Adobe flash player volume settings
Every time i start a new browser up and then whatch a video the volume of the adobe flash player is automaticly set to volume 1, this is too quiet to listen to properly so i have to go into the volume menu and change it every time which can get annoing.
Is there any way in which i can change the startup volume setting
Thanks Karl
Hi Karl,
I assume you are using Firefox? If so, please see this bug report:
https://bugbase.adobe.com/index.cfm?event=bug&id=3210127
Thanks,
Chris
Similar Messages
-
Adobe Flash Player/local settings
Have problems playing games with the new d/l of adobe flash player, it gives me needs to put info on my local storage options are deny or allow but it freezes my games up wont let you allow or deny it..have tried using the f8 key and it also freezes so i cannot play certain games..how do i get rid of the problem?
Did you specify an amount of local storage to be used by Falsh Player? (Right-click on Flash object | Settings | tab Local Storage.)
-
Adobe flash player proxy settings?
hi there,
in addition to my other post regarding proxy solution for flash content...
does Adobe flash player have setting to force to use proxy? or any network configuration?
thanks in advanceHere is an interesting discussion regarding Flash Player and proxy settings http://www.techsupportforum.com/alternative-computing/mozilla-firefox-browsers/397364-diff erent-proxy-settings-flash-player.html
-
This problem is rustling my jimmies hardcore
Everytime I restart Firefox or Internet Explorer "Adobe Flash Player 11.3" always resets back to 100% in the Window's volume mixer while everything else stays put.
My Skype volume never resets after a restart, my Firefox volume never resets after a restart, my WMP/VLC players never reset after a restart. Why does this
How could something so obvious get past QA, quite frankly I think it's embarrassing for a company as big as Adobe.When you have a minute, please vote for the following bug: https://bugbase.adobe.com/index.cfm?event=bug&id=3210127
As for working around this issue, please see the following FAQ. In particular, you can either disable Protected Mode or revert back to a previous version of Flash Player.
How do I troubleshoot Flash Player's protected mode for Firefox? -
How access Adobe Flash Player Settings on Playbook Browser
How do you gain access to the adobe Flash player settings? For example to select Display or Privacy or Microphone or Camera.
On desktop it's done with a right click on the flash object on the page and select Settings...
How do you bring up these settings on the Playbook?Are you talking about Flash in a browser?
o2 interactive | FaceBook | Blog | Twitter -
Adobe Flash Player Settings window keeps popping up
Flash Player version 11.7.700.225
Mac OS 10.6.8 (64 bit)
Browser Safari
When playing news clips I keep getting the Adobe Flash Player Settings Window. And the Allow and Deny buttons don’t work so I can’t get rid of the window without closing the video.
What can I do to correct this?
Thanks for your help.Hi,
Sorry to hear that.
The Settings window might pop-up due to insufficient memory allocation, camera/mic adjustments etc.
Can you please look at this page: http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager.html ?
Changing the setting might help you.
With regards,
Prabhu -
Adobe flash player not remembering settings
i just bought a brand new hp laptop and im having some difficiculty with adobe flash player 10. i am running it on vista x64 and in firefox but whenever i run something like gmail's video chat, it asks me everytime to 'allow' it. i have tried going to the settings and allowing the gmail to 'allow' access to my webcam and voice recorder and click on 'always' but it never actually saves the changes. the same is true when i come to the adobe site and try to change the global settings. nothing i change in any of the settings will save. its pretty frustrating i tried looking into it some and it sounded like the problem may be that im running it at x64. im not sure if this is the case tho. im clueless, hence this thread. also, i'm not sure if there is any correlation, but i can't get the music player on myspace profiles to show up, not a major concern to me tho.
Check out this article and see whether anything there helps: [[Flash 11.3 doesn't load video in Firefox]].
Also, you probably want to look under Tools > Add-ons > Plugins for Shockwave Flash. -
Using a Windows 2012 RDS Environment, we have users connecting to a CPD website, and as part of the CPD they need to run a systems checker. When they run the systems checker they get the following error message: "Adobe Flash FAIL: Adobe Flash Player local storage settings incorrect. Module 'Resume' feature may not work on this computer". All users are connecting to this environment with Windows CE Clients,I have checked the setting on Adobe Flash and they seem correct but as each user has its own profile on the RDS session, is there something that I should be setting for each user. I have added the website to the trusted sites and it has made no difference. Any ideas
It sounds like what's happening is that Flash Player can't write or read from the local shared objects in the user's redirected home directory because we disallow traversing junctions in the broker process. This behavior was disabled to address a vulnerability identified in some of John Forshaw's research into the IE broker last year.
You can enable this behavior by adding the following setting to mms.cfg:
EnableInsecureJunctionBehavior=1
That said, you can probably gather from the name of the flag that we don't really recommend this approach, and disable this attack surface by default. There's some risk that a network attacker could craft content that abuses fundamental issues with how Windows handles Junctions to write to arbitrary locations.
Unfortunately, there's not a simple or easy workaround that I'm aware of (but it's been ages since I've administered a Windows domain) for this kind of NAS/SAN-backed terminal server environment where Flash is not able to access \Users\<user>\AppData\Roaming\Macromedia\Flash Player\ without traversing a junction. -
Adobe Flash Player Settings Problem
Hi I'm having problems selecting things inside of "Adobe
Flash Player Settings."
When ever i right click on a flash instance, say a youtube
video and select settings, I get no response from box that appears
no matter where I click. Even when I click close I get no response.
I have a Mac Book Pro running os 10.4.11
I have the newest version of Flash Player 10
I have Java 5
I have tried this in both Firefox and Safari
When I created a new account on my computer and opened
youtube i was able to change settings inside of panel.
Any help would be wonderful I have googled and searched these
forums a million times looking for help and have found nothing
helpfulTWEAK DISCOVERED for Flash Player 10 to save local settings!!
I was digging around in:
~/Library/Preferences/Macromedia/Flash Player/www.macromedia.com/bin/fpupdatepl/
and I discovered:
Adobe Flash Player.pkg
If you Right Click (or Control + Click) the Package and then select 'Show Package Contents' this will open a new window.
Then navigate to:
Contents/Resources/
There you will find a file:
Adobe Flash Player.info
Open this file with text edit (or your app of choice)
On about the fourth line from the bottom look for:
OverwritePermissions NO
Change this to:
OverwritePermissions YES
A NOTE OF CAUTION
I have not fully tested this change, but did find that after I modified the local settings for the Flash Player, then restarted Safari that the settings remained the same.
Good Luck!
~ry -
Volume problems with Adobe Flash Player 11.5 r502
Hello,
Whenever I used to watch Youtube or other video through Firefox, my volume would remain at whatever volume I had set for Firefox in my Volume Mixer. The last few iterations of Firefix (currently 17.0.1), however, have seen a new item, "Adobe Flash Player 11.5 r502" appear in my Volume Mixer whenever I go to Youtube or any other audio/visual element within Firefox, and it always starts at maximum volume, and even when I manually open my Volume Mixer to turn it down, sometimes opening a new tab/window causes the volume to "reset" back to maximum again.
This has gone from being a nuissance into a real annoyance, and I am seeking help trying to figure out what's going on and how I can stop it. Thanks very much in advance for any help that can be provided.I'm sorry your running into this. This is a known issue, and something that came about with our 11.3 protected mode changes. I'd like to recommend you take a minute and add a comment/vote for the following bug report:
https://bugbase.adobe.com/index.cfm?event=bug&id=3210127 -
Update security settings for adobe flash player
I have windows 7, 64bit, adobe flash player 11.
Can't play You Tube videos...message say need to update flash player.
Went to adobe site....tried to download latest version 11.8, and message says I need to update security settings to allow.
I'm a beginner...where and how to update these settings.Download the Adobe Flash Player installer directly by right clicking one of the following links.
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
Save the installer - DO NOT run it yet.
Reboot your system.
BEFORE you open anything else, locate and run the installer you downloaded. -
Volume problems with Adobe Flash Player 11.7 r700
Hello,
Whenever I used to watch Youtube or other video through Firefox, my volume would remain at whatever volume I had set for Firefox in my Volume Mixer. The last few iterations of Firefix (currently 20.0.1), however, have seen a new item, "Adobe Flash Player 11.7 r700" appear in my Volume Mixer whenever I go to Youtube or any other audio/visual element within Firefox, and it always starts at maximum volume, and even when I manually open my Volume Mixer to turn it down, sometimes opening a new tab/window causes the volume to "reset" back to maximum again.
This has gone from being a nuissance into a real annoyance, and I am seeking help trying to figure out what's going on and how I can stop it. Thanks very much in advance for any help that can be provided.
PS - this problem also happened with 11.5 r502 and 11.6 r602, but the thread I was directed to report the original problem has apparently been removed from Adobe's site...Nothing has been removed...
http://forums.adobe.com/thread/1113167
http://forums.adobe.com/thread/1198668 -
Volume problems with Adobe Flash Player 11.6 r602
Hello,
Whenever I used to watch Youtube or other video through Firefox, my volume would remain at whatever volume I had set for Firefox in my Volume Mixer. The last few iterations of Firefix (currently 17.0.1), however, have seen a new item, "Adobe Flash Player 11.6 r602" appear in my Volume Mixer whenever I go to Youtube or any other audio/visual element within Firefox, and it always starts at maximum volume, and even when I manually open my Volume Mixer to turn it down, sometimes opening a new tab/window causes the volume to "reset" back to maximum again.
This has gone from being a nuissance into a real annoyance, and I am seeking help trying to figure out what's going on and how I can stop it. Thanks very much in advance for any help that can be provided.
Note - this problem also happened with 11.5 r502, but the thread I was directed to, to report it, has apparently been removed from Adobe's site.Nothing has been removed...
http://forums.adobe.com/thread/1113167
http://forums.adobe.com/thread/1198668 -
Hey guys,
I have a page with some html content and my Flex app in the bottom left hand corner. At one point, the Adobe Flash Player Settings popup appears, but I can only just see the top of it, the rest is off screen towards the bottom. I set the height of the application in the opening application tag, to 240. The whole app is visible in the HTML page, but for some reason the background colour of the Flex app goes past its height and width properties. This is probably causing the Flash Player Settings popup problems right?
Does anyone know how I can fix this so that the user can interact with the popup? Thanks for reading.Thanks Mike, Problem continues if I uninstall Adobe Flash
Player....scanning computer now for malware.....amazing that the malware
uses Adobe Flash Player even thought my control panel says the player does
not exist. Adds are not too bad but I do not like something going on out
my control....what else is up??? That kind thing. Will let you know when
problem is solved, best, Allen Bealle -
Adobe Flash Player Settings Local Storage popup from Mafia Wars on Facebook.
I play Mafia Wars on Facebook. I use Mac OS 10.6.5, Flash Player 10.1, and Firefox 3.6.8. Some time ago I received a popup from Zynga entitled Adobe Flash Player Settings, Local Storage asking permission to store info on my harddrive and giving me the option to allow or deny the request. However the popup is stuck; that popup will not go away.
I have contacted Zynga, followed their instructions, and have uninstalled and reinstalled Flash Player. all with no success. When I play this game on other computers, including PCs, that popup is not there which leads me to the conclusion that the file is on my Mac hard drive somewhere and has nothing to do with the game itself. Please tell me how to find this file so that I may delete it. It spoils my enjoyment of the game because it limits what I can do in the game.
Thanks loads.
Lawanda (Randall)Hi, I would go to the Global Settings site here:
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.htm l
I would click on the website that gave you the popup and delete that website. Perhaps this will clear it since it is stuck.
When you visit that website again, it will problably ask to store info. Be sure to read about the Website Storage Settings Panel and how it works with the Global Storage Settings Panel.
Thanks,
eidnolb
P.S. If Flash Player is working, there is no need to Uninstall and Install it again. The games and Facebook will try to always tell you something is wrong with Flash Player. Clearly it was working until their pop up stuck, right?
Maybe you are looking for
-
Getting time out error when running the assigned verification in DRM 9.3.2.
Hi, I have installed DRM 9.3.2.0.0 in my system (windows 7), when i am trying to run assigned verifications i am getting the time out error within a minute. As suggested by oracle,I have added DWORD with value 480000 under Master Data Management in R
-
Password protecting digitally signed documents in Adobe Acrobat X Pro
I am looking for the combination of steps to get my digitally signed documents to be password protected for secure distribution. My documents contain new "user password" information and a number of "areas" which require digital signatures to be added
-
I have several different bookmark folders, but when I want to save into one of them only three are shown ... always the same three, and no apparent reason for only these to be chosen. I cannot get the complete list by using the right-hand down arrow,
-
Find equipment number from the asset number
hi, where i can find ( I NEED TABLE name ) Equipment number, its in transaction as03 ->allocations -> right to field Equipment number i press f1 and found it's a structure ra02s where i can find it (which table)? i know equi is the master data table
-
Hi all, What are infotypes ? I am new to Infotypes . Please Explain in detail. Thanks in advance. Regards. Raj