Adobe form Issue in transaction PR05

Hi,
We have a requirement to change the standard Adobe form "PTRV_EXPENSE_FORM" of transacation PR05. We need to hide the text 'Simulation' from the output. I could change the setting of 'Simulation' subform. But after activation the same appears again. Please suggest what is to be done.
Any type of help would by highly appreciated.
Thanks
RK

Somebody, Please throw light on this.

Similar Messages

Adobe form as a transaction

hi all,
i would be obliged if i can get to know as to we can get the adobe form as a transaction!
thanks in advance
mithun

Hai mithun,
Just refer these links........
Dynamic Adobe form generation
Adobe Form assignment
Regards,
Srikanth.
Reward points if helpful.

Adobe form: Issue with BACK, CANCEL and EXIT buttons

I am new to Adobe forms. I created a simple demo Adobe form and was able to print it successfully except a strange problem.
Whenever I opt for print preview it shows me a blank page. On pressing enter it shows me the form, But now none of the BACK, EXIT, CANCEL buttons work. On pressing any of them I keep getting the print form.
So the only way I can come out of it is /n.
Can anyone please help with the reason for such an issue and how to get rid of it.
Regards,
Ashutosh

Maybe you can tell us something more about the code you use to print your form. I think thatis the problem. Otto

Adobe forms issue with signature pads

Hi everyone,
I am new to and just joined this forum as I never had to until this point. I am having some strange issue with adobe forms and using signature pad.
I have a form built using adobe X. I am using Topaz signature pad to have a digital signature in my form. My application (which was built on Progress 4GL) opens up this form using rich text editor. Most of my clients remote login to use the application. Every now and then my clients complain that whenever they click on the signature field on the form to open up the signature pad window, it kicks them out of the whole application. This happens so randomly that they can't predict when it occurs. I logged each and every lines on my code to see if there's any issue with the codes but they all execute fine. And I can't log after the form is open as adobe takes the control and they handle the communication with signaute pad. So far I have checked if there's any memory leakage that would kick me out and it's fine. And I think there's no driver issue as this happens randomly. A client who gets kicked out 1st time if tries the 2nd or 3 rd time following the same steps and same form, can successfully gets the job done.
Have any of you had faced similar issue. If you have any solutions or ideas that would be a great help to me.
Thanks!!
Him

Updates: Just found out that this issue rises only to the clients using Wyse terminals. Has anyone had any issue using Adobe forms and Wyse terminals?

Adobe form issue

hi all,
i have a issue:
in CS03 we give a print list of materials which is called painting list. its printed thru a script actually it is a copy of standard copy of adobe form. which was copied from adobe form to script and done development, now the issue is its printing only 1 page. its not printing rest of the pages. here the process of printing is kind of trickey,
from sapscript only data is passed using some control characters, and in the adobe layout it prints form correctly, after giving the print option from co03 if i go to sp01 and see the preview the format is as follows:
^global caufvd_gstrp
03.01.2009
^global caufvd_cy_sqnr
0
^global caufvd_aufnr
12345678
^global afpd_tab_kunnr
001
^global afpd_tab_kdauf
98563256
^global afpd_tab_kdpos
10
^global caufvd_tab_matnr
1234568922
^global caufvd_tab_maktx
material
^global caufvd_tab_gamng
1,0
^global caufvd_gstrp
03.01.2009
^global caufvd_cy_sqnr
0
^global caufvd_aufnr
12345678
^global afpd_tab_kunnr
001
^global afpd_tab_kdauf
98563256
^global afpd_tab_kdpos
20
^global caufvd_tab_matnr
23565464
^global caufvd_tab_maktx
material
^global caufvd_tab_gamng
1,0
and son on...
and when i print this form i get print out in nice format as it should come. now the problem is if i have more than 1 page im unable to print rest of the pages.
can anyone please help.
thanks,
anupama.

hi,
anyone please help. if this is not clear please let me know.
thanks,
anupama.

Adobe form issue in quality

Hi,
I have made few changes in HCM forms and processes mainly in the Adobe form script and in fieldname display (say changed from Emp Name to Employee Name in the form) but when I move the changes to quality to test it in portal, no changes are reflected.
The changes are available in quality system. I am able to view the script and form changes in HRASR_DT forms in quality (backend SFP/ through HRASR_DT). But when I open the form in portal using Start Process it does not show the new changes whereas it is still showing some old form.
I am not sure whether this is due to any buffer issue or not. When I import a new Transport Request to quality, it throws an ADS error when I try to open the form through "Start Process" in portal and the next time it opens form without new changes.
Please help me !!!
Thanks,
Arunsri B.S

Hi Christopher... Thank you so much for your reply. First of all thanks for all the blogs you have posted on HCM Processes and Forms...that's saving me till today and learnt a lot from your posts.
1. Yes I too felt that it should have been caching issue and I have raised it to the basis team, but yet to get a reply.
2. First thing is, I changed the script. I kept few pop up messages to test the script and then I removed it and transported again to quality, But still the pop up message were there even though there is no script. I checked in the xml source too and there is no script for pop up message.
Then to make sure, whether this is any script issue or not, I changed field label and even that did not reflect in quality.
Yes, I know this is pretty funny, we don't have test data in development, so we always do the changes in DEV and move to QA for testing.

Offline Adobe Form Issue

Hi Experts,
I have a requirement to add few fields in my offline adobe form (ZCI Layout) which is getting called from webdynpro abap (via UI element "FileDownload").
The new fields has been added in the context node of WebDynpro and the population logic is all written in the appropriate method. Now the same needs to be added in the Adobe form as well.
So can you please help me with how to update the XML interface for the Adobe form.
I have already refreshed DataView but its not working.
Thanks a lot in advance.

Please specify when the error occurs. According to my experience, the problem can be that the transformation (XML data --> ABAP variable) has found some unexpected character. If my guess is right you need to debug this trasnformation and remove the unwanted character before the transformation starts.

Adobe form issues

I am trying to input information in an adobe form that is supposed to be enabled but even though it shows a purple bar for each input section it will not allow me to type anything. The only additional option Adobe gives me is to open it in Adobe Vista. When I do this it allows some input but it is all over the place. If the form is in a different version of Adobe than I have installed do I need to install the older version in order to get it to work? Any info is appreciated.

What is "Adobe Vista"?

Adobe forms Issue

Hi
I have Copy Standard Adobe Form and used it with the logo and minor adjustment . when i see it in preview it doesn't show any fields , but when i call it and data come on the page it shows all the field properly.
How can i set fields invisible with out data in adobe forms in design mode
Regards
Ammad
Moderator message: once again, this is the wrong forum, please have a look in the forum for "Adobe Interactive Forms", please use meaningful subject lines when posting.
Edited by: Thomas Zloch on Mar 21, 2011 1:41 PM

dear Rajiv,
it is not possible to work on Adobe forms on u r local PC..u need to install Adobe LifeCycle designer which is licensed software.u can download from some portals,but u cant work properly.
Thanks,
Madhukar.

Adobe form issue in ESS

Hi Expert,
I encounter an error when showing the payslip through ESS, it seems that it is related to the adobe licensing. Could anyone let me know how to solve this?
#/System/Server##com.adobe.service.sap.licensing
#Guest#0##n/a##5a5fd7a04e5911de9a5800145ee511c0
#SAPEngine_Application_Thread[impl:3]_1##0#0#Info#1
#com.adobe.service.sap.licensing
#Plain###Calculate licensed forms, found: 0recently modified forms#
Best Regards,
KT

KT,
Please refer to this....
http://help.sap.com/saphelp_nw70/helpdata/EN/9f/36b2ca6a2642c2b8412677eb1fe9c0/content.htm
Regards,
Sandeep Tudumu

Adobe form -- Issue in Displaying Dynamic text along with Static text

Hi All,
I am having an issue when i am displaying a dynamic text along with static text in adobeforms.
The dynamic text is slightly coming down and not aligned with the static text. i can see half row it is coming down.
how to align both texts to be printed in same format.
Request all of your expert advices in achieving this .
Thank you in advance.
Thanks&Regards,
Phani Miriyaila.

Hi,
Select both dynamic and static text in the layout. Goto Object palette -> Layout. Give values to X,Y coordinates and Height & Width. Anchor properly and specify margins as well.
Select both dynamic and static text in the layout. Right click on it and goto palettes -> Paragraph. It gives you the text alignment options. Align the text and give similar font and size.
Thanks & Regards,
Sanoosh

Issue While printing / Previewing a Adobe form in Web Dynpro ABAP application

Dear All,
We have designed 4 different adobe forms using SFP transaction for 4 different countries in SAP system.
Every country have different terms and conditions and therefore we have placed static texts (Hardcoded text) with text in different styles. Some text is in bold, some in different font (Bold, Italic). Font and Paragraph settings of the text was done as per expected. All the forms have same font and paragraph settings.
When we Launch Web Dynpro ABAP application to open the form in Print preview or to take print, form is not getting displayed / printed as it is designed in SFP. But if you open the form in SFP, everything looks fine.
It is working fine for 3 different forms but problem with only 1 form.
Kindly guide what is the reason for this strange issue when previewed or taken print. It is very urgent.
Thanks,
Bharath.K

Dear All,
Thanks for your responses.
We had identified the reason.
Customer has provided terms and conditions for all 4 countries in PDF document. Along with PDF, for 3 out of 4 countries customer has shared pre-prepared word document with pre aligned and justified terms and conditions as per expected outcome. We copied this text from word to Adobe form layout. It worked fine. For 1 country, customer have not shared terms and conditions in word document. Therefore we had copied text directly from adobe PDF document in to Form layout. Then this issue happened.
Solution for this issue is to, prepared a word document with expected alignment and justification of terms and conditions text . Then copied from word to adobe livecycle designer form layout. It worked fine.
Thanks,
Bharath.

How to refresh the data in Adobe forms

Hi,
I have created an Adobe form through SFP transaction and a print program which passes data to the form through an internal table. The probelm is, first time the data is getting printed perfectly as per the internal table, but next time when I again run the program for new set of data, the form doesn't display the current data. It still has previous data in it, though the internal table contains the correct data. Can any one tell me why this is happening? Is there any way to refresh the adobe form data?
Thanks in advance,
Kiran

Hi,
Your Try and check this statement program level...
FREE <itab>
Regards,
Ansari.

How to use Adobe forms with F150 Dunning Run

Hi,
I want to use Adobe forms with the transaction F150 Dunning Run.
How do I get the adobe form in customizing? I have put the FM 'FI_PRINT_DUNNING_NOTICE_PDF' in business transaction Event, BF31 - P/S modules of SAP app - 00001720, Fi-FI. But it is still not recognizing the ADOBE form.
Any help is greatly appreciated.

Hi,
I am also working for calling custom adobe form instead of sapscript.
While configuring BTE 1720, i noticed that configuring BTE only FI-FI application does not solve the purpose. You need to assign function module FI_PRINT_DUNNING_NOTICE_PDF for all Application Area Indicator.
Adding to IS-PS will allow to print for customer.
This solved my problem. But this setting is global so you need to take care of it.

Adobe Form in PT60?

Hello all,
I would like to ask you about the possibility of getting an Adobe form using the transaction PT60 (time evaluation transaction).
Up to now, after evaluating one employee we are getting a plain form, using "write" instructions.
Would it be possible to get an adobe form instead of this plain form when pressing the corresponding button?
Is it necessary to use another transaction (similar to the PT60) to get the adobe form?
Please, let me now the steps to follow.
Thank you very much in advance.

Hey Easwar,
Thanks for the reply.
However, we have been able to provide links on the CRM UI screen which will open up PDFs in a popup.
We were wondering whether it could be done within the same screen itself and not in a popup.
Again, there is a concept of Webdynpro islands in ABAP which suggest that we might be able to integrate Adobe Flex components in CRM.
Regards,
Ravi Bhatnagar

Adobe form Issue in transaction PR05

Similar Messages

Maybe you are looking for