Adobe form display error
Hi All,
Can any one explain why i am getting this error and possible solutions for this error.
ADS: com.adobe.ProcessingException: com.adobe.Processin(200101)
Thanks.
Hi Hussain
It looks like issue with ADS configuration.
Please refer to below thread for the similar issue
ADS:com.adobe.Processing Exception:Could not retrive(200101)
ADS: com.adobe.ProcessingException: Problem accessing d(200101)
http://help.sap.com/saphelp_nw70/helpdata/en/97/ccfc3f0ac2c642e10000000a1550b0/content.htm
Search on SDN, there are lot of information for the similar issue
Hope it helps
Regards
Arun
Similar Messages
-
Values not capture during adobe form display on pa30.
Hi Experts,
I have attached Adobe Form into Transaction PA30 in which form values are not capturing during form display,
But its displaying at the time of form generation on ZHINUREQ_CORRS_LETTER program.
Kindly give suggestion.
Regards,
AbdulHi Saujanya,
This could by caused by the network, the used browser or additional browser plugins. Try to do the following:
1. Test with an alternative browser (if you are on a SP which supports different browsers than IE, see PAM, http://service.sap.com/pam): If it works with Firefox, then you know the problem is caused by IE and not by the OS, network, ...
2. Deactivate/uninstall all additional browser plugins/add-ons (like google toolbar, Yahoo toolbar, ...)
3. Create a client trace as explained in SAP note 999998. Maybe there's a hint in the trace. Watch for something like "ERROR".
4. Install a HTTP sniffer (like "fiddler") on both machines and compare the network traffic. Maybe there's a request with a 4xx HTTP status code?
5. How is the machine connected to your network? Is it behind an additional webproxy?
Hope one of this helps,
Ralf -
SAP Adobe form getting error when printing QRCODE
Dear experts,
In my program i called Adobe forms.
In the interface I pass below code
DATA: lv_nl TYPE string,
lv_n1 TYPE xstring,
lv_t1 TYPE xstring,
lv_tb TYPE string.
lv_n1 = '13'.
lv_t1 = '09'.
BREAK-POINT.
CALL FUNCTION 'CACS_CONVERT_HEX_TO_STRING'
EXPORTING
xstring = lv_n1 " <== Your value here
IMPORTING
cstring = lv_nl.
CALL FUNCTION 'CACS_CONVERT_HEX_TO_STRING'
EXPORTING
xstring = lv_t1 " <== Your value here
IMPORTING
cstring = lv_tb.
CONCATENATE gv_sc gv_po1 gv_pa1 lv_nl gv_in1 lv_tb gv_exdat.
I am getting an error
Exception SYSTEM_ERROR
Message ID: FPRUNX Message number: 001
Message:
ADS: com.adobe.ProcessingException: com.adobe.Processin(200101)
Kindly check and suggest me .
GopiHi Gopi,
Looks like your ADS service is down. Contact your Basis Team.
Run program FP_TEST_03 to verify the ADS service.
Refer to thread
http://scn.sap.com/thread/224489
Regards
Sandy -
Adobe Form output error in Webdypro
Hi Experts,
I created an adobe form using webdynpro.While executing i am getting an error:
"WebDynpro Exception: ADS call failed ADS: com.adobe.ProcessingException: com.adobe.ProcessingException: Could not retrieve a password for credential: ReaderRights(200,101). "
Please help me to solve this issue.
Regards,
Arun.Am not sure that one.
Adobe Reader (>= 7.0) must be installed on your local computer (see SAP Note 834573)
check this link
http://help.sap.com/saphelp_nw70/helpdata/en/45/2fbd67361003c3e10000000a1553f6/content.htm
http://www.sdn.sap.com/irj/sdn/adobe
and contact ur basis. dont get bolts on urs.
regards
Srinivas
Edited by: sanasrinivas on Oct 3, 2011 7:33 AM -
Blank adobe form displayed in web dynpro application
Hi,
I have created an Interactive Adobe form using web dynpro Java. When I run the form (in IE), a blank page is displayed.
If I keep the Adobe reader open and run the form on IE, the form is opened in reader and it's working.
When I access the same form on a different system, there is no problem.
Does this have anything to do with the IE settings or Adobe Reader version/ updates.
I have checked the adobe reader version and it's the same on both the systems.
Version:
Adobe Reader Version : 8.1.2.
Adobe Designer 7.1
SAP NW 2004s - SP 15
Thank you,
VasuNot sure what the problem could be, here are some suggessionsu2026
Check whether you have enabled the option Display PDF in browser in the Adobe Reader.
I should be under: Edit > Preference > Internet
Also, in your Web Dynpro Application, try to set the u201CdisplayTypeu201D property of your Interactive form to ActiveX
Else, just try upgrading your Adobe Reader to latest version!
Hope this helps,
Harman -
Adobe form layout error and Webdynrpo IE throwing error
Hi ,
If the user logu2019s into the network using Citrix ICA Client to access the server. He is able to access the remote server but if he tries to view the IE( internet Explorer ) of webdynpro application or layout of adobe form he gets the error in both cases u2026
Could any one explain what could be the problem?
Is it related to some port access or
Is it related to some permission that has to be included with the VPN .
Note : I am using VPN to access the serverHi Vini ,
I am not using IE 7.0 v ... I am using IE 6 ...
Can you think other reason apart from the developer side ....
Can it be a configuration issue ........
Configuration - not of the SAP gui but the server which i am accessing .. Is it allowing me to have web application or we certain setting from which you can block the person to execute the web application ....
Please let me know if you can ....
Thanks ,
Om -
Web dynpro Adobe Form Display In Portal
Hi,
I have a Web dynpro Abap application which triggers a adobe form, which is displayed fine when previwed from Web dynpro Abap, but the same application when inegrated in portal it is not displaying the adobe form in portal.
Any help would be greatly appreciated.
Thanks in advance.
Regards
G SurajHi Suraj,
As you have written that you are using ADOBE Form, So you check with your Portal Admin that
ADS services are configured in Portal or not ??
Regards,
Piyush -
Adobe form displaying data of previous selected records
Dear All,
I have created a wd component consisting of 2 views.
In the first view i am displaying an ALV. When i select a record and click on the alv button, the second view
gets called which contains an Adobe Form showing the data.
The problem i am facing is that the record which gets displayed in the adobe form is the one previous selected record and not the current record which i select.
Kindly give your valuable suggestions .
Regards,
NitiHi ,
Adobe form is just an external media in your case , it has nothing to do with your data.
Check what data is getting passed to adobe form via debuging .
check if your getting the selected element .
You can also post your code here if possible.
Regards
Kuldeep -
Adobe Form Translation error Omitted Objects (Could not be Converted)
Hi,
I am new to this forum. I have an issue with Adobe form Translation. Through SE63 (or through the form translation itself) , whenever I try to translate into any language it gives me an error " Omitted Objects (Could not be Converted)". And the translation doesnt get saved. I tested with other forms and the translation works perfectly fine. Its the problem only with this particular form. In fact any change gives error. For e.g. I copy the English the translation to the Greek or the Hungarian one, and if I delete a character and save it it gives me an error.
Please help me if you have faced similar issues have any knowledge about it.
Thanks in advance
ShivamHi David,
Thanks for answering my query. I had installed a new patch and even that did not work. However I managed to make it work. I dont know if its the correct way but it worked for me. On furthur analyses I found out that the problem was with XML tags. This was throwing an error. Also, on looking at the translations I Observed that there were few close tags "</trans-unit> " which had no open "<trans-unit>" for them. I simply deleted the extra close tags and the translation worked fine after that.
Point to be noted is that the extra tags were not there in the original english translation. They only appeared when I tried to change the Greek or Hungarian translation and saved them.
Hope it helps anybody.
Thanks. -
Hi Experts,
I have developed an invoice(adobe forms) in my development server and translated this invoice for FRENCH(F) and moved this request to Quality server and now i am trying to translate the same form for GERMANY(DE) in dev server, i am getting a message when i am saving the object "Omitted Objects (Could not be Converted):" and the text are not changed (which means english text remains not changed while translating into DE)
i hope it is not related to SAP Logon GUI problem, because i developed a sample form and i tested it for some languages(while translating, it has not pgiven any error message like "Omitted Objects (Could not be Converted):". am using SAP 710 release and patch 14)
Please help me to solve this problem
Thanks and regards
Vijayendran.RHI Priya,
Thank you, i ahve implemented the same..
it is working fine..
Thanks & Regards
Vijayendran.R -
Standard adobe form workflow error
Hey Expert,
I am using the standard workflow template WS17900260 for any adobe form. In this task there is a task which is TS17900108. I have some workflow that end in error because of this task raising an exception "Exception CX_SY_NO_HANDLER trigger.... An exception with the type CX_HRASR00_PROCESS_MODELLING occurred but was neither handled.
I have tested the workflow with the same set of data and the wierd thing is only some of the workflow end in error.
Anyone have any idea?
Thanks
Regards,
BryanHi Brian,
I am not sure , but would just try to give you pointers:
1. Techncial reason for workflow going to runtime error is, at this step in workflow, if there is an exception raised, it is not modelled in workflow.
2. This exception may be raise dif scenario, steps or process realted data is not available during processing of the task.
3. Authorization for specific activity is absent.
Regards,
Akshay -
Hi
We are working on PCR forms in MSS and having some issues with certain forms.
I am UNABLE to select any option in the PCR Adobe form's DROPDOWN LIST
BOX and any Adobe form which has a dropdown list comes up with an error
message "message limit exceeded. Remaining n errors not reported" when 'n' could be any number.
We are on EP 7, ECC6.0 (NW2004s) and Adobe Reader 7.0.8
I tried this with and without the xACF component, still having the same issue.
Any recommendations on how to solve this?
Thanks
Regards
MichaelHello Michael,
All the PCR forms are ZCI ased forms. Hence, working with or without ACF does not make a difference. Most probably, you are missing the dynamic mapping for the DDLs. Please open the form in the designer and select the DDL. Under the "Object" > "Binding" tab, click on the "Specify Item Values" link. This will popup a "Dynamic Properties" window. Could you please tell me what do you see there ? If you have not changed this dynamic property you will see the following entry: "$record.sap-vhlist.<b>REPLACE_THIS</b>.item[*]". You need to replace the "REPLACE_THIS" portion with the appropriate context structure here for the DDL under consideration. For example, if you have a context structure as follows:
[code]Context
DDLData (dataSource node)
ValueHelpDDL (attribute of type String mapped to DDL)[/code]
Your SOM expression should look like:
[code]$record.sap-vhlist.ValueHelpDDL.item[*][/code]
Now, let us take a more complex context structure:
[code]
Context
DDLData (dataSource node)
MyDDLData (internal node)
DDLDataItems (one more internal node)
ValueHelpDDL(attribute of type String mapped to DDL)
[/code]
In the above case your dynamic binding should be as follows:
[code]
$record.sap-vhlist.MyDDLData\.DDLDataItems\.ValueHelpDDL.item[*]
[/code]
Notice how the "<b>\.</b>"s are inserted in between to separate the context structure. Make sure that the node names are correct. When the changes are done, please redeploy the application and try again.
Note: Please do not change anything inside the "DO NOT MODIFY" section. If you think that there is a bug or a problem with the code, please report it to SAP immediately. That way we can avoid any potential conflict.
Best Regards,
Krish -
Adobe forms: Displaying work area data in different windows
Hi,
I have a requirement of showing work area data in different windows i.e work area which has sent from program needs to come in different windows of the form. I have created a smartform which will perfectly doing the above logic. The above work area also contains amount fields. I am also passing language 'English' or 'French', based on this i am displaying some texts also.
But Client wants to see the same requirement in Adobe forms. Ao i am new to Adobe forms, I need some help for performing the above scenario. I am doing my research on this. But i want to know the steps which will not reduce the performance.
In smartform, first window contains personnel no from work area and the second window contains address from work area. Then i have created a template with employee premium amount column, company premium amount column and total of that, all these from work area. So work area will contain only one row which i have to show in different window and on template.
In Adobe forms, How can i do the same this which i have done in smart forms.
Please suggest me any one in doing this. I appreciate your answers.
Thanks,
s.vikgneshHi,
Yes as Santoosh said there is no such wiondow option in Adobe forms.
But if you use webdynpro java/Abap we can acheive this.
think something like this below, if it works.
have 2 views 1st for the adobe form, 2nd view in a new window for the work area screen.
in the adobe view have a button for the work area and respective event handler.
in the event handler call this window, and then reload the same adobe form.
if from the work area form if you need value to be passed to this adobe form. have a event handler for this.
when purpose is done, close that window and set value to the required context field on the form. and reload that adobe form.
this is a fuzzy process and time consuming, unless business has no other option we dont go this approach.
but for sure this works, we did the same for a EHS process.
Cheers,
Sai -
Dear All,
iam new to new Adobe forms
when iam trying to execute through transaction SFP
iam getting this following error :System error message FNAUX
please help in this regardsHi,
i got exactly the same error after installing nw2004s SP07 sneak preview.
I checked oss note for changing the hostname - without success.
But now i found the reason. I missed to configure the : "Destination URL for the Adobe Document Services" as described here:
http://help.sap.com/saphelp_nw2004s/helpdata/en/02/560f41ca73d349e10000000a1550b0/frameset.htm
Hope this helps.
Regards
Matthias -
Adobe Forms work fine in the development system. However in the quality system while testing it is aborting with a USAGE ERROR. All these jobs for printing are background jobs.I have used FP_JOB_OPEN, form function call and FP_JOB_CLOSE in the correct order. Are there any other things that have to be handled in the program/system ?
first of all make sure the ADS is working well for the test system (the connection in SM59 or something else could be wrong).
if you´re sure ADS is ok for the system, start working with the form. In my opinion the problem is with an unexpected value coming into a field. Like a character coming into a datetime field or something like that.
Debug the form (and/or use ADS trace) and check the values. Maybe you will find something that does not make sense.
Cheers Otto
Maybe you are looking for
-
2 filter conditions in one column in one report
I want to filter a column with value x and then the same column with value y in one single report in OBI11.1.7.Is this possible? I appreciate your answer.
-
RAW support for Canon PowerShot SX1
Hi All, In the absence of Apple support for the Powershot SX1 IS any suggestions on how to work with this camera easily in a workflow shooting RAW? I have seen a few archived posts with some suggestions such as the Adobe DNG converter but unfortunate
-
I cannot access facebook on my MacBook Pro. I am able to access every other website. When trying to access facebook it says that page cannot be displayed as safari cannot establish a connection. I was able to access it just fine few weeks ago....
-
Result recording(QM) - Status check error
Hi Friends, I can not perform Result recording(QE01) due to "status Check Error". Inspection lot was created through GR. And then i tried to do Result recording. But i am getting error "status check error-This function you selected cannotbe carried o
-
Download BW Query results in HTML format
On a daily basis, I need to get BW query results exported to an HTML extract file on the BW server. The HTML file will then be transferred to a Windows server for use in a dashboard view by a third party developed portal. The query has an input var