV, then either the media on tape actually IS DV, or the camera is set to downconvert to DV.

Adobe Encore CS4 crashes during Render Progress

Similar Messages

Maybe you are looking for