Adobe form data not being retrieved by Web Dynpro application
Hi,
I have created an online interactive Adobe form embedded in a Web Dynpro ABAP application. The Web Dynpro application calls a function module to update data in SAP. My problem is that the ABAP code that was generated to retrieve the data from the Adobe form and call the function module does not retrieve the data if it has been typed into any of the input fields. Oddly enough, it does work if the data is entered by using the value helps that have been placed on the form.
I would appreciate any suggestions.
Thanks!
Russell
Use messageboxes on various events to find out when your value dissapeears.
If you´re not sure about the binding, you can always drag/drop from data view tab onto the layout and check the binding which the system generates for you. Just to make sure.
Regards Otto
Similar Messages
-
Exception not caught while executing web dynpro application
Hello all,
I'm getting run time error exception CX_WDR_RR_EXCEPTION not caught when running web dynpro application
The error analysis shows the custom component is locked by the user and cannot be regenerated. But I checked in SM12 for locked entries and component was not listed there.
The program terminated in the include LWDR_RUNTIME_REPOSITORYF12
Please suggest how to resolve the isse?
Regards,
anilsorry...posted in wrong forum...
-
FPM Form Scripting - How to call a web dynpro application as pop up
Hi All,
I want to call a web dynpro application as a pop up from FPM form scripting.
Like click on button -Maintain Approval Routing in a FPM form i want to open a web dynpro pop up..
Thanks In Advance.Refer to the post How to show pop up’s in WDA HCMPF by Yugandhar Reddy - on some hints
Hope this helps.
Regards,
Sahir. -
Not able to run web dynpro application from portal.
Hi portal experts,
I want to run my web dynpro application from portal.
So created a seperate iview and a role for the purpose.
Assigned the iview to the role and also mapped a abap user id to the new role created.
But when I click on 'preview' the iview , getting the following dump.
Error when processing your request
What has happened?
The URL http://mnghcmsap:8000/sap/bc/webdynpro/sap/zhr_cp_admin/ was not called due to an error.
Note
The following error text was processed in the system HRM : Die URL enthält keine vollständige Domainangabe (mnghcmsap statt mnghcmsap.<domain>.<ext>).
The error occurred on the application server mnghcmsap_HRM_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: STARTUP_CHECKS of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system HRM in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server mnghcmsap_HRM_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server mnghcmsap_HRM_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 200 -u: INF51515 -l: E -s: HRM -i: mnghcmsap_HRM_00 -w: 0 -d: 20110209 -t: 121224 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Please let me know if I am doing the process correctly and also let me know if I am missing somthing.
Thanks,
Aditya.Are you able to run teh web dynpro application independtly i.e. without creatin an iview.
http://mnghcmsap:8000/sap/bc/webdynpro/sap/zhr_cp_admin/ by using this link.
or there also you are getting the error.
i guess there also you should be gettign the error.
this is some problem with the FQDN settings in the abap system.
in the host name of the web dynpro applciation server one .(dot) is must.
so you might have to change the host name to some thing like mnghcmsap. from mnghcmsap
thanks
sarbjeet singh -
Field With No Data Not Being Retrieved
I have a Crystal Reports that is not retrieving the correct data. The fields has
a value of "POST" or nothing in the field. When I code the "Selection Formulas"
for "Record" (i.e equal to "POST") I get the correct number of records, but when I
reverse the logic (i.e not equal to "POST"), I receive no records at all. I
changed the "Report Options" to "Convert Database NULL Values to Default" and
"Convert Other Null Values to Default" (with both, one or no boxes checked), I
get the same results. I also changed "Options" ("Null Treatment") for
"Exceptions For Nulls" and also tried "Default Values For Nulls". What must I do to
retrieve these records that nothing in the "" fileld ? Sample code is
below. Thanks ! ! !
Gives Correct Data
in {?Withdrawn Date}
And = "POST"
Does Not Give Correct Data
in {?Withdrawn Date}
And NE "POST"
Edited by: Lenell Hooker on Mar 24, 2010 7:09 PMhi,
in {?Withdrawn Date}
And
if isnull( ) then TRUE
else
<> "POST"
Please try it. It will work.
Regards,
Vamsee -
Uncaught exception while executing web dynpro application
Hello all,
I'm getting run time error exception CX_WDR_RR_EXCEPTION not caught when running web dynpro application
The error analysis shows the custom component is locked by the user and cannot be regenerated. But I checked in SM12 for locked entries and component was not listed there.
The program terminated in the include LWDR_RUNTIME_REPOSITORYF12
Please suggest how to resolve the isse?
Regards,
anilHi Anil,
I'm also getting the same run time error. When I try to activate the Web Dynpro component, I'm getting error that the component is locked by the user.
Please let me know how you solved this issue.
Thanks in advance for the quick response.
Thanks & Regards,
Jay -
Uncaught exception when executing web dynpro application
Hello all,
I'm getting run time error exception CX_WDR_RR_EXCEPTION not caught when running web dynpro application
The error analysis shows the custom component is locked by the user and cannot be regenerated. But I checked in SM12 for locked entries and component was not listed there.
The program terminated in the include LWDR_RUNTIME_REPOSITORYF12
Please suggest how to resolve the isse?
Regards,
anilDear Anil,
What type of WD is it ?
Do you get the error when you trigger some sort of event ?
Is it when first launch the WD ?
Can you be more specific and share with us the code where this is dumping ?
You can also check this link
[CX_WDR_RT_EXCEPTION' - How to catch it?;
Kind Regards
/Ricardo Quintas -
When a user fills up a PCR Adobe Form from the portal where does the data or information is stored?
There should be a fundamental way that SAP stores Adobe form data. I want to understand how and where this data is placed in SAP prior to it updating the employees infotypes so I can retrieve it and report on SAP and non-SAP fields.
Same concept as in interface: data is sent from a file to SAP to update the back end. The file is stored separately from the back end up date data so it can be referenced later for support or other requirements. Same for the Adobe form data it needs to be maintained the same way for future reference and current reporting.Well take the case of adobe forms based on web dynpro technology. Here the data is stored in context which are bean like structures and can store and transfer data to any system.
Thanks,
Harish -
Adobe form output not getting displayed for the whole length of the page
Hi All,
I have developed an adobe form using webdynpro application. While testing, the output(pdf) does not occupy the entire page/screen from end-user side. But when I test the same from my side, the output appears fine . Could anyone suggest me on this?
Regards,
Allwin.Did you check the resolution at end user side? Is it different from your resolution?
To overcome this check what is the height and width you have specified for InteractiveFormUI element in your Web Dynpro application. Have you specified in pixels like 300px? You need to enter it as 100% for both.
Chintan -
Adobe Forms Date Format DD.MM.YYYY.
Hi Experts,
I am new to Adobe Forms(Transaction SFP) . The Client has requirement to display the data in DD.MM.YYYY format.
I saw that the standard 'Date fields' in ADOBE forms does not have this format.
Any Ideas.
Thanks.Hi
Drag and drop the Date/Time Field from Library pallet into Layout. Right click on it -> Go to Palletes -> select Object -> go to the Field tab ->
In Display Pattern you simply specify the date format as DD.MM.YYYY and the active it and test it.
Try this once. It will work.
Thanks
Sriiiiiiiii(Srikanth) -
Adobe form data refresh on new action
I have a table where the first column has a data field with a link to an action, the action calls a method to execute a model and then displays a new view with an InteractiveForm to display the data for the selected field. So, select an employee in the table, model is executed, Adobe form is displayed to show the data for that employee. The manager can then click a back button to go back and select a new employee from the table and then display the Adobe form for the new employee. This all works great the 1st time, but when I go back and select a new employee the Adobe form still displays the data for the 1st employee. I have added fields mapped to the context values to verify that the data is changing each time I select a new employee, but the Adobe form does not get updated. This seems too easy, what am I missing to clear my Adobe form and populate the new data the next time in?
Thanks for any guidance.
Jeff MathiesonHi,
just try to change the mode property of the interactive form element to " generatePdf" and check.
hope it helps you.
Rergards,
ramesh
Edited by: Ramesh Babu V on Aug 20, 2010 4:10 PM -
Is their way to prevent a form data from being lost when a validation fails
Is their way to prevent a form data from being lost when a validation fails?
So I would use APEX_COLLECTION (there is some information in APEX documentation).
Read all data you need to keep after submit and save them to your collection. Then, if validation fails, show report with data not from base, but from your collection. You have to create process, which creates collection, and you need to modify your report definition to get data not only from DB but also from collection.
If you have any questions feel free to ask.
Regards,
Przemek
Edited by: Przemek on 2009-01-10 17:47 -
Hi,
I developed a small gateway project(Getting PO text when PO number is passed). I created an Entity and an Entity set using a RFC to get the PO text.
I couldn't activate the service from SEGW transaction and could activated from /IWFND/MAINT_SERVICE. Now, when I try to test it by call browser I don't see any data is being picked up. I debug anf found that no Entityset is being retrieved during runtime and hence my RFC is not being called. Can you please help me on the possible reasons why the entityset is not being retrieved. Please share your suggestions.
My system settings:
GW_CORE
200
0003
IW_BEP
200
0006
IW_FND
250
0003
Regards,
Vikram.Hi Chandra,
Appreciate your immediate response.
Yes, I checked it putting a break-point and found that no entity set is being filled.
I don't see any mapping isses...Please let me know If am missing anything.
Regards,
Vikram -
Blank adobe form displayed in web dynpro application
Hi,
I have created an Interactive Adobe form using web dynpro Java. When I run the form (in IE), a blank page is displayed.
If I keep the Adobe reader open and run the form on IE, the form is opened in reader and it's working.
When I access the same form on a different system, there is no problem.
Does this have anything to do with the IE settings or Adobe Reader version/ updates.
I have checked the adobe reader version and it's the same on both the systems.
Version:
Adobe Reader Version : 8.1.2.
Adobe Designer 7.1
SAP NW 2004s - SP 15
Thank you,
VasuNot sure what the problem could be, here are some suggessionsu2026
Check whether you have enabled the option Display PDF in browser in the Adobe Reader.
I should be under: Edit > Preference > Internet
Also, in your Web Dynpro Application, try to set the u201CdisplayTypeu201D property of your Interactive form to ActiveX
Else, just try upgrading your Adobe Reader to latest version!
Hope this helps,
Harman -
Anti spam codes for website forms are not being accepted on my imac or iPad
anti spam codes for website forms are not being accepted on my imac or iPad
In Safari go to preferences click on privacy and on Block Cookies tick the never box
Maybe you are looking for
-
After the Airport update today, Airport Utility 6.0 no longer sees my new Extreme or my 2 new Airport Express relay stations (same network); however, my internet is working and all Airports are green? I'm running Lion on my iMac and updated when Air
-
Problem in using the enhancement SAPLV01Z for batch no assignement in MIGO
Hi, i am using the enhancement SAPLV01Z for using the user defined batch number. In which i am allowing the system to generate the internal batch number if it is newly created batch for that particular material,site and MRP combination.For this i am
-
My 1/8 notes don't play in Logic pro 9. How can i fix this?
Whenever I load a synth in sylenth1 or esp (etc.) all the notes just don't play and I get a wierd clicking noise For example pretend the capital letters are the ones heard and the non caps are the ones that make the clicking noise AAAAAAAABbbbbbbbCcc
-
< Moderator: Don't request documentation on these forums. Message locked. > Hi sap guru's, i want to configure lock box structure to my client, can any one send the sample configuration documents. Thanks in Advance Shankar
-
Opening an iMovie Clip with Windows media player
Is it possible to convert a clip created in iMovie to be opened in a PC (windows Media Player) Thanks