Adobe Flashplayer has stopped working in IE11

Hi all,
My IE11 does not want to Allow Adobe Flashplayer on webpages. I get the announcement on webpages that require Flash that "This web page wants to run the following add-on: 'Adobe Flash Player' from 'Microsoft Windows Third Party Application Compon...'."
When I click "Allow" it reloads the page and the message is shown again and the flash still not working. Flash works perfectly in Firefox.
This started to occur after this update had been installed "Security Update for Windows 8.1 x64-based Systems (KB3011780)".
I have checked so that the add-on "Shockwave Flash Object" is enabled in the browser and that the Active X filtering is not "checked".

Hello Rangvald86,
Do you use the Windows 8.1? Based on my test in my environment, I can’t find the same issue.
Please take the following steps to register the flash.ocx file.
1. Open the notepad and type regsvr32 c:\windows\system32\macromed\flash\flash.ocx
2. Save it as flash.bat and run it as an administrator by right clicking on the file and select run as administrator.
3. Open the website you were unable to open
For more information, please refer to the following thread similar to this issue.
http://answers.microsoft.com/en-us/ie/forum/ie11-iewindows8_1/flash-player-isnt-working-in-ie-11-windows-81/d44b2206-9902-4756-88ea-80124f6d756f?page=1
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Similar Messages

  • Adobe flashplayer has stopped working on this pc

    Adobe flashplayer has just stopped.
    I have tried downloading upto date versions, all my plug-ins are up to date, I have been through all the download suggestions over the last few days, I have had some right crap added and removed from my pc like annoying arcade giant etc etc.
    None of the suggestions work, so what now?

    '''[http://helpx.adobe.com/shockwave/kb/troubleshoot-shockwave-player-installation-windows.html Troubleshoot Shockwave Player installation | Windows]'''
    '''[http://helpx.adobe.com/shockwave/kb/troubleshoot-shockwave-player-installation-mac.html Troubleshoot Shockwave Player installation | Mac OS]'''

  • FlashPlayer has stopped working.

    My FlashPlayer has stopped working.  Pre-loaded on Windows 8.1, Shockwave Flash Object shows as 'enabled' and ActiveX Filter is off.  Any ideas what has caused this?

    Hello Rangvald86,
    Do you use the Windows 8.1? Based on my test in my environment, I can’t find the same issue.
    Please take the following steps to register the flash.ocx file.
    1. Open the notepad and type regsvr32 c:\windows\system32\macromed\flash\flash.ocx
    2. Save it as flash.bat and run it as an administrator by right clicking on the file and select run as administrator.
    3. Open the website you were unable to open
    For more information, please refer to the following thread similar to this issue.
    http://answers.microsoft.com/en-us/ie/forum/ie11-iewindows8_1/flash-player-isnt-working-in-ie-11-windows-81/d44b2206-9902-4756-88ea-80124f6d756f?page=1
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • Adobe Acrobat XI Pro causes an error when starting it - Adobe Acrobat has stopped working. How do I resolve this?

    I've had Adobe Acrobat XI Pro for some time, but yesterday it stopped working and I started having an 'Adobe Acrobat has stopped working' error. It then tells me to Close the Program.
    How do I resolve this?
    Thanks and regards
    Roxanne

    Thanks Pat. I was able to resolve the problem.
    OS is Windows 7 Pro, Adobe Acrobat Pro 11.0.07.
    I went into the Properties file where I identified that Users only had Read & Execute and Read properties, I changed properties for Everyone to Full Control. That fixed the problem.
    I don't know how the properties got changed to just Read & Execute, but there had been an automatic update the night before.
    Regards
    Roxanne

  • "Adobe Bridge has stopped working"

    Just installed CS2 Version 9.0.  Having "Adobe Bridge has stopped working"  Windows 7 Pro 64.  Is there a solution to this problem?
    Thanks?

    Curt,
    Thanks for getting back to me.
    Bridge had worked before.  When I refer to BRIDGE I mean that I go to a
    folder of photos in PS and select file/browse to open.  This feature
    does work with other folders of photos.  It was when I downloaded photos
    from my cell phone into a folder and in PS went to file/browse the
    browser will open and then I get a message "Adobe Bridge has stopped
    working."
    I can still go to another photo folder in PS and select file/browse and
    it will work, the problem is with the photos from my cell photo.
    Do you have any ideas.
    I have the latest  versions of PS.
    Thanks,
    Jack

  • Adobe bridge has stopped working windows 8

    I recently installed adobe bridge cs6 on a windows 8 computer and when the program launches and i browse to a folder with images I see "adobe bridge has stopped working" and the program crashes. Any Idea what I can do to solve this?

    I am having this same problem, but I am using windows 8.1  (64 bit) -  Toshiba Click 2 pro, 1920 x 1080 resolution.
    I just installed Design Standard CS6, everything said these would be compatible,
    http://helpx.adobe.com/x-productkb/global/windows-8-1-compatability.html
    https://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductViewerWithDefaul tFilters?TempOsid=Windows%208.1&Locale=en-us&Architecture=X64&TextSearch=adobe%2Bdesign%2B standard%2Bcs6&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance& Compatibility=Unknown&LastRequested=14
    but I"m having problems with Bridge CS6, Acrobat X, Photoshop CS6 64-bit and Illustrator 64-bit.
    What to do?!

  • Adobe creative cloud has stopped working, all my individual programmes from adobe open and work fine, but when I try to open adobe cloud it starts to open then says adobe cloud has stopped working, looking for a solution then shuts down, I can not open it

    Adobe creative cloud has stopped working, all my individual programmes from adobe open and work fine, but when I try to open adobe cloud it starts to open then says adobe cloud has stopped working, looking for a solution then shuts down, I can not open it at all.

    Without proper system information and the application logs nobody can tell you much.
    Troubleshoot Creative Cloud download and install issues
    Mylenium

  • I am having a problem opening pdf document.  I get error message: "Adobe Reader has stopped working"

    I am having a problem opening pdf document.  I get error message: "Adobe Reader has stopped working" then I get Windows is looking on line for a solution, but then my document closes. I tried uninstalling and reinstalling Adobe Reader XI, rebooted my computer but this did not help.  I get the same message. What to do?

    Can you open Reader by itself?  If so, check if disabling Protected Mode improves the situation [Edit | Preferences | Security (Enhanced)].

  • I have a user getting an error Adobe Acrobat has stopped working  how do I resolve this?

    Adobe Acrobat XI Pro
    This happens at a variety of times.  Sometimes while scanning sometimes while bookmarking sometimes while adding pages from a file.
    What I have done is made sure the program was up to date, a repair install, updated scanner drivers, replace the scanner with a different model, made sure the workstation was current with MS patches.  Any suggestions would be most welcome.
    Thank you,
    Brad

    Thanks for the reply.  Sorry I wasn't clear the version is XI standard.  And I did check for updates.  The program is current.  Still a few times a day the program will crash and my user will have to start over again on the document she is working on.  Very frustrating for her and me.
    The full error is:
    Adobe Acrobat has stopped working
    A problem caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available.

  • Adobe reader has stopped working, any solutions?

    I am having an issue with Adobe reader X.
    I open the program and it works normally, nothing to repport.
    Each time I close the program I receive the error message "Adobe Reader has stopped working)
    I am on Win 7 (32bit) SP1
    any ideas/solutions for this situation?
    Thank you in advance

    I have been having this problem recently (Vista HP fully updated 32 bit) with Reader X. This was a clean install and no 3rd party reg cleaners etc have ever been used. I use Microsoft Security Essentials.
    This problem seems intermitent. Yesterday it happened nearly every time I closed a pdf. Today it hasn't done it once so far. When the problem first happened a week or so back I tried the solutions offered (turn off protected mode) and it did not work. I tried "repair Adobe install" and that too did nothing. Windows problem reports keep saying Adobe updates available... they are not.
    Apart from the message saying that it crashed on closing there is no outward sign of anything amiss. I did however open task manager while the error box was still displayed and it showed two Adobe processes as still running. When I used the error box option to "close program" these processes ended.
    I can't help but feel these problems coincided with a recent round of updates although that may of course, be just that, a coincidence.

  • Adobe reader has stopped working error message after installing reader XI on windows 7

    Adobe reader has stopped working error message when loading reader after installing reader XI on windows 7.
    Does anybody know why ?

    Dear Pat,
    Thank you for your reply.
    It is Ver. 11.0.06 for Acrobat XI
    No, I can't open the Reader at all.  The error message box popped up immediately when I run the Reader

  • Adobe Acrobat X Pro - Error Message : "Adobe Acrobat Has Stopped Working"

    I use Windows 7 - 64bit / CS6 Master Collection that has Adobe Acrobat x Pro.
    When the computer is on for a little while, Acrobat would generate the error message that it has stopped working and then shuts down. Once that error message occurs, I cannot get Acrobat to stay open. It opens the PDF document, stays open for a few seconds then the error message occurs and it shuts down.
    What helps for a short term is to restart the computer. This seems to temporarily remove the error until the computer is on for a while then the error returns.
    This problem repeats. Product repair feature does not work. This has nothing to do with the license, I tried that fix and it made no differnce. I do not have this issue with other Adobe products included in the master collection.
    It seems fruitless and frustrating to send a message to Adobe Support, the run around with pages and links is like smacking walls on every turn, it is obvious Adobe does not want people contacting their support. Service from Adobe for their products is poor.
    I hope that someone here has the answer to the problem. Anyone?

    Ok, here is the update.
    The link: http://helpx.adobe.com/creative-suite/kb/acrobat-failed-launch-30-days.html , leads to a webpage that says to download a fix ZIP file named: "Acrofix.ZIP". It contains the file "acrofix.exe".
    I did use this "exe" file about 2 months ago and it did nothing to fix the issue. I used it again today, because the same issue of "Adobe Acorbat has stopped working", occurred again and again it did not work, the problem of "Adobe Acrobat stopped working" presists. Again the only work around, which is temporary, is to reboot the computer.
    So far these do not work:
    Relicensing or Registering the Licence
    Acrofix.exe
    Anyone else have an answer? - or am I the only one suffering this really annoying issue?

  • I have Acrobat 9.5 and when I try to create pdf from scanner, it displays an error "Adobe acrobat has stopped working". Is there any way I can use this functionality?

    I have Acrobat 9.5 and when I try to create>pdf from scanner, it displays an error "Adobe acrobat has stopped working". Is there any way I can use this functionality?

    Provide you have Acrobat 9 installed in an OS for which Acrobat 9 is compatible then you can use the functionality.
    As well, you need a scanner connected, powered up, and the software installed. Acrobat 9 "prefers" TWAIN drivers.
    Always visit the scanner vendor's site and download - install the latest greatest software.
    n.b., The Acrobat 9.x product family passed into "End of Support" mid-year 2013.
    As well the Acrobat 9.x product family is not compatible with contemporary OSs.
    Be well...

  • Adobe reader has stopped working

    Need help opening my pdf files. I keep getting a crash error that states "Adobe Reader has Stopped Working"

    Try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].

  • "Adobe Indesign has stopped working"

    Hi,
    I keep getting the same notice over and over again  “Adobe Indesign has stopped working” (direct translation from Swedish). What is wrong?

    Hi!
    I really need help with this problem.
    InDesign keeps shutting down when I´m running the spellcheck.
    What do I do?
    I have the latest version of InDesign (Creative Cloud).
    Regards
    Linda Karlsson
    Borago AB
    Sweden
    Från: Peter Spier [email protected]
    Skickat: den 6 februari 2014 14:44
    Till: Linda Karlsson
    Ämne: “Adobe Indesign has stopped working”
    Re: “Adobe Indesign has stopped working”
    created by Peter Spier<http://forums.adobe.com/people/P+Spier> in InDesign - View the full discussion<http://forums.adobe.com/message/6092156#6092156

Maybe you are looking for