Adobe form as a transaction

hi all,
i would be obliged if i can get to know as to we can get the adobe form as a transaction!
thanks in advance
mithun

Hai mithun,
Just refer these links........
Dynamic Adobe form generation
Adobe Form assignment
Regards,
Srikanth.
Reward points if helpful.

Similar Messages

Adobe form Issue in transaction PR05

Hi,
We have a requirement to change the standard Adobe form "PTRV_EXPENSE_FORM" of transacation PR05. We need to hide the text 'Simulation' from the output. I could change the setting of 'Simulation' subform. But after activation the same appears again. Please suggest what is to be done.
Any type of help would by highly appreciated.
Thanks
RK

Somebody, Please throw light on this.

How to refresh the data in Adobe forms

Hi,
I have created an Adobe form through SFP transaction and a print program which passes data to the form through an internal table. The probelm is, first time the data is getting printed perfectly as per the internal table, but next time when I again run the program for new set of data, the form doesn't display the current data. It still has previous data in it, though the internal table contains the correct data. Can any one tell me why this is happening? Is there any way to refresh the adobe form data?
Thanks in advance,
Kiran

Hi,
Your Try and check this statement program level...
FREE <itab>
Regards,
Ansari.

How to use Adobe forms with F150 Dunning Run

Hi,
I want to use Adobe forms with the transaction F150 Dunning Run.
How do I get the adobe form in customizing? I have put the FM 'FI_PRINT_DUNNING_NOTICE_PDF' in business transaction Event, BF31 - P/S modules of SAP app - 00001720, Fi-FI. But it is still not recognizing the ADOBE form.
Any help is greatly appreciated.

Hi,
I am also working for calling custom adobe form instead of sapscript.
While configuring BTE 1720, i noticed that configuring BTE only FI-FI application does not solve the purpose. You need to assign function module FI_PRINT_DUNNING_NOTICE_PDF for all Application Area Indicator.
Adding to IS-PS will allow to print for customer.
This solved my problem. But this setting is global so you need to take care of it.

Issue While printing / Previewing a Adobe form in Web Dynpro ABAP application

Dear All,
We have designed 4 different adobe forms using SFP transaction for 4 different countries in SAP system.
Every country have different terms and conditions and therefore we have placed static texts (Hardcoded text) with text in different styles. Some text is in bold, some in different font (Bold, Italic). Font and Paragraph settings of the text was done as per expected. All the forms have same font and paragraph settings.
When we Launch Web Dynpro ABAP application to open the form in Print preview or to take print, form is not getting displayed / printed as it is designed in SFP. But if you open the form in SFP, everything looks fine.
It is working fine for 3 different forms but problem with only 1 form.
Kindly guide what is the reason for this strange issue when previewed or taken print. It is very urgent.
Thanks,
Bharath.K

Dear All,
Thanks for your responses.
We had identified the reason.
Customer has provided terms and conditions for all 4 countries in PDF document. Along with PDF, for 3 out of 4 countries customer has shared pre-prepared word document with pre aligned and justified terms and conditions as per expected outcome. We copied this text from word to Adobe form layout. It worked fine. For 1 country, customer have not shared terms and conditions in word document. Therefore we had copied text directly from adobe PDF document in to Form layout. Then this issue happened.
Solution for this issue is to, prepared a word document with expected alignment and justification of terms and conditions text . Then copied from word to adobe livecycle designer form layout. It worked fine.
Thanks,
Bharath.

Adobe Form in PT60?

Hello all,
I would like to ask you about the possibility of getting an Adobe form using the transaction PT60 (time evaluation transaction).
Up to now, after evaluating one employee we are getting a plain form, using "write" instructions.
Would it be possible to get an adobe form instead of this plain form when pressing the corresponding button?
Is it necessary to use another transaction (similar to the PT60) to get the adobe form?
Please, let me now the steps to follow.
Thank you very much in advance.

Hey Easwar,
Thanks for the reply.
However, we have been able to provide links on the CRM UI screen which will open up PDFs in a popup.
We were wondering whether it could be done within the same screen itself and not in a popup.
Again, there is a concept of Webdynpro islands in ABAP which suggest that we might be able to integrate Adobe Flex components in CRM.
Regards,
Ravi Bhatnagar

Save interactive adobe form in presentation server through report program

Hi All,
          We have developed a interactive adobe form in SFP transaction and we are calling this form
          from report program and we are able to save the form in presentation server.
          But my scenario is that user provides input in interactive adobe form and i need to save the interactive adobe form
          in display mode that to in presentation server with input values provided by the user.
         could any help to achieve this or guide me if i am moving in a wrong path.
Thank you,
Harsha P

It all depends on what you want to do.
If you are planning on users to fill out on-line form only and submit to SAP, it is pretty easy to do (that is once you understand how to create web dynpro and interactive form).
You can also have users fill a form offline and upload to online and save it to SAP.
You do need to know little bit about coding (ABAP or JAVA),
but can be done w/ very minimum coding.
If you are planning on doing in Web Dynpro ABAP,
go to SE 80 and select WebDynpro and create form.
To save data/form to SAP, you probably want to use BAPI or Function module already available so that you don't have to do much coding to save data.
See some of these links for helpful tutorials. Thomas Jung has several good tutorials, but none of them probably have all the information you need... you just have to pick some from here and some from other places... If you have specific question, I will be happy to guide you...
Practical tips for developing with ABAP WebDynpro
Practical tips for developing with ABAP WebDynpro
http://help.sap.com/saphelp_nw2004s/helpdata/en/7c/3545415ea6f523e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/c766e918-0b01-0010-99b1-c2b78cd059b3

How to configure adobe forms in OMLV for printing picking slip

Hello,
I want to configure a adobe form in OMLV transaction. But there is no column for putting adobe forms.
Can you tell me how do configure adobe forms for getting it printed from standard transaction whenever a transfer order is created.
Thanks in advance.

Hi Ajay,
You are completely right that you cannot find anything with smartform in the customizing (OMLV). The reason for it: It is not there. It not even exists. Also the latest version of rlvsdr40 has nothing standard concerning smartforms.
I do not know why it is really necessary to use adobe or smartforms.
The only way is to build a new one (ZRLVSDR40). In that new one you have to use the sapscriptname (from OMLV)and treat it as a smartform- name.
I hope my explanation helps. Success.
Gr., Frank
Below how a smartform is called (from invoice)
determine smartform function module
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname           = lf_formname
    IMPORTING
      fm_name            = lf_fm_name
    EXCEPTIONS
      no_form            = 1
      no_function_module = 2
      OTHERS             = 3.
IF sy-subrc <> 0.
error handling
    retcode = sy-subrc.
    IF sy-subrc = 1.
      MESSAGE e001(ssfcomposer).
    ENDIF.
    IF sy-subrc = 2.
      MESSAGE e002(ssfcomposer) WITH lf_formname.
    ENDIF.
    PERFORM protocol_update.
ENDIF.
CALL FUNCTION lf_fm_name
    EXPORTING
      archive_index        = toa_dara
      archive_parameters   = arc_params
      control_parameters   = ls_control_param
      mail_recipient       = ls_recipient
      mail_sender          = ls_sender
      output_options       = ls_composer_param
      user_settings        = ' '
      is_nast              = nast
      is_vbdka             = vbdka
      is_addres            = addr_key
    IMPORTING
      document_output_info = document_output_info
      job_output_info      = job_output_info
      job_output_options   = job_output_options
    TABLES
      it_vbdpa             = tvbdpa    "Item information
      it_vbdpau            = tvbdpau   "Subitem numbers
    EXCEPTIONS
      formatting_error     = 1
      internal_error       = 2
      send_error           = 3
      user_canceled        = 4
      OTHERS               = 5.

Adobe Form- Error while clicking on the print preview option

Hi,
An exception is being raised as shown below-
ADS: SOAP Runtime Exception:
CSoapExceptionTransport :(100101)
when i am trying to view the print preview of the invoice form (adobe form) in VF03 transaction.Please let me know the reason why this is occurring. I thought may be the form is inactive, but the form is in active state only.

Hi,
Have you seen SAP note 944221? It has some advice on this error.
Regards,
Nick

System is getting hanged while creating Adobe Form Layout

Hello,
I have Adobe Lifecycle Designer and Adobe Document Service Installed on our server, i have created Adobe form interface in transaction SFP and then a new form created with this interface passing the parameter carrid.
While creating from layout, through library section I used Text function, as I drag and drop text in to the layout, system is getting hanged everytime with message 1.275 bytes transferred.
Gurus please help me to understand this error.
Thanks,
Avinash

Get Adobe life cycle designer updated vesrion.
Also check your desktop/laptop if it has good RAM .
Adobe is quite fat application which depend upon ur sys prefomanc.
Hope this will help.
Thanks Dhiraj.

Embedding an existing Adobe Form into a Webdynpro Application

Hi Everyone,
I have an existing adobe form created thro transaction SFP and its working well.
I need to launch the form with a Webdynpro application now. I was able to embed the adobe form into the Webdynpro View. The View's context is supposed to pick up the context of the adobe form automatically.
However I am getting the following error - Either your Interactive form UI element is not bound to a context or a corresponding context does not exist.
I am not sure how to proceed coz the I executed the Adobe from in SFP and its working perfectly and obviously its bound to a context/ interface.
Any Ideas?
thanks for your suggestions in advance !
Liz

Pradeep,
You are right. This time I could bind the context from my interface (even though it was ABAP based).
I have one quick one for you - you mentioned earlier that when we embed an existing form into Web. View, we cannot have an Interactive form even when we check the 'enabled' property. Can you throw more light onto this pls?
The runtime error that i am encountering now says :
Adobe Processing Exception: PDF is not interactive. Data can be only imported into Interactive forms.
the source text of error is:
get result
m_pdf_object->get_document ( importing pdfdata = pdf ).
catch cx_fp_exception into lr_fpexc.
raise exception type cx_wd_general
exporting
previous = lr_fpexc
and this exception is not caught ! I am still lost
thanks again for your help!
Liz

Problem regarding designing adobe form

hi,
we have a assignment.
we have to attach a adobe form to a transaction ME4L(display request for quotation)
so that by default instead of a script an adobe form
should come.
how to attach a adobe form to the transaction using NACE.
is there any requirement of modifying the print program(SAPFM06P) ?
pl suggest the solution as soon as possible.
                                                                      regards
                                                                           swamy.

> how to attach a adobe form to the transaction using NACE.
> is there any requirement of modifying the print program(SAPFM06P) ?
in the NACE transaction you can give the form name against the PDF/Smartform , and choose the Type as 'PDF' in the form routines.
you need to change the Logic to call the Adobeform. (check the programs FP_TEST*)
if you are familiar with Smartform then you can easily do that..
step1# call function FP_FUNCTION_MODULE_NAME
step2# call function FP_JOB_OPEN
step#3 call function 'DYNAMICFUNCTION' <--- from the step1.
step4 # call function FP_JOB_CLOSE
I would suggest you to create the new Driver program(copy the program SAPFM06P) and modify the changes to tigger the Adobeform.

Adobe form doubt???

Iam new to adobe form..i studied all the documents available on adobe form....but still i have some doubts..plz clarify these.....
1)if i want to attach one adobe form to one transaction where can i attach my adobe form?
2)when we write driver program for one form ...how could we call that in program?
3)how can we calculate totals in adobe form?
plz help me.....iam waiting for your valuable replies...

We do allow Adobe Forms questions in this forum only if the question pertains to their usage within Web Dynpro ABAP. I don't see anything in your question that fits that description. You seem to have general forms questions and ones that pertain to the usage by print driver programs. I would suggest that your question is really better suited to the Adobe Forms Forum or the ABAP Print Forms Forum.

Adobe Form, Line Spacing of Paragraphs

Dear colleagues.
I have an Adobe Form (created by transaction SFP in
an ERP 6.0 system, using Adobe LifeCycle Designer 7.1).
This form contains a simple table to display some text in the form.
The table has just one column for strings (type Text field, field
format Plain Text only, value type Read Only).
It works fine. However I would like to reduce the spacing of the text
lines in the table.
Would you please tell me how this can be done?
(I tried the following, but it was NOT successful: I opened palette
"Paragraph". Under "Spacing", the value of "Above:" and "Below:" was
already 0pt. So I changed the option of "Line Spacing:" from "Single"
to "Exactly" and assigned to "At:" a smaller value, e.g. 5pt.
Then I tested my modified form, and I was very surprised: The
spacing of the text lines did not change, but the width of the text
lines was reduced! All letters were truncated: The above and below
part of the letters disappear suddenly.)
Would you please give me some hint?
Best regards,
Holger

Hello Holger,
could you please clarify that you have a table with one column and in each row you have some multi line text and you would like to reduce the distance between the lines or you have one line per row and wish to reduce the distance between the text in each row?
--- Row 1 -----
text line 1
<space>
text line 2
--- Row 2 -----
text line 1
<space>
text line 2
OR
--- Row 1 -----
text line 1
<space>
--- Row 2 -----
<space>
text line 2
Regards,
Ben Patterson

Need help on adobe form

Iam new to adobe form..i studied all the documents available on adobe form....but still i have some doubts..plz clarify these.....
1)if i want to attach one adobe form to one transaction where can i attach my adobe form?
2)when we write driver program for one form ...how could we call that in program?
3)how can we calculate totals in adobe form?
plz help me.....iam waiting for your valuable replies...

Pl. see my answers below...
1)if i want to attach one adobe form to one transaction where can i attach my adobe form?
If ur transaction supports message control technique then u can attach a PDF form and its driver prog. name with an output type from transaction NACE.
2)when we write driver program for one form ...how could we call that in program?
U have to use fms like FP_FUNCTION_MODULE_NAME','FP_JOB_OPEN','FP_JOB_CLOSE'
to call the form.
First get name of the generated function module*
call function 'FP_FUNCTION_MODULE_NAME'
EXPORTING
    i_name     = p_form
IMPORTING
    e_funcname = fm_name.
if sy-subrc <> 0.
message e001(FP_EXAMPLE).
endif.
Set output parameters and open spool job*
fp_outputparams-nodialog = 'X'.    " suppress printer dialog popup*
fp_outputparams-preview = 'X'.    " launch print preview*
call function 'FP_JOB_OPEN'
CHANGING
    ie_outputparams = fp_outputparams
EXCEPTIONS
    cancel          = 1
    usage_error     = 2
    system_error    = 3
    internal_error = 4
    others          = 5.
Set form language and country (->form locale)*
fp_docparams-langu   = Language.
fp_docparams-country = country.
*fp_docparams-langu   = 'E'.
*fp_docparams-country = 'GB'.
currency key dependant summing*
loop at bookings into l_booking.
l_sums-forcuram = l_booking-forcuram.
l_sums-forcurkey = l_booking-forcurkey.
collect l_sums into t_sums.
endloop.
Now call the generated function module*
call function fm_name
exporting
    /1bcdwb/docparams        = fp_docparams
    customer                 = customer
    bookings                 = bookings
    connections              = connections
    t_sums                   = t_sums
exceptions
    usage_error              = 1
    system_error             = 2
    internal_error           = 3
    others                   = 4.
if sy-subrc <> 0.
call function 'FP_GET_LAST_ADS_ERRSTR'
    IMPORTING
      e_adserrstr = error_string.
if not error_string is initial.
    we received a detailed error description*
    write:/ error_string.
    exit.
else.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endif.
Close spool job*
call function 'FP_JOB_CLOSE'
exceptions
    usage_error          = 1
    system_error         = 2
    internal_error       = 3
    others               = 4.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
          with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
For details see the std. example prog. FP_EXAMPLE_01.
3)how can we calculate totals in adobe form?
Within the form interface u can calculate it or u can use the Javascript or formcalc scripting language to do the same.
Regards,
Joy.

Adobe form as a transaction

Similar Messages

Maybe you are looking for