Adobe Encore CS4 unter Windows 7 Problem mit Einlesen von HD Material

Hallo zusammen,
habe seit kurzem Windows 7 Ultimate 64bit auf einem zweiten System und teste CS4. Läuft so weit ganz stabil und bei HD deutlich schneller in der Verarbeitung. Wollte mich dann an das Authoring machen und mit Encore ein Bluray Projekt anlegen. Beim Einlesen des HD Materials getrennt nach m2v und ac3 ist bei 99% einlesen der m2v Datei das System komplett eingefroren und machte einen Kaltstart von nöten. Das habe ich nun dreimal probiert und immer wieder das Gleiche! Bin dann um weiter zukommen wieder auf XP und da gibts keine Probs.
Habe in dem englischen Foren viele Berichte von Probs mit W7 64bit gelesen und insbesonder mit Encore jedoch keinen Lösungsansatz finden können!
Hat hier jemand ähnliche Erfahrung mit Encore unter W7 64????

nAbend,
hast das hier auch schon probiert?
http://forums.adobe.com/thread/400484
Gruß
Christoph

Similar Messages

No funciona adobe encore CS4 con windows 7

Hola amigos: ya solucioné el tema con photoshop y premiere. Me sigue quedando el adobe encore que no quiere arrancar con el windows 7 instalado. Me dice que hay problema de incompatibilidad. ¿Alquien tiene la solución?. Desde ya muy agradecido. Javier.-

Te importaría compartir con los demás que visitan estos foros, tu solución para que versiones anteriores de Photoshop y Premiere funcionen en Windows 7?
Gracias

Adobe Acrobat CS4 unter Windows 7 x64 als PDF drucken

Hallo,
habe im Moment Probleme ein Wordfile als PDF zu drucken. Bekomme folgendes Log
%%[ ProductName: Distiller ]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: xshow ]%%
Stack:
[271 216 365 125 246 99 302 100 357 234 246 125 147 234 183 124 247 0]
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
Kann mir jemand helfen? Danke

Das verstehe ich ja auch nicht, warum es unter Win 7 nicht funktionieren sollte. Derzeit sehe ich nur das Adobe-Symbol.
Was meinst du mit anknipsen ? Das meine pdf's vorschaugerecht sind habe ich ja unter XP gesehen.
(bin ca. vor 3 Wochen von XP auf 7 umgestiegen)
Gibt es vielleicht ein manuelles Eingreifen (Registry-Eintragsänderung, ...).
Von welchem Programm kommen eigentlich die pdf Ansichten von 7 oder von Acrobat ?
Vielen Dank für eure Mühe.
Liebe Grüsse
Brigitte

Datenzusammenführung Indesign CS6 unter Windows - Problem mit leeren Feldern beim Import von Excel 2007

Hallo,
versuche verzweifelt aus einer Exceltabelle mit ca. 10 Spalten einen kleinen Katalog zu generieren. Klappt soweit auch. Nur wenn in einem Feld keine Angaben sind, weil es dort z.B. kein Attribut gibt, verweigert Indesign den Import. Es kommt dann folgende Fehlermeldung:
Adobe InDesign
Die ausgewählte Datenquelle hat mindestens einen leeren Feldnamen. Reparieren Sie die Datei oder wählen Sie eine andere Datei aus.
OK
Kann mir da jemand helfen?
VG Charlie

Mach'n geschützen Umbruch oder irgendein anderes unsichtbares Sonderzeichen rein oder nimm eben irgend 'ne spezielel Zeichenkombination, die du dann in ID mit Suchen und Ersetzen schnell rausschmeißen kannst...
Mylenium

Adobe Encore CS4 - Encore Failed

I recently had a problem with Adobe Encore CS4 with finalising a project to DVD, and to make a long story short I had my computer totally wiped and reinstalled all programs.The problem I now have is, I export a HDV file from Avid Media Cmposer and import it to Encore but when I try to Transcode it, I get a "Encode Failed" message.
I have tried other formats "Quick Time Movie" and "Quick Time Reference" which works fine, but I get a colour burst in the video which is not in the original footage and it only appears in Encore.
I appreciate any help to solve this problem.

For CS4 you must update the Roxio component http://forums.adobe.com/thread/1309029
http://corel.force.com/roxio/articles/en_US/Master_Article/000012592-PX-Engine-Description -and-Download

Problème de compatibilité de Abode Encore CS4 avec Windows 7

Bonjour,
J'ai téléchargé la version d'evaluation de Adobe Première Pros CS4 sur un PC avec Windows 7 Edition Familiale Premium, lorsque je veux ouvrir Adobe Encore CS4 j'ai le message ci dessus.
Je ne trouve pas de solution.
Avant d'acheter ce logiciel je voudrais savoir s'il tourne sur Windows 7.
Ghernan83

Hello,
Thank you for your responses.
Ghernan83

Donde descargo el adobe encore cs4

donde descargo el adobe encore cs4
necesito el instalador de adobe encore cs4 o la suite adobe cs4, no qiero portables

Este es un foro de usuarios de productos Adobe en las páginas de la propia Adobe,
Por lo que me parece que es el sitio menos indicado para solicitudes ilegales como la tuya.
Eso se llama piratería.

Adobe Encore CS4

My adobe Encore CS4 d'ont work - It blocks at Initializing Transcoding!

Make sure you run as administrator.
If that does not do it, give us a bit more info: what operating system? Has it worked before on this system? Did anything change?
Run as administrator:
From John Smith:
Right click the Encore icon on your desktop
Select Properties
Shortcut tab
Select Advanced
Click the Run as Admin option
Click OK
Click OK
To set it to run like this all the time, see post 1 here:
http://forums.adobe.com/thread/969395

Will Adobe Encore CS4 burn MTS files to an external blue ray burner if I buy one?

Will Adobe Encore CS4 recognize/burn MTS files to an EXTERNAL blue ray burner if I buy one?

Internal vs external should not matter.
I have a burned to external with CS4, but it was a long time ago.
And most importantly, Encore is not a reliable burner for many users, and they, and I, use imgBurn rather than Encore to burn.
Also, "burn an MTS" file is totally different from authoring and burning. Encore (was it by CS4?) added a limited AVCHD passthrough option. I have not used it.

Problem with Encore CS4 (and Windows 7, possibly)

Greetings:
Anybody else having this problem? First I'll get my system blood work out of the way. It's a brand new HP Pavillion.
Windows 7 Home Premium (64 bit)
8GB RAM
Over 700GB of FREE harddrive
Intel Core 2 Quad Q8300 @ 2.5 GHz
Video Chip Set: Intel G45/G43 Express Chipset
I have ensured that everything is updated. This includes:
All CS4 Applications
Windows 7
My Graphics Card Driver
My Display Driver
I have also updated the Roxio PX Engine to V4.18.16a. I had read on a forum that Encore uses this driver and it should be up to date.
OK, the problem, which I can reproduce with the simplest Encore project:
1.     Start Encore
2.     Create a new project - specify DVD - everything else id default.
3.     Create a timeline
4.     Import asset. It is a simple Standard Video AVI file, 720x480.
5.     Select timeline for editing
Here's what happens:
A) Monitor window behaves normally. I can click play and watch the imported video. Sound is fine, everything is fine. I can start and stop the play back freely. All is well.
B) Now, I can do a number of things to create the problem I am having. The simplest is to just go to the timeline editor, select the AVI asset that has just been there, running fine, and remove it from the time line. At this point, the monitor window's internal frame that used to represent the video view port area, disappears. By "disappears", I mean that the Monitor window goes to the background color which is used for empty, unused window regions. What had been there before was a jet-black frame representing the video view area
Now, if I go to the project window and re-select the AVI asset that I was just viewing and put it BACK into the timeline, the Monitor does not restore. If I play the timeline, the monitor is still blank, although I can hear sound.
In addition to this, I also find that Encore has slowed so that response to the simplest operation is extremely slow. It doesn't crash, although, it might if I hang around long enough - but I don't. If I shut down Encore and restart it, it will work OK until I start manipulating video assets again and then the same thing will happen.
I should mention that, yes, I have this new computer but I was using Encore on an older and much slower XP system with less memory and drive space and I had no trouble with encore. I should also point out that the AVI assets that I use to produce this problem are the same ones I had used successfully on the older system.
Is there anyone out there that would find this problem familiar? Anyone find a solution?
Thanks in advance to anyone that responds.
Mark Roberts
Toronto, Canada

Hi John:
Thanks but, I had already done this. I was having THAT problem with Encore (could not even initialize before tanking) when I first installed it and that's when I updated the Roxio engine. I don't know what else there is to update or correct at this point.
There was one thing that occurred to me: When I was using XP, I had to disable Open GL in order to get Encore to stabilize. I've heard one recommendation for Encore that one must disable graphics acceleration. I would like try that here except I can't figure out how to do that in Windows 7.
I've been Googling "Windows 7 Disable Graphics Accel" and have come up with nothing useful.
Thanks for your help though and if you have any other ideas, I'm all ears.
Mark

Adobe Encore CS4 crashes during Render Progress

After creating entire menu without any problems ( there is occasional encore system crash...) I go to File and then Render Project. Rendering process start with rendering of my audio file and then it goes to "Rendering menu" and crashes every time! I called technical support but after couple of hours i was told to give it a rest and try call them next day... I have bought CS4 back in June 09 and it was running kinda good, I had a system crash from time to time but never a problem with rendering. Now it will not even render my old projects that I have successfully burnt in the past. I get the same error every time; " Adobe Encore has encounter an error. [..\Port\PhotoshopObject.cpp-568] " and after clicking on "continue" button Encore disappears... I have formatted my "C" drive reinstalled windows vista64, reinstalled all software downloaded "new" file from adobe and reinstalled Encore again but the problem is still there. I also read some post about encore crashes and i even deleted my nvidia dll driver but Encore crashed as usual... Does anybody have any idea how to solve this?
Thanks

Well,
it seems you have run Encore in the past succesfully (more or less) and this is the first "big stop".
I'd suggest few tips:
-have you recently update firmware, drivers of your video card or something else? If yes, I'd try the previous one, though I had to say that I'm working great with the newest beta 196.34 and my GTX 295.
- It's just a menu render matter? or everything can't be rendered? (you probably know you can render every menus/assets one by one).
Let's know
Ciao
Giorgio
P.S.; sorry for delays in answering but I have connection problem (provider), router keeps net connection but loose internet several times (has been "infected" by Bill's one?)

Encore CS4 Start-Up Problem

Hi,
When I try to open Encore CS4, either by creating a brand new project, or by using dynamic linking to bring in a short sequence from Primiere Pro, I get about 80% through the progress bar labeled "preparing transcoder settings" when I get the following error messasge, and the application crashes:
Adobe Encore Debug Event
Adobe Encore has encountered an error:
[..\..\src\AMEPresetProber.cpp - 258]
As best I can make out from the crash report, Encore is trying to run dvacore.dll when the crash occurs, although I'm not absolutely positive about this (I'm basing this on the program counter address where the exception_breakpoint occurs ; this address fell within the range populated by dvacore.dll if I am reading the crash file properly).
I'm assuming the error message is telling me that a routine in the C++ source file AMEPresetProber.cpp was running at the time of failure. I'm further assuming from the name of the file that Encore was looking through a list of Adobe Media Encoder presets when the problem occurred. But of course, without access to the source code, there is no way to see what the program was doing, or what error code 258 means.
If anyone has seen this problem, and has a suggestion on how to fix it, I would appreciate your input.
As an FYI, I did carefully read a long thread about Encore CS4 crashes, and tried several of the fixes there -- Updating my nvidia card drivers, installing the "roxio" px patch, updating QuickTime, and erasing Encore's preference files. I also checked Adobe's web site to see if there were any updates for Encore CS4 (I am running 4.0.1.048), but when I tried installing the only update available, I was told that it was older than the version I currently had loaded. At this point, short of reloading the entire CS4 suite, I'm out of ideas of what to try next.
I'm also wondering if there is something I could change with Media Encoder's settings that might help, since the problem seems to occur when Encore is looking over AME's presets.
Thanks in advance for your input.
-PTCruiser105
P.S. I'm running Vista Ultimate, service pack 2 on a dual-core 2.4G 6600 machine with 3GB of RAM.

Hi Stan,
Thanks for responding.
Truth be told, I got so focused on the Encore problem, it didn't occur to me to see whether Media Encoder was still functioning properly on my machine.
At any rate, I did byte the bullet, and re-install Encore, and the problem in question went away. Interestingly enough, when you opt to re-install Encore, CS4 automatically re-installs Media Encoder as well, so I guess the two programs are pretty tightly joined at the hip. Not surprising, perhaps, since I suspect that Encore is in some ways just a special case of Media Encoder, at least as far as the transcoding is concerned.
Of course, once I got Encore up and running, I tried to bring over a very, very small sequence from Premiere Pro and build it, and Encore crashed again (In PproHeadless.exe call to ImageRender.dll). Frustrating, since as a newbie all I'm trying to do is understand how the sequence settings I'm using in Premiere translate into final DVD output. The project I am working on involves a mixture of still images and short video clips culled from many sources in many formats, and my first renders in Premiere yielded lots of letterboxing (I'm learning the hard way about pixel aspect ratios and the like). As such, I figured before I built too many sequeneces, I should find a set of settings and work procedures that yield good results.
I used dynamic linking to bring over my sequence from Premiere, and I'm thinking that perhaps having both Encore and Premiere open at the same time requires too many resources on my limited system. Time to go figure out other options for moving sequences from Premiere over to Encore to see if that is in fact the issue.
-PtCruiser105

Premiere CS4 to Encore CS4 Export Quality Problems

I recently purchased a non-linear editing machine with an RTX2 Matrox Card and CS4 Professional. After six or seven projects, I finally noticed that all my imported .avi files exported through Adobe Media Encoder and burned through Encore CS4 are not as crisp, sharp, or look like the original high quality SD footage after the DVD is burned like it always used to look in CS2. ( jumped from CS2 to CS4)
These DVDs were of plays, football, and basketball games. It seems that when the camera shoots a close up, the video looks fine but after you shoot from a distance, there is a considerable difference in the footage. ( alomost blurry) I just caught this and nobody has complained but I watched one of my older DVDs I produced with CS2 and it had no quality loss whatsoever. There is a night and day difference
For the sequences, I am using Matrox SD, NTSC, Standard, 720 x 486 and capturing with firewire through the Matrox card. The raw footage is beautiful. The Video Preview Option is NTSC Standard and the Codec is NTSC Matrox DV/DV Cam.
I can playback a timeline from the Matrox card and burn directly to a DVD burner and the footage is perfect, but when I export, I have chosen Microsoft .avi file, Matrox DV/DV Cam/ MPEG2, and MPEG2DVD.
I have even changed the sequences codec to Matrox MPEG-2 I-Frame and tried exporting using that out of Adobe Media Encoder and am getting the same results.
None of my customers have complained yet, but I definitely do not want to continue producing almost blurry DVDs.
I am using Adobe Premiere CS4 Version 4.1.0 and Encore CS4 Version 4.0.1.048 and Matrox Version 4.1.0.23
Can this problem be related to and eliminated by updating my CS4 Production Suite and my Matrox Software.
I was wondering if anyone had experienced this same issue and what solution they came up with or if anyone knew if the updates would correct this important issue. I just filmed a lengthy play that I have to author through Encore CS4 and I cannot release any more of my productions until this problem is solved. This is a big dollar production and I need some assistance on this matter as soon as possible. Thanks Jimi White

Thanks for taking the time to help me out. I just purchased my non-linear with CS4 Production Suite and the Matrox RTX2. I have several projects that I am working on right now and I was advised by Adobe, Matrox, and my non-linear vendor, 1 Beyond, to finish those projects before performing updates.
I also found out that If I export using the MPEG2 8Mbps, it cleared up the video dramatically. We had to go through a number of export presets in order to find out what worked best in Encore. I am going to try to finish the project now and will advise on the results.
This is a basketball highlight DVD and that's when I noticed the problem. My other productions were photos to music, and non sporting events and I didn't notice any problems with those DVDs ( they actually looked decent. Worst part about it was, I finished the project once and burned 18 DVDs, and then reviewed one of them and found the problem. I have to start over and just eat the DVDs printed and all.
Thanks again, it was nice of you to get back to me.
Jimi

Encore cs4 in windows 7 32bit not working

I'd really like to be able to create autoplay DVDs from preimere cs4 any way possible.
i resintalled cs4 everything andupdated the roxio driver. Note: I ran the cleanup tool as well.
when I try to use dynamic link library send to encore i get the following error:
adobe encore could not find any capable video play modules.
when i try to open the encore files I have i get this error
cannot open project; the folder for this project cannot be found
Help please

Hi,
Please also try the following steps.
Note: Please ensure that the DVD-ROM is the first booting device.
1. Please insert the Windows 7 DVD and reboot the computer.
2. When we are prompted to press a key to boot from the DVD, please press Enter or the space bar.
3. Click "Next" and click "Repair your computer".
4. Please highlight "Windows 7" and click "Next".
Note: A computer may store more than one copy of Windows 7. Please highlight the one which encounters issues. The order of the items in the dialog-box is identical with the one on the boot menu.
5. In the dialog box titled "System Recovery Options", click "Command Prompt" and type in the following commands. Please press the Enter key after entering each command.
C:
CHKDSK /F /R
Note: Please replace "C:" with the actual drive letter of the system drive on which Windows 7 is stored.
What’s the result?
Thanks,
Novak

Adobe Encore CS4 Crush during building

When I am building the proyect, Encore crush. It crush when the program is "moving" the video, and when I check the proyect, a deleted menu appears as an orphan menu, and 2 timelines has no "end actions" but I have check it and both has the end action set.
What can I do or where is the prblem??
This is the first time I use Encore. so please be nice to my

Even if you have a later version, this is a good book to learn Encore
http://www.amazon.com/Focal-Easy-Guide-Adobe-Encore/dp/0240520041/ref=sr_1_1?ie=UTF8&s=boo ks&qid=1277266925
NEVER use Overrides http://forums.adobe.com/thread/860691?tstart=0
Odd Errors http://forums.adobe.com/thread/670174?tstart=0
For CS4 you must update the Roxio component http://forums.adobe.com/thread/400484?tstart=0
More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
As well as the below, right click the Encore icon and select Run as Administrator... which is NOT the same thing as running the computer with the Administrator account... and which fixes several "odd" problems
Run as Administrator http://forums.adobe.com/thread/771202?tstart=0
Long File Names or odd characters cause problems
Read http://forums.adobe.com/thread/588273
And #4 http://forums.adobe.com/thread/666558?tstart=0
And This Message Thread http://forums.adobe.com/thread/665641?tstart=0
The individual CS5 pages also have links to the CS4 user guide pages
CS5 User Guides - online and PDF (see link in upper right corner at individual pages)
http://blogs.adobe.com/premiereprotraining/2010/08/help-documents-for-creative-suite-5-pdf -and-html.html

Adobe Encore CS4 unter Windows 7 Problem mit Einlesen von HD Material

Similar Messages

Maybe you are looking for