Adobe - Error executing program
Hi,
When I am executing the WebDynpro program DEMO_ADOBE_OFFLINE I am getting the following error in the log file
ACCESS.ERROR: Authorization check for caller assignment to J2EE security role [sap.com/com.sap.lcr*sld : LcrClassWriter].
We have done the ADS configuration.
When I execute the program FP_CHECK_DESTINATION_SERVICE it runs continuously. Kindly help in resolving this issue
Regards
Aruna
Hello,
it seems, that there is no data exchange between ads an application-server.
Causes can be
- the user ADSUser is not defined,
- the password for user ADSUser is expired.
Check the ads with the configuration guide.
Best Regards
Oliver Prodigner
Similar Messages
-
Dear all.
I'm executing this simple code:
SELECTION-SCREEN BEGIN OF BLOCK I1 WITH FRAME TITLE TEXT-001.
PARAMETERS: ZB_TEST as checkbox default 'x'.
SELECTION-SCREEN END OF BLOCK I1.
IF ZB_TEST eq 'X'.
write 'X Upper'.
elseif ZB_TEST eq 'x'.
write 'x lower'.
endif.
When executing the frist time the system Display x lower.
Then when re-executed the Program with no parameter.
Then executed the Program with the check box set the system Display X Upper.
Best RegardsHi,
Give always in Capital letters..
ZB_TEST as checkbox default 'X'.
If the check box is checked the ZB_TEST = 'X'.
Elseif the check box is not checked then ZB_TEST = ' '.
Thanks,
Naren -
Error while executing report : Error in program CL_RSR_RRK0_CURR
Hi Gurus,
I am getting an error while executing a report.This error is only for one date seletion. For other selections report runs fine.Below is the error description & long text.
Please let me know if you have any solution on this.
A System error in program CL_RSR_RRK0_CURR and form FILL_CUDIM_02-04.
System error in program CL_RSR_RRK0_CURR and form FILL_CUDIM_02-04- (see long text)
Message no. BRAIN299
Diagnosis
This internal error is an intended termination resulting from a program state that is not
permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in
the planning modeler, and if you can reproduce this termination, record a trace (transaction
RSTT).
For more information about recording a trace, see the documentation for the trace tool
environment as well as SAP Note 899572
Thanks,
Prasanna N.Hi Prasanna,
Check the below SAp Note:
SAP Note : 1030657
Thanks,
Vijay. -
Error while executing tcode FSE2 "Internal error in program SAPLFIBS no 5"
I am getting below error which while trying to execute tcode FSE2 (Financial statement version). Can't able even go inside the tcode. Please tell how to solve this.
"Internal error in program SAPLFIBS number 5"Hi Dsr,
Use transaction code <b>OB58</b>->Highlight the Fin. Stmt. version you want to Change and click on the <b>Display</b> icon.->Next, click on the "<b>Fin.Statement items</b>" icon on the application tool bar. You can then expand and carry out your update as appropriate.
If you do not have the prerequisite authorisations, you wouldn't be able to do this.
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob -
Hi ,In sap bods, im using abap dataflow as my source and target is flat files ,while im executing its showing error
"Execute ABAP program <C:/Program Files/Business Objects/BusinessObjects Data Services/zcustdim.aba> error < Open File Error"
how can i solve this problem,
Moderator message: please have a look in the forums for Business Objects.
Edited by: Thomas Zloch on Mar 8, 2012Prem,
Looking at the error that you have shown, looks like its a different error. Is there a control/GRID that is being used in the program.
If you are using a CUSTOM CONTAINER and a GRID to display the data, whenever you executing the program, you should not create the container. Something like this ..
if cl_gui_alv_grid=>offline( ) is initial.
create object CUSTOM_CONTAINER
exporting container_name = CUSTOM_CONTROL
endif.
Regards,
Ravi
note : Please reward the helpful posts. -
Error while executing program RFUMSV50 for deferred tax
Hi,
While executing program throgh T.Code S_AC0_52000644 - Deferred Tax Transfer (New), program RFUMSV50, system gives error as Message no. F7229 Only company codes without a jurisdiction code permitted.
We are using TAXINJ procedure.
We have implemented SAP Note No. 921634.
Kindly suggest solution ASAP.
Regards,
maheshHello Samay,
I believe you are running the query in Excel.
You are in 700. I would advise to use the latest patch if possible ( > 904 ).
May be, that will solve your issue.
Otherwise, please attach the trace file details.
You can record a front-end trace as follows:
1.) Start BExAnalyzer
2.) Go To Global Settings
3.) Go to the trace tab
4.) Check "Record Trace"
5.) Close the dialog
6.) Close BExAnalyzer
7.) Reproduce the problem
After the "Critical Program Error" popup appears you find a file
BExAnalyzerTrace.txt in the %temp% folder.
Regards,
Sheik Bilal -
Good morning, AdobeSuite installation does not work and I receive"error initializing program, download adobe advisor" error message. On Adobe site it appears"The Adobe Support Advisor has been discontinued The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation."
Nobody can tell you anything without proper system info or other technical details. We don't even know what exactly you are trying to install.
Mylenium -
I get this error after updating ONONE premium edition 8 to 8.1
been to their site no luck in resoving error.
I click ok to error PS cs6 still launches, just annoying.
ONCoreFoundation7.dll is part of ONONE 7after updating ONONE premium edition 8 to 8.1
does not say windows 8 or 8.1
again, not perfect Suite 7, updating ONONE premium edition 8 to 8.1
does not say 7
here's your more info
I'm trying to fix an error message not covered in the knowledge base.
I open PS CS6 (after updating to PE 8.1) and I get an error message...
Adobe Photoshop CS6: Photoshop.exe - System Error
The program can't start because ONCoreFoundation7.dll is missing
from your computer. Try reinstalling the program to fix this problem
I followed instructions in this article, but still get the error, it doesn't stop PS from launching after clicking ok.
Does anyone know the fix? I even tried reinstalling PE 8.1.
PE=Premium Edition -
When i executed program , it go to dump, show this error
Hi Gurs
when i executed program , it go to dump, show this error .
Short text
The ABAP program lines are wider than the internal table.
Error in the ABAP Application Program
The current ABAP program "SAPLSKBH" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
it show this lines.
read report l_prog_tab_local into l_abap_source.
366 * catch cx_sy_read_src_line_too_long into ex_too_long.
367 * endtry.
368 check sy-subrc eq 0.
Edited by: Rob Burbank on Feb 17, 2010 2:54 PMd022s length is only 72 char
so u have to copy D022S Structure to ZD022S Structure and
and define like LINE CHAR(data type) 1500(length)
then u define internal table like
data: begin of itab occurs 0.
include structure Zd022s.
data: end of itab. -
Executing query error: System error in program SAPLRRI2 and form REP_A
Hello Experts,
I am facing problem while executing query.
I have activated a query from BI content. The query is activated successfully in development and running successfully in development, so I transported the same into QA.
When I execute this query into quality, automatically debuger opens. After I come out of debuger I get following error message:
" >> Row: 82 Inc: LRRMSU13 Prog: SAPLRRMS
System error in program SAPLRRI2 and form REP_ASSIGN_INITIAL_OPT-01- (see long text)
Error when generating dataProvider "
This query is using some standard structures, which are running successfully in other queries in QA.
what would be an issue?
Regards,
Nirav ShahHi,
Try to regenerate the query in RSRT t.code.
ie) RSRT - give the query name - Generate report ( icon will be there near to Execute + debug) .
After generating the report, (logoff and login )try to execute the query again ..if the above solution doesn't work, check the below OSS notes which may help for you.
OSS notes : 1. 1121766
2. 1117966
3. 1225856
Regards,
Siva. -
System Error in program CL_RSR executing queries
Hi,
We have several queries created from multiprovider X and these queries are included in a workbook. Multiprovider is active and fine (I have used the programs RSCOMPCONS and RSR_MULTIPROV_CHECK return status OK).
When I open the workbook the followings error messages are showed (before selection screen):
- System error in class SAPMSSSY1 method: UNCAUGHT_EXCEPTION
- System error in program CL_RSR and FORM GET_INITIAL_CHAVL_OFF-02-
We are looking sap notes (we are in the new version 7.30, Support package 5) in order to solve this error but We don't find the solution.
Please, could you help me?
Thanks!Might require to collect the workbooks, queries along with the MP & perform a transport. Please collect the roles also. This must solve.
-
SYNTAX_ERROR unable to log in to SAP system Syntax error in program "SAPMSE
hi SAP Experts,
I have applied Basis patch 12 and I scheduled the background. Backgroud job was terminated. System became slow. Then I stopped the server and restarted. Now, I am unable to log in to SAP GUI by entering Username and Password and getting syntax error.
Syntax error in program "SAPMSEM1".
What happened?
Error in the ABAP Application Program
The current ABAP program '????????????????????????????"
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occured in program "SAPMSEM1" in include
"CL_SALV_FORM_ELEMET==========CU" in
line 13:
"the type "IF_SALV_FORM_CONFIG" is unknown."
The include has been created and last changed by:
Created by: "SAP "
Last Changed by: "SAP "
I am unable to access any transction code.
Please help me..
Thanks in advance...
Rajuhi,
Thanks for your response.
i haven't take any back up. can u pls tell me step by step procedure to implement the SP with TP.
your answer will be helpful..
Regards
Raju -
Syntax error in program "SAPLXRSA " -SENT
Hi Guys,
I have done user exit in R/3 datasource when I do the test extraction using RSA3 and geting the data without any error. I've transport the requet to Test Box and tried to do the extraction in TestBox and getting the below SYNTAX Error message. Kindly advise it's very URGET. Thanks in advance.
ShrtText
Syntax error in program "SAPLXRSA ".
What happened?
Error in ABAP application program.
The current ABAP program "SAPLRSAP" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLXRSA ", the following syntax error occurred
in the Include "ZXRSAU01 " in line 21:
"Field "ZOXPRO0043" is unknown. It is neither in one of the specified t"
"ables nor defined by a "DATA" statement. "DATA" statement."
Author and last person to change the Include are:
Author "SAPCHEOLENG "
Last changed by "CCEV200 "
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPLXRSA ".
You can also perform the syntax check from the ABAP/4 Editor.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
In program "SAPLXRSA ", the following syntax error occurred:
"Field "ZOXPRO0043" is unknown. It is neither in one of the specified t"
"ables nor defined by a "DATA" statement. "DATA" statement."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "hawk"
Network address.......... "137.132.12.22"
Operating system......... "HP-UX"
Release.................. "B.11.23"
Hardware type............ "ia64"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "hawk"
Database type............ "ORACLE"
Database name............ "QAS"
Database owner........... "SAPR3"
Character set............ "en_US.iso88591"
SAP kernel............... "640"
Created on............... "Oct 16 2006 20:35:55"
Created in............... "HP-UX B.11.23 U ia64"
Database version......... "OCI_920 "
Patch level.............. "153"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "HP-UX B.11"
Memory usage.............
Roll..................... 16128
EM....................... 12569760
Heap..................... 0
Page..................... 65536
MM Used.................. 1716768
MM Free.................. 2470608
SAP Release.............. "640"
User and Transaction
Client.............. 220
User................ "CCEENGG"
Language key........ "E"
Transaction......... "RSA3 "
Program............. "SAPLRSAP"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "SAPLRSAP" in
"CALL_DATA_CUSTOMER_FUNCTION".
The main program was "RSFHGEN2 ".
The termination occurred in line 96 of the source code of the (Include)
program "LRSAPF06"
of the source code of program "LRSAPF06" (when calling the editor 960).
Source Code Extract
Line
SourceCde
66
CALL FUNCTION BW_BTE_CALL_BW204010_E
67
EXPORTING
68
I_DATASOURCE = L_DATASOURCE
69
I_UPDMODE = P_UPDMODE
70
TABLES
71
I_T_SELECT = P_T_SELECT
72
I_T_FIELDS = P_T_FIELDS
73
C_T_DATA = P_T_DATA
74
C_T_MESSAGES = L_T_MESSAGES
75
EXCEPTIONS
76
OTHERS = 1.
77
DESCRIBE TABLE P_T_DATA LINES L_LINES.
78
MESSAGE S408 WITH L_LINES.
79
Handle BTE-Exit error messages
80
IF SY-SUBRC <> 0.
81
P_SUBRC = SY-SUBRC.
82
IF 1 = 2. MESSAGE E021 WITH ''. ENDIF.
83
MESSAGE_WRITE 'E' 'R3' '021' 'BW_BTE_CALL_BW204010_E' '' '' ''.
84
ENDIF.
85
IF NOT L_T_MESSAGES IS INITIAL.
86
PERFORM WRITE_BTE_EXIT_MESSAGES TABLES L_T_MESSAGES
87
CHANGING P_SUBRC.
88
ENDIF.
89
ENDIF.
90
ENDIF.
91
92
Call Customer-Exit
93
DESCRIBE TABLE P_T_DATA LINES L_LINES.
94
MESSAGE S407 WITH 'EXIT_SAPLRSAP_001' 'CMOD' L_LINES.
95
CLEAR SY-SUBRC.
>>>>>
CALL CUSTOMER-FUNCTION '001'
97
EXPORTING
98
I_DATASOURCE = L_DATASOURCE
99
I_ISOURCE = L_12B_SOURCE
100
I_UPDMODE = P_UPDMODE
101
TABLES
102
I_T_SELECT = P_T_SELECT
103
I_T_FIELDS = P_T_FIELDS
104
C_T_DATA = P_T_DATA
105
C_T_MESSAGES = L_T_MESSAGES
106
EXCEPTIONS
107
RSAP_CUSTOMER_EXIT_ERROR = 1
108
OTHERS = 2.
109
DESCRIBE TABLE P_T_DATA LINES L_LINES.
110
MESSAGE S408 WITH L_LINES.
111
112
Handle Customer-Exit error messages
113
IF SY-SUBRC <> 0.
114
P_SUBRC = SY-SUBRC.
115
IF 1 = 2. MESSAGE E020 WITH ''. ENDIF.
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
1
SY-TABIX
1
SY-DBCNT
0
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
Report for the extractor call
SY-MSGTY
S
SY-MSGID
R3
SY-MSGNO
407
SY-MSGV1
EXIT_SAPLRSAP_001
SY-MSGV2
CMOD
SY-MSGV3
100
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
5 FUNCTION SAPLRSAP LRSAPF06 96
CALL_DATA_CUSTOMER_FUNCTION
4 FORM SAPLRSAP LRSAPF06 96
CALL_DATA_CUSTOMER_FUNCTION
3 FORM GP3PDR0GQDXJ0ZOA35DPGNCU80M GP3PDR0GQDXJ0ZOA35DPGNCU80M 274
PROCESS_DATA_PACKAGE
2 FORM GP3PDR0GQDXJ0ZOA35DPGNCU80M GP3PDR0GQDXJ0ZOA35DPGNCU80M 170
DATA_TRANSFER
1 EVENT RSFHGEN2 RSFHGEN2 59
START-OF-SELECTIONHello Raja,
I think some objects should still lying in the dev. server which are yet to be transported, also try to deactivate and reactivate the project for user exit for BW and transport it .
Also manually request can be created for transporting object "ZOXPRO0043" into quality environment and transport it .
Let us know the output for the same.
Hope that helps.
Regards
Kapadia
***Assigning points is the way to say thanks in SDN.*** -
Short dump in VF01 - Syntax error in program "RKEAK9RECP3000001"
Helo all,
We recently copied our production client to a QA client and when we try to save an SD invoice (VF01), we get a short dump titled - Syntax error in program "RKEAK9RECP3000001".
The dump long text states:
"The Dictionary structure or table "K9RECP3000001" is either not active"
" or does not exist."
and
NOTE in case of a SHORT DUMP:
if the following perform statement should lead to a short dump, then
the report stated in the short dump is missing (RKEAK9Rsssmmmnnnn)
Check if table K9Rsssmmmnnn exists. If not it should be transported
from the original system.
Regenerate the missing reports by using transaction SE37, entering
function KEDR_REGENERATE_ALL_REPORTS and pressing button 'Test' and
'Execute'.
but I tried to run function KEDR_REGENERATE_ALL_REPORTS in SE37 and the problem persists.
Maybe I'm not running it correctly - there is no execute option when pressing "Test" so I enter the function and press F8, which takes me to a screen titled "Test function module" and then I execute.
My suspicion is that table "K9RECP3000001" cannot be created or generated since it it a system specific naming convention K9RSSSCCC0001 in which SSS is system ID (in our case ECP is production and ECQ is QA) ans CCC is client number (300 in prod, and should be 286 in ECQ).
Has anyone encountered this type of a problem and knows how to fix it?
Needless to say, I looked at OSS notes, but did not find the solution there.
Any thought will be appreciated,
Yoel.Shalom Yoel,
This problem may be caused by the fact that some derivation rules
that were originally created once in a system have been transported
into target system without transporting the dependent objects
as well (the generated tables for the derivation rule entries).
You can see this by execution of program RKEDRCHECK with only
parameter 'Check in all clients' marked. You will then get
inconsistent derivation steps (which refer to a generated table
table for the rule entries that doesn't exist because it was
not transported).
There are two ways to solve the problem:
1.) If you don't need these steps any more in derivation you can get
rid of them by executing program RKEDRCHECK with both parameters
marked ('Check in all clients' and 'Delete inconsistent steps').
2.) If these steps should remain you have to retransport the missing
tables from the source system in which these tables have to exist
(creating transport requests for the customizing of derivation by
pushing on the 'Transport' icon in the source system in transactions
KEDR and KEPC).
For each derivation step,the system generates a program RKEAK9R *
and a table K9R+ System ID+ Mandant+ a number of five figures
from the object number in KEDR.
br, Guido -
HI All,
The following error is thrown when I execute the query.
abort system error in program CL_RSDM_READ_MASTER_DATA and form_sidval_direct_
However, earlier today, I ran this query successfully several times.This Query is on a multiprovider.
Appreciate your help in advance.
Regards,
HarikaDear Harika,
Try to repair at RSRV and check.
Check: Re: SID error for characteristic
Srini
Maybe you are looking for
-
Digitizer randomly typing on its own
I just put a new replacement digitizer screen on my iPad 3, it is now randomly typing and functioning on it's own. i now trying to figure out the cause. I thinking either short out, or bad replacement digitizer screen. Anyone have any other poss caus
-
How to change the value of root-context in application.xml
Hi all, I want to deploy an 1.4 application to SAP NetWeaver CE server. Since the name of my web-project is pretty long, I prefer to change the context-root atribute in the deployment-descriptor. Is that right that the context-root entry only can be
-
RSA1 datasource can't be found
In RSA1 data source panel, I click the icon "search", I already select datasource check box, but I can't find my datasource ZMAsterdata_change, how can I view ZMASTERDATA_change, I have so many data source
-
My creative cloud desktop application is blank. What did I do wrong?
my creative cloud desktop application is showing blank. how do i fix it?
-
LMS 4.1 - Fault Notification Group
I've populated my LMS v4.1 device database with all our managed devices (192.168.x.x). When I go to 'FAULT NOTIFICATION GROUP' and I must select either the nodes or groups that are associated with this this group, certain nodes are not appearing in