Adobe flash error when opening a file is closed and leaves open the file

the problem is this I try to open a file FlippingBook Publication and try to open it immediately closes and says there are problems with adobe flash player 10.1 r102 you uninstall and reinstall the latest version adobe the problem continues, anyone know how to fix it?

adobe flash player 10.1 r102
Is there a specific reason you're using a five-year-old Flash Player version?

Similar Messages

Getting Adobe Lifecycle Error when opening the pdf document to provide comments

Hi All,
I am getting AdobeLifeCycle Error message when I am trying to give comments in the pdf document.
I have a workaround in place for the same but I want a permanent fix.
PFB the workaround for the same:
1.Delete the Adobe folder from the users local profile, under the following folders:
C:\Users\”login”\AppData\local
C:\Users\”login”\AppData\locallow
C:\Users\”login”\AppData\Roaming
2.Delete the contents of the temp file on the C Drive
Please let me know if some one has faced this issue and have been successful in finding a permanent fix.
Thanks & Regards,
Aniket Deshmukh

PFB the error message:
Adobe LiveCycle Review Connector - File Not Found’

FM GUI_UPLOAD gives PC036 "Error when opening the download file".

Dear all
I'm having a problem with a particular PC.
A program which calls FM GUI_UPLOAD gives the error PC036 "Error when opening the download file".
The file we are trying to upload is a text file, with tab delimiter.
If the same user executes the same program from another PCs, it works fine.
If another user executes the program in the "problematic" PC, it gives the error.
So, the problem is PC-related.
I checked SAP GUI Codepage, and was the same as other PCs.
I cheched regional configuration, and was also the same as other PCs.
The operating system is Windows XP, and the SAP GUI version is 7.10, File version 7100.2.7.3077, Build 967944 , Patch level 7.
SAP version is ECC6.
I searched across forums, SAP note, and the web, but I couldn't find anything.
I would be grateful if someone could give me ideas.
Thanks in advance
Jordi

Hello. The user accounts are have same privilegies (like both are "Power users")? Also the file system are the same in both PC NTFS or FAT32 (today i'm find FAT32 in enterprise ) If NTFS may be some Domain politics are not allow to save file correctly, or space are not enough....Try check this first...Regards.

Error When Opening the Setup/Transactions/ Sources Window

Hi All,
in Oracle E-Business Suite R12 Version
Error When Opening the Setup/Transactions/ Sources Window
APP-FND-01388: Cannot read value for profile option FND_DEVELOPER_MODE in routine &ROUTINE.
ORA-01403: no data found
FRM-40735: WHEN-CREATE-RECORD trigger raised unhandled exception ORA-06502.

Amr,
Please see the suggested solutions in these docs.
App-Fnd-01388: Cannot Read Value For Profile Option Fnd_developer_mode In Routine [ID 563884.1]
R12: How To Avoid The Error Message APP-FND-01388 On Drilldown [ID 556668.1]
R12 APXINWKB Error APP-FND-01388 When Trying To Query Invoice [ID 864195.1]
APP-FND-01388 Cannot Read Profile Option FND_DEVELOPER_MODE In Benefits Service Center Form [ID 422182.1]
Thanks,
Hussein

Error When Opening the Transactions/Transactions Window

Hi All,
in Oracle E-Business Suite R12 Version
Error When Opening the Transactions/Transactions Window
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "APPS.AR_MO_GLOBAL_CACHE", line 55
ORA-06512: at "APPS.ARP_STANDARD", line 2912
ORA-06512: at "APPS.ARP_GLOBAL", line 282
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-06502
Can any body help about the error
Thanks in advance.

Did you go through the below notes:
Note:125204.1, Note:153207.1 and Note:191306.1.

I am getting an error when opening the organizer saying online services could not be initialized?

I just installed photoshop elements 11 on my Mac and am receiving an error when opening the organizer. It is stating that online services could not be initialized and that I need to reinstall. I tried that and it is still coming up. What do I do?

How did you uninstall it?

There is an error when opening the safari page.

There is an error when opening webpages which contain web videos. How to fix it? Thank you

I just updated the system and reinstalled safari. The error has gone away. Thank you

Error when opening the file

Hi all,
we are sending the purchase orders from SAP to Third party system as file using IDOC to File scenario.
In XI side successfully gone through in MDT also i didnt see any errors.
But when we open the file in third party system its giving errors.
Can anybody face this problem before please tell what cause the problem.
the file is PurchaseOrder_20071730-121942-758.txt
This is the time stamp in the file what time must be in MDT for this message because i didnt see any 12-19-42 time in MDT is there any time difference in the file and MDT if it is what time must i see it in MDT for identifying the message.
Answer will be rewarded.
Prasad.

Hello Prasad,
You can see the filename in MDT.
In your reciever file adapter you will see theres a link below message id. click on that.
new window will open . Click on the page down button you will see something like this..
<i>2007-08-02 11:43:48 Success Write to file "
10.1.1.35\xi_public\inbound\in20070802-114348-390.xml" as binary, size 460 bytes</i>
Regards,
Sumit

Adobe DRM error when opening a digital book

Hi. I receive the following error when I attempt to open a digital version of a book that I purchased a few years ago:-
Borland_C___Builder__The_Co.pdf:
Adobe DRM Error
System: 7
State: 4
Class: 15
Code: 31
Message: Error on response from server.
Scroll below or view error.log for more details.
Your Adobe software could not be activated.
HTTP error on Adobe DRM Activator request.
Adobe DRM Activator error.
Client Code: 31 - HTTP Code: 555
Fault location: 15
--- end ---
Can any one help me to resolve it please?
Marcus

What a truly awful policy.
So, here I am coming back to an ebook I purchased three years ago, only to find that it's *my* fault I cannot access the book I paid for, because I should have been studiously following the intricacies of your petty updates and server migrations, or else I simply lose my rights to access the book (access rights, by the way, that are apparently now controlled not by the author -- whom I know personally -- or the publisher, but by you clowns at Adobe!?!).
Really lame, adobe. Really lame.
I should have bought the hard copy, which I could have taken off the shelf whenever I wanted, years after purchase, without having to worry about whether or not I migrated my license to whatever server, etc etc.
Really appalled by this.

Getting error when open the file

Hi,
I am getting
" getOutputStream() has already been called for this response " when i wanted to open a file. Pls advise why I am getting this error and solution to tackle the error.
Thanks

Hi,
Thanks for the reply.
I am running jsp on jboss server. Previously, I was using java version 1.2.2 and the codes was working fine. But when i migrate the codes to jboss 3.2.5 with jdk 1.3.1_13, it throws the following error.
ERROR [org.jboss.web.localhost.Engine] StandardWrapperValve[jsp]: Servlet.service() for servlet jsp threw exception
java.lang.IllegalStateException: getOutputStream() has already been called for this response
     at org.apache.coyote.tomcat5.CoyoteResponse.getWriter(CoyoteResponse.java:599)
     at org.apache.coyote.tomcat5.CoyoteResponseFacade.getWriter(CoyoteResponseFacade.java:163)
     at org.apache.jasper.runtime.JspWriterImpl.initOut(JspWriterImpl.java:122)
     at org.apache.jasper.runtime.JspWriterImpl.flushBuffer(JspWriterImpl.java:115)
     at org.apache.jasper.runtime.PageContextImpl.release(PageContextImpl.java:190)
     at org.apache.jasper.runtime.JspFactoryImpl.internalReleasePageContext(JspFactoryImpl.java:115)
     at org.apache.jasper.runtime.JspFactoryImpl.releasePageContext(JspFactoryImpl.java:75)
     at org.apache.jsp.icbbv2.users.DownloadFile_jsp._jspService(DownloadFile_jsp.java:181)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
What i am trying to do is, I am downloading a file stored in Oracle database and open the file based on the file extension, i.e, using ms word for .doc ext .
This i s where it is throwing error:
mySmartUpload.downloadFile(docid,"application/msword",docname,65000);
and the method is as the following:
public void downloadFile(String sourceFilePathName, String contentType, String destFileName, int blockSize)
throws ServletException, IOException
if(sourceFilePathName == null)
throw new IllegalArgumentException(String.valueOf((new StringBuffer("File '")).append(sourceFilePathName).append("' not found (1040).")));
if(sourceFilePathName.equals(""))
throw new IllegalArgumentException(String.valueOf((new StringBuffer("File '")).append(sourceFilePathName).append("' not found (1040).")));
if(!isVirtual(sourceFilePathName) && m_denyPhysicalPath)
throw new SecurityException("Physical path is denied (1035).");
if(isVirtual(sourceFilePathName))
sourceFilePathName = m_application.getRealPath(sourceFilePathName);
File file = new File(sourceFilePathName);
FileInputStream fileIn = new FileInputStream(file);
long fileLen = file.length();
int readBytes = 0;
int totalRead = 0;
byte b[] = new byte[blockSize];
if(contentType == null)
m_response.setContentType("application/x-msdownload");
else
if(contentType.length() == 0)
m_response.setContentType("application/x-msdownload");
else
m_response.setContentType(contentType);
m_response.setContentLength((int)fileLen);
m_contentDisposition = m_contentDisposition == null ? "attachment;" : m_contentDisposition;
if(destFileName == null)
m_response.setHeader("Content-Disposition", String.valueOf((new StringBuffer(String.valueOf(m_contentDisposition))).append(" filename=").append(getFileName(sourceFilePathName))));
else
if(destFileName.length() == 0)
m_response.setHeader("Content-Disposition", m_contentDisposition);
else
m_response.setHeader("Content-Disposition", String.valueOf((new StringBuffer(String.valueOf(m_contentDisposition))).append(" filename=").append(destFileName)));
while((long)totalRead < fileLen)
readBytes = fileIn.read(b, 0, blockSize);
totalRead += readBytes;
m_response.getOutputStream().write(b, 0, readBytes);
fileIn.close();
Pls assist. Thanks in advance.
Rajes

Opening an Excel 2003 file in Office 2010 Universal Data Connection error when opening the file from a domain.

Hi.
One of my users are having problem with old accounting files in Excel 2003 when opening Excel 2010.
The user experience that linked information is not being updated properly.
And suspects that it something do with Universal Data Connection .
How can an Excel 2003 spread sheet be converted to Excel 2010 spread sheet and still contain active links?
When the user is opening and converting the file as mention in your suggestion, on the common share on a common domain, the links "breaks".
we are not using SharePoint on our domain.
But when doing it on a local machine, the links does not "breaks".
Looking forward to get solved to this problem.
Thank you in advance.
Rgds

it sounds link, the links changed from relative paths to absolute path. You need to use absolute path in original file.
KR

Access denied: Adobe PDF error when opening PDF in IE9

Adobe Version: 11.0.3
IE9, Windows 7
Opening the PDF document from web browser opens a "Adobe PDF Document" dialog box with "Access Denied" error message.
However, on clicking "OK" on the dialog box, the PDF document appears in the desired section.
But, still trying to get rid of the access denied error message as this pops up each time a PDF is being opened.
Please help asap.
Thanks.

Hello Adobe technical Team,
I am struggling to fix the issue. Tried a lot of combinations to manipulate PDF preference, browser setting but failed to fix the issue. Can someone please look into the details and advise? Thanks in advance for any help.input.

Adobe reader error when openning an email attachment on ipad.

I can not open Adobe documents sent via email on my iPad since upgrading the app. This is the message:
Please wait... If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document. You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/go/reader_download. For more assistance with Adobe Reader visit http://www.adobe.com/go/acrreader. Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.

Your PDF document is a special type of form called a "dynamic XFA form".
Currently, Adobe Reader mobile products (for iOS, Android, Windows Phone) do not support static or dynamic XFA forms that are created with Adobe LiveCycle Designer. (This is not a new problem, however.)
The message "Please wait..." is displayed when a dynamic content is not supported by a PDF viewer.
Please use the desktop version of Adobe Reader on a Windows or Mac computer to fill out XFA forms.
Sorry for the inconvenience.

Error when opening the PDF attachment

Hi,
We are able to successfully send the PDF attachment to external email id from SAP SCRIPT:
but when we are opening the PDF attachment we are getting the following error:
"Adobe Reader could not open because it is not either a supported file type or the file has been damaged ..etc.."
Is any logic need to write for the above or any parameters are missing .
Can any one help...
Thanks in advance.

Hi Ramana,
            Just try below given example code.....In which I have just different function Module to convert from OFT to PDF....
   AT END OF VSTEL.
      IF R_EMAIL = 'X'.
*--Opening Layout set for Printing
        PERFORM CLOSE_FORM.
       SELECT SINGLE SMTP_ADDR INTO V_EMAIL
       FROM ADR6
       WHERE ADDRNUMBER = T_ADRC-ADDRNUMBER.
        CLEAR T_LIPS.
        READ TABLE T_LIPS WITH KEY VBELN = T_LIKP-VBELN.
        CLEAR T_VBAK.
        READ TABLE T_VBAK WITH KEY VBELN = T_LIPS-VGBEL.
        CLEAR V_ADRNR.
        SELECT SINGLE ADRNR
        INTO V_ADRNR
        FROM T001
        WHERE BUKRS = T_VBAK-BUKRS_VF.
        REFRESH T_CC_EMAIL.
        CLEAR T_CC_EMAIL.
        SELECT SMTP_ADDR INTO TABLE T_CC_EMAIL
        FROM ADR6
        WHERE ADDRNUMBER = V_ADRNR.
     SELECT SINGLE smtp_addr
     INTO cc_email
     FROM adr6
     WHERE addrnumber = v_adrnr.
        IF T_TO_EMAIL[] IS INITIAL.
          CLEAR T_CC_EMAIL.
          REFRESH T_CC_EMAIL.
        ENDIF.
        PERFORM BUILD_PDF_DATA_TABLE.
Populate message body text
        PERFORM POPULATE_EMAIL_MESSAGE_BODY.
        CONCATENATE T_LIKP-VSTEL '-' 'Warehouse Release' INTO V_SUBJECT SEPARATED BY SPACE.
Send file by email as .xls speadsheet
        PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
                                     TABLES IT_MESSAGE
                                            PT_CONTENTS_BIN       "LINES    "it_attach
                                      USING V_EMAIL
                                            V_SUBJECT
                                            'PDF'
                                            'Delivery'
                                            'Deliveries'
                                   CHANGING GD_ERROR
                                            GD_RECIEVER.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
        PERFORM INITIATE_MAIL_EXECUTE_PROGRAM.
      ENDIF.
    ENDAT.
***---/End by sagun
ENDLOOP. "loop at t_likp.
***---/added by sagun 25.05.2007
IF R_EMAIL = 'X'.
    WRITE /01 SY-ULINE(180).
    WRITE :/55 'End of Report'.
ENDIF.
***---/end by sagun
ENDFORM.                    " PRINT_DELIVERY
*&      Form close_form
      text
--> p1        text
<-- p2        text
FORM CLOSE_FORM .
IF R_PRINT = 'X'.                   " added by sagun 24.05.2007
    CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT                         =
RDI_RESULT                     =
TABLES
OTFDATA                        =
     EXCEPTIONS
       UNOPENED                       = 1
       BAD_PAGEFORMAT_FOR_PRINT       = 2
       SEND_ERROR                     = 3
       SPOOL_ERROR                    = 4
       CODEPAGE                       = 5
       OTHERS                         = 6
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.                             " added by sagun 24.05.2007
IF R_EMAIL = 'X'.
*otf_table like itcoo occurs 0 with header line
    CALL FUNCTION 'CLOSE_FORM'
     IMPORTING
       RESULT   = .
         TABLES
           OTFDATA = HOTFDATA
         EXCEPTIONS
           UNOPENED = 3.
ENDIF.
ENDFORM.                    " close_form
*&      Form BUILD_PDF_DATA_TABLE
      text
--> p1        text
<-- p2        text
FORM BUILD_PDF_DATA_TABLE .
DATA : LC_FORMAT(3) TYPE C VALUE 'PDF'.
DATA: lt_tline TYPE tp_tline_standard_table,
DATA : L_BIN_FILESIZE TYPE I,
          PC_CONTENTS_BIN_LINES TYPE I.
CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
      FORMAT                = LC_FORMAT
    IMPORTING
      BIN_FILESIZE          = L_BIN_FILESIZE
    TABLES
      OTF                   = HOTFDATA
      LINES                 = LINES
    EXCEPTIONS
      ERR_MAX_LINEWIDTH     = 1
      ERR_FORMAT            = 2
      ERR_CONV_NOT_POSSIBLE = 3
      OTHERS                = 4.
IF SY-SUBRC = 0.
    CALL FUNCTION 'QCE1_CONVERT'
      TABLES
        T_SOURCE_TAB         = LINES
        T_TARGET_TAB         = PT_CONTENTS_BIN
      EXCEPTIONS
        CONVERT_NOT_POSSIBLE = 1
        OTHERS               = 2.
    IF SY-SUBRC = 0.
      DESCRIBE TABLE PT_CONTENTS_BIN LINES PC_CONTENTS_BIN_LINES.
    ELSE.
... -->
    ENDIF.
ELSE.
An OTF conversion error occured
-->
ENDIF.
ENDFORM.                    " BUILD_PDF_DATA_TABLE
*&      Form POPULATE_EMAIL_MESSAGE_BODY
      text
--> p1        text
<-- p2        text
FORM POPULATE_EMAIL_MESSAGE_BODY .
REFRESH IT_MESSAGE.
IT_MESSAGE = 'Please find enclosed here with our Warehouse Release Document(s)'.
APPEND IT_MESSAGE.
CLEAR IT_MESSAGE.
APPEND IT_MESSAGE.
APPEND IT_MESSAGE.
APPEND IT_MESSAGE.
APPEND IT_MESSAGE.
IT_MESSAGE = 'For United Phosphorous Inc.'.
APPEND IT_MESSAGE.
CLEAR IT_MESSAGE.
APPEND it_message.
APPEND it_message.
APPEND it_message.
IT_MESSAGE = 'TEST EMAIL from 520 clinet please ignore it'.
APPEND IT_MESSAGE.
ENDFORM.                    " POPULATE_EMAIL_MESSAGE_BODY
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
      text
     -->PIT_MESSAGE text
     -->PIT_ATTACH text
     -->P_EMAIL text
     -->P_MTITLE text
     -->P_FORMAT   text
     -->P_FILENAME   text
     -->P_ATTDESCRIPTION   text
     -->P_SENDER_ADDRESS   text
     -->P_SENDER_ADDRES_TYPE   text
     <--P_ERROR text
     <--P_RECIEVER text
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES    PIT_MESSAGE
                                              PIT_ATTACH
                                        USING P_EMAIL
                                              P_MTITLE
                                              P_FORMAT
                                              P_FILENAME
                                              P_ATTDESCRIPTION
                                              P_SENDER_ADDRESS
                                              P_SENDER_ADDRES_TYPE
                                     CHANGING P_ERROR
                                              P_RECIEVER.
DATA: LD_ERROR    TYPE SY-SUBRC,
       ld_reciever TYPE sy-subrc,...
         LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
         LD_EMAIL LIKE SOMLRECI1-RECEIVER,
         LD_FORMAT TYPE SO_OBJ_TP ,
         LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
         LD_ATTFILENAME TYPE SO_OBJ_DES ,
         LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
         LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
         LD_RECEIVER LIKE SY-SUBRC.
p_filename = 'INVOICE'.
LD_EMAIL   = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT              = P_FORMAT.
LD_ATTDESCRIPTION      = P_ATTDESCRIPTION.
LD_ATTFILENAME         = P_FILENAME.
LD_SENDER_ADDRESS      = P_SENDER_ADDRESS.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE PIT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
     ( W_CNT - 1 ) * 255 + STRLEN( PIT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME   = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = PIT_ATTACH[].
Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM   = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE   = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME   = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE   = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
LOOP AT T_TO_EMAIL WHERE EMAIL <> SPACE.
    CLEAR T_RECEIVERS.
    T_RECEIVERS-RECEIVER = T_TO_EMAIL-EMAIL.
    T_RECEIVERS-REC_TYPE = 'U'.
    T_RECEIVERS-COM_TYPE = 'INT'.
    T_RECEIVERS-NOTIF_DEL = 'X'.
    T_RECEIVERS-NOTIF_NDEL = 'X'.
    APPEND T_RECEIVERS.
    CLEAR T_RECEIVERS.
ENDLOOP.
copy email address
CLEAR T_RECEIVERS.
IF NOT T_RECEIVERS[] IS INITIAL.
    LOOP AT T_CC_EMAIL.
      T_RECEIVERS-RECEIVER = T_CC_EMAIL-EMAIL.
      T_RECEIVERS-REC_TYPE = 'U'.
      T_RECEIVERS-COM_TYPE = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
      T_RECEIVERS-COPY       = 'X'.
      APPEND T_RECEIVERS.
      CLEAR T_RECEIVERS.
    ENDLOOP.
ENDIF.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
    EXPORTING
      DOCUMENT_DATA              = W_DOC_DATA
      PUT_IN_OUTBOX              = 'X'
      SENDER_ADDRESS             = LD_SENDER_ADDRESS
      SENDER_ADDRESS_TYPE        = LD_SENDER_ADDRESS_TYPE
      COMMIT_WORK                = 'X'
    IMPORTING
      SENT_TO_ALL                = W_SENT_ALL
    TABLES
      PACKING_LIST               = T_PACKING_LIST
      CONTENTS_BIN               = T_ATTACHMENT
      CONTENTS_TXT               = IT_MESSAGE
      RECEIVERS                  = T_RECEIVERS
    EXCEPTIONS
      TOO_MANY_RECEIVERS         = 1
      DOCUMENT_NOT_SENT          = 2
      DOCUMENT_TYPE_NOT_EXIST    = 3
      OPERATION_NO_AUTHORIZATION = 4
      PARAMETER_ERROR            = 5
      X_ERROR                    = 6
      ENQUEUE_ERROR              = 7
      OTHERS                     = 8.
Populate zerror return code
LD_ERROR = SY-SUBRC.
Populate zreceiver return code
LOOP AT t_receivers.
   ld_receiver = t_receivers-retrn_code.
ENDLOOP.
IF SY-SUBRC = 0.
    FORMAT COLOR COL_NORMAL ON.
    LOOP AT T_LOG.
      WRITE :/03 T_LOG-VBELN,
              19 SY-VLINE,
              20 T_LOG-KUNNR,
              34 SY-VLINE,
              35 T_LOG-NAME1,
              76 SY-VLINE,
              77 T_LOG-EMAIL,
              110 SY-VLINE,
              111 'Email Sent Successfuly',
              180 SY-VLINE.
    ENDLOOP . "t_log
    FORMAT COLOR COL_NORMAL OFF.
    CLEAR T_LOG.
    REFRESH T_LOG.
ENDIF.
IF SY-SUBRC NE 0.
    CASE LD_ERROR.
      WHEN   1.
        V_ERROR = 'too_many_receivers' .
      WHEN   2.
        V_ERROR = 'Email address not found in Customer Master' .
      WHEN   3.
        V_ERROR = 'document_type_not_exist'.
      WHEN   4.
        V_ERROR = 'operation_no_authorization'.
      WHEN   5.
        V_ERROR = 'Email address not found in Customer Master'.
      WHEN   6.
        V_ERROR =   'x_error'.
      WHEN   7.
        V_ERROR =   'enqueue_error'.
      WHEN   8.
        V_ERROR =   'Error in sending email' .
    ENDCASE.
    FORMAT COLOR COL_NEGATIVE ON.
    LOOP AT T_LOG.
      WRITE :/03 T_LOG-VBELN,
         19 SY-VLINE,
         20 T_LOG-KUNNR,
         34 SY-VLINE,
         35 T_LOG-NAME1,
         76 SY-VLINE,
         77 T_LOG-EMAIL,
         110 SY-VLINE,
         111 V_ERROR,
         180 SY-VLINE.
    ENDLOOP . "t_log
    FORMAT COLOR COL_NEGATIVE OFF.
    CLEAR T_LOG.
    REFRESH T_LOG.
ENDIF.
ENDFORM.                    " SEND_FILE_AS_EMAIL_ATTACHMENT
*&      Form INITIATE_MAIL_EXECUTE_PROGRAM
      text
--> p1        text
<-- p2        text
FORM INITIATE_MAIL_EXECUTE_PROGRAM .
WAIT UP TO 2 SECONDS.
SUBMIT RSCONN01 WITH MODE = 'INT'
                WITH OUTPUT = 'X'
                AND RETURN.
ENDFORM.                    " INITIATE_MAIL_EXECUTE_PROGRAM
Reward Point If it usefull....
Cheers,
Sagun Desai....

PSE7 - Error when open the quick edit tab

Hi,
I have installed PSE7 on my new pc (xp). Since the installation I get an error message when I open the quick editor. (see attachment)
I uninstalled PSE7 and tried to clean the registry with the CS3_clean_script. After that I installed PSE7 again, but I got the same error message.
I also got the error when I loggin with a othe admin user.
What can I do?
Conrad
(Germany)

I know you have tried it once before as well, but try to uninstall and then check if any file/folder/registry is remaining even after the uninstallation by cross verifying from the below link:
http://kb2.adobe.com/cps/405/kb405847.html
Now again try to install again. If the issue again appears then may be we can assume that the issue is not specific to installation but to something else.
Regards,
Ankush

Adobe flash error when opening a file is closed and leaves open the file

Similar Messages

Maybe you are looking for