Adobe Form: Could not start Layout Designer (see long text) - FPUIFB 086

Hello Gurus,
I have an issue when I working in SFP transaction, after create interface and form, When I switch to Layout Tab, I get and issue, please check my image blow:
Could anyone help me?
Thanks!

Please let me know the path and it can be used permanent ? or it will ne expired ?
Thanks
Edited by: satheesh0812 on Nov 29, 2011 12:17 PM

Similar Messages

Could not start Layout Designer (see long text)

Dear All,
Could not start Layout Designer (see long text)
Message no. FPUIFB086
Diagnosis
The forms design tool for developing the form layout could not be started; either it is not installed or there are errors in the installation.
Procedure
Make sure that you have the forms design tool installed on your desktop (the tool is part of the SAPGUI installation).
Refer also to SAP Note 1121176.
Note : I have already checked forums and also the long text file , i have installed SAP gui 720 with latest patch even though , we are getting the same error . or i have to installed ADOBE LIFE CYCLE DESIGNER to user PC ?
Note :
One of the forum is mentioned ,we can also download and install the newest SAP GUI (what is 7.2 i believe) which has LCD as a part of installation.
but still i am getting error .
SAP gui Details :
SAP PC VERSION INFORMATION: saplogon.exe
MAIN MODULE INFORMATION:
   saplogon.exe
   SAP Logon for Windows
   720 Final Release
   7200.3.9.1071
   1286983
SYSTEM INFORMATION:
   Operating system: Microsoft Windows XP 5.1 (2600)
                     Service Pack 3
Kindly advise.

Please let me know the path and it can be used permanent ? or it will ne expired ?
Thanks
Edited by: satheesh0812 on Nov 29, 2011 12:17 PM

Could not start Layout Designer

When i press layout button in adobe forms (SFP) i am getting the following error..
LONG TEXT:
Could not start Layout Designer (see long text)
Message no. FPUIFB086
Diagnosis
The forms design tool for developing the form layout could not be started; either it is not installed or there are errors in the installation.
Procedure
Make sure that you have the forms design tool installed on your desktop (the tool is part of the SAPGUI installation).

Hi Kodandarami Reddy.S ,
Which web site did you downlad the adobe lifecycle v8.0 ? I have to install this program to make a adobe forms.
Regards
recoba561161

Error: Could not start Layout Designer

When I click the LAYOUT tab in the form design, I get this error and exits.
When I read the help, it says that I need to install some form designer with gui. how do i do that and where can i get that?
Thanks
Kiran

Check =>https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30a9630b-4f89-2a10-6fab-e311b3ffd9a6
Also /people/scott.jones/blog/2007/09/13/installing-and-configuring-sap-interactive-forms-by-adobe-for-the-sap-netweaver-composition-environment
Check OSS:965548,816065,1121176,1176858...Many More.

Cyrillic data in Adobe Form could not display in WD Application .

Hi All,
I use Adobe Interactive Form Object in WD Application so as to display data in Cyrillic Language for printing.
I have the problem that in the PDF i cannot display the Cyrillic data ( Bulgarian, Romanian...) but only EN .
I dont have any problem running my adobe print form from R3 report program.
Please , i will appreaciate any help.
Regards,
Ari

Hi Thomas & Amit ,
Thank you very much for your help.
Tomorrow i will check your advices.
Thomas how could i check the Adobe Plugin?
I have problem only when i run adobe in WebDynpro abap view. I use the standart Interactive Form Object. When i run it inside sap (no in the web application) i have no any problem.
You think there is any font problem with the Cyrillic Languages ?
Amit i will check you solution and will replay.
I appreciate your help.

Workflow could not start in HCM process and Forms

Hi All
It would be really helpful if you can suggest possible solution regarding case management case in HCM forms and process.
I have set up a simple custom HCM process and Form regarding Infotype 2 updation. I have checked the process and form consistency and it seems fine. Now when I run the process from HRASR_DT it generates a process number but it also gives an error workflow could not start.I get following error (SWIA log - Step history)
Executing flow work item - Transaction brackets of the workflow has been damaged
Exception occurred - Error when starting work item 000000007031
PROCESS_NODE - Error when processing node '0000000014' (ParForEach index 000000)
CREATE - Error when creating a component of type 'Step'
CREATE_WIM_HANDLE - Error when creating a work item
CREATE_VIA_WFM - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event CREATED and (target) status
EVENT_RAISED - Error updating the process object
Executing flow work item - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY->ERROR
EVENT_RAISED - Error updating the process object
Executing flow work item - Transaction brackets of the workflow has been damaged
Executing flow work item - Work item 000000007031: Object FLOWITEM method EXECUTE cannot be executed
Executing flow work item - Error when processing node '0000000014' (ParForEach index 000000)
I have searched few SAP notes such as 1384961 which talks about same error but it is implemented in our system (EA-HR 604 , Patch 27, )
Appreciate any help.
Thanks
Umang

Hi Swati
One of the similar (not exact) issues were resolved by correcting the event linkage....please refer thread:
http://scn.sap.com/message/14848795#14848795
Not sure of the details of the the resolution, maybe Ragavendran Kanagaraj can throw more light.
Just some high level checks (if not done already):
Check event linkage errors in SWEQADM if anything is related to your WF
Check in SWEL if it's showing any more details (not sure if it will)
Any warnings in syntax check of WF template (PFTC) or WF definition (SWDD)
Any error sin binding
regards,
Modak

CS2 The Adobe Updater could not be started...

After installing CS2 on my new Vista computer when I start Photoshop I get the message "The Adobe Updater could not be started, please reinstall application and components."
Knowledgebase ID 331634 offers solutions for Windows 2000 and XT, but not for Vista.
Anybody here got a clue?
ken

its working fine on mine side u can find that file here C:\Documents and Settings\All Users\Application Data\Adobe\Updater file name = AdobeESDGlobalApps data in file = <?xml version="1.0" encoding="UTF-8" ?> <AdobeUpdaterRegistrationManager> <Application appID="photoshop9-en_US-RET"> <DisplayName>Adobe Photoshop CS2</DisplayName> <InstallPath>C:\Program Files\Adobe\Adobe Photoshop CS2\</InstallPath> <PreAppPath></PreAppPath> <PreAppParams></PreAppParams> <PostAppPath></PostAppPath> <PostAppParams></PostAppParams> ________________________________________ <IsEnabled>1</IsEnabled> <<<<< THIS IS LINE TO EDIT CHANGE 1 TO 0<<<<<<<< _______________________________________________ </Application> </AdobeUpdaterRegistrationManager> save the file enjoy naeem www.tec-forum.co.cc

My computer had to be wiped clean and I had to reinstall my Photoshop Elements 5. I keep getting this message: The Adobe Updater could not be started. Please reinstall the application and components.

My computer had to be wiped clean and I had to reinstall my Photoshop Elements 5. I keep getting this message: The Adobe Updater could not be started. Please reinstall the application and components.
I need to take care of this. I have reinstalled it 3 times and still get the same message.
Any suggestions?

Firefox is trying to update but it can't because Firefox is running
Open the task manager with Ctrl + Alt + delete. Click on the Processes tab and find firefox.exe. Click End process

Could not start the Oracle Forms Server

I am using Windows 2000 Professional
The Oracle Forms Server [Forms60Server] service failed to start due to the following error:
Access is denied.
Event ID: 7000
Source: Service Control Manager
Description: Could not start the Oracle Forms Server [Form60Server] service on a Local Computer.
Error 0005: Access is Denied

Description:
I Installed Oracle Forms6i and when i tried to run web test form I got this :
Event Type: Information
Event Source: Application Popup
Event Category: None
Event ID: 26
Description:
Application popup: ifcgi60.exe - Unable To Locate DLL : The dynamic link library D2LA60.dll could not be found in the specified path C:\orant\tools\web60\cgi;.;C:\WINNT\System32;C:\WINNT\system;C:\WINNT;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem.
this missed file already exist in <Oracle Home>\Bin
directory, and if I copied it to the asked destination
it asks for more CORE40.dll and NLSRTL33.dll
and then those also copied then the screen disappears
Question : Why did this error occur, what went wrong
and how do I fix this problem
2)the other question is in Forms9iDS Version 9.0.2.7.0 I am getting this error
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7000
Description:
The OracleOraHome9iAgent service failed to start due to the following error:
Access is denied.
FRM-92060 :Failed to connect to the server
Bad machine specification :/forms90/190servlet:-1
Any Suggestion will be appreciated

Adobe AIR could not be installed because another application is already being installed

OS Windows XP
If I try to start a new setup I receive the following message:
"Adobe AIR could not be installed because another application is already being installed. Complete the first installation before proceeding with this one."
This is the messagge when I try to remove Adobe Air 1.0 from Control panel:
"Another installation is already in progress. Complete that installation before proceeding with this install."
This is the log file:
[2011-04-08:19:59:21] Runtime Installer begin with version 2.6.0.19120 on Windows XP x86
[2011-04-08:19:59:21] Commandline is:
[2011-04-08:19:59:21] No installed runtime detected
[2011-04-08:19:59:23] Starting runtime install. Installing runtime version 2.6.0.19120
[2011-04-08:19:59:24] Installing msi at d:\docume~1\carlo~1.zan\locals~1\temp\air78.tmp\setup.msi with guid {AFF7E080-1974-45BF-9310-10DE1A1F5ED0}
[2011-04-08:19:59:27] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1618" errorID=5008]
[2011-04-08:19:59:27] Rolling back install of d:\docume~1\carlo~1.zan\locals~1\temp\air78.tmp\setup.msi
[2011-04-08:19:59:27] Rollback complete
[2011-04-08:19:59:27] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1618" errorID=5008]
[2011-04-08:19:59:28] Runtime Installer end with exit code 7
In the past I had problems with a virus and I removed some voices on regedit. I think I've combined some mistake.

Hi,
I'm sorry you're having problems installing/uninstalling air. Have you tried rebooting to see if that resolves the issue?
If it still fails, can you enable MSI logging using the instructions found on the following page and then post the msi log contents for review?
How to enable Windows Installer logging
Thanks,
Chris

Adobe Reader could not open a pdf file - either not supported file type or file damaged

On March 5th, I started getting the Adobe Reader error message "Adobe Reader could not open a pdf file because it is either not supported file type or the file has been damaged.
I get this when I try to open the pdf file as an attachment in Outlook 2013 from my G-Mail account. If I save the attachment and then try to open the pdf document, I get the same error4.
I get this error message with every pdf file that now comes to me in Outlook.
If I log on to my G-Mail I am able to open the pdf document. If I also save the attachment to my computer, I do not get the error message when I open the pdf file. This would suggest the file is okay
This would lead me to believe the problem maybe with Outlook.
I'm using Adobe Reader XI v11.0.10
I'm using Windows 8.1
Is anyone encountering this same issue with outlook?

I copied it again. Do you see it? BTW, how do I set privacy? (I'm new at this)
I opened with two different notepads and got different information.here it is from Windows Notepad. First few lines are:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd
>
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<style type="text/css">td img {display: block;}</style>
</head>
Here it is from MS Notepad:
<HTML><HEAD><style>.ending {font-family: Calibri; font-size: 18px;}</style><BODY><TABLE><TR><TD colspan=100%><a href="http://www.trulynolen.com/questionnaire?l=14115468&o=141050070&z=85087-7515"><img src=http://newsletter.tnolen.com/email/service.png border=no></a></TD></TR><TR><TD align=center class="ending">If you would not like to receive email communication from Truly Nolen in the future, please <a href="http://newsletter.tnolen.com/unsubstart.asp?b=14115468&z=85087-7515&e=[email protected]/unsubstart.asp?b=14115468&z=85087-7515&e=[email protected]">click here</a></TD></TR></TABLE></BODY></HTML>

"Adobe Captivate could not detect a recording device ..."

Adobe Captivate shows my Snowflake USB microphone but doesn't record sound from it. When I choose Calibrate I get "Adobe Captivate could not detect a recording device". However, I can record from the microphone in all my other apps (Rosetta Stone, Sony SoundForge, etc.), so I know it's not a hardware issue.
When I go to "Sound" in Vista Pro's "Sound" option on control panel the Microphone is chosen as the default recording device, and I see the bars moving up and down when I talk.
What can I do to get "Captivate" to see the Mic?
A temporary workaround I found is to plug the Microphone into my laptop, then select SPDIF in as the input source. Captivate still gives the "... could not detect a recording device..." error, but the sound records anyway. This is kludgy, however.

Hi there
You may well just be out of luck. I heard Captivate 2 and Vista Pro used together. I don't believe Captivate was fully compliant with Vista until version 3. So that may explain things.
Unless someone pops in with a better idea, you should be able to record the audio separately, save as WAV or MP3 and import into your slides.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Why am I getting this error message......."Adobe Reader could not open 'SBA 413.pdf' because it is e

why am I getting this error message when I try to open a PDF file? Adobe Reader could not open 'SBA 413.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

It's difficult for anyone to say how to fix it. Try getting a new copy of it. Did you download it from a web site, as an email attachment, or something else?
I donwloaded that form from the SBA web site and it worked fine for me. It is an XFA form created in LiveCycle Designer, but those should work fine with the desktop versions of Adobe Reader. So try downloading it: http://www.sba.gov/sites/default/files/SBA%20413_0.pdf

Adobe Indesign could not complete the conversion

Hi!
I updated from CS6 to CC this fall, and today I'm trying to open several documents created in CS6 but with no luck Get this error meassage: "Adobe indesign could not complete the conversion because the data in the file did not match what was expected"
Do I have to install CS6 again to manage to open the file? Or what do I do? Hopefully the file isn't completely destroyed....
Hoping to get some help

Peter Kahrel has a batch conversion script at Free script Batch convert/export InDesign documents | Peter Kahrel that you can run to do the export on entire folders of documents at once. Run it in the old version.
But in my opinion, since you can have CS6 installed at the same time, there's really no reason to convert most of your files unless they are projects that are ongoing and get edited time after time, and even then probably not. Re-use of docs by doing a Save As to a new version for things like magazines is likely to eventually lead to document failure due to creeping minor corruption that at some point accumulates to the point of not being minor. We see a lot of reports of recycled files that suddenly don't work after 30 or 40 (or some other number) of generations. There is no excuse for not making templates for this sort of job and using the template to start each iteration.

Windows could not start DBConsole for new database instance

Hi,
I am getting this error "Windows could not start the OracleDBConsoleOracleInstance2 on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the system vendor, and refer to service-specific error code 1".
I installed Oracle 11g on Windows 7 and created my 1st database instance (oracleInstance1) successfully with a listener and service configured. I could access this database using DBconsole URL: https://hostname:1158/em.
I see the services started for:
OracleDBConsoleOracleInstance1
OracleOraDb11g_home1TNSListener
OracleServiceOracleInstance1
Next, I created a second database instance (oracleInstance2) and have configured a new service for this database. I am using the same listener as I intend to use one database instance at any point of time.
However, I got this warning message during configuration:
"Enterprise manager configuration succeeded with the following warning - Error starting Database Control. Please execute the following command(s).
1. Set the environment variable ORACLE_UNQNAME to Database unique name.
2. C:\Oracle\product\11.2.0\dbhome_1\bin\emctl.bat start dbconsole"
To start the new database console, I stopped the previously running DBConsole, OracleDBConsoleOracle1 and started the new DBConsole OracleDBConsoleOracle2 and get the above error.
When I try to start dbconsole manually using "emctl dbconsole start", it starts OracleDBConsoleOracle1 instead.
I changed environment variables ORACLE_SID=oracle2 and ORACLE_UNQNAME=oracle2
What am I missing here. Please help!
Thank you.

968952 wrote:
Hi,
I am getting this error "Windows could not start the OracleDBConsoleOracleInstance2 on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the system vendor, and refer to service-specific error code 1".
I installed Oracle 11g on Windows 7 and created my 1st database instance (oracleInstance1) successfully with a listener and service configured. I could access this database using DBconsole URL: https://hostname:1158/em.
I see the services started for:
OracleDBConsoleOracleInstance1
OracleOraDb11g_home1TNSListener
OracleServiceOracleInstance1
Next, I created a second database instance (oracleInstance2) and have configured a new service for this database. I am using the same listener as I intend to use one database instance at any point of time.
However, I got this warning message during configuration:
"Enterprise manager configuration succeeded with the following warning - Error starting Database Control. Please execute the following command(s).
1. Set the environment variable ORACLE_UNQNAME to Database unique name.
2. C:\Oracle\product\11.2.0\dbhome_1\bin\emctl.bat start dbconsole"
To start the new database console, I stopped the previously running DBConsole, OracleDBConsoleOracle1
Why?
and started the new DBConsole OracleDBConsoleOracle2 and get the above error.
When I try to start dbconsole manually using "emctl dbconsole start", it starts OracleDBConsoleOracle1 instead.
I changed environment variables ORACLE_SID=oracle2 and ORACLE_UNQNAME=oracle2
What am I missing here. Please help!First thing you are missing is showing us what you did. Instead you just described it, and that leaves a lot of room for questions. Copy and paste from a command prompt can work wonders here.
From a command prompt, enter the following:
set ORACLE_SID=oracle2
set ORACLE_UNQNAME=oracle2
set | sort
net start
emctl start dbconsolecopy the entire session, commands and full responses, and paste back here.
>
Thank you.Just to take a side road ...
"I am using the same listener as I intend to use one database instance at any point of time. "
Doesn't' matter if you use one instance or 100. The listener was DESIGNED to service multiple instances of multiple versions running from multiple homes. It is nothing but a connection broker. A telephone switchboard, if you will. All you need is a single listener, with the default name of LISTENER, running on the default port of 1521. It will handle all the database instances you care to throw at it. More instances than anyone in their right mind would ever put on a single server. Your server will run out of capacity to host additional instances before the listener runs out of capacity to service them. Especially since your 'server' is really just a toy in the Oracle world.

Adobe Form: Could not start Layout Designer (see long text) - FPUIFB 086

Similar Messages

Maybe you are looking for