Adobe form -- Issue in Displaying Dynamic text along with Static text

Hi All,
I am having an issue when i am displaying a dynamic text along with static text in adobeforms.
The dynamic text is slightly coming down and not aligned with the static text. i can see half row it is coming down.
how to align both texts to be printed in same format.
Request all of your expert advices in achieving this .
Thank you in advance.
Thanks&Regards,
Phani Miriyaila.

Hi,
Select both dynamic and static text in the layout. Goto Object palette -> Layout. Give values to X,Y coordinates and Height & Width. Anchor properly and specify margins as well.
Select both dynamic and static text in the layout. Right click on it and goto palettes -> Paragraph. It gives you the text alignment options. Align the text and give similar font and size.
Thanks & Regards,
Sanoosh

Similar Messages

  • How to add long text for existing static text in Adobe forms.

    Hi all,
    I have a requirement that I need to add  a long text for existing Static text in my adobe form
    1) Counter part inputs
    2) Mack Inputs.
    These two are static texts, I need to add the long text in the following manner.
    1)Counter Part Inputs(zds220)
    2)mack Inouts(zds340)
    Please suggest me how to do it.
    Thank You.
    Suneel.

    Hi Nitin Sikka,
    Thanks for your reply. I found solution for the above issue. I need to change the text to text field and  binding to that text field.
    Thank You,
    Suneel.

  • How do you copy and paste track changes material in Pages from one point in a document to another and keep both the old text along with the track changed thus far in the new pasted location?

    Depending on whether track changes is on/paused, Pages thinks the pasted material is either all new and thus highlights it as a big track change or just copies the old material along with the edits as plain text so that I cannot see my track changes. I need to be able to copy and paste in the same document and still be able to see the older text along with the changes to certain sections thus far. Is this possible? I need a step-by-step "talk to me like I'm five" instructional if what I would like can be done.
    Thanks for any help!
    Message was edited by: C.M.W.

    What version of Pages?
    What OS, iOS or OSX?
    Are you sure you have the Table selected and not a cell or just contents?
    Peter

  • Display text w/i Static Text Field

    Running SJSC2.1 on XP
    How can I get the text within a static text field to display on multiple lines.
    It works within a text area field - using "\n" but not a static text field. The text is fed from a database (Derby/Oracle)??
    Thanks...

    I have inserted: escape="false" as here:
    <ui:tableColumn binding="#{Page1.tableColumn3}" headerText="Info" id="tableColumn3">
    <ui:staticText binding="#{Page1.staticText5}" escape="false" id="staticText5" text="#{currentRow.value['CONTACT.CINFO']}"/>
    There is no option in properties for table cells (static text)
    Still the text is one long string..
    However, looking at the source code after deployment shows newlines where they should be. Go Figure!
    Could certainly use some help here..
    Thanks

  • How to Embed a Text Frame Within a Text Frame with Smart Text Reflow

    This is driving me nuts, and I've wasted hours searching exhaustively but can't seem to find the answer.
    I've been working with this indesign file and cleaning it up really well.  I now have all the text flowing with smart text reflow.  There are two parts in the book that have columns of information, or tables.  The way it was originally done was having a text box placed inside the text box.  But unfortunately, whenever you add pages before or after, the text box won't follow with the text box it is inside.  I have tried grouping the two text boxes together, but this doesn't seem to work with Smart Text Reflow (since every page is based on the primary master). How do you embed a text frame inside another text frame that is based off the primary master?  I guess it would be like using the text frame as an object. 
    I included an image to help my explanation.
    I even tried adding columns and then spannign the header part across, but this still doesn't flow with the rest of the text.

    ANchor it into the other text fram, look in the help file. Keyword = Anchored Objects.

  • Adobe forms-multiple pages display problem

    Hi All,
      I had a query regarding the display of multiple pages in adobe 5.5 version.
    I had data which suits in more than one page in adobe.But its displaying only the data in the first page.And it is displaying the empty second page also,but with no data.So any suggestions to solve this issue???

    Hi,
    version  5.5.1.280? It is version of Adobe Reader? If yes then you can't use this version for viewing of adobe forms (note 834573 - SAP Interactive Forms by Adobe: Acrobat/Reader version).
    Another suggestion: Is subform of your first Body Page flowed (tab Object->Subform, propertie Content)? If not then content of this Body Page can't dynamically grow.
    Check subforms of your Body Pages, especially tab Object->Pagination.
    Regards
    Michal

  • Adobe forms issue with signature pads

    Hi everyone,
    I am new to and just joined  this forum as I never had to until this point. I am having some strange issue with adobe forms and using signature pad.
    I have a form built using adobe X. I am using Topaz signature pad to have a digital signature in my form. My application (which was built on Progress 4GL) opens up this form using rich text editor. Most of my clients remote login to use the application. Every now and then my clients complain that whenever they click on the signature field on the form to open up the signature pad window, it kicks them out of the whole application. This happens so randomly that they can't predict when it occurs. I logged each and every lines on my code to see if there's any issue with the codes but they all execute fine. And I can't log after the form is open as adobe takes the control and they handle the  communication with signaute pad. So far I have checked if there's any memory leakage that would kick me out and it's fine. And I think there's no driver issue as this happens randomly. A client who gets kicked out 1st time if tries the 2nd or 3 rd time following the same steps and same form, can successfully gets the job done.
    Have any of you had faced similar issue. If you have any solutions or ideas that would be a great help to me.
    Thanks!!
    Him

    Updates: Just found out that this issue rises only to the clients using Wyse terminals. Has anyone had any issue using Adobe forms and Wyse terminals?

  • Adobe form issue in quality

    Hi,
       I have made few changes in HCM forms and processes mainly in the Adobe form script and in fieldname display (say changed from Emp Name to Employee Name in the form) but when I move the changes to quality to test it in portal, no changes are reflected.
    The changes are available in quality system. I am able to view the script and form changes in HRASR_DT forms in quality (backend SFP/ through HRASR_DT). But when I open the form in portal using Start Process it does not show the new changes whereas it is still showing some old form.
    I am not sure whether this is due to any buffer issue or not. When I import a new Transport Request to quality, it throws an ADS error when I try to open the form through "Start Process" in portal and the next time it opens form without new changes.
    Please help me !!!
    Thanks,
    Arunsri B.S

    Hi Christopher... Thank you so much for your reply. First of all thanks for all the blogs you have posted on HCM Processes and Forms...that's saving me till today and learnt a lot from your posts.
    1. Yes I too felt that it should have been caching issue and I have raised it to the basis team, but yet to get a reply.
    2. First thing is, I changed the script. I kept few pop up messages to test the script and then I removed it and transported again to quality, But still the pop up message were there even though there is no script. I checked in the xml source too and there is no script for pop up message.
    Then to make sure, whether this is any script issue or not, I changed field label and even that did not reflect in quality.
    Yes, I know this is pretty funny, we don't have test data in development, so we always do the changes in DEV and move to QA for testing.

  • ISR adobe form unable to display the drop down

    Hi,
    I need to create a F4 help for a field in adobe form created using ISR.
    I have used the ISR text edit - Value help , But when i run the adobe form using the SFP tcode the
    F4 help is not displayed.
    Please suggest the way to populate the the input field with the domain F4 value.
    What are the prerequiste to run a ISR ?
    Thanks,
    Deeplata

    Can i run the ISR form directly form SFP tcode?

  • Adobe Form not getting displayed on the portal

    Hi,
    From the MSS portal when I run the process, the associated adobe form(using HCM) doesn't get displayed on the portal. Initially the problem was with higher version of acrobat reader but now it is solved. Now I am not getting any error or warning but adobe form still not getting displayed.
    Please help.

    Later

  • Adobe form: Issue with BACK, CANCEL and EXIT buttons

    I am new to Adobe forms. I created a simple demo Adobe form and was able to print it successfully except a strange problem.
    Whenever I opt for print preview it shows me a blank page. On pressing enter it shows me the form, But now none of the BACK, EXIT, CANCEL buttons work. On pressing any of them I keep getting the print form.
    So the only way I can come out of it is /n.
    Can anyone please help with the reason for such an issue and how to get rid of it.
    Regards,
    Ashutosh

    Maybe you can tell us something more about the code you use to print your form. I think thatis the problem. Otto

  • Adobe form is not displayed via function module

    Hi to all,
    I have written a function module.
    Import parameter: ADOBEFORM_NAME type FPNAME.
    DATA: fm_name           TYPE rs38l_fnam,     
          fp_docparams      TYPE sfpdocparams,   
          fp_outputparams   TYPE sfpoutputparams.
    CALL FUNCTION 'FP_JOB_OPEN'                  
      CHANGING
        ie_outputparams = fp_outputparams
      EXCEPTIONS
        Cancel          = 1
        usage_error     = 2
        system_error    = 3
        internal_error  = 4
        OTHERS          = 5
    CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'          
      EXPORTING
        i_name     = ADOBEFORM_NAME
      IMPORTING
        e_funcname = fm_name.
    CALL FUNCTION fm_name
      EXPORTING
        /1bcdwb/docparams        = fp_docparams
       IMPORTING
        /1BCDWB/FORMOUTPUT       = fp_outputparams
      EXCEPTIONS
        usage_error           = 1
        system_error          = 2
        internal_error           = 3.
    CALL FUNCTION 'FP_JOB_CLOSE'
       IMPORTING
        E_RESULT             =
      EXCEPTIONS
        usage_error           = 1
        system_error          = 2
        internal_error        = 3
        OTHERS               = 4.
    it will execute LP01 , but didnt display adobe form.
    Please can any one tell me the problem in the code.
    I shall be thankful to you for this.
    Regards
    Pavneet Rana

    Thanks for Reply.
    Yes i have done it still there is no display of adobe from.
    DATA: fm_name           TYPE rs38l_fnam,
          fp_docparams      TYPE sfpdocparams,
          fp_outputparams   TYPE sfpoutputparams.
    fp_docparams-langu   = 'E'.
    fp_docparams-country = 'US'.
    fp_docparams-FILLABLE = 'X'.
    fp_outputparams-PREVIEW = 'X'.
    CALL FUNCTION 'FP_JOB_OPEN'
      CHANGING
        ie_outputparams       = FP_OUTPUTPARAMS
    EXCEPTIONS
       CANCEL                = 1
       USAGE_ERROR           = 2
       SYSTEM_ERROR          = 3
       INTERNAL_ERROR        = 4
    CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
      EXPORTING
        i_name                     = ADOBEFORM_NAME
    IMPORTING
       E_FUNCNAME                 = fm_name.
      E_INTERFACE_TYPE           = E_INTERFACE_TYPE
    CALL FUNCTION fm_name
      EXPORTING
        /1bcdwb/docparams        = fp_docparams
      IMPORTING
        /1BCDWB/FORMOUTPUT       = fp_outputparams
      EXCEPTIONS
        usage_error           = 1
        system_error          = 2
        internal_error           = 3.
    CALL FUNCTION 'FP_JOB_CLOSE'
       IMPORTING
        E_RESULT             =
      EXCEPTIONS
        usage_error           = 1
        system_error          = 2
        internal_error        = 3
        OTHERS               = 4.
    Please can any one tell me the solution for that.
    I shall be thankful to you for that.
    Regards
    Pavneet Rana

  • Adobe form issue

    hi all,
    i have a issue:
    in CS03 we give a print list of materials which is called painting list. its printed thru a script actually it is a copy of standard copy of adobe form. which was copied from adobe form to script and done development, now the issue is its printing only 1 page. its not printing rest of the pages. here the process of printing is kind of trickey,
    from sapscript only data is passed using some control characters, and in the adobe layout it prints form correctly, after giving the print option from co03 if i go to sp01 and see the preview the format is as follows:
    ^global caufvd_gstrp
    03.01.2009
    ^global caufvd_cy_sqnr
    0
    ^global caufvd_aufnr
    12345678
    ^global afpd_tab_kunnr
    001
    ^global afpd_tab_kdauf
    98563256
    ^global afpd_tab_kdpos
    10
    ^global caufvd_tab_matnr
    1234568922
    ^global caufvd_tab_maktx
    material
    ^global caufvd_tab_gamng
    1,0
    ^global caufvd_gstrp
    03.01.2009
    ^global caufvd_cy_sqnr
    0
    ^global caufvd_aufnr
    12345678
    ^global afpd_tab_kunnr
    001
    ^global afpd_tab_kdauf
    98563256
    ^global afpd_tab_kdpos
    20
    ^global caufvd_tab_matnr
    23565464
    ^global caufvd_tab_maktx
    material
    ^global caufvd_tab_gamng
    1,0
    and son on...
    and when i print this form i get print out in nice format as it should come. now the problem is if i have more than 1 page im unable to print rest of the pages.
    can anyone please help.
    thanks,
    anupama.

    hi,
    anyone please help. if this is not clear please let me know.
    thanks,
    anupama.

  • Adobe form Issue in transaction PR05

    Hi,
    We have a requirement to change the standard Adobe form "PTRV_EXPENSE_FORM" of transacation PR05. We need to hide the text 'Simulation' from the output. I could change the setting of 'Simulation' subform. But after activation the same appears again. Please suggest what is to be done.
    Any type of help would by highly appreciated.
    Thanks
    RK

    Somebody, Please throw light on this.

  • Adobe Form does not display "I am the placeholder control" displays instead

    We are trying to display an Adobe interactive form in IE browser.  Instead of the form, the message "I Am The Placeholder Control"  displays where the form should be.  Any thoughts on the cause of this??  Active X settings have been checked and the PC has been used to display Adobe Interactive forms before.

    Hey David,
    I am also in a similar boat. Having installed and configured the TrustCertificate, i still get a blank for where my sample form should be displayed.
    There are a number of things that need to be done for the Adobe document services to work.
    This weblog outlines some
    /people/achim.hauck/blog/2005/02/04/my-struggles-with-the-adobe-document-services-in-was640
    It is "My struggles with the Adobe Document Services in WAS6.40" by Achim Hauck.
    Hope it helps.
    Sumit.

Maybe you are looking for