Adobe Form configuration error

Dear All,
I have configured my adobe forms on an abap+java stack. once i try running a program on tcode: SFP, on execution it gives the following error:
System Error
FPRUNX
Message no: 001
Could you please help me sort this problem.
Thanks!

Hi,
I think you have a java stack. So just login to your java stack using visual admin then navigate as below
Cluster>services>Destinations
Double click on it then you will find the destinations on the right hand side, navigate to http
then create new destination by clickin on the new button at the bottom
Name the new rfc as FP_ICF_DATA_<SID>
Then enter the url as http://server:port here port will be abap http service port (normally it will be 8xx1, check in smicm)
enter the remaining details and select the authentication as basic and enter the adsuser and password for it.
save and test dont worry if it fails.
Now execute the program. Your pdf configuration should work fine now:
Please refer the below link if you have any problems:
http://help.sap.com/saphelp_nw2004s/helpdata/en/37/504b8cbc2848a494facfdc09a359b1/frameset.htm
Regards,
Vamshi.

Similar Messages

Adobe form layout error and Webdynrpo IE throwing error

Hi ,
If the user logu2019s into the network using Citrix ICA Client to access the server. He is able to access the remote server but if he tries to view the IE( internet Explorer ) of webdynpro application or layout of adobe form he gets the error in both cases u2026
Could any one explain what could be the problem?
Is it related to some port access or
Is it related to some permission that has to be included with the VPN .
Note : I am using VPN to access the server

Hi Vini ,
I am not using IE 7.0 v ... I am using IE 6 ...
Can you think other reason apart from the developer side ....
Can it be a configuration issue ........
Configuration - not of the SAP gui but the server which i am accessing .. Is it allowing me to have web application or we certain setting from which you can block the person to execute the web application ....
Please let me know if you can ....
Thanks ,
Om

Adobe forms runtime error

Dear All,
iam new to new Adobe forms
when iam trying to execute through transaction SFP
iam getting this following error :System error message FNAUX
please help in this regards

Hi,
i got exactly the same error after installing nw2004s SP07 sneak preview.
I checked oss note for changing the hostname - without success.
But now i found the reason. I missed to configure the : "Destination URL for the Adobe Document Services" as described here:
http://help.sap.com/saphelp_nw2004s/helpdata/en/02/560f41ca73d349e10000000a1550b0/frameset.htm
Hope this helps.
Regards
Matthias

SAP Adobe form getting error when printing QRCODE

Dear experts,
In my program i called Adobe forms.
In the interface I pass below code
DATA: lv_nl TYPE string,
 lv_n1 TYPE xstring,
 lv_t1 TYPE xstring,
 lv_tb TYPE string.
lv_n1 = '13'.
lv_t1 = '09'.
BREAK-POINT.
CALL FUNCTION 'CACS_CONVERT_HEX_TO_STRING'
 EXPORTING
 xstring = lv_n1 " <== Your value here
 IMPORTING
 cstring = lv_nl.
CALL FUNCTION 'CACS_CONVERT_HEX_TO_STRING'
 EXPORTING
 xstring = lv_t1 " <== Your value here
 IMPORTING
 cstring = lv_tb.
CONCATENATE gv_sc gv_po1 gv_pa1 lv_nl gv_in1 lv_tb gv_exdat.
I am getting an error
Exception SYSTEM_ERROR
Message ID: FPRUNX Message number: 001
Message:
ADS: com.adobe.ProcessingException: com.adobe.Processin(200101)
Kindly check and suggest me .
Gopi

Hi Gopi,
Looks like your ADS service is down. Contact your Basis Team.
Run program FP_TEST_03 to verify the ADS service.
Refer to thread
http://scn.sap.com/thread/224489
Regards
Sandy

Adobe Form output error in Webdypro

Hi Experts,
I created an adobe form using webdynpro.While executing i am getting an error:
"WebDynpro Exception: ADS call failed ADS: com.adobe.ProcessingException: com.adobe.ProcessingException: Could not retrieve a password for credential: ReaderRights(200,101). "
Please help me to solve this issue.
Regards,
Arun.

Am not sure that one.
Adobe Reader (>= 7.0) must be installed on your local computer (see SAP Note 834573)
check this link
http://help.sap.com/saphelp_nw70/helpdata/en/45/2fbd67361003c3e10000000a1553f6/content.htm
http://www.sdn.sap.com/irj/sdn/adobe
and contact ur basis. dont get bolts on urs.
regards
Srinivas
Edited by: sanasrinivas on Oct 3, 2011 7:33 AM

Adobe CS5 Configuration Error 16

Hi,
I am having an issue on my Macs running Adobe CS5 installed via Adobe's default installer with a volume license key. I have local non-adminstrator mobile user accounts that authenticate to open directory. They are non syncing.
On some machines, when a mobile user logs in and tries to run any Adobe app, there is a pop up with CS5 Configuration Error 16. Please reinstall Adobe CS5. I've checked the permissions of the directories listed in http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html#main_AdobeP CD
and they are correct. I've determined that the root cause is a cache.db-journal file that belongs to a different user. If I delete this file (as admin), the problem goes away. What causes this file to exist? What causes it to persist between users? Should I add a login script to delete the cache.db-journal file if it exists?
Thanks.

I finally got everything working, despite the ineffectual help of the Adobe support team. Maybe my solution will be helpful.
I loaded a duplicate of my system saved BEFORE installing the Cloud Manager onto another drive. Then I loaded the Cloud Manager onto my current boot drive and sure enough, got the Error 16. Then I loaded the OLD version of the Adobe PCD file from my duplicate drive. No go. Then I loaded the OLD SLStore file. Still Error 16.
BUT then I replaced the SLCache folder and BINGO! problem gone. I noticed in the folder is another called SLConfigs. I am not sure it is a permissions issue or something that happens to this file when the Cloud Manager updates these files, but by reloading the pre-install version of this foldeer I have fixed the problem. I repeated the fix on another machine. I have now downloaded the CC apps with no issues.

Adobe Form Translation error Omitted Objects (Could not be Converted)

Hi,
I am new to this forum. I have an issue with Adobe form Translation. Through SE63 (or through the form translation itself) , whenever I try to translate into any language it gives me an error " Omitted Objects (Could not be Converted)". And the translation doesnt get saved. I tested with other forms and the translation works perfectly fine. Its the problem only with this particular form. In fact any change gives error. For e.g. I copy the English the translation to the Greek or the Hungarian one, and if I delete a character and save it it gives me an error.
Please help me if you have faced similar issues have any knowledge about it.
Thanks in advance
Shivam

Hi David,
Thanks for answering my query. I had installed a new patch and even that did not work. However I managed to make it work. I dont know if its the correct way but it worked for me. On furthur analyses I found out that the problem was with XML tags. This was throwing an error. Also, on looking at the translations I Observed that there were few close tags "</trans-unit> " which had no open "<trans-unit>" for them. I simply deleted the extra close tags and the translation worked fine after that.
Point to be noted is that the extra tags were not there in the original english translation. They only appeared when I tried to change the Greek or Hungarian translation and saved them.
Hope it helps anybody.
Thanks.

Adobe Forms - Translation error (Omitted Objects (Could not be Converted):)

Hi Experts,
I have developed an invoice(adobe forms) in my development server and translated this invoice for FRENCH(F) and moved this request to Quality server and now i am trying to translate the same form for GERMANY(DE) in dev server, i am getting a message when i am saving the object "Omitted Objects (Could not be Converted):" and the text are not changed (which means english text remains not changed while translating into DE)
i hope it is not related to SAP Logon GUI problem, because i developed a sample form and i tested it for some languages(while translating, it has not pgiven any error message like "Omitted Objects (Could not be Converted):". am using SAP 710 release and patch 14)
Please help me to solve this problem
Thanks and regards
Vijayendran.R

HI Priya,
Thank you, i ahve implemented the same..
it is working fine..
Thanks & Regards
Vijayendran.R

Standard adobe form workflow error

Hey Expert,
I am using the standard workflow template WS17900260 for any adobe form. In this task there is a task which is TS17900108. I have some workflow that end in error because of this task raising an exception "Exception CX_SY_NO_HANDLER trigger.... An exception with the type CX_HRASR00_PROCESS_MODELLING occurred but was neither handled.
I have tested the workflow with the same set of data and the wierd thing is only some of the workflow end in error.
Anyone have any idea?
Thanks
Regards,
Bryan

Hi Brian,
I am not sure , but would just try to give you pointers:
1. Techncial reason for workflow going to runtime error is, at this step in workflow, if there is an exception raised, it is not modelled in workflow.
2. This exception may be raise dif scenario, steps or process realted data is not available during processing of the task.
3. Authorization for specific activity is absent.
Regards,
Akshay

Adobe form/reader error

Hi
We are working on PCR forms in MSS and having some issues with certain forms.
I am UNABLE to select any option in the PCR Adobe form's DROPDOWN LIST
BOX and any Adobe form which has a dropdown list comes up with an error
message "message limit exceeded. Remaining n errors not reported" when 'n' could be any number.
We are on EP 7, ECC6.0 (NW2004s) and Adobe Reader 7.0.8
I tried this with and without the xACF component, still having the same issue.
Any recommendations on how to solve this?
Thanks
Regards
Michael

Hello Michael,
All the PCR forms are ZCI ased forms. Hence, working with or without ACF does not make a difference. Most probably, you are missing the dynamic mapping for the DDLs. Please open the form in the designer and select the DDL. Under the "Object" > "Binding" tab, click on the "Specify Item Values" link. This will popup a "Dynamic Properties" window. Could you please tell me what do you see there ? If you have not changed this dynamic property you will see the following entry: "$record.sap-vhlist.REPLACE_THIS.item[*]". You need to replace the "REPLACE_THIS" portion with the appropriate context structure here for the DDL under consideration. For example, if you have a context structure as follows:
[code]Context
 DDLData (dataSource node)
 ValueHelpDDL (attribute of type String mapped to DDL)[/code]
Your SOM expression should look like:
[code]$record.sap-vhlist.ValueHelpDDL.item[*][/code]
Now, let us take a more complex context structure:
[code]
Context
 DDLData (dataSource node)
 MyDDLData (internal node)
 DDLDataItems (one more internal node)
 ValueHelpDDL(attribute of type String mapped to DDL)
[/code]
In the above case your dynamic binding should be as follows:
[code]
$record.sap-vhlist.MyDDLData\.DDLDataItems\.ValueHelpDDL.item[*]
[/code]
Notice how the "\."s are inserted in between to separate the context structure. Make sure that the node names are correct. When the changes are done, please redeploy the application and try again.
Note: Please do not change anything inside the "DO NOT MODIFY" section. If you think that there is a bug or a problem with the code, please report it to SAP immediately. That way we can avoid any potential conflict.
Best Regards,
Krish

Adobe Forms - Usage Error

Adobe Forms work fine in the development system. However in the quality system while testing it is aborting with a USAGE ERROR. All these jobs for printing are background jobs.I have used FP_JOB_OPEN, form function call and FP_JOB_CLOSE in the correct order. Are there any other things that have to be handled in the program/system ?

first of all make sure the ADS is working well for the test system (the connection in SM59 or something else could be wrong).
if you´re sure ADS is ok for the system, start working with the form. In my opinion the problem is with an unexpected value coming into a field. Like a character coming into a datetime field or something like that.
Debug the form (and/or use ADS trace) and check the values. Maybe you will find something that does not make sense.
Cheers Otto

SAP Adobe form configuration

Hello,
I am new to SAP adobe forms. For configuring output type to a particular business activity, we go to NACE. There we can attach if print output type shoud be a smartform or sapscript. But I don't seee option for Interactive Adobe form. Where do we link Adobe form for output type ?
I assume my question makes sense since I am new to Interactive form.
I appreciate your inputs and guidance.
Regards,
Rajesh.

Solution: There is not configuration such as NACE for adobe forms. The interface in transaction ocde SFP defines the ouput that can be used for a given business transaction.
Thanks.
Regards,
Rajesh.

PCR Adobe Form generation error

Hi,
I am trying to create PCR. I followed ISR Cook book from Service market place. When i try to save Adobe form it is asking me to activate the form when i say activate it it is giving error.
An error occurred when generating the Adobe Form
Message no. QISR402
What could be the problem?? How to solve this??
Thanks

Hi Santhosh,
You can try the following..
In the backend use Tcode SE91.. fill in QISR as the Message Class & 402 as the Message Number and click on the 'Where-Used List' icon in the menu.. If the message is not triggered dynamically, it will take you to the program where it is triggered.. may be that will help you locate the error..
Regards,
Suresh Datti

Adobe Form Creation Error - Invalid Response Code: (401) Unauthorized

I'm trying to generate an impersonalized form in Guided Procedures. I got an error.
I checked the SAP logs and the error is
Invalid Response Code: (401) Unauthorized. The requested URL was:"http://hostXX:portXX/AdobeDocumentServices/Config?style=document"
Before this error occurs I see an alert
LOGIN.FAILED
User: N/A
Authentication Stack: com.adobe/AdobeDocumentServices*AdobeDocumentServices_Config
Login Module Flag Initialize Login Commit Abort Details
1. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule SUFFICIENT ok exception true Authentication did not succeed.
I've checked the ADSUser and its not locked. Configuration and everything looks fine. I've tested the ADS connections too on SM59.
We have similar configuration for DEV and its working fine there.
Any help on this is highly appreciated.
Version - SAP 2004s SP16
Thank you,
Srinivas

I had a similar problem with authorization failed for the ADSuser. My problem however only occurs at night when the system is the least used.
We have changed two things which I believed have now solved the problem.
1. Make sure all j2ee servers in the cluster uses localhost for the web service destination. Our system was configured to use the central instace forcing all request to a single server.
http://help.sap.com/saphelp_nw04/helpdata/en/4f/a00d41921bf023e10000000a155106/frameset.htm
2. Check maximum number of users in VA. Ours was set to only 300 due to some earlier performance problems. Default is unlimited I believe, so it shouldn't be a problem normally. (Global configuration -> Server -> Security provider-> "MaxUsersCount")
My conclusion is that we ran out of login sessions during night time for some unknown reason, causing a authorization failed exception on the app servers.
Plausible?
best regards,
Richard Linnander

Adobe form javascript error

hi experts,
i am new to adobe interactive forms. i have created a simple form with some input fields which refer to abap webdynpro context and added a submit button from webdynpro activex menu. the click event is created in abap web dynpro. when i execute the webdynpro application i am seeing the form, but at the top i see the following message
"javascript is currently disabled and this dcoument uses it for some features. enabling javascript can lead to potential security issues"
at the right side of the error there is a button "options" . when i click that and selected "enable javascript for this document" . but the error still reamins. when i select the option for the second time i get a user session time out error in the browser.i am using windows 7. pelase suggest what settings i need to make?
thanks

hi,
i am using ZCI and webdynpro native submit button now. i have also placed the script code which was given by u in some other discussion
                 // DO NOT MODIFY THE CODE BEYOND THIS POINT - 705.20051114114126.253659.250577 - SubmitToSAP.xfo
                      ContainerFoundation_JS.SendMessageToContainer(event.target, "submit", "", "", "", "");
                      // END OF DO NOT MODIFY
but still it is not working. we are using adobe live cycle 7.1 and our ECC version is 7.01 level 006. i will try in a windows XP machine

Adobe Form configuration error

Similar Messages

Maybe you are looking for