Adobe_flashplayer_e2c7b_Setup.dmg

hello everyone, i was checking my Facebook feed and i clicked on a link to a page to a video and this adobe flash installer popped up for an update, i didn't know any better and installed it but had a feeling it was something bad, so i did some googling and found a user with the same problem, now i had to go through with the install and after the install was complete mackeeper, macbooster, and zip cloud came on my dashboard, i closed all of them and deleted them, what i want to know is am i in the clear or do i have to do some cleaning? i have trend micro security doing a scan right now to make sure I'm in the clear.

Similar Messages

Adobe_flashplayer_e2c7b_Setup.dmg Is this malware? If so, how to detect and remove it?

adobe_flashplayer_e2c7b_Setup.dmg
Is this malware? If so, what is the easiest way to detect and remove it?

There is no need to download anything to solve this problem.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

How to uninstall adobe_flashplayer_e2c7b_Setup.dmg?

Hey,
So I was doing a test with my girlfriend online that was referenced from a book written by a wellknown author. Anyways, it popped up with an update from Flash, so I was skeptical at first, but then downloaded and it refreshed to a "You may have a virus" popup and a page that said the same thing... I went through this article: (Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support) and I don't believe I have anything like those on here. I am unsure of what to do next as I don't know if I do or do not have this malware on my computer. Thank you for your time.

EDIT:I re-ran as Admin just to make sure I got everything:
EtreCheck version: 2.1.8 (121)
Report generated March 22, 2015 at 6:26:41 PM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
 MacBook Pro (Retina, 13-inch, Late 2013) (Technical Specifications)
 MacBook Pro - model: MacBookPro11,1
 1 2.4 GHz Intel Core i5 CPU: 2-core
 4 GB RAM Not upgradeable
 BANK 0/DIMM0
 2 GB DDR3 1600 MHz ok
 BANK 1/DIMM0
 2 GB DDR3 1600 MHz ok
 Bluetooth: Good - Handoff/Airdrop2 supported
 Wireless: en0: 802.11 a/b/g/n/ac
 Battery Health: Normal - Cycle count 422
Video Information: ℹ️
 Intel Iris
 Color LCD spdisplays_2560x1600Retina
System Software: ℹ️
 OS X 10.10.2 (14C109) - Time since boot: 0:16:13
Disk Information: ℹ️
 APPLE SSD SD0128F disk0 : (121.33 GB)
 EFI (disk0s1) <not mounted> : 210 MB
 Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
 Macintosh HD (disk1) / [Startup]: 120.11 GB (13.33 GB free) (Low!)
 Core Storage: disk0s2 120.47 GB Online
USB Information: ℹ️
 Apple Internal Memory Card Reader
 Apple Inc. BRCM20702 Hub
 Apple Inc. Bluetooth USB Host Controller
 Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
 Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
 Mac App Store and identified developers
Kernel Extensions: ℹ️
 /Library/Application Support/Avast/components/fileshield/unsigned
 [loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.10) [Click for support]
 /Library/Application Support/Avast/components/proxy/unsigned
 [loaded] com.avast.PacketForwarder (2.0 - SDK 10.10) [Click for support]
 /Library/Application Support/VirtualBox
 [loaded] org.virtualbox.kext.VBoxDrv (4.3.20) [Click for support]
 [loaded] org.virtualbox.kext.VBoxNetAdp (4.3.20) [Click for support]
 [loaded] org.virtualbox.kext.VBoxNetFlt (4.3.20) [Click for support]
 [loaded] org.virtualbox.kext.VBoxUSB (4.3.20) [Click for support]
 /Library/Extensions
 [loaded] com.logmein.hamachi (1.0.0 - SDK 10.9) [Click for support]
 /System/Library/Extensions
 [not loaded] com.xxxchurch.x3nke (1.0.3 - SDK 10.9) [Click for support]
Launch Agents: ℹ️
 [not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
 [running] com.adobe.AdobeCreativeCloud.plist [Click for support]
 [running] com.avast.update-agent.plist [Click for support]
 [loaded] com.avast.userinit.plist [Click for support]
 [running] com.logmein.hamachimb.plist [Click for support]
 [loaded] com.oracle.java.Java-Updater.plist [Click for support]
 [running] com.teamviewer.teamviewer.plist [Click for support]
 [running] com.teamviewer.teamviewer_desktop.plist [Click for support]
 [loaded] org.macosforge.xquartz.startx.plist [Click for support]
 [running] Safe.Connect.client.plist [Click for support]
Launch Daemons: ℹ️
 [loaded] com.avast.init.plist [Click for support]
 [loaded] com.avast.uninstall.plist [Click for support]
 [loaded] com.avast.update.plist [Click for support]
 [running] com.logmein.hamachi.plist [Click for support]
 [running] com.mice.360Daemon.plist [Click for support]
 [loaded] com.microsoft.office.licensing.helper.plist [Click for support]
 [loaded] com.oracle.java.Helper-Tool.plist [Click for support]
 [loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
 [loaded] com.teamviewer.Helper.plist [Click for support]
 [running] com.teamviewer.teamviewer_service.plist [Click for support]
 [failed] com.x3.x3daemon.plist [Click for support] [Click for details]
 [loaded] org.macosforge.xquartz.privileged_startx.plist [Click for support]
 [not loaded] org.virtualbox.startup.plist [Click for support]
 [running] Safe.Connect.plist [Click for support]
User Login Items: ℹ️
 None
Internet Plug-ins: ℹ️
 AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
 QuickTime Plugin: Version: 7.7.3
 Default Browser: Version: 600 - SDK 10.10
 SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 [Click for support]
 Unity Web Player: Version: UnityPlayer version 5.0.0f4 - SDK 10.6 [Click for support]
 Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
 DirectorShockwave: Version: 12.1.1r151 - SDK 10.6 [Click for support]
 JavaAppletPlugin: Version: Java 8 Update 31 Check version
3rd Party Preference Panes: ℹ️
 Java [Click for support]
 X3 Watch [Click for support]
Time Machine: ℹ️
 Auto backup: YES
 Volumes being backed up:
 Macintosh HD: Disk size: 120.11 GB Disk used: 106.78 GB
 Destinations:
 My Passport for Mac [Local]
 Total size: 999.18 GB
 Total number of backups: 7
 Oldest backup: 2014-11-21 20:06:30 +0000
 Last backup: 2014-12-16 21:10:00 +0000
 Size of backup disk: Excellent
 Backup size 999.18 GB > (Disk size 120.11 GB X 3)
Top Processes by CPU: ℹ️
 99% x3d
 80% com.avast.daemon
 14% kextd
 3% WindowServer
 0% ocspd
Top Processes by Memory: ℹ️
 129 MB com.apple.WebKit.WebContent
 107 MB com.avast.daemon
 107 MB Dock
 94 MB Finder
 64 MB Safari
Virtual Memory Information: ℹ️
 61 MB Free RAM
 1.60 GB Active RAM
 1.56 GB Inactive RAM
 767 MB Wired RAM
 15.59 GB Page-ins
 8 MB Page-outs
Diagnostics Information: ℹ️
 Mar 22, 2015, 06:12:25 PM /Library/Logs/DiagnosticReports/com.avast.daemon_2015-03-22-181225_[redacted].c pu_resource.diag [Click for details]
 Mar 22, 2015, 06:09:41 PM Self test - passed
 Mar 22, 2015, 05:56:13 PM /Library/Logs/DiagnosticReports/com.avast.daemon_2015-03-22-175613_[redacted].c pu_resource.diag [Click for details]
 Feb 27, 2015, 11:21:00 PM /Library/Logs/DiagnosticReports/Kernel_2015-02-27-232100_[redacted].panic [Click for details]

Installation problem on new macbook pro i7 How do I get a DMG or firefox icon on desktop?

I can't see anything but the name label on the DMG file. The blue dialogue box only has the applications folder in it. I tried installing both 3.6 and 4 beta versions with the same result.

Make sure that Firefox gets installed properly. 
Open the DMG file and drag to Firefox program to the application folder on your hard drive. 
You shouldn't double-click the Firefox application to run it from the disk image, but drag it out of the DMG folder instead. 
See [[Installing Firefox on Mac]] 
See http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X

Copy file from mounted DMG to the Applications folder?

I'm wanting to copy file (application) from a mounted DMG to the Applications folder. Something like:
tell application "Finder"
try
copy "Volumes:Dropbox Installer:Dropbox.app" to folder "Volumes:Macintosh HD:Applications"
end try
end tell
(But that doesn't work).
Preferably overwriting the existing application in that folder. Any help would be greatly appreciated.

tell application "Finder"
duplicate file "Volumes:S001TEST:S001-S001c-TEST.zip" to folder "Volumes:Macintosh HD:Applications" with replacing
end tell
I tried this principle in Applescript (Mavericks) and received error...
Finder got an error: Can’t set folder "Volumes:Macintosh HD:Applications" to file "Volumes:S001TEST:S001-S001c-TEST.zip".
"001TEST" is a disk image with filename of "S001TEST.dmg"
Any ideas why this won't work?

In trying to update I received this message: Firefox 3.6.3(2).dmg.part could not be saved, because the source file could not be read.

In trying to download an update I first received: "There were problems checking for, downloading, or installing this update. Firefox could not be updated because: No data was received (please try again)" It also gave a link to download manually. When I tried from the Firefox website I got: /Users/(deleted for privacy)/Desktop/Firefox 3.6.3(2).dmg.part could not be saved, because the source file could not be read.
Try again later, or contact the server administrator. I tried this 3 times.
== This happened ==
Not sure how often
== Mon around 11 am, central time, May 17, 2010

I have tried downloading the file several times and get the same message: "No data received." I have no other system problems, I navigate well to other sites, but I'm unable to download this upgrade. Any suggestions?

30GB of space disappears on External Drive after failed DMG copy via USB

I have a 298.1 GB external Western Digital hard drive connected to my iMac by a USB 2.0 cable. It is formatted in NTFS-3G so I can use it with both my PC and Mac. Yesterday in Disk Utility I created a 50GB 256-bit encrypted DMG and told Disk Utility to save it on a folder in my external drive. It got to about 20GB and then my house's power went out. A few hours later when the power came back on, I turned on my computer, and the available space on my external hard drive went down from about 100GB to 68.21GB.
The first thing I thought was that the DMG transfer ended prematurely so I should just find and delete the incomplete DMG from the hard drive. So I went to the folder I saved it in and it was not there. I checked all the folders and I couldn't find any DMG in there. Then I went to the root of the external drive and used Get Info to find the space each folder took up. It adds up to 194.12 GB. So I subtracted 194.12 from 298.1 and got 103.98. If I'm supposed to have 103.98 GB, why do I only have 68.21 GB available? I double and triple checked the size of everything on the disk and I still should have about 30GB more than I do. The 30GB just disappeared.
I tried verifying the disk in Disk Utility and got:
2009-06-14 11:12:33 -0400: Verifying volume “SHADUSMEDIA”
Starting verification tool: 2009-06-14 11:12:33 -0400
2009-06-14 11:12:35 -0400: Read defaults value for LOG_LEVEL: 2
2009-06-14 11:12:35 -0400: Read defaults value for UBLIO_ENABLED: 1
2009-06-14 11:12:35 -0400: Read defaults value for PROBE_DISABLED: 0
2009-06-14 11:12:35 -0400: Read defaults value for MOUNTRDISKSENABLED: 1
2009-06-14 11:12:35 -0400: Read defaults value for NFCONV_ENABLED: 1
2009-06-14 11:12:35 -0400: Read defaults value for ALWAYS_RECOVER: 1
2009-06-14 11:12:35 -0400: ntfs-3g script invoked with command line "/System/Library/Filesystems/ntfs-3g.fs/ntfs-3g.util" "-v" "/dev/disk1s1"
2009-06-14 11:12:35 -0400: Invoking user: MP
2009-06-14 11:12:35 -0400: [Verify] Entering function Verify.
2009-06-14 11:12:35 -0400: ** No NTFS file system checks have been implemented yet.
2009-06-14 11:12:35 -0400: ** Reporting that the volume is fine without checking anything.
2009-06-14 11:12:35 -0400: [Verify] Reporting that the volume is fine, even though that may not be the case (no fs checks performed).
2009-06-14 11:12:35 -0400: [Verify] Returning from function Verify.
Verifying tool completed: 2009-06-14 11:12:42 -0400
So it appears that it's only telling me that it's fine without even checking. I then tried repair disk and got the error message:
2009-06-14 11:14:25 -0400: Verify and Repair volume “SHADUSMEDIA”
Starting repair tool: 2009-06-14 11:14:25 -0400
2009-06-14 11:14:26 -0400: Read defaults value for LOG_LEVEL: 2
2009-06-14 11:14:26 -0400: Read defaults value for UBLIO_ENABLED: 1
2009-06-14 11:14:26 -0400: Read defaults value for PROBE_DISABLED: 0
2009-06-14 11:14:26 -0400: Read defaults value for MOUNTRDISKSENABLED: 1
2009-06-14 11:14:26 -0400: Read defaults value for NFCONV_ENABLED: 1
2009-06-14 11:14:26 -0400: Read defaults value for ALWAYS_RECOVER: 1
2009-06-14 11:14:26 -0400: ntfs-3g script invoked with command line "/System/Library/Filesystems/ntfs-3g.fs/ntfs-3g.util" "-y" "/dev/disk1s1"
2009-06-14 11:14:26 -0400: Invoking user: MP
2009-06-14 11:14:26 -0400: [Repair] Entering function Repair...
2009-06-14 11:14:26 -0400: [Repair] Marking volume to be checked at next Windows boot.
2009-06-14 11:14:26 -0400: [Repair] "/usr/local/bin/ntfsfix" "" currently disabled.
2009-06-14 11:14:26 -0400: ** /usr/local/bin/ntfsfix has been disabled because of volume corruption issues.
2009-06-14 11:14:26 -0400: ** If you still want to try fixing your volume, use /usr/local/bin/ntfsfix from the command line...
2009-06-14 11:14:26 -0400: [Repair] Returning from function Repair with FSUR_INVAL.
2009-06-14 11:14:26 -0400: Error: Filesystem verify or repair failed.2009-06-14 11:14:26 -0400:
2009-06-14 11:14:26 -0400: Disk Utility stopped repairing “SHADUSMEDIA” because the following error was encountered:
Filesystem verify or repair failed.
2009-06-14 11:14:26 -0400:
I tried restarting my iMac and disconnected and reconnecting the cable and that didn't work. I plugged it into my PC and it still says that all the files on my external drive add up to 194.12 GB. Which still means I should have 103.98 GB of free space instead of 68.21 GB.
So I'm stumped now and not quite sure what to do. Here is the information about the external drive from Disk Utility:
Name : SHADUSMEDIA
Type : Volume
Disk Identifier : disk1s1
Mount Point : /Volumes/SHADUSMEDIA
File System : Windows NT Filesystem (NTFS-3G)
Connection Bus : USB
Device Tree : IODeviceTree:/PCI0@0/USB7@1D,7
Writable : Yes
Capacity : 298.1 GB (320,070,288,384 Bytes)
Free Space : 68.3 GB (73,348,239,360 Bytes)
Used : 229.8 GB (246,722,048,512 Bytes)
Number of Files : 145,472
Number of Folders : 0
Owners Enabled : Yes
Can Turn Owners Off : No
Can Repair Permissions : No
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : No
Supports Journaling : No
Journaled : No
Disk Number : 1
Partition Number : 1
You can see on there it says I've used 229.8 GB, when I've actually only used 194.12 GB. Here are the specs from System Profiler for my iMac:
Model Name: iMac
Model Identifier: iMac5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: IM51.0090.B09
SMC Version: 1.8f2
Serial Number: QP6450GKVUX
I'm running Mac OS X Leopard 10.5.6. If you need any more information just ask, I'd really like to get my 30GB back. Thanks in advance.

Can anyone help?

Greetings world.I have created a dmg. of my entire iomega ext HDD via disk utility using a mac book pro. It is currently sitting on the desktop. I have erased the iomega and now I can not understand how to put the dmg back.

It is safe to say that i need help..................
let me start at the beginning.
I have 1 2008 imac. always a pleasure never been a problem. Attached to it i have an iomega 500gb ext drive. also been ok.
until now!!
The HDD would not mount. Disk utility suggested that it was ok so i tested the imac HD. I got error code 4MOT/2/40000004: HDD- 1502. This doesnt worry me at the moment.
I attached iomega to my Mac book pro and again it would not mount. The disk utility did tell me that the iomega needed repair. it advised that i should wipe it and restore.
So I used the MB Pro disk utility to create a DMG. and saved it to the desk top. I then erased the iomega. did a repair and it all seemed ok. So then i try to do a restore.
After a very long time it said internal error with the dmg. using disk utility i did a convert dmg (compressed) and saved it to the iomega. middle of the night job!!
got up this morning and indeed it had sent the DMG to the iomega. But i could not open it. The iomega itself seemed dandy asking me if i wanted to use it as a time machine etc and it mounted ok and i saved a small jpeg to the iomega as well. I then thought that maybe when i did the convert as a compressed file i made a mistake. i'm guessing it should be a read and write so i started all over again.......... wiped iomega (which was quite quick) then tried the convert tool again.....it trys for a while then says there is not enough disk space...........I'm not sure which disk it is refering to.??
I have purchased a 1tb hard drive today incase the iomega is some how full up.
So really my question to the world is .........Help?

well no reply from the community. sniff- do i stink!? - probably a little bit. If i have lost all that data then I'm gonna really really pong.
Any ways i have purchased a 1tb usb HDD and have managed to duplicate the dmg file onto it. however still unable to mount the **** thing. so now i have ordered disk warrior which will be in my possession tomorrow.
fingers toes eyes crossed.

Need help booting from DMG file without DVD drive

okay so i have 6 computers with me right now. i need to use one that has a dvd drive to install it on a comp that doesnt via firewire.
1- macbook with superdrive and os 10.5 (cant even open tiger install because its a new macbook
2-iBook g4 with DVD drive BUT the firewire port is broken
3-iBook g3 (one that needs tiger but only has a cd drive)
4-ibook g3 (without dvd drive)
5-powerbook g4 with dvd drive and firewire (for some reason will not read the tiger discs i just burned, even though ive already used them on the ibook g4
6-mac pro with firewire and dvd drive, but the dvd drive is broken.
so seems to me, every computer i have has a weakness for exactly what i need. what i need to know now is if i can boot the powerbook g4 from a DMG file of tiger install disc 1 and install is to the target ibook through firewire. if you have any suggestions on what i should try with the supplies mentioned above, please inform me. thanks!

what i need to know now is if i can boot the powerbook g4 from a DMG file of tiger install disc 1 and install is to the target ibook through firewire.
You can't unless the PowerBook is running Mac OS X Server, in which case the NetInstall feature can be used.
(38733)

The difference between a .dmg file & a .cdr file (using Disk Utility) ?

Hi,
In particular, I created both from a DVD using Disk Utility.
When I chose "read only" a .dmg was created.
When I chose "DVD/CD Master" a .cdr was created.
They are exactly the same size.
Is there any difference ?
Thanks in advance.
Pat De Marco

HI Pat,
From Wikipedia: A file with the extension .dmg (an abbreviation for disk image) uses a disk image format commonly found on Mac OS X. The format allows secure password protection as well as file compression and hence serves both security and file distribution functions. Its most common function is the distribution of software over the Internet. When opened, DMG files are "mounted" as a drive within the Finder.
From: Wikipedia .cdr and ISO
ISO image
Filename extension .iso
Uniform Type Identifier public.iso-image
Type of format Disk image
Standard(s) ISO 9660
An ISO image is an archive file (a.k.a. disk image) of an optical disc using a conventional ISO (International Organization for Standardization) format that is supported by many software vendors. ISO image files typically have a file extension of .ISO but Mac OS X ISO images often have the extension .CDR. The name "ISO" is taken from the ISO 9660 file system used with CD-ROM media, but an ISO image can also contain UDF file system because UDF is backward-compatible to ISO 9660.
Carolyn
Message was edited by: Carolyn Samit

Every time I download anything I get an error message stating ...could not open ....dmg because it is either not a supported file type or the file has been damaged." What do I need to do to fix this problem?

For the last month or so, every time I download anything I get an error message stating "........could not open ...... .dmg because it is either not a supported file type or because the file has been damaged...." I do not know what to do to fix this issue. Any ideas?

hmmm.... try this
basic troubleshooting:
Repair Disk Permissions http://support.apple.com/kb/PH5821
Repair Disk http://support.apple.com/kb/ht1782
reset ACLs http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/

What is an 'SPL-2.dmg' file and how can I get it (the driver) installed?

subject line is question

*My question to Samsung:*
"SCX-4200 driver for Mac OSX.5.5
After downloading the driver from
http://www.samsung.com/us/support/download/supportDownDetail.do?group=&type=&sub type=&modelnm=SCX-4200&language=&cate_type=all&mType=DR&dType=D&vType=L&cttID=2047002&prd_i a_cd=06010300&dispnm=SCX-4200,
the following error message is displayed: 'The following disc images failed to mount - image: SPL2.dmg; reason: not recognised.'
Please advise."
*The reply from Samsung:*
Thank you for contacting us regarding your SCX-4200 and the recent issue you have experienced.
It is difficult to say why this error may have occurred, it may be that the file has been corrupted during transfer. You should try deleting this file again and re-downloading it or possibly even try downloading the file from an alternate location such as below -
http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=uk&C ttFileID=2047002&CDCttType=DR&ModelType=N&ModelName=SCX-4200&VPath=DR/200810/200 81028145509765/SPL2.dmg
Should you wish to discuss this issue further, please feel free to call our IT Helpdesk on 0845 726 7864 quoting your reference number."
*Having tried all that, I did phone them, only to be fobbed off, +'Try re-installing from the CD you got with your printer. If that doesn't work it must be their ([Apple's]) problem.'+*
My MacBook is trying to mount it, according to right-click 'Get Info', using DiscImageMounter, which only returns the error message (above), 'The following disc images failed to mount - image: SPL2.dmg; reason: not recognised.' Disc Utility doesn't tell me much more. What should I do with it?
My printer (Samsung SCX-4200) clicks and warms up when it's sent a command to print, but that's the end of it - it won't do anything else, which is why I went looking for the driver in the first place. Note the Samsung Download Centre site at _http://www.samsung.com/uk/support/download/supportDownDetail.do?group=printsolut ions&type=printsolutions&subtype=monomultifunctionproducts&modelnm=SCX-4200&disp_nm=SCX-4200&language=&cate_type=all&mType=DR&dType=D&vType=L&ct tID=2047002&prd_ia_cd=06010300 says this driver was updated/uploaded 28/10/2008, but I can't get the **** thing to install. Any idea what I'm doing wrong?
Probably also worth noting: the printer works fine with Windows on my MacBook's BootCamp partition.

The dmg files have downloaded to the wrong folder - not finished with the install process

The dmg files have downloaded to the wrong folder - I am at the part of the download/install process where the "Welcome" screen appears asking for me to agree to the license agreement. Somewhere on your site, I read that they should NOT go to the applications folder but to the "Users" folder. Can/should I move/drag the folder with the dmg files into the "Users" folder"? If so, before or after I complete the install? I am running MAC OSX 10.7.4 on a MAC Mini.
Also, when the trial period is over, I will use the license number for the purchased software disks, should the dmg's/folders then be moved to the application folder or stay in the "users" section? I have Purvhased Adobe Photoshop Elements 10 and Adobe Premiere Elements 10, but somewhere on your site it was suggested to download them instead and use the license code at the appropiate time. If someone can help with these questions, I would appreciate it. Thank you

Hi,
In the Welcome screen, you can accept the license agreement and can go ahead with the installation. You will be asked for the serial number. If you don't have one, install it as a trial application. By default, it's installed in the Applications folder. However, you can change the installation folder in the third screen, if you have a reason. Please see the screenshot below:
After installing, you can't move application to a different directory by dragging. You need to uninstall and install it again in the folder of your choice.
Thanks,
Sunil

HELP! Creating symbolic link to home folder for installer DMG

Guys,
I'm in a bit of a bind. I need to create a symbolic link for an installer DMG to distribute a communal Bookmarks.plist to all the computers in my department. Unfortunately 'ln -s ~/Library/Safari /Volumes/Bookmarks/.' doesn't do the trick! While it creates an alias that functions on my machine, when that DMG is compiled and distributed from the original sparse image, the alias fails to link to that location on whoever attempts to mount the DMG. Any ideas?? Thanks!

Symbolic links break when you change the machine on which they were created. Use an standard Mac alias instead as I believe they will work as expected.

Can't copy files from mounted DMG. What's up??

So all of a sudden, I can't copy files from mounted DMG files. It's strange because if there is one file and I drag it to another location, like desktop, it won't copy. If I drag 2 files from the mounted DMG to the desktop one of them copies. If I drag 3, then 2 copy... it's always all but one of the files... never all of them.
I've tried repairing permissions but nothing works. I'm at a loss...
thanks
D
iMac Core Duo 17", 1.5 gig RAM Mac OS X (10.4.8)

Try holding option when you drag the files. This tells the mac to move the files to the desktop of your computer not the desktop folder of the DMG (usually a hidden folder)
If that doesn't work it may be that you need administrative privileges to move the files. Make sure you are logged on as as an administrator by selecting the account tab in system preferences and making sure it says "admin" under your user name. Log on to or create an administration account then try moving the file.
Hope this helps, let me know
Thom

Adobe_flashplayer_e2c7b_Setup.dmg

Similar Messages

Maybe you are looking for