Adobe field values not getting displayed in UWL workitem

Hi,
We filled a ISR Adobe form and submitted it and generated the corresponding notification number.
On clickng the 'display and print form', the form is gettin displayed properly.
But on checking the form at the approvers UWL, the field values are not getting properly filled.
The form is getting properly displayed at R/3 through IQS22 and also the data values are properly attached to the notification number( checked through ISR_PROCESS_EVENT ).
Kindly help.
Thanks and Regards,
Anto.

Thanks for publishing your own solution!
Cheers,
Noë

Similar Messages

Data carrier & application field are not getting displayed in CV04N

Hi Guru's
In TCode : CV04N, data carrier & application field are not getting displayed.
While i compare with my IDES system, data carrier & application fields are getting displayed in CV04N.
Let me know is there any configuration that has been missed out.
Regards
Bhanu

Hi Bhanu,
Please note that the fields 'Data carrier' & 'Application field' are visible only if no document type is entered.
Suppose you enter a document type and press ENTER then these fields disappear. This is because the field 'Application' was designed when only the storage is archive, vault or SAP-SYSTEM was possible and the number of added originals was limited.
Currently DMS allows storage of originals on Content Server and there is no limit on the number of added originals, the system behavior was changed due to performance reasons. To avoid performance problems if you search for a document with a lot of originals attached this field gets invisible if you enter a document type which uses the KPRO storage.
Regards,
Pradeepkumar Haragoldavar

PR Release Strategy tab processor field is not getting displayed

Hi Experts,
While creating Purchase Requisition, In the Release Strategy tab processor field is not getting displayed which should be showing the name of the user id which has been configured in the SPRO.
SPRO--> Rel Proc for PR > Rel Group> Rel Code--> Object type (US) and --> Agent (User id who has to approve the PR).
release strategy - Release code -work flow 1
That processer name is not displaying
Thanks
chandoo

This is the workflow forum.

ADOBE Interactive Form not getting displayed in Browse

Hi,
Currently I am working on EhP4 project on ECC 6.0 environment. For HCM, We have interactive ADOBE forms for MSS. While testing we found that all buttons are displayed in a browser (we are are window 7 IE 8 ) but interactive form is not getting displayed in the browser (Fill out Form as part of MSS). It only displays a line
Checked ADS configuration as per oss note and works ok. Did HTTPWATCH - browser is getting (GET) the Adobe forms with values but not displaying it. If I copy URL from HTTPWATCH GET line in a separate browser window it displays the form.
Thanks in advance your help.
Regards
Jitendra Pongurlekar

Hey Chris (and others),
We were having this same problem, and this Note fixed the issue (thanks!). However, we are still experiencing another issue with HCM Processes and Forms under EhP4. Before this Note, it took about ten minutes before "single line display" would show up. Now after the Note, we get the full form, but it still takes ten solid minutes of waiting before it appears in the window. We're pretty sure it's not a Portal issue, nor an ADS issue, but something with the web dynpros on the ABAP side. However, we have not yet been able to resolve it. Anyone else run into this performance problem with HCMP&F after upgrading to EhP4? We don't have the problem with EhP3.
Best regards,
Matt

Values not getting displayed for members which doesnt have parents

Hi
I created a product dimension with 4 levels .For members which doesnt have parents,data is not getting displayed in JavaClient.
The values for members which doesnt have parents are getting displayed in the view created for the measures which are dimensioned by Product .I mapped the same view in the CWM2 work space ,but value is not getting displayed for members which doesnt have parents ,but values are getting displayed for members which have parents for measures.
Is it a bug , we were able to do it in Express ..
Can anybody help us in doing this.??
Thnx in Advance......

Hi,
This assumes that the members which do not have parents are mapped to the top level in the hierarchy. If they are at a level below the top level then they are not part of the hierarchy and therefore would not be displayed. So this sounds like expected behaviour.
Hope this helps
BI Beans PM Team
Oracle

Workitems are not getting displayed in UWL

Hi All,
We have deployed ESS/MSS Business packages in our system. Also configured UWL to display workitems in portal. But when testing leave request, leave request workitems are not getting displayed in portal as UWL. Any help on this will be appreciated.
Thanks,
Krish.

Hello,
have created some new users and done with the leave request, it comes to backend inbox, but not
visible in portal. Re-configured UWL, but still the task not coming( leave request). For other users it is > coming?
Where have you created these users? Many times it is not enough to create new users in a backend system. You will have to create them in the data source which is used by the UME of your portal or to map this data source with the system where you have created your new users
You can see what data source your portal is using by going to
Portal --> System Administration --> System Configuration --> UME Configuration --> Data Source
If this Data Source doesn´t contain your new users, then UWL wouldn´t be able to show their items.
Here you can check if your user is contained in the data source:
Portal --> User Administration --> choose the right data source --> put in the username --> search
Please check if your users are correctly created.
Regards,
Iris

Field value not getting updated in R/3

Hello Experts!!
I am facing a problem while updating a field value back in R/3.
The Syncbo is of type U01 and the field has data type char 40.
The meRepMeta.XML file has following description
Field name="DESCR1" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="modify">false</Input>
1) when i test the function module in R/3. The field value is gets updated.
2) when i create a record for the sync BO from client , i can see the field value being created on the client.
3) when i synchronize, i dont get any error or warning and get a successful message.
S 15.07.2008 12:19:09 All updates for one TOP block were successful (seq. no.=65, TOP cntr.=0000000001)
15.07.2008 12:19:09 Synchronizer UPLOADER completed successfully (mobile ID=0000002646, SyncBO=ZDBMSERORD)
I am not able to locate where is the problem
Please suggest!!
Regards,
Priya Ghosh

Hi,
please check your maping in the create handler in MEREP_SBUILDER. Perhaps the value is created on the client but not mapped to the field of the function module. Furthermore have a look into MEREP_MON and see if the data gets forwarded in there.
At last I would dump the information received by the function module into a table without any logic. So you can see what data actually is forwarded into the funct module - if brake point i not possible.
Hope this helps.
Regards,
Oliver

Xpath field details not getting displayed

Hi all,
I am working on a idoc to file scenario, where I want to refer the receiver to be determined based upon certain condition or values that get populated for a particular field (using receiver determination). But the problem is that when I click on the condition tab on receiver determination I get a warning "Problem loading schema description"
with message as
"Message interface does not exist in any software components installed on this business system"
But since it is an Idoc at the source we dont have any msg interfaces, further if i neglect this warning message and go further, I am not getting the fields or details of the Idoc structure getting displayed in the xpath.
But the same when I use for a file scenario(file as sender) I get the details of the context object if any.. Let me know how to resolve this..
Thanks in advance
Regards,
Nithiyanandam

Hi,
Yes you coudl add the missing Software component as per below steps
Even if you open Business system in Integration Directory, at last tab "Other Attributes" --> you will find the list of software components.
Press the tab Third Party service to verify the list against SLD.
If its not avaialbel in SLD
1. Goto System Landscape Directory
2. select Business Landscape and slect the apporpriate Business system and open it. (Click the name of BS)
3. There you will get the list of Software components added in it.
4. Verify the technical system name.
5. Also verify if same technical system name is used after importing the software component in Integration Repository (IR).
Goto IR -- > Explore the SCV -->Double click on name of software component version -->Check Interface Import as Import of RFC and have the same details in Connection data as per technical system
If everything is setup just refresh the SLD_CACH and import the scenario once again in Integration Directoy and process it.
You will see the IDOC in Business system.
Thanks
Swarup
Edited by: Swarup Sawant on Feb 4, 2008 8:00 AM

Time From field is not getting displayed in correct format in Activities

Hello Experts ,
We are facing one problem in UI , when we search for Activities in Web UI . In the field "Time From" we are not getting the time in correct format , ie is instead of getting time as say 13::38 we are getting time as 13::3 , but when we place cursor on it the field it shows correct format say 13::38.
Can any one suggest how to display in correct format ?
Regards
Vinayak

Hi,
Its an SAP Product error.
Please check note 1151821 ,if you facing the greyed button in time.Also the other note 1136402 needs to be applied for time display issue
- Bobby

Hierarchy value not getting displayed in WAD.

Dear all,
We have a Hier Variable for Business Area, it is there in the Filter area of the query.
when we execute the report in WAD through Portal , we are getting the Values restricted with Hier variable. But in the WAD report we have created filter Tab , which will display the values entered in the Variable screen wil display. But for this Business Area Hier Variable , we are not getting this displayed. when we use the Char variable for this we are getting the values in the WAD report Filters.
we need to display the hier value entered in the variable screen to be displayed in the filter tab of WAD Report
Regards,
srinivas
Edited by: srinivasaraju Penmetsa on Jun 25, 2009 1:06 PM

Dear,
Maintain JEX1 & JHX1 as 100% in ur condition Type.
Also maintain in SPRO , in Classifucation Condition type as
TAXINJ JHX1 AT1SETOFFT AT1 Set Off condition Total
TAXINJ JEX1 ECSSETOFFT ECS Set Off condition Total
Regards,
Pardeep Malik
Edited by: Pardeep Malik on Mar 4, 2009 1:05 PM
Edited by: Pardeep Malik on Mar 4, 2009 1:07 PM

OAF - Values not getting displayed in Search Page

Hi all,
I have developed a search page with the search citeria mapped to the search panel. I have created VO for this attribute and selected the value from View in this VO(Viewobject). I have created the Query region and set the property of Construction mode as autocustimazationcrietria.
Now my problem is when am running this page and search through any value or simply if i pressed the Go button,no value is being displayed in the page.
I have checked the value and same view and the query is returning value in Toad.
If someone can helpout this issue,it would be great help for me.
Thanks,
Renu.

Hi Renu ,
Since its working perfect for other query , it should also work for the query you have mentioned above .
Please make sure that you have shuttle the VO to the AM , and check the View Instance name and View attribute
for every field that are there in the query region is appropriate .
You can also run the below query with the search criteria parameter by passing it in where clause (run it from sql developer / toad ) , and check
whether you are able to get the result set in back end .
SELECT hca.attribute1 division, acac.customer_name,
hca.account_number customer_number, acac.collector_name collector,
NVL (acac.overall_credit_limit, 0) credit_limit,
NVL (acac.credit_available, 0) available_credit,
NVL (acac.balance, 0) open_balance,
acac.customer_status customer_status
FROM hz_cust_accounts hca, ar_customer_accounts_ce acac
WHERE 1 = 1
AND acac.customer_number = hca.account_number
AND acac.currency_code = 'USD'.
Keerthi

ECess Value not getting displayed in MIGO

Dear All,
When I do a GR against a PO the Ecess Value doesnt flow in MIGO. ( PO created with Non-deductible excise tax code.)
Please note the below details also.
We are using SAP 4.7 version & our tax procedure is TAXINJ.
So can anyone explain how the excise values are determined & displayed in MIGO in case of Non-Deductible excise?
Note: My BED & S&H cess values are displayed in GR but not ECess.
Awaiting your valuable replys.
Regards,

Dear,
Maintain JEX1 & JHX1 as 100% in ur condition Type.
Also maintain in SPRO , in Classifucation Condition type as
TAXINJ JHX1 AT1SETOFFT AT1 Set Off condition Total
TAXINJ JEX1 ECSSETOFFT ECS Set Off condition Total
Regards,
Pardeep Malik
Edited by: Pardeep Malik on Mar 4, 2009 1:05 PM
Edited by: Pardeep Malik on Mar 4, 2009 1:07 PM

Values not getting displayed from first page of the report.

Values in the report is getting displayed from second page.
First page in the report only displaying the report title and column names.
Secone page onwards, data and column names are generated.
Can any one please help me, with the cause of the problem.

what reporting tool?
Interactive Reporting
Financial Reporting

Ouput field is not getting displayed

Hi All,
I created an object type in BOB which gives me ernam field of MARA table on testing.
I need to use that object type in the new workflow in which user inserts a material number and should get ernam (Created by) as an output field.
I tied doing that but on testing , it shows task's status 'COMPLETED' but does not display the ERNAM.
What else I need to do to make it displayed on the screen?
Thanks in advance
Shweta

Hi Vidya,
I used 'SAP_WAPI_CREATE_EVENT' to pass the values. Also , I created an event parameter 'MATERIAL' so that the value can be passed as the event gets triggered then I did the binding of event parameter and workflow container parameter of material.
after that i run the following code in se80.
DATA : MATERIAL like SWR_STRUCT-OBJECT_KEY,
       lv_matnr TYPE mara-matnr.
DATA : wa_event like SWR_STRUCT-EVENT,
       wa_obj LIKE swr_struct-object_typ.
DATA : lv_user TYPE SWC_ELEM VALUE 'INITUSER',
       LV_MATERIAL TYPE SWC_ELEM VALUE 'MATERIAL'.
DATA : T_MSG TYPE STANDARD TABLE OF SWR_MESSAG.
DATA : flg(1) TYPE c.
DATA : it_cont TYPE TABLE OF SWCONT,
       wa_cont like LINE OF it_cont.
wa_event = 'ZCLICK_EVENT'.
Wa_obj = 'ZDEMO_BOR1'.
   MATERIAL = lv_matnr.
   wa_cont-element = lv_user.
   wa_cont-value = sy-uname.
   append wa_cont to it_cont.
   CLEAR : wa_cont.
   wa_cont-element = LV_MATERIAL.
   wa_cont-value = LV_MATNR.
   append wa_cont to it_cont.
   CLEAR : wa_cont.
CALL FUNCTION 'SAP_WAPI_CREATE_EVENT'
   EXPORTING
     object_type             = wa_obj
     object_key              = MATERIAL    "Key field in BOR
     event                   = WA_EVENT
*   COMMIT_WORK             = 'X'
*   EVENT_LANGUAGE          = SY-LANGU
*   LANGUAGE                = SY-LANGU
    USER                    = SY-UNAME
*   IFS_XML_CONTAINER       =
* IMPORTING
*   RETURN_CODE             =
*   EVENT_ID                =
TABLES
    INPUT_CONTAINER         = it_cont[]
    MESSAGE_LINES           = T_MSG[].
*   MESSAGE_STRUCT          =
   READ TABLE T_MSG WITH KEY MSG_TYPE = 'E' TRANSPORTING NO FIELDS.
       IF SY-SUBRC = 0.
         Flg = 'N'.
         MESSAGE E208(00) WITH 'Error initiating Workflow.'.
        ELSEIF SY-SUBRC <> 0.
         MESSAGE 'Workflow initiated.' Type 'S'.
After this code , I get a message 'Worlflow initiated' but I can not see the value being transferred to the workflow respective container

List Of Values not getting displayed in BI launchpad

Hello All,
When i am running the report in BI launchpad, List of values are not displaying . throwing below error.
Detail Error:
com.businessobjects.sdk.core.server.CommunicationException$UnexpectedServerException: while trying to invoke the method com.businessobjects.mds.olap.protocol.bics.BICSClient.getCube() of a null object loaded from field com.sap.sl.proxyconsumption.services.olapaccessservice.BICSDiscoverServer.bicsClient of an object loaded from local variable 'this'
@The same report is working fine in WEBI Rich client.
I am using 4.1 SPO3 Patch 2
Please Help on this.
Thanks,
Ramesh

Hi,Supriya!
We are having problem looking like that (After report had been made if I click Refresh button and wait for Values for prompts - the same error message appears).
My user is in admin group and if log as Administrator - nothing changes.
Could you give me advice?

Adobe field values not getting displayed in UWL workitem

Similar Messages

Maybe you are looking for