Adobe Flash embeds will not be animated if they are completely hidden by another tab, window, or by scrolling down. If any part of the Flash is made visible, it will play again.

Pretty much what's up there.
If there's a Flash open, and I scroll down/open a window/open a new tab such that it is not visible anymore, it will not be animated. It freezes until any portion of it is visible again. This wasn't happening before a flash update, I believe.

They will stay on the screen. However, Process Monitor is only intended for advanced users. It is recommended that users try to navigate to the troublesome registry key using regedit, and see if they can access it or not without an error. This is far easier than trying to use Process Monitor, which is very complicated.
I used Process Monitor to confirm that it was just that key which was causing the problem, and not others. Process Monitor is not to be confused with the new Resource Monitor which is accessible via Task Manager in Windows 7 (and possibly Vista). If you must experiment (and Process Monitor is very useful for diagnosing many deep-level problems if you know what you're looking for) Process Monitor can be downloaded from here:
http://technet.microsoft.com/en-us/sysinternals/bb896645
It replaces the older Sysinternals "FileMon" and "RegMon". For those interested in the technical side, I had to setup a number of filters to be able to get the results display as in the screenshot. First of all to just show Registry events. Then to just show events from the manual Flash activeX installer executable. The I added a filter to show only non-successfull results. And finally, for the purposes of the screenshot, added a filter to just show those with "Access Denied", since other non-critical errors are also picked up due to missing keys because installation has not yet been fully completed I guess. When experimenting, most of these filters were applied using the "is not" boolean logic, which will make sense if you experiment with the program.
Without adding any filters, it picks up so many events (hundreds per second) that it's otherwise unusable. e.g. 40,000 events within the first few seconds of opening the program. For this reason, I recommend simply using Regedit to diagnose the problem with the particular Flash registry key.

Similar Messages

I am trying to print redplum coupons and I can't, help. I have updated java, adobe flash, and made sure my printer was set on default. I am not sure what I am doing wrong. I have contacted redplum and no one will help.

I am trying to print redplum coupons and I can't, help. I have updated java, adobe flash, and made sure my printer was set on default. I am not sure what I am doing wrong. I have contacted redplum and no one will help.

No Apple response??? Redplum/Valassis will not help either. I searched, using the cups error message and though it is Unbuntu, same error so maybe useful...only problem: details would not display unless I join Unbuntu forum. What a pain to do anything with my Mac or find any help. I honestly regret buying this buggy OS.
Anyway, here is what I found, FYI:
http://ubuntuforums.org/showthread.php?t=483415
As the old saying goes: when in doubt, consult the manual. The problem appears to be that I added the printer using the KDE Add Printer Wizard. It was automatically given a "socket" URI instead of an "lpd" one. When I:
- altered the printer settings at http://localhost:631 (the CUPS admin page) as instructed in the manual for the printer, and
- copied the PPD file into a second place on the hard drive (as instructed on ubunutuforums, see the link above)
..everything started working.
It's still slower than windows, but I can live with that
Probably a simple fix. Change the socket I.P. to match the printer I.P. like this:
socket://192.168.1.86:9100. The thing I'm concerned with using socket:// is that AFAIK the printer I.P. must not change. In my case I'm able to assign a static I.P. address to the printer but it's something to consider.
I found that the only thing I needed to do was change socket to lpd (and remove :9100 off the end as well). See Solving Ubuntu printer broken pipe problem (DocuPrint C525A) . BTW thanks for steering me in the right direction - very grateful.
Solving Ubuntu printer “broken pipe” problem (DocuPrint C525A)
Posted on November 25, 2008
Are you having a problem with your printer under the latest versions of Ubuntu (perhaps it worked under an older version)? Are you able to print short documents, but not longer, or more graphics-intensive, documents? (e.g. the unfortunate people at http://ubuntuforums.org/showthread.php?t=625493). Do they sit there as Processing for ages and then switch to Held? If you have the same problem I had the solution I tried may work for you too. Firstly, check your cups error log:
sudo gedit /var/log/cups/error_log
If you see anything like the following, the solution may be simple:
[Job 201] Unable to write print data: Broken pipe
PID 13359 (/usr/lib/cups/backend/socket) stopped with status 1!
System > Administration > Printing and right click on your printer, selecting Properties. Settings > Device URI
If you see something like socket://your_printer_ip_address:9100 just change socket to lpd and remove the :9100 off the end. Then click on apply.
Apparently lpd is a more modern protocol which works with most printers whereas socket is more raw (and potentially faster but riskier in a network situation). Somewhere along the line, the default Ubuntu/Gnome setup for networked printers shifted from lpd to socket. Some primitive printers will have benefited whereas a larger number of more modern printers will have suffered.
Please correct me if I am wrong (which is highly possible) but the underlying problem could be that socket may make the printer wait a long time for a large file to be processed ready for printing. Some printers, such as the Fuji Xerox DocuPrint C525A, may drop the socket if things take too long to start coming through.
Changing timeout settings might work but lpd is better than socket so it is the preferred solution in any case.
If this works for you, please leave a comment to let others know (ideally with a description of the printer and Ubuntu version). Printer may be relevant if it doesn’t support the direct stream protocol properly. NB I may take a while to let your comment through because of the volume of spam. Sorry about that.
Finally, thanks to sphilli8 for the steer in the right direction at http://ubuntuforums.org/showthread.php?p=6245626.
http://ubuntuforums.org/showthread.php?t=483415

I just bought an Ipad and find that it is not compatible with Adobe flash player which I need to play Bridge on line on BBO. Is there a solution for this problem?

I just bought an I pad abd find that it is compatible with Adobe Flash Player which I need to play bridge on BBO. Is there a solution to this problem?

No Flash for iPads, iPhones, or iPods
Here's why there's is no Flash available for iDevices or other mobile devices. Adobe was unable to provide a product that was suitable to the needs of battery powered mobile devices used for Internet browsing. Existing Flash technology used too much memory, ate battery life, and was buggy. Simply put Flash did not work well on mobile devices.
Apple's Steve Jobs led the escape from Flash dependency when Apple introduced the iPhone, and later introduced the iPad. There was a hue and cry over the omission. Time proved Jobs was right on target.
So this is why there is no Flash for your iPhone or iPad or iPod nor for most SmartPhones. Flash has been abandoned by many sites in favor of supported technologies such as HTML5 or by providing their own custom app.
Here is Steve Jobs official comment on his momentous decision to omit Flash from iDevices: Steve Jobs on Flash.
Here is Adobe's later announcement to cease development of Flash for mobile devices: Adobe on Mobile Flash.
Now, you are not necessarily out on a limb. There are some apps that can display some Flash, but don't count on there ability to display anything using Flash.
Apps that can display some Flash from the Web:
Puffin
SkyFire
Photon Flash
Browse2Go
iSwifter
Also, note that many sites that use Flash provide their own app for accessing their material. So check with your favorite sites and find out if "there's an app for that."

Help! CC has been withdrawn by Adobe saying I have not paid even though they have taken the money fr

Help! CC has been withdrawn by Adobe saying I have not paid even though they have taken the money from my account. Why?

Thanks. I do not think that the phone is stolen as I have been able to get it unlocked and surely the phone would be repoted stolen and blocked. What I do not ubderstand is that I thought icoud was just somewhere to back up your data instead of saving it to your computer if that is the case why is it stopping the actual hone from loading the previous owner rest it to factory settings before selling it but refused to get it unlocked. The phone would work with a Vodaphne sim as I understand it althought I did not try before i gave it to a shop to unlock. surely they would have knon before unlocking that there was a problem with icloud and that they woyld not be able to do it. The phone shop are insisting tgat I pay £40.00 for te unlck which they say is done or tey will not et me have the phone back does what they are saying seem right and is it reasonablefor them to expect me to ay for a dud phone??

Why do have to download adobe flash player every other day, when playing facebook games?

I play facebook games and some need adobe flash player. I have to download it everyother day why?

windows 7 is the system
Internet explorer
In a message dated 7/14/2013 12:41:31 P.M. Mountain Daylight Time,
[email protected] writes:
Re: Why do have to download adobe flash player every other day, when
playing facebook games?
created by C F McBlob (http://forums.adobe.com/people/CFMcBlob) in
Installing Flash Player - View the full discussion
(http://forums.adobe.com/message/5498048#5498048)

Okay, so my iphone 4s will not charge at all. I been charging it on my windows laptop, and it just stopped charging. even on the wall. What should I do? Help.

Okay, so my iphone 4s will not charge at all. I been charging it on my windows laptop, and it just stopped charging. even on the wall. What should I do? Help.

Wow long time ago to find a thread...
Hold the power and home button while connected to your computer for 10 seconds. Then release JUST the power button and continue holding the home button and iTunes should recongnise the device in recovery and then hit restore and iTunes will proceed to wipe the phone and restore to the latest iOS your device can go too.

My iTouch will not show movies, but they are showing on my iTunes. When I try and play them through my iTunes it freezes on me and does not work.

My iTouch will not show movies, but they are showing on my iTunes. When I try and play them through my iTunes it freezes on me and does not work. This problem only occurs whenever I am using my netbook. It doesn't happen when I use a different computer. I tried uninstalling and reinstalling itunes and am not sure what else to do from here.

You may have transferred all your songs, but your iPad is seeing the library as a different entity.
The following article(s) may help you.
Moving your iTunes library to a new computer

I recently deleted many duplicate files. In the midst of it my Itunes songs are not in Itunes. They are in two different folders. One under 'Music' in my ID. And two under a MyMusic file in Documents. How do I know which one to import?

I recently deleted many duplicate files. In the midst of it my Itunes songs are not in Itunes. They are in two different folders. One under 'Music' in my ID. And two under a MyMusic file in Documents. How do I know which one to import?

Thanks, this is not an ideal answer but probably the most sensible one in my case.
I will try it unless someone has a better suggestion, but I'll wait a bit as it will take me a few days anyway (I had actually tried to create a new smaller playlist or download by album, but at this stage the music app is not letting me queue a list of songs for download - I think I will have to disable and re-enable iTunes match which will probably delete all the songs).
I have to say I am not very impressed with Apple here - having an online backup of all your data and beeing able to restore it to a new device easily was a strong selling point of iCloud. For music, they are Definitly not delivering at the stage.

Configure not finding dependencies but they are installed!

Hi, I was just trying to install pychosynth from AUR via yaourt, but configure just keeps complaining about SoundTouch and Liblo not being installed, however they are.
I tried to fix it by downloading Debian's Lenny libSoundTouch .deb file and then extracting the libs and links to /usr/lib but there was no luck anyways.
Here is my configure output:
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for g++... g++
checking for C++ compiler default output file name... a.out
checking whether the C++ compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognize dependent libraries... pass_all
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... gfortran
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether gfortran accepts -g... yes
checking the maximum length of command line arguments... 98304
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for gfortran option to produce PIC... -fPIC
checking if gfortran PIC flag -fPIC works... yes
checking if gfortran static flag -static works... yes
checking if gfortran supports -c -o file.o... yes
checking whether the gfortran linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for LIBLO... no
checking for LIBXML... yes
checking for SNDFILE... yes
checking for SOUNDTOUCH... no
checking for VORBIS... yes
checking sys/soundcard.h usability... yes
checking sys/soundcard.h presence... yes
checking for sys/soundcard.h... yes
checking for ALSA... yes
checking for JACK... yes
checking for OGRE... yes
checking for CEGUI... yes
checking for CEGUIOGRE... yes
checking for OIS... yes
configure: error:
*** You need libSoundTouch to compile the program.
*** Install it and run this script again.
make: *** No se especificó ningún objetivo y no se encontró ningún makefile. Alto.
And here's the AUR package I'm using:
http://aur.archlinux.org/packages.php?ID=16898
Thanks for your continued help

Ok, good and bad news.
It seems that it was missing some development libreries to compile, and because I couldn't find them elsewhere I decided to grab them from Debian's site, so I took lenny's libsoundtouch1-dev package and manually installed it, so now I get this while building:
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for g++... g++
checking for C++ compiler default output file name... a.out
checking whether the C++ compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognize dependent libraries... pass_all
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... gfortran
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether gfortran accepts -g... yes
checking the maximum length of command line arguments... 98304
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for gfortran option to produce PIC... -fPIC
checking if gfortran PIC flag -fPIC works... yes
checking if gfortran static flag -static works... yes
checking if gfortran supports -c -o file.o... yes
checking whether the gfortran linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for LIBLO... no
checking for LIBXML... yes
checking for SNDFILE... yes
checking for SOUNDTOUCH... yes
checking for VORBIS... yes
checking sys/soundcard.h usability... yes
checking sys/soundcard.h presence... yes
checking for sys/soundcard.h... yes
checking for ALSA... yes
checking for JACK... yes
checking for OGRE... yes
checking for CEGUI... yes
checking for CEGUIOGRE... yes
checking for OIS... yes
configure: creating ./config.status
config.status: creating libpsynth.pc
config.status: creating Makefile
config.status: creating doc/Doxyfile
config.status: creating src/Makefile
config.status: creating data/Makefile
config.status: creating libpsynth/Makefile
config.status: creating libpsynth/version.h
config.status: creating config.h
config.status: executing depfiles commands
* Psychosynth 0.1.1: Automatic configuration OK.
* Configuration summary:
* 3D client (psynth3d) ..... yes
* CLI client (psynth) ...... no
* OSC support: ............. no
* XML config support: ...... yes
* SoundTouch support: ...... yes
* PCM support: ............. yes
* OGG support: ............. yes
* OSS support: ............. yes
* ALSA support: ............ yes
* Jack support: ............ yes
* Translations: ............ Not suported.
* Installation directories:
* Program: ................. NONE/bin
* Data: .................... /usr/share/psychosynth
* Library: ................. NONE/lib
* Includes: ................ /usr/include/libpsynth
* Type 'make' to compile.
* Then type 'make install' to install.
* Have fun!
make all-recursive
make[1]: se ingresa al directorio `/tmp/yaourt-tmp-ltsmash/aur-psychosynth/psychosynth/src/psychosynth-0.1.1'
Making all in libpsynth
make[2]: se ingresa al directorio `/tmp/yaourt-tmp-ltsmash/aur-psychosynth/psychosynth/src/psychosynth-0.1.1/libpsynth'
/bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/libxml2 -I/usr/include/alsa -march=i686 -mtune=generic -O2 -pipe -MT libpsynth_la-Director.lo -MD -MP -MF .deps/libpsynth_la-Director.Tpo -c -o libpsynth_la-Director.lo `test -f 'psynth/Director.cpp' || echo './'`psynth/Director.cpp
mkdir .libs
g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/libxml2 -I/usr/include/alsa -march=i686 -mtune=generic -O2 -pipe -MT libpsynth_la-Director.lo -MD -MP -MF .deps/libpsynth_la-Director.Tpo -c psynth/Director.cpp -fPIC -DPIC -o .libs/libpsynth_la-Director.o
In file included from ../libpsynth/common/ControlBuffer.h:27,
from ../libpsynth/object/Object.h:33,
from ../libpsynth/table/Patcher.h:30,
from ../libpsynth/table/Table.h:32,
from ./psynth/Director.h:29,
from psynth/Director.cpp:24:
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:80: error: '::memchr' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:81: error: '::memcmp' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:82: error: '::memcpy' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:83: error: '::memmove' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:84: error: '::memset' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:85: error: '::strcat' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:86: error: '::strcmp' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:87: error: '::strcoll' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:88: error: '::strcpy' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:89: error: '::strcspn' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:90: error: '::strerror' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:91: error: '::strlen' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:92: error: '::strncat' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:93: error: '::strncmp' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:94: error: '::strncpy' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:95: error: '::strspn' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:96: error: '::strtok' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:97: error: '::strxfrm' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring: In function 'void* std::memchr(void*, int, size_t)':
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:101: error: invalid conversion from 'const void*' to 'void*'
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:101: error: initializing argument 1 of 'void* std::memchr(void*, int, size_t)'
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring: At global scope:
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:103: error: '::strchr' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:109: error: '::strpbrk' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:115: error: '::strrchr' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:121: error: '::strstr' has not been declared
In file included from ../libpsynth/table/Patcher.h:30,
from ../libpsynth/table/Table.h:32,
from ./psynth/Director.h:29,
from psynth/Director.cpp:24:
../libpsynth/object/Object.h: In destructor 'virtual psynth::Object::InSocket::~InSocket()':
../libpsynth/object/Object.h:141: error: 'for_each' was not declared in this scope
make[2]: *** [libpsynth_la-Director.lo] Error 1
make[2]: se sale del directorio `/tmp/yaourt-tmp-ltsmash/aur-psychosynth/psychosynth/src/psychosynth-0.1.1/libpsynth'
make[1]: *** [all-recursive] Error 1
make[1]: se sale del directorio `/tmp/yaourt-tmp-ltsmash/aur-psychosynth/psychosynth/src/psychosynth-0.1.1'
make: *** [all] Error 2
Have you got any ideas of what went wrong?
Thanks.

Can I put the 2Gb RAM (X2) from my MacBook Pro into my MacBook 5,1? The intel is different (2Ghz not 2.3) and the speed is 1067 not 1333. But they are both DDR3.

Can I put the 2Gb RAM (X2) from my MacBook Pro into my MacBook? The intel is different (2Ghz not 2.3) and the speed is 2000 not 1333. But they are both DDR3.
I have just upgraded the Pro to 16Gb and the MacBook is SO slow. Just wondering if I could use the old RAM.

Full specification of MB5.1 RAM;
204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM, non-ECC (non parity), unbuffered.
MBP8.1, 8.2 or 8.3;
204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM, non-ECC (non parity), unbuffered.
PC3 is the same as DDR3. the number is peak transfer rate (approximated).
Further reading suggests your swap may work, but it's not guaranteed. If you get 3 beeps on start up (or the sleep light flashing in bursts of 3), first check it's correctly seated, but be prepared to swap them back.
If you encounter any instability or kernel panics, change them back.

New thunderbird won't send messages saying some of my addresses I've used for years are not right syntax but they are.

Setting up different computer since lightning strike took out my ethernet (but not much else). Using Mint Linux 13. New setup on this computer with all the latest updates including Thunderbird 31.
Have imported my old addresses that I've been sending to for years but this new t-bird will not allow some emails saying they are not proper sytax when they are. Nothing has changed on the addresses, just Thunderbird has changed. Because of these few it refuses, it won't sent ANY emails now except for replies. Replies using the very same addresses go through with no problem. Lately it finds just one address it refuses but when I take that one out (have to start over now - won't allow me to delete) then it comes up with a whole other list and DOES NOT SEND ANYTHING. This is damned frustrating, to be frank.

What is the exact error message?

I cannot make the update of the iphone any more because the preceding owner made the jailbreak blow my telephone does not want to be re-ignited more and N accepts any restoration which must I make? thank you m to help

I cannot make the update of the iphone any more because the preceding owner made the jailbreak blow my telephone does not want to be re-ignited more and does not accept any restoration which must I make? thank you to help me

To put your iPhone back in jail do a restore.
This will put iPhone back into factory condition and you can get your updates (assuming you want the updates).

I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."

I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."

Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that.

How do you select and move more than one bookmark at a time? Shift+Click does not select multiple items that are next to one another in a list because the item

How do you select and move more than one bookmark at a time?
Shift+Click does not select multiple items that are next to one another in a list because the items open in firefox before this happens.

Use the bookmarks library. You may use Shift +Click, and Ctrl + Click to create groupings of selected bookmarks to drag and drop.
* one method of opening the bookmarks library is keyboard shortcut <br /> Ctrl+Shift+B (Windows)
*see also [[How to use bookmarks to save and organize your favorite websites]]
*and [[Use bookmark folders to organize your bookmarks]]

Trying to down load Itunes but I get a message : There is a problem with this Windows Installer package a program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.

When downloading Itunes I get this message:
There is a problem with this Windows Installer package a Program run as part of the setup did not finish as expected.
Contact your support personnel or package vendor..
is there a number for me to call or can someone explain what has happen...
Thank you for your help....

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Adobe Flash embeds will not be animated if they are completely hidden by another tab, window, or by scrolling down. If any part of the Flash is made visible, it will play again.

Similar Messages

Maybe you are looking for