Adobe Encore CS4 File is not valid MPEG?

Hi!
Today, I opened up my Encore project to make a small change. I imported new assets and changed the menu to something different and then linked my buttons to a new timeline that then linked to another timeline.
I planned to create a DVD, but while it was transcoding and error popped up that said "Adobe Encore File is not valid MPEG."
All of my assets are in MPEG2-DVD format. The menu (both the original menu and the new one) was a video created in After Effects CS4 and the other assets were created in Premiere Pro CS4.
Both the menu and video are 720x480.
Thanks,
Brittany

Um, I'm not exactly sure how to find this, but I just right clicked on the video to click properties and this is what I found:
Menu:
Data Rate: 6455kbps
Menu Audio Bit Rate: 1536kbps
Second Part of Menu: (I have it set up so that it when you click "Play" or "Behind the Scenes" that it looks like the camera zooms into the title on the menu. This is in a seperate timeline.)
Data Rate: 6000kbps
Audio Bit Rate: 1536kbps
Main Video:
Data Rate: 7000kbps
Audio Bit Rate: 1536kbps
Also, I don't know if this is worth mentioning, but .xmp and .m2v.xmpses files also rendered along with my MPEG2-DVD video. I guess this is standard but I just thought I should mention it.

Similar Messages

'file is not valid mpeg' runtime error while building

I have imported a series of files exported from Premiere Pro 2.0 into Encore, which lists them as 'do not transcode' on the project window. Running a project check doesn't find any problems, yet when I try to build the DVD, either directly to disk or to a folder on the HD, I get the above message. This happens at about 1/3rd of the process, but doesn't tell me which one of the files isn't a valid mpeg.
This is most annoying, as there are nearly 20 smallish clips in the project, if I know which file is supposed to be 'not valid' I could re-export it.
Any ideas?
Many thanks

But then would i have to re edit the dvd menu?
Casey,
You are loosing me here. If you are only replacing the Video Asset, the Menu should not figure into the equation.
The exact steps that you are using to replace that Asset in En could well hold the key. These steps can be very important.
Since you have done the Encore Project before, with other Assets, have you flushed your Media Cache in En? That would be my first step.
Now, are you trying to Import maybe a 16:9 Asset into a 4:3 En Project? That could spell trouble.
Good luck,
Hunt

Will Adobe Encore CS4 burn MTS files to an external blue ray burner if I buy one?

Will Adobe Encore CS4 recognize/burn MTS files to an EXTERNAL blue ray burner if I buy one?

Internal vs external should not matter.
I have a burned to external with CS4, but it was a long time ago.
And most importantly, Encore is not a reliable burner for many users, and they, and I, use imgBurn rather than Encore to burn.
Also, "burn an MTS" file is totally different from authoring and burning. Encore (was it by CS4?) added a limited AVCHD passthrough option. I have not used it.

I am receiving an error message that my Adobe Captivate zip file is not a valid SCORM, AICC or IMS Content Package. What am I doing wrong?

I am receiving an error message that my Adobe Captivate zip file is not a valid SCORM, AICC or IMS Content Package. This zip file has been published identically to my previous zip files. What am I doing wrong?

First, go back into the CPTX source file and check that LMS reporting is indeed turned on and that it is set to SCORM etc.
If that is OK. Republish and use the Zip option in the Captivate Publish dialog settings to zip the file. Don't zip it yourself.
If your LMS still rejects this zip file, upload to SCORM Cloud and see if it rejects it too.

Windows CS4 files will not open on the Mac

How come Windows CS4 files will not open on the Mac version?
Kevin

MCR wrote:
Where are you getting your info from as I have personally opened a Windows After Effects project on the Mac many times!
Anyway Adobe state they are cross platform so this is pretty missleading !
MCR, you asked in your previous post:
"Is that true of all CS4 project files like Premiere Pro and After Effects?"
I answered:
"No."
Which means After Effects and Premiere project files are cross-platform. But Encore projects are not cross-platform.
Is that clearer?
Regarding your last sentence, if you're referring to AE and PPro files, that is true. But it is not true of Encore project files.

Adobe Encore CS4 - Encore Failed

I recently had a problem with Adobe Encore CS4 with finalising a project to DVD, and to make a long story short I had my computer totally wiped and reinstalled all programs.The problem I now have is, I export a HDV file from Avid Media Cmposer and import it to Encore but when I try to Transcode it, I get a "Encode Failed" message.
I have tried other formats "Quick Time Movie" and "Quick Time Reference" which works fine, but I get a colour burst in the video which is not in the original footage and it only appears in Encore.
I appreciate any help to solve this problem.

For CS4 you must update the Roxio component http://forums.adobe.com/thread/1309029
http://corel.force.com/roxio/articles/en_US/Master_Article/000012592-PX-Engine-Description -and-Download

Adobe Encore CS4

My adobe Encore CS4 d'ont work - It blocks at Initializing Transcoding!

Make sure you run as administrator.
If that does not do it, give us a bit more info: what operating system? Has it worked before on this system? Did anything change?
Run as administrator:
From John Smith:
Right click the Encore icon on your desktop
Select Properties
Shortcut tab
Select Advanced
Click the Run as Admin option
Click OK
Click OK
To set it to run like this all the time, see post 1 here:
http://forums.adobe.com/thread/969395

WSDL URL is invalid or the WSDL file is not valid or incorrect

Hi All,
I am using Oracle Soa Suite 11g. I have got Oracle database, Oracle weblogic admin server, Oracle SOA server all installed on my laptop.
I have deployed a sample BPEL process. When I am trying to test the process it is giving an error
"Either the WSDL URL is invalid or the WSDL file is not valid or incorrect. - WSDLException: faultCode=PARSER_ERROR: Failed to read wsdl file at: "http://KSNPavan-PC:8001/soa-infra/services/default/MyHumanWorkFlowSample1Project/vacationrequestprocess_client_ep?WSDL", caused by: java.net.ConnectException. : java.net.ConnectException: Connection refused: connect "
Now, when I change the url address to
"http://localhost:8001/soa-infra/services/default/MyHumanWorkFlowSample1Project/vacationrequestprocess_client_ep?WSDL"
(Please note the difference in host name from KSNPavan-PC to localhost.)
and click parse wsdl it is working well. I mean the test page is opening successfully and I am able to test the service.
Testing the service from admin console is fine. Now I want to use this BPEL process service in another BPEL process. So, when I am piciking this service wsdl in JDeveloper it is throwing me the same error and I am unable to go ahead.
Can anyone please tell me whetherI have to set property in the admin server console so that it always take local host in all the wsdl urls and solve my problem.
Thank you,
KSN Pavan.

Hi All,
My problem has got solved with the help of my colleagues. Actually the problem was that the host name KSNPavan-PC is not there in the C:\Windows\System32\Drivers\etc\hosts file. I Added the host name in the file with the IP same as that of local host and everything isworking well now.
Thank you,
KSN Pavan

Either the WSDL URL is invalid or the WSDL file is not valid or incorrect.

Hi ,
i deployed one bpel process in weblogic.
when i am click on test below is error is coming. ( its on oracle soa 11)
below is coming for all the process. previously it is working fine.
Either the WSDL URL is invalid or the WSDL file is not valid or incorrect. - WSDLException: faultCode=OTHER_ERROR: Failed to read WSDL from http://xxxx:8001/soa-infra/services/default/ReadJMS/readtraxjms_client_ep?WSDL: HTTP connection error code is 503
Please help me how it is resolved.
Regards
jan

Hi Jan,
We had the same issue in 11.1.1.3 and we used to restart the server to fix it. Hopefully before going to PROD we upgraded to 11.1.1.5 and next time we saw this issue was only when there was some problem with the OHS (it was down etc.).
Which version you're on?
Regards,
Neeraj Sehgal

The setting ExternalProxy in the Web.Config file was not valid.

Since installing Exchange 2010 SP1 (Upgrade from RTM) I get this in the event viewer.
The setting ExternalProxy in the Web.Config file was not valid. The previous value was null and has been changed to .
Any ideas what to check?

I'm also getting a number of these errors on Exchange 2010 SP1 RU1, the settings that I get notified include (the values have been changed to a number of diferent values):
ExternalProxy
BootstrapMailDeliveryDelay
MobileUpdateInformationURL
BootstrapCABForWM61HostingURL
FullServerVersion
ADCacheMaxOrgCount
ADCacheExpirationTimeout
MaxDocumentDataSize
MaxDocumentLibrarySearchResults
MaxGALSearchResults
BadItemEmailToText
BadItemIncludeEmailToText
BadItemIncludeStackTrace
MaxClientSentBadItems
MailboxSearchTimeoutNoContentIndexing
MailboxSearchTimeout
MaxMailboxSearchResults
MaxRequestsQueued
MaxWorkerThreadsPerProc
MaxCollectionsToLog
ProxyConnectionPoolConnectionLimit
ProxyHandlerShortTimeout
ProxyHandlerLongTimeout
BackOffErrorWindow
BackOffTimeOut
BackOffThreshold
ProxyVirtualDirectory
BlockLegacyMailboxes
BlockNewMailboxes
SchemaValidate
SchemaDirectory
SyncLogDirectory
SyncLogEnabled
DisableCaching
DeviceClassCacheADCleanupInterval
DeviceClassPerOrgMaxADCount
DeviceClassCachePerOrgRefreshInterval
DeviceClassCacheMaxADUploadCount
DeviceClassCacheMaxStartDelay
MaxWindowSize
MaxRetrievedItems
EventQueuePollingInterval
ADCacheRefreshInterval
MaxSizeOfMailboxLog
NumOfQueuedMailboxLogEntries
MaxNumOfFolders
Can these be resolved in a similar manner. Some additional information would be great (as sjoegarrett I can also ignore them, but would prefer if these could be eliminated).

RD Client and RDWeb 2012 - RDP file is not valid when run from chrome browser on Android

After signing into the RDWeb using Android Chrome, I see the published remoteapp. If I click to
run remoteapp, it tries to open the RDP file with the installed RD Client but I got this error "Import Error - The RDP file is not valid. Notify your network administrator."
I have google about this error. One of the forum suggest to use RD client remote resources tab to access the apps but in our environment our user want to use their
own web browser to access the apps. Is there any way we can solve this issue?.

Hi,
I’m afraid that we have to configure Remote Resource.
Thanks for your understanding.
Jeremy Wu
TechNet Community Support

Donde descargo el adobe encore cs4

donde descargo el adobe encore cs4
necesito el instalador de adobe encore cs4 o la suite adobe cs4, no qiero portables

Este es un foro de usuarios de productos Adobe en las páginas de la propia Adobe,
Por lo que me parece que es el sitio menos indicado para solicitudes ilegales como la tuya.
Eso se llama piratería.

Hi, I currently have iTunes version 10.4 loaded on my windows desktop. I'm trying to download version 10.6 but have been unsuccessful. My system saying that current iTunes.msi file is not valid. What can I do?

Hi, I currently have iTunes version 10.4 loaded on my windows desktop. I'm trying to download version 10.6 but have been unsuccessful. My system saying that current iTunes.msi file is not valid. What can I do?

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Encore says file is not mpeg - Media Encoder says it is! Help please.

Hi,
This is all about the "file is not a valid mpeg" error.
I'm using Encore 5 to author a DVD, with elements produced in Premiere 4, After Effects 4 and Soundbooth 5.
Video has gone through Media Encoder 4 and audio through Media Encoder 5.
Video is m2v and audio is ac3. There are not other formats.
Check Project gives no errors on anything.
When it comes to authoring the DVD, 4.67 gb have been used leaving 24MB free disc space.
The first few times I tried to author the DVD, after initially reporting no errors, it then wouldn't burn a disc because it said one of the timelines used audio files of different formats. It didn't, but I put them through Media Encoder again anyway, which seemd to solve that problem, but who knows.
(In the DVD Transcode Status, in the Project window, most ac3 files say Don't Transcode, but the three smallest - less than 1MB - say Transcoded [then Automatic in DVD Transcoding Settings]. Don't know why it does that or if that has anything to do with the authoring problem.)
Anyway, now, every time I click Build, it works for a while but then gives "file is not a valid mpeg" error and stops. Doesn't say which file. ALL the files are mpegII.
It will take me days to re-render all the files. Is there any way to find out which is the problem file - it doesn't do anything useful like tell you - or any reason why it isn't recognizing an m2v file which I can do something about, please?
This is driving me crazy. Any advice will be much appreciated.
Thanks in advance,
Steve

I have never mixed different Bit-Rate materials, on the same Timeline, and especially as I usually do one Timeline for each Video Asset (edited to be a "scene," or Chapter). I cannot tell you.
What happens if you create one Timeline for one Asset, and then another for the remaining one?
Does that change anything?
I had been thinking that you had an MPEG that was out of the DVD-spec., but that usually results in Encore needing to Transcode again, to bring the file into spec.
Good luck, and I wish that I knew more about mixing Assets with differing Bit-Rates.
Hunt

Adobe Encore CS4 crashes during Render Progress

After creating entire menu without any problems ( there is occasional encore system crash...) I go to File and then Render Project. Rendering process start with rendering of my audio file and then it goes to "Rendering menu" and crashes every time! I called technical support but after couple of hours i was told to give it a rest and try call them next day... I have bought CS4 back in June 09 and it was running kinda good, I had a system crash from time to time but never a problem with rendering. Now it will not even render my old projects that I have successfully burnt in the past. I get the same error every time; " Adobe Encore has encounter an error. [..\Port\PhotoshopObject.cpp-568] " and after clicking on "continue" button Encore disappears... I have formatted my "C" drive reinstalled windows vista64, reinstalled all software downloaded "new" file from adobe and reinstalled Encore again but the problem is still there. I also read some post about encore crashes and i even deleted my nvidia dll driver but Encore crashed as usual... Does anybody have any idea how to solve this?
Thanks

Well,
it seems you have run Encore in the past succesfully (more or less) and this is the first "big stop".
I'd suggest few tips:
-have you recently update firmware, drivers of your video card or something else? If yes, I'd try the previous one, though I had to say that I'm working great with the newest beta 196.34 and my GTX 295.
- It's just a menu render matter? or everything can't be rendered? (you probably know you can render every menus/assets one by one).
Let's know
Ciao
Giorgio
P.S.; sorry for delays in answering but I have connection problem (provider), router keeps net connection but loose internet several times (has been "infected" by Bill's one?)

Adobe Encore CS4 File is not valid MPEG?

Similar Messages

Maybe you are looking for