Adobe Encore has accountered an error [..\..\src\AMEPrestProber.cpp-265]

Hi all,
I have used the CS5 (CS Production Premium) for four years and it has worked fine. Mainly edit High Definition, file based video (SDHC). After editing, I use the Dynamic Link to Encore to create my project and burn to Blu-rays. Accept, since two weeks ago, all of a sudden, I cannot open or create new projects from Première Pro CS5.
The Dynamic Link takes me to Encore and then it comes up with the following message and then closes:
Adobe Encore has accountered an error. [..\..\src\AMEPrestProber.cpp-265]
I have tried opening just the Encore and then import timeline from my Première Project, but to no avail.
I have also, deleted and reloaded Encore from disk and updated, but still not working. I am puzzled and cannot seem to get help from Adobe as it direct me here.
Whilst, I managed encode the timeline sequences from Prem Pro CS5 to Adobe Media Exporter and then imported encoded file into Encore, it seemed to take 12 hours to encode, whereas with Dynamic linking way, I am able to create project, much, much faster.
Would really appreciate some help from knowledgeable people.
Thanks in advance.
Bob
System: Custom built by Overclockers UK
Processor: Intel i7, 3.02GHz boosted to 4GHz
RAM: 12GB
Windows 7 Professional, SP1
1TB System HDD 7200rmp
1TB Video Drive HDD 7200rpm
1TB Third drive HDD 7200rpm

Hi Stan,
Thank you for your response.
I meant 'Uninstalled'. Just the Encore and Pre Pro, but no the whole Production Premiums Suite. Should have I uninstalled the complete Production Prem and re-install?
I don't understand the 'Cleaner' bit? I will be happy to try this, if someone tells me what it is and how I can locate it.
Yes, I am the Adminstrator and the only one using the PC.
I did encode the time lines in Prem Pro to .H624 Blu ray and then used these. But took too long in Encore.

Similar Messages

Adobe Encore has encountered an error. が出て突然終了します.

過去に作ったプロジェクトを変更するために、EncoreCS4でそのプロジェクトを起動しようとすると、
「Adobe Encore Debug Event」のウィンドウが出て、
Adobe Encore has encountered an error.
　[..\..\Src\Clip\VideoClip.cpp-275]
のメッセージが表示されます。
画面には、[Continue]のボタンがあるのですが、
クリックすると、Encore画面は即座に終了して
「アプリケーションAdobe Encoreが予期せずに終了したことを検出しました」の画面になります。
タイミングとしては、「トランスコード設定を準備中」のところで、このエラーが発生します。
また、8本のプロジェクトのうち、４本にこの同じ現象が起きるのですが、
エラーメッセージはどれも同じです。同じように作っている残りの４本は正常に起動します。
どなたか解決方法をご存知でしたら、お教えいただけませんでしょうか？
よろしくお願いたします。

ぴるくるんさん、こんにちは。
対処については下記ご参照ください。
Why can't I export from Premeier Pro CS5 to Encore CS5?
Adobe Encore has encountered an error.　と出てしまいます。
あと回避方法としてはDynamic Linkを使わず、
Premiere Pro で事前にファイル書き出しして、
それをEncoreで読み込むとエラーが出ない可能性があります。
よろしければお試しください。

"Adobe Encore has encountered an error. [..\..\src\AMEPresetProber.cpp-258}"

Does anyone have any suggestions that doesn't involve a full reinstall, its 3 times aleady and thats getting old fast. Encoder and Premiere Pro seem to be working ok, the issue happens when I use Dymamic Link and start to process the file, it processes briefly then the error appears.

I have tried opening Encore....new project and importing the folder of my PPro project, it appears to be transcoding with a timeline for download then the same error appears. Derek
If you don't tell it to transcode, it is only scanning the project and/or preparing general preset information.
with a timeline for download then the same error appears.
This part makes no sense to me.
Open Encore and create a new (DVD) project. Import nothing. Add a menu from the library. Does that work?
Now "import as timeline" a video file (not a PR sequence). Does that work?

Adobe Media encoder has encountered an error: \Src\Init.cpp-754

What the heck? This occurs on all of my windows machines (Intel desktop, AMD laptop), trying to encode divx avi files that previously were able to be encoded in previous versions of AME.
Anyone know of a fix?

Then use the previous version.
AVI means nothing. I had a word document saved as AVI and PR could not handle it. AVI is just a container and can have all kinds of stuff inside, old shoes, scrap metal, chemicals, furniture, electronics, spare car parts, pharmaceuticals, you name it. The only thing relevant is WHAT IS INSIDE the container, the codec. If PR does not like it, either convert to something that is editable or use different software.

Adobe Encore has stopped working

Hey a,, I'm a CC user but downloaded (as per Adobe's advice) the old (CS6) version of Premiere which comes with Encore CS6. Uninstalled Premiere so i was left with just Encore, but it won't even start at all - I immediately get a 'Adobe Encore has stopped working' when starting up the programme. Any thoughts, anyone?
APPCRASH / Adobe Encore.exe / Version 6.0.2.4 / Fault Module MSVCR100.dll / 10.0.40219.325
I'm running 64-bit Windows 7 with Service Pack 1.
thanks,
Geoff.

This is not a common error. I suspect a missing/corrupt file, but do not know.
I would un/reinstall. This time, even though it should not matter, leave Premiere CS6 installed, at least until all is working.
I do not know what the recommendations are for using the uninstall cleaner when doing a limited uninstall like this for CC users.

I keep getting the Error "Adobe Muse has encountered an error and will now exit..."

I keep getting the Error "Adobe Muse has encountered an error and will now exit. Please report the last few actions you took leading up to this error to the Adobe Muse CC team. UIDs With Multiple Owners: ImageFrame owned by PagePageItem and BaseLink". I get this when I try and save and I am not sure what is causing it or, since i made several changes to the site, which actions it would have been. I am using the latest updated version of Muse. the 2014.3 I was able to publish site with changes but it did not save, so I have a web version different then what is saved. My published site is the most recent one but the saved version is one without latest changes. When I tried to merge it started updating the Assets and then showed that Error message and shutdown.

I believe you have already updated Muse version which includes fix for this issue , if not then please update Muse to latest version.
Thanks,
Sanjit

Adobe reader has stopped working error message after installing reader XI on windows 7

Adobe reader has stopped working error message when loading reader after installing reader XI on windows 7.
Does anybody know why ?

Dear Pat,
Thank you for your reply.
It is Ver. 11.0.06 for Acrobat XI
No, I can't open the Reader at all. The error message box popped up immediately when I run the Reader

Adobe has encountered an error [..\.src\AMEprosetprober.cpp-265]

I'm starting a new project in Encore CS5.5+ and this is the error I'm getting - plus a crash. Any ideas?

New installation - starting a new project. i am thinking about doing an uninstall - and then use the cleaner. i also attempted dynamic linking from Premier to Encore. This was the first attempt.
Michael Mathews - Golf Klubz Fore Kidz Stan Jones <[email protected]> wrote:Re: Adobe has encountered an error
created by Stan Jones in Encore - View the full discussion
I don't recall anyone getting this error, and all Google finds is your post.
When you say "starting a new project," how did you start it?
Using dynamic link?
New install?
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4303797#4303797
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4303797#4303797. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Encore by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I am trying to import subtitles to Adobe Encore but am getting error messages...

I am trying to import subtitles from a software called Aegisub to Adobe Encore, but i am receiving this error message:
The software that is used to decode the media is not available on this system. Installing the correct decoders for the files you are working with may help to correct the problem.
I have exported the subtitles as an Encore text file but it still won't allow me attach these to my video. I have exported the video from Premiere as an H.264 and that slots into Encore just fine, i just need to use Encore to attach the subtitles.
Can anyone tell me what i might be doing wrong?
Thank you.

Thanks Stan. I think this is probably the answer but seeing as i am doing this at work, it is telling me the action was stopped because it needs to be checked by an administrator.
If i manage to succeed, i shall let you know. I was trying to import as an asset, wrongly, so this is probably going to be the solution.
Thank you

'Adobe Reader has stopped working' error message

I've recently updated from Adobe Reader X to Adobe Reader XI using Adobe Cleaner and installer from the website. Whenever I open a pdf file or start the Reader the following error occurs and closes the program: 'Adobe Reader has stopped working'. This message would never occur when I had version X. Moreover, it doesn't occur in any other program I use so far. I've disabled Protected Mode and run Eula.exe, but that didn't help. Here are some details from the event log
Faulting application name: AcroRd32.exe, version: 11.0.6.70, time stamp: 0x52b528e2
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18015, time stamp: 0x50b83c8a
Exception code: 0xc06d007e
Fault offset: 0x0000c41f
Faulting process id: 0xb30
Faulting application start time: 0x01cf6ad78a3eba02
Faulting application path: C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
Report Id: d4e22774-d6ca-11e3-ba2e-e9455936eb49
What should I do to fix the error?
Please, help me resolve this issue.

Duplicate of https://forums.adobe.com/thread/1469330

Adobe Premiere has encountered an error... over and over again

Hello
I've been a happy Adobe Premiere Pro CC customer for 4 months until recently when I strated experiencing a problem with re-opening saved projects. I can easily start new project save them, work on them and so on but as soon as I close them and try to open them few hours later I get a message that the application has encountered an error. The line goes like this:
c:\ppro722\releases\2013.10\shared\adobe\mediacore\mediafoundation\api\inc\... (can't see the rest unfortunately :/)
I tried opening the project in the 2014 version as well but it didn't help much.
Any suggestions? I'm forced to finish a project in one sitting this way, which is quite troublesome.

This is a known issue, which we unfortunately do not have a solution for yet. Here's the main thread on the topic: Debug event f:\mightysilt_win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe

"Adobe encore a cessé de fonctionner" (Adobe Encore has stopped working)

English version below
Bonjour,
J'ai un problème depuis que j'ai installé Adobe Premiere Pro CS6 et qu'Adobe Encore CS6 a été installé en même temps.
Voilà en fait Adobe Premiere Pro ne reconnaît pas ma carte graphique (là n'est pas le souci, je savais que je n'arriverai sûrement pas à démarrer le programme avec mon laptop), mais j'ai aussi un problème assez incompréhensible avec Adobe Encore.
Que je le lance normalement ou en tant qu'administrateur, Encore se lance en ~5 secondes, une fenêtre apparaît en surimpression qui me propose d'ouvrir un document, de créer un nouveau document ou de "m'enquérir" des nouveautés du logiciel. Jusque là aucun souci le logiciel semble stable.
Mais dès que je clique sur nouveau , l'écran se grise et apparaît la tant redoutée boîte de dialogue "Adobe Encore a cessé de fonctionner", ça me dit que Windows essaye de résoudre le problème puis le programme s'arrête. Sans message supplémentaire de Windows ni rien. J'ai essayé de redémarrer, de supprimer le cache du logiciel et de windows, de lancer en admin, ... rien n'y fait.
En espérant que quelqu'un pourra un peu m'aider là dessus car je perd patience, merci d'avance !
Hi everyone,
I've had an issue since I installed Premiere Pro CS6 and Encore CS6 on my laptop.
Premiere Pro won't work, which is no surprise given my lame GPU, but Encore won't work.
In fact, when I launch it, Encore lauches in about 5 seconds and then it opens, a window pops up with 3 options : create a new file or project (cant remember the name), open a file or check the news related to Encore.
But Encore wont let me create a file : it crashes whenever I try and since I have no .enc file on my computer (first time user), I can't check the 'open file' option. The third choice does nothing but open a tab with adobe website on Google Chrome.
Please help in any way you can, I'm running out of patience here and don't know what to do !
Tristan

Premiere Pro won't work, which is no surprise given my lame GPU,
This must be fixed. The GPU only affects playback, not whether the program works.
Encore wont let me create a file : it crashes whenever I try
Many possibilities. Please answer the questions that you'll find at the link below:
Adobe Forums: FAQ: What information should I provide when asking a question on this forum?
Welcome to the forum!
Jeff

Cs5 capture error \src\timecode.cpp-995

I've been seeing this error around for a while with no solutions it seems, I'm hoping I just missed something obvious:
Whenever I try to capture footage in any project the capture window freezes and premiere says
Premiere Pro debug event
Premiere pro has encountered an error
[...]\[...]\src\timecode.cpp-995
then crashes. When I say try to capture I mean even opening the capture window causes this.
A Little while ago I captured an hdv project no problem. time passes, no changes to software or system, and I attempt to capture DV from my Gl2 through firewire by going to File>capture. the window begins to open but is blank and I get the above error and crash. This happens whether or not I have the camera on or off, or the cable not plugged in at all. I Can't even get to the point where it says It cant find the camera. This is happening no matter what format I create a new project in.
I've tried reinstalling, getting rid of background processes, turning capture device control on and off.
OnLocation's capture works just fine so luckily I can still work.
I'm running Windows 7 pro x64
intel i7 975, 4gb ram, nvidia gtx 280m
I know theres more info im supposed to provide. I found a list somewhere in the help and support area by mistake earlier and now I can't find it again, sorry.

The Premiere Pro CS5 (5.0.3) update fixes some stability issues with capturing on Windows. Let us know how things work after you've installed the update.

Adobe Encore CS6 Mac Vobulator Error 332

After searching every form for this similar error, I've started my own discussion specifically for this error on Mac.
My Project:
I am building a double layer dvd with 9 menu's, 29 timelines, many more buttons, no transitions, and a tight deadline.
The project has NO dynamic link files.
I have checked every single timeline for duplicate/overlapping chapter markers and started from scratch (except menu's) and no luck. Lastly, I reinstalled the whole program including the stock content.
I am currently trying the build on a different (mac) computer.
I tried to build a blu ray image and it worked perfectly, the problem is only with building dvd's (any outlet - image - folder - disc).
Where do I go from here?

Neil, this disc does not have a chapter playlist.
Also, I am familiar with the "play all" type bug and I think that this one is similar in respect that the building process fails because it can't 'link' the media with the source material.
Overall Flowchart:
Closeup 1:
Closeup 2:
Closeup 3:
Closeup 4:
*This project doesn't include moving menu's or audio during menu's
Currently, all of the timelines are imported using rightclick>import as>timeline
Then I select the FULL HD resolution export
And once ready to build, I will allow Encore to transcode my footage.
Thank you everyone for your responses (LONG LIVE ENCORE).
Hopefully, we will see an Encore CC 2015 launching soon.

Adobe premiere has encountered an error

Premiere CC bringt diese Fehlermeldung.
Habe dann versucht mit einen neuen Benutzer, dann ging es,
aber nur für einen Tag!
Was kann ich noch machen?

This is a known issue, which we unfortunately do not have a solution for yet. Here's the main thread on the topic: Debug event f:\mightysilt_win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe

Adobe Encore has accountered an error [..\..\src\AMEPrestProber.cpp-265]

Similar Messages

Maybe you are looking for