Adobe_flashplayer_e2c7b_Setup.dmg Is this malware? If so, how to detect and remove it?

adobe_flashplayer_e2c7b_Setup.dmg 
Is this malware? If so, what is the easiest way to detect and remove it?

There is no need to download anything to solve this problem.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates (OS X 10.10 or later)
or
          Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

Similar Messages

  • How can detect and remove scanned white pages in an OCRd pdf file?

    How can detect and remove scanned white pages in an OCRd pdf file?

    Acrobat does not support an automated way of doing this directly. You can
    remove completely blank pages (pages that don't have any "marking
    objects"), but a scanned page does contain an image, so Acrobat won't help
    you here. There are a number of 3rd party applications and plug-ins
    available. Try a Google search for
    remove blank pages from scanned
    pdf<http://www.google.com/search?client=safari&rls=en&q=removeblankpagesfromscanned+pdf&ie=UTF-8&oe=UTF-8>
    This will bring up a few different solutions.
    Another way is to use JavaScript to find text. You say that these documents
    are OCRed, so if you have a blank page, it should not have any text on it.
    With some JavaScript, you can identify pages that don't contain text. This
    may however fail if you have a page that contains just e.g. a photographic
    image. There won't be any text, but the page is certainly not blank.
    Karl Heinz Kremer
    [signature removed by host]

  • Iphone hacked?  Please help on how to detect and remove  possible malicious software/apps

    Hi,
    I have an iphone 4s.  I've installed iOS 7.   Some one has been harrasing me and seems to have access to my info on the phone.  I use icloud and the phone apps for calendar and they seem to know detail that are only in my calendar on my phone.
    I have changed the password for icloud from a safe computer many times and have re-installed the OS on the phone  and have gone through all the apps and removed any that I don't absolutely trust.
    Is there any way to see if there is an app on the phone that enables hacking/sharing of the info. on that phone? 
    Any advice on what to do?  It's not that information about my calendar is all that important but it just creepy that someone would be so evil to do so and it creeps me out-I want to make sure my phone is private and only I have access to my own information.
    Any help and advice is much appreciated.
    Thanks.

    Unless your iPhone has been jailbroken it cannot be hacked.
    The person is obtaining the information form somewhere else.
    Do they have access to your email account like Google? or Hotmail?  If your Calendar is linked to those and they have access they would be able to see your calendar.
    As was suggested above, change your Email account passwords.

  • How to streamline and remove duplicate files on my HD before I backup?

    How to streamline and remove duplicate files on my HD before I backup?
    is there a good program or freeware that can automate and isolate when I have
    duplicate files hiding in the many folders on my Drive... Yes, in a perfect world
    I should know better than having a Drive that is not perfectly organized
    I think there is something called SpringCleaning for windows
    is there something like this for Mac?
    Time machine won't let you remove something after you realized you backed
    up two of the same files... Thanks for ideas

    +is there a good program or freeware that can automate and isolate when I have
    duplicate files hiding in the many folders on my Drive.+
    You should back up your drive with Time Machine before you delete any files in case you make a mistake.
    Tidy Up! - 1.3.2
    http://www.versiontracker.com/dyn/moreinfo/macosx/17908
    +Time machine won't let you remove something after you realized you backed
    up two of the same files.+
    Click on the Time Machine browser icon on the dock. Locate the duplicate file you wish to delete and highlight it. Click on the button with the gear on and choose Delete "all backups of".

  • HT2905 No Display Duplicates under File. How to find and remove duplicate items in your iTunes library

    I now have iTunes ver 11.0.4.4 under Windows 7. I lost all iTunes stuff when updating to Windows 7. I have loaded thousands amd thousands of music files from backup disks, but there are many duplicates. I am attemping to re-establish my old library. I used to be able to remove duplicates quickly with the old iTunes. The new iTunes doesn't seem to offer the same service. Is there any way to remove duplicates quickly, or must I do it one by one?

    When deduping use Shift > View > Show Exact Duplicate Items as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin. Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background and please take note of the warning to backup your library before deduping.
    (If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
    See also HT2905: How to find and remove duplicate items in your iTunes library
    tt2

  • HT2905 Does anyone know how to find and remove duplicate items in the new itunes 11?

    I am having a hard time trying to figure out how to find and remove duplicate items under the New iTunes 11? Its not as user friendly as in previous versions. Does anyone know how to figure this out?

    As Jim said View > Show Duplicates
    or
    Option + View > Show Exact Duplicates

  • I cant play any videos all of a sudden after avg detected and removed a malware....

    after avg detected and removed a malware, i cant
    watch any videos... i click on a video and it tells
    me i need to downlod the latest version of flashplayer....i d
    o all that and try a video again and it tells me over and over the same thing!!!!
    i downloaded firefox and it works fine...i dont want to go around the probl
    em...i want to fix it!

    Since you mention Firefox, I assume that the original problem is with Internet Explorer?
    If so, check if that malware has the "kill-bit" set for Flash Player: http://forums.adobe.com/message/3432049#3432049
    If you find that this "kill-bit" is set in your registry, don't remove it manually (unless you are very confident editing the registry); post back here, and someone will post an easy way to remove that "kill-bit".

  • How to stop and remove an active job.

    How to stop and remove an active job.

    What sort of "job" are you referring to? A print job? If so, open the queue for the printer - it should be in your Dock, or you can access it through the Printers & Scanners system preference - and click the green Pause button to stop the entire queue, or the Pause button next to a specific print job to pause just that job. To clear a job, click the "X" button to the right of the job.
    If that's not the "job" you mean, please post back and clarify.
    Regards.

  • How to search and remove all exact words

    How to search and remove all exact words, I have tried adobe 11 Pro and I still need to know how to do this

    That works well for replace or deleting one at a time, I need to search the doc and delete all found and not change formatting
    Thank you for your help

  • How to find and remove obsolete table entries from /SAPAPO/MATKEY table in EWM System.

    Hello,
    How to find and remove obsolete table entries from below tables in EWM System.
    /SAPAPO/MATKEY
    /SAPAPO/MATMAP
    /SAPAPO/MARM
    /SAPAPO/MATLOC
    /SAPAPO/MATMOD
    /SAPAPO/MATRQ
    /SAPAPO/MATLOTSZ
    Thank you,
    Pravin

    Pravin,
    First, tell me how you determine that these entries are 'obsolete'.
    Removing master data from SCM can usually be done using transaction WUF; however, you have to ensure that it is not re-sent to the SCM system, or you are just wasting your time.
    Best Regards,
    DB49

  • How to find and remove any special character in filename?

    I have a files in various Windows Servers 2003 with a special character at his names, who are causing problem with backup software, i don´t know what character is because in explorer they are not shown and in command line they are shown only as interrogation
    mark and for this, i don´t know how i will find and remove then.
    Thanks.

    Hi,
    I agree with Dave. We can try using
    chkdsk utility to check the file system and file system metadata of a volume for logical and physical errors.
    Regarding
    chkdsk, the following article can be referred to for more information.
    Chkdsk
    http://technet.microsoft.com/en-us/library/cc730714.aspx
    Best regards,
    Frank Shen

  • How can I detect and remove keystroke logger software?

    I suspect that my soon to be ex-husband has surreptitiously installed keystroke logger software (or other "spyware") onto my MacMini.  Is there a way to detect it and remove it?   Any recommendations for protection software? Or, is it better to wipe the machine clean and reinstall software and files?  I cannot afford a new computer right now, so buying a new one is not an option.

    If you know or suspect that a hostile intruder has either had physical access to it, or has been able to log in remotely, then there are some steps you should take to make sure that the computer is safe to use.
    First, depending on the circumstances, computer tampering may be a crime, a civil wrong, or both. If there's any chance that the matter will be the subject of legal action, then you should do nothing at all without consulting a lawyer or the police. The computer would be the principal evidence in such a case, and you don't want to contaminate that evidence.
    Running any kind of "anti-virus" software is pointless. If I broke into a system and wanted to leave a back door, I could do it in a way that would be undetectable by those means—and I don't pretend to any special skill as a hacker. You have to assume that any intruder can do the same. Commercial keylogging software—which has legitimate as well as illegitimate uses—won't be recognized as malware, because it's not malware.
    The only way you can be sure that the computer is not compromised is to erase at least the startup volume and restore it to something like the status quo ante. The easiest approach is to recover the entire system from a backup that predates the attack. Obviously, that's only practical if you know when the attack took place, and it was recent, and you have such a backup. You will lose all changes to data, such as email, that were made after the time of the snapshot. Some of those changes can be restored from a later backup.
    If you don't know when the attack happened, or if it was too long ago for a complete rollback to be feasible, then you should erase and install OS X. If you don't already have at least two complete, independent backups of all data, then you must make them first. One backup is not enough to be safe.
    When you restart after the installation, you'll be prompted to go through the initial setup process for a new computer. That’s when you transfer the data from a backup in Setup Assistant.
    Select only users in the Setup Assistant dialog—not Applications, Other files and folders, or Computer & Network Settings. Don't transfer the Guest account, if it was enabled.
    Reinstall third-party software from original media or fresh downloads—not from a backup, which may be contaminated.
    Unless you were the target of an improbably sophisticated attack, this procedure will leave you with a clean system. If you have reason to think that you were the target of a sophisticated attack, then you need expert help.
    That being done, change all Internet passwords and check all financial accounts for unauthorized transactions. Do this  after the system has been secured, not before.

  • How to close and remove the current panel when loading another vi ?

    Hello,
    After login , I need to close and remove the login window , then launch another panel . How to do this?

    save "sub" to labview's default directory
    save "main" to anywhere in your PC and run it.
    Ian F
    Since LabVIEW 5.1... 7.1.1... 2009, 2010
    依恩与LabVIEW
    LVVILIB.blogspot.com
    Attachments:
    intro_self_close.vi ‏37 KB
    ianf_Test001.vi ‏33 KB

  • How safari detects and pops up 'scan credit card' link in keyboard ios 8.1?

    How safari detects the credit card number,CVV and security fields and adds 'scan credit card' link in keyboard. This s a new feature added in ios 8.1
    I want to check whether is there a way to disable it?

    An update.  Just after my first post I cleared history yet again, restarted yet again and started watching what I got when I tried to use the history to skip back a few pages.  Just now I discovered it was stuck on pages I visited at least 24 hours ago.  This is pure untested garbage, and I say that from the perspective of a 45 year IT career.
    I Miss Steve - and, yes, my iPad decided to capitalize that m all by itself...

  • How to Create and Remove CMP Entity with Toplink in same transaction??

    Hi, i have a problem to create and delete cmp intances with toplink.
    I create a entity bean and remove the same entity bean in the same transaction.
    ie. my method have this code:
    bean a = homeBean.create(pk);
    a.remove();
    bean a = homeBean.create(pk);
    this code throws a javax.ejb.DuplicateKeyException
    Toplink not remove CMP, execute the two calls of create first.
    What configure toplink to support this case ??
    Is this possible ??
    I Can't controling the transaction manualy i'm using CMP entity beans with CMT.
    tanks.
    Message was edited by:
    Carlos Lacerda

    BM,
    If you want to import the utils package into your code, then the location of the utils package has to be in your CLASSPATH. JDeveloper uses libraries to define a project's CLASSPATH.
    I'm not sure exactly what's going on here, but you might want to read the information about packages and class libraries in the online documentation. It's under:
    User Guides
    -> Working with JDeveloper
    -> Packages and Class Libraries
    Blaise

Maybe you are looking for

  • How to Restore iCal from Time Machine

    Dont now why all my events for next month and future are erase. I want to recover the last time machine back up but dont now how. Can some one bring me the step by step indications?

  • Insert into Blobs

    I need to export contents from a table with blob in our local environment and upload this data in client environment. Can I use a script to do this? How?

  • Name File in FileUpload

    Hi all, I have a FileUpload element on my view. I would like that,when I click on button Save or some another button, at the end of the operation, the file name is always shown in the inputfield. I tried to make the set of the parameter before the ex

  • Using IPad get a message cannnot connect to itunes store.  My internet connection is ok.

    Using ipad with most recent os,I am getting a message...cannot connect to itunes store.  I had just downloaded a podcast.  My internet connection os good.  When I went back later to download another podcast, that's when this message came up.  Thanks

  • Speech Analysis issue in Adobe Premiere Pro CS6

    I'm trying to use the speech analysis in Adobe Premiere Pro CS6. When Media Encoder starts up, it is only exporting an .f4v file. It will not export a .cit file. What do I need to do to correct this?