Adobe Flash Professional .FLA Error Message

Why am I getting an error message when I open up a specific .FLA file?

Alright.
I have video foootage of me animating in the file if that would help.
Message was edited by: AnonymousAnimator

Similar Messages

Adobe Flash 10c.ocx error message?

Well, my sister and I are REALLY getting angry at whatEVER this flash thing is. I run my business on the road -am gone a LOT. Tonight when I got home, I had a very important eMail letter to send. Three other windows were open -NOTHING PERTAINING TO ADOBE!!! All of a sudden, it wiped ALL of them out, shut them down and left me with this little number above, "Adobe Flash 10c.ocx" error message, to which crap vista windows informed me, "Internet Explorer has encourntered a problem with an add-on and needs to close." No warning ... just the whole letter and ALL the other pages, GONE!
If I want to do something with Adobe, I'll do it, otherwise I expect it to sit quietly in the background and keep quiet! I have enough problems with this vista "system" -WORST ever invented. Just what vista needed, something else so it can cause more headaches!
I found this forum, and I HOPE this will be fixed VERY shortly. Thanks for letting me say.
Thank God I have almost total recall when such a thing happens, but I really do not appreciate it happening in the middle of a message so important!

1. Download & use the flash Uninstaller from here: it
http://kb.adobe.com/selfservice/viewContent.do?ext...
2. Reboot to clear out any left over ocx files.
3. Rescan using Secunia PSI - if there are any insecure Flash elements left what is the path to them? U should not proceed to stage 4 until all U clear any problems found.(The overview page may look a little odd because it uses Flash for the pictorials) you can download it from www.secunia.com it's a easy tool to use just follow the commands
4. Reinstall the latest Internet Explorer Flash Player from here: ( make sure you copy the link below and open internet explorer and paste it into the address bar and press enter then download the file and it should install fine.)
http://www.filehippo.com/download_flashplayer_ie/
3A.If U are also using Firefox, Opera and other Gecko-based browsers U need this link as well: ( If you are using this browser just follow the same commands as above just copy the link below and paste it into the address bar and press enter then download the file and it shold install fine)
http://www.filehippo.com/download_flashplayer_fire...
5. Go to add/remove & double check Adobe have not installed the useless Adobe Download Manager - if U see an entry remove it.
Hope it helps for you i had the same problems took me days to work out what was wrong, let me know if it fix it. Melissa

Adobe Flash Player 10 Error Message

About four days ago, I started getting this error message in a dialog box. It appears even with nothing open that would even require a need for Flash. I removed Adobe Flash Player 10 and rebooted, then added it back. The problem continues however.
Win-XP/SP3 fully patched and Malware free.
"A script in this movie is causing Adobe Flash Player 10 to run slowly. If it continues to run, your computer may become unresponsive. Do you want to abort the script? Yes / No.
Checking either option only gets rid of the pop-up for a few minutes.
Regards:
BruceIB

I have just recently resolved my Flash Player issue.
My suggestion to all who have troubles with Slowing down players or error messages (like I was getting) is very similar to what has been suggested by Meln long ago.For windows machines- I don't know mac fix. but this might work.
1. remove/uninstall flash player from your system. ALL BROWSERS
2. reboot your system
3. goto the adobe site for flash player and have it check that you in fact DO NOT have flash player installed.
4. download the latest version of flash player and let it IMMEDIATELY do the install.
5. reboot
6. check how flash player works. If it is buggy and slow or kicking up errrors/messages go back to step 1. repeat this cycle as many times as necessary.
some notes:
Be careful when doing the install -DO NOT DOWNLOAD THE FLASH DEBUGGING VERSION- it will kick up errors galore.
Make certain you do noting else during the install and remove processes. You are problem solving -not being productive, so just wait it out patiently.
I know some will say, why would i remove, download and install multiple times - once should either work or not work.
OH how I wish this were true for funky software issues. There is some glitchy thing going on and where exactly it happens is anyones guess, or it would have been fixed. Without rhyme or reason one time though it will just work. when it does do a system restore point and put GOOD FLASH PLAYER as the note. after you do this fix you will know why you want a quick way back to this point.- you don't want to do it again.
i know this sounds stupid but after trying for months to "fix" my issue this is what worked on multiple PCs i had that had the issue(s) slowing down and messages.

I cannot download ADOBE Flash. The error message is FAILED from Firefox. The other error message is "CANNOT CONFIGURE APPLICATION." Any suggestions?

ADOBE 12.exe downloaded. FLASH will download but won't install. The error message is "CANNOT CONFIGURE
APPLICATION."

You can try to run the Flash installer as Administrator.
Latest Flash player versions here:
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html

I am facing issue when opening flash files in Flash CC. (Error : - .fla was created with a later version of Adobe Flash Professional CC and might contain new features not supported in this version of Flash professional.)

I am facing issue when opening flash files in Flash CC. (Error : - .fla was created with a later version of Adobe Flash Professional CC and might contain new features not supported in this version of Flash professional.)

fyfesa1970 wrote:
Ask a simple question and get a simple answer...see below...hilarious:
All representatives are actively assisting other customers. Your estimated wait time is 0 minute(s) and 1 second(s) or longer. Thank you for your patience.
We all can learn from this. Whenever you get stuck in a customer-service situation that goes nowhere, as soon as you become aware of the futility, get the name and employee ID of the person, then say, "I don't mean to be rude, I think we're both wasting our time. Perhaps you weren't trained for this issue, or perhaps your system isn't displaying the correct information. It doesn't matter, because I'm not getting proper customer support this way. Please ESCALATE this to your highest-level manager IMMEDIATELY. If that person isn't availabe, ESCALATE me to that person's highest-level manager. If you haven't been given the proper training, you can use this to inform your manager that you need the training. Thanks for trying to help. I appreciate it. I have copied and saved this chat session. NOW PLEASE ESCALATE THIS CASE AS I HAVE REQUESTED ABOVE. I'm waiting now... "
The point is that you're a customer, and the company needs customers, so the individual who's failing to deliver good service needs to be identified so they can be properly trained, and so that problems in the system can also be identified, but more important is that you get the service you're entitled to.
If you search the forum for similar questions, you'll see the kind of information that the volunteer users like yourself on the forum need to know about your system and files involved, so they can help you better.
Good luck.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

To whom this may concern, I'm having troubles with uploading Flash Files Online throught Adobe Flash Professional and I would to correct the Error Messages I've received as an indication that I need to correct them in order to test a Flash and Shockwave F

To whom this may concern, I'm having troubles with uploading Flash Files Online throught Adobe Flash Professional and I would to correct the Error Messages I've received as an indication that I need to correct them in order to test a Flash and Shockwave Files I have stored into the Software of Flash!. Could you please help me get this matter resolved? Gerard Hargrove.

what exactly are you trying to do and attach a screenshot of the error message, if it's in english.

When i'm starting adobe flash professional there is an error 5 what should i do?

When i'm starting adobe flash professional there is an error 5 what should i do?

Can you check the solution mentioned in this thread to see if it helps?
Configuration error 5 (http://forums.adobe.com/thread/628476)
Thanks,
Preran

How do I save adobe flash professional cc file (fla.) as adobe flash professional cs5 file (fla.)?

how do I save adobe flash professional cc file (fla.) as adobe flash professional cs5 file (fla.)?
hi, I'm a college boy.
at college, i need to summit adobe flash professional files (fla) for asignment.
I use adobe flash professional cc at home, but at school it use cs5.
so I have to save fla. file to cs5 version.
how do I save adobe flash professional cc file (fla.) to adobe flash professional cs5 file (fla.)?
in cs6 version, you can see whether to save as cs5 or cs6 but I can't see those thing in cc !!
please help!

there's only
flash document (fla)
flash uncompressed document (xfl)
when you click 'save as'.
abobe says you can load cc files on previous version, but I don't know how to save as previous version.

Problems with Adobe Flash Professional CC (CS6 too) to save animated .gif file or perfect .swf file

Hello,
I have a problem with Adobe Flash Professional CC and CS6 to save animated .gif file. Here is very simple work with logo. But I can't save a perfect file swf or gif and it's so bad news for me. Logo .swf file save with bugs. Bugs just see then file insert in freeshop page. Here is just example test page, it let you see logo bugs - http://tagraseshop.graphicsrim.eu . Here is real page, but it's not my, it's freeshop with old logo and I have corect it - http://www.tagras.lt
Animated .gif file absoluted not saved in Flash CC. Just gif picture. And why? My os Windows 8.1 . Indeed I try to save on Adobe Flash Professional CS6. It's not save too...
Gif "animated" - https://mega.co.nz/#!D8pEVaRR!Gjg-nI4T-0vROV9xCa1XfXz4br1X9lpQfUR0nQNT LK4
Swf with bugs - https://mega.co.nz/#!jo5lSRyS!1x6GjWqYsf7n4KknUs6eF8EqZXEv9e8RsSpGd8h5 jGQ
Fla - flash document - https://mega.co.nz/#!C94nCDSS!7yKF9FIBvYtVC9r8kYiJ0l0xzUm_R2HwgoXks6iM zUA
Perfect animation speed is here - http://e-shoptagras.graphicsrim.eu
Who can help to me?
Any ideas?
Thanks for your help in advance!

Thanks, but I use publish/export settings with GPU hardware acceleration and flash version 11.2 (and 11.8) but nothing happening.
And why gif file is not all transparenty then I insert on lightblue background? It can't export good quality? Also I use Photoshop, After Effects, Adobe Edge Animate. And nothing happening. Egde animate file .oam is not good for old website navigation. It can't be inserted in freeshop site from navigation... I use logo file .oam just for example here - http://e-shoptagras.graphicsrim.eu
In reality I want swf file, but we don't find why logo flickering? here http://tagraseshop.graphicsrim.eu
All file's are transparenty - https://mega.co.nz/#!f8B2CD5R!J8uCJt9Sdq4Suz4HLhTHz8bzJcSWXMBIKcKZgkD3z8c
I need help! Please!

(How can we) Import Flash Professional .FLA file format?

How can we import a Flash Professional .fla file format into Flash Catalyst? It would appear that we can't...at least not yet! I have added this as a feature request within the adobe labs site for Catalyst. Someone at Adobe suggested that I also explore the forums, so here we are. If you would also like to have this feature added, please let Adobe know by promoting the
idea.
Our use case is this: we have a large Flash file with a library of over one thousand skins and assets that were built in Flash with Adobe's Flex Skins Templates. These stateful, graphical skins were used within a custom theme by several Flex 3 projects.
Now that we are looking to migrate to FlashBuilder 4, and start to use Spark components, we are trying to find a workflow that allows us to use Adobe tools and to reuse our existing vector artwork. Since we have such a large number of assets, we are exploring various approaches, including the use of JSFL. So far we haven't found a good way to migrate from Flash-built skins for Flex 3 to Catalyst-built skins for FlashBuilder 4.

Hi Ajay,
See attached V 7.0 example...
Hope it helps,
Nick
Attachments:
Read_txt_File.vi ‏20 KB

Adobe Flash IDE: Migration/Compatibility issues between Adobe Flash Professional CS3 and CS5

Hi,
Adobe Flash IDE: Adobe Flash CS3 Professional and Adobe Flash Professional CS5
I am facing some migration/compatibility issues between Adobe Flash CS3 Professional and Adobe Flash Professional CS5:
I am working on a project that has been completely developed in CS3 earlier. When I am using CS5 (Flash Player 9 / Flash Player 10) to compile the FLA files, it is creating some new issues like some customized radio buttons are getting disappeared while viewing the SWF on a web page etc.
So, I would like to know:
1) Is there any migration/compatibility issue between Adobe Flash CS3 Professional and Adobe Flash Professional CS5?
2) If yes: Is there any patch available from Adobe for it?
3) If no: What could be the causes and the best possible solutions for it?
Any help and support would be highly appreciated. Many thanks in advance!
Thanks & Regards
Amit

Apparently some people have issues, but I don't think it is across the board. Here's a link to another recent posting that may or may not prove helpful to you...
http://forums.adobe.com/thread/776615?tstart=60

I am not able to download Flash Player--- the error message is Internet Explorer should be closed

I am unable to download Flash Player ===== the error message says that Internet Explorer should be closed---- how would I get to Adobe.com if Internet Explorer is not open?

You download the installer (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe) and save it to disk, then close all Internet Explorer windows and run the downloaded installer.

How to add norwegian language to my ipa-file in Adobe Flash Professional and Settings for AIR

Hi,
How to add Norwegian languages to my ipa-file in Adobe Flash Professional and Settings for AIR?
The Norwegian users get my apps in english instead of Norweigan. Desperate for help!
Regards Ylva

Sorry but you will not get help here for that problem. This forum is about AIR Help, an online help format produced using AIR, it is not about AIR itself.
I'll see if I can move it.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ?

I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ? Right now I have a 10.5.8 is there a way to upgrade or something?

Buy the Snow Leopard retail installer (http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA).
That will take you to 10.6.3.
If required you can then use the combo updater to get to the latest version, 10.6.8 (http://support.apple.com/kb/DL1399)
SL system reqmts;

Can't open PDF's on my Mac coming in on MS Outlook 2010. Reinstalled Adobe software 4 x and still get "Adobe PDF Preview Handler" error message.

Can't open PDF's on my Mac coming in on MS Outlook 2010. Reinstalled Adobe software 4 x and still get "Adobe PDF Preview Handler" error message.

No. Reader will not damage files. It is only meant to read pdf files. PDF files are frequently damaged when sent as email due to encoding issues.

Adobe Flash Professional .FLA Error Message

Similar Messages

Maybe you are looking for