Adobe Form not there, no errormessage

Hi,
im wondering why in MSS in the workset Team when i Start "Create New Requisition Request" the adobe form does not work. The problem is, that when I create a new requisition in the second step there should be an adobe form. Instead of that form i have the aea marked and a littel red cross in the upper left corner (like when an image in internet explorer is not available).
Do you have any suggestions on that?
Thank you
Christoph

Hi
install proper version adobe reader and ACF .for more detail check the following note
1.Note 834573 - SAP Interactive Forms by Adobe: Acrobat/Reader version
2.Note 766191 - Active Component Framework Installation
Thanks
Gopal

Similar Messages

Adobe form not dispalying content in portal

Hi Experts,
We have one issue in Portal.
One user clicked on UWL item in portal its opening subscreen as like behaviour.
In subscreen adobe form its not displaying any content and its displaying only approve and reject buttons.
we checked user browser settings and adobe version settings and user authorisations .
All are Ok.
But adobe form not displaying content.
Thanks,
Bheem V.

Hi Bheem,
The problem is not clear to me. Is this a user specific issue?
Thanks & regards,
Sanoosh

Make Adobe form not editable and Password protected

Hi All,
Want to add a button on adobe form , when user clicks the button then the form shouldn't allow to edit fields anymore.
I think this can be coded under script editor.
Please anybody specify the syntax to make adobe form not editable.
And my another issue is whether we can handle adobe forms password protected through SAP. kindly specify any approach.
Thanks in advance.
Regards,
Ashweeni.

Hi Ashweenip,
PASSWORD PROTECTED PDF FORMS:
Go through these Threads
[Password protected PDF file|Re: Password protected PDF file]
[pdf with password encryption|pdf with password encryption;
Regards
Pradeep Goli
Edited by: Pradeep Goli on Feb 4, 2010 11:13 AM

Adobe form not saving user-input data into saved pdf file

Hi forumers,
I'm a new abap developer and I'm tasked to create an interactive adobe form that will require the user to input data in the form.
No data is passed and received from PDF, but PDF has to be u2018Fillableu2019. I am able to fill out the form but when I actually save the form, it will be saved as a blank form again. I've seen the relevance of the LS_DOCPARAMS-FILLABLE = 'X' on this forum and I have incorporated it in my code. But how should I code the abap program to enable to save the user input as well into the form.
DATA: GV_FMNAME TYPE FPNAME,
      LS_DOCPARAMS    TYPE SFPDOCPARAMS,
      LS_OUTPUTPARAMS TYPE SFPOUTPUTPARAMS.
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
    I_NAME                     = 'ZSC_ZRUFORREP'
IMPORTING
   E_FUNCNAME                  = GV_FMNAME
*   E_INTERFACE_TYPE           =
*   EV_FUNCNAME_INBOUND        =
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
    IE_OUTPUTPARAMS       = LS_OUTPUTPARAMS
EXCEPTIONS
   CANCEL                = 1
   USAGE_ERROR           = 2
   SYSTEM_ERROR          = 3
   INTERNAL_ERROR        = 4
   OTHERS                = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LS_DOCPARAMS-FILLABLE = 'X'.
LS_DOCPARAMS-DYNAMIC = 'X'.
CALL FUNCTION GV_FMNAME
EXPORTING
   /1BCDWB/DOCPARAMS        = LS_DOCPARAMS
* IMPORTING
*   /1BCDWB/FORMOUTPUT       =
EXCEPTIONS
   USAGE_ERROR              = 1
   SYSTEM_ERROR             = 2
   INTERNAL_ERROR           = 3
   OTHERS                   = 4
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'FP_JOB_CLOSE'
* IMPORTING
*   E_RESULT             =
EXCEPTIONS
   USAGE_ERROR          = 1
   SYSTEM_ERROR         = 2
   INTERNAL_ERROR       = 3
   OTHERS               = 4
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks,
dgrachee

Not quite yet, I have to say...
If you check the domain "FPINTERACTIVE", you'll see these values:
               Print Form
X     Interactive Form with Additional Usage Rights
N     Interactive Form Without Additional Usage Rights
F
So, you are not providing "additional usage rights" (Adobe Form Credentials), meaning there could be a problem when you want to use those forms in a Production environment.

Adobe form not working after MSS Patch Upgrade

Hi,
We have implemented ESS/MSS and in one of the MSS scenario to create a new personnel chnage request we have an Adobe interactive form (WD) which actually validates the users Social Security number by calling an RFC in the ECC 6.0 and updates the form's filed on the front end. There was an issue of "Expired SSO Ticket" and to resolve this SAP recommended to apply SAP_JTECHS (SAPJTECHS13P_14-10003467) and SAP_JTECHF (SAPJTECHF13P_15-10003468) patches to fix the problem. But after applying these patches Adobe form for PCR has stopped working and it just gets hanged, form appears on the front end and when user enters the values and hit enter to validate, it doesnt communicate with the Backend ECC system only the SAP status picture keeps rotating, i turned the trace ON and checked it, its not at all communicating with the ECC system. Where as in other systems where we have not appplied the pacthes, those are working fine. One of the error i noticed in the server log is as below:
jco.client.mysapsso2=AjExMDAgAA5wb3J0YWw6QkNPTFNUT4gAE2Jhc2ljYXV0aGVudGljYXRpb24BAAdCQ09MU1RPAgADMDAwAwADU1BEBAAMMjAwODExMDMxNjU3BQAEAAAAEAoAB0JDT0xTVE//AQUwggEBBgkqhkiG9w0BBwKggfMwgfACAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGB0DCBzQIBATAiMB0xDDAKBgNVBAMTA1NQRDENMAsGA1UECxMESjJFRQIBADAJBgUrDgMCGgUAoF0wGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMDgxMTAzMTY1NzQwWjAjBgkqhkiG9w0BCQQxFgQUfD7V7TS!58cgzIFyucxCSL4ltuswCQYHKoZIzjgEAwQvMC0CFA4Q0!Rr2xYFPwFwXz8WeFF1UALlAhUAmHiTdHw!3s4Q!Jc9gDyY4QSvxa4=, user=, mshost=sapdv2.company.com, r3name=DV2, jco.client.type=B, jco.client.trace=0, group=SRS, codepage=1100}
Client not connected#
#1.5 #76C1EDD07B440026000000000007501600045ACC2EF6809D#1225732914577#/Applications/BusinessLogic#sap.com/home~zb2bzsrs#com.sap.isa.core.eai.sp.jco.JCoConnectionStateful#BCOLSTO#1480##hadspd1.bnet_SPD_306896250#BCOLSTO#daca9e30a9cb11dd99c976c1edd07b44#SAPEngine_Application_Thread[impl:3]_19##0#0#Error#1#/Applications/BusinessLogic#Java###Error occcurred in EAI layer "".#2#com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in module RSQL of the database interface.#parameters: [client]='null' [user]='null' [language]='null' [ashost]='null' [systemnumber]='null' [mshost]='null' [gwhost]='null' [gwserv]='null' [group]='null' [systemid]='null'
Properties: {passwd=?, lang=en, client=150,
Can someone please suggest what could be the possible reason for such a problem with Adobe form and whats the way out to resolve this. Appreciate a quick help in this regard.
Thanks in advance,
Sarabjeet.

Hi,
We had the same issue after the Patch update to SP17 in both Backend as well in Portal, to resolve my colleagues had a look at the standard forms which were working and found that because of the patch update the script used in the custom forms was changed and not the standard and
on event trigger which was processed in the container they replace the script to the standard one. and it started working.
But this is not the solution we are looking at solution on having the same version of script as in the standard even after the patch update.
So to your point to resolve compare the scripts in both standard and customized forms and do the same.
And also have a look at the SAP Note: 1109392
.... this is a temporary solution.....
Hope this helps.
Cheers-
Pramod

Input data in adobe form not geting saved to desktop

Dear All,
I have adobe form incorporated in a wed dynpro component. It's an interactive form and user has option to fill in details in the form. There is a submit button which user can click in order to submit details. This submit in turn does posting. Method is written in wed dynpro view for validation and posting.
My problem starts here, when user has clicked on submit and posted, posting happens and finally the data is present in adobe form with the new PR no crated. When i try to save this form in my desktop it saves a blank form and not the data which is present in it. However if i don't click on submit and save the pdf with the manually entered values it save properly with the data.
Please help in getting to bottom of this issue. One point, i have no idea about adobe forms, so pleae let me know for some obvious case as well.
Thanking everybody in advanc.
Regards,
Saud

Thanks for your reply.
1. I tried finding similar questions but was not able to do so.
2. Yesterday itself i found out that it's working fine for some users but not for others. So i am just wondering whether it's a problem related to version of softwares like Adobe or IE?
I have IE7 and Adobe Reader 9.4
Please give some inputs, friends.
Regards,
Saud

Adobe form not saving data.

hi Experts,
I am facing strange problems with Adobe forms.
I am working on both Offline and online adobe forms.
adobe form which i make does not allow to save data.
I am using the Adobe liveCycle designer 7.1.
The Adobe reader version is 7.08
and service pack is SPS 11.
I have used both the tutorials for offline and online adobe forms.
Online Problem :-
The project for online works fine and it also allows to save data(when i save the form on my PC).
But when i create a new form on my machine it does not allow to save data.
Really confuse what the problem is.
I have also tried this.
Copeid the XDP file from the Online tutorial project into my project
if i use this work around the the problem is resolved. But i am no able to understand why the XDP CREATED on my machine does not work.
Offline problem:-
In this case i am not able to save data in the form at all.
As the PDF created itself not allow to save data.
Please help.
Points would be awarded to helpful answers.
Regards,
Sanjyoti.

Hi Satya & sanjyoti,
I am facing a pecular problem in using Adobe forms.
I am able to pass data from webdynpo application, to the Interactive form(using mappings, as mentioned by satya).
But for the same form & WD application, i am not able to pass data from the Interactive Form, back to the WD application.
My scenario is like this:
I need to show a form, with some prefilled data, such as date, userID, etc. I populate the node in my WD application, & then call the form.
The form displays the above prefilled data. Now the user has to fill the remaining fields & click on submit(Submit-to-sap button). The onsubmit property of the Interactive form is mapped to a onaction event, where WD tries to read the data entered by the user.
The problem is that on clicking of the submit button in the form, the event is not getting called.
If i use a button in the WD view itself, then the action gets called, but there is no data. In short, the data is NOT getting passed from Interactive form to WD application.
Can you please help me out with this?
Thanks,
Hanoz

Adobe form not showing negative sign before amount

Hi Experts,
We are having a strange problem. Our developers displaying
negative
amount in my adobe output. Its working fine in our development
system.
But for the similar set of data in testing system, negative sign before
the amount is not coming. The same adobe form, layout and print
program
is there in both development and test environment systems. Please
help.
Thanks,
Sunny

Hi Sunny ,
Check with the development team .. The field attribute while display types which you can restrict in the adobe form layout settings.
I am pretty sure this will help you and revert back if you have any questions in this regard.
Thanks ,
Gowrisankar

Adobe form not visible

Dear all,
I am developing application based on adobe forms but I am not able to see the same after deploymnet. It's deploying properly also I am able to get the message printed but the adobe form is not visible. I want to know is there anything I need to check or it's some server problem. Please help me in this regard.
Thanks in Advance
Gaurav Bhardwaj

Hi Gaurav,
Below is the link to download ACF:
Use this one:
https://sapmats-de.sap-ag.de/download/download.cgi?id=F9RUZ3Q7TERUBSMHSXWT3UMEM59IJYIPA931VQD32A1UNAKZ6B
Regards,
Arafat
Edited by: Arafat Farooqui on May 9, 2008 9:48 AM
Edited by: Arafat Farooqui on May 9, 2008 9:50 AM

Adobe Form not getting displayed on the portal

Hi,
From the MSS portal when I run the process, the associated adobe form(using HCM) doesn't get displayed on the portal. Initially the problem was with higher version of acrobat reader but now it is solved. Now I am not getting any error or warning but adobe form still not getting displayed.
Please help.

Later

Adobe Form not getting interactive in Web Dynpro

Hello Experts,
I am facing a strange sort of behaviour, which has drawn my plenty of time, while making use of Interactive Adobe Form in Web Dynpro component.
In my scenario, I have one existing Adobe Form with interface of type "ABAP Dictionary-based interface". While using this form in Interactive Form element in Web Dynpro and making it enabled, it is not giving me the expected output, that is - Interactive Form in browser window. Instead, it is showing me read only Adobe Form. Has it to do with type of interface?
Looking forward to active replies.
Regards,
Harsh

Hello Harsh,
In webdynro adobe integration we use webdynpro native controls and the form must be in the
ZCI layout. In SFP >layout you have to insert the webdynpro script .After going to the layout
go to utilites and insert webdynpro script.Then you can find a variable containerfoundation_js.
If you have changed the layout from standard layout to ZCI layout in form builder (SFP), the update the layout using program FP_ZCI_UPDATE.
Refer to link below
Call Adobe Form through ABAP Web Dynpro - Web Dynpro ABAP - SCN Wiki
Regards
Sandy

Unable to send FAX of Delivery Note Adobe form - Not visible in SOST

Hello,
I have created a delivery note adobe form and the output medium has been configured as FAX. But when we are doing any delivery in VL02N, the FAX output is not going to SOST.
Let me tell you that, for printing it's working fine. It's going to SP02 successfully.
Thanks
Satya

Hello Satya,
This issue may be due to several reasons. Here are some of the reasons.
1. check the settings in the of fax in scot transaction.
2. check the whether any virus scan profile is active, if it is active, check whether any default profile is maintained or not.
Please provide me the procedure or function module which you are using to send fax. so that it will be easy to understand the type of the error. Also check whether email is working for the above scenario
thanks,
Rakesh.

Text in ADOBE form not printing while printing the form

Hi All,
I have created an adobe form and am trying to trigger an output linked to the form. The problem is that the output that gets triggered does not show some of the texts which are existing in the form.
So although the values are coming correctly the overall output becomes incorrect as the text goes missing. Let me know if you have any pointers to the issue I am facing.
Cheers,
Sharadendu

Hi Sharadendu,
First of all you need to put this question in Adobe Form related Forums.
Problems can be many in this case.
1: Overflow subform not selected.
2: Some condition failing in the text or subform.
3: Incorrect nesting of subforms.
Mainly your problem will be with the subforms , so you need to croos check all the subforms which you have used to hold data.
Regards,
Sandeep Katoch

Can we store values @run time in Adobe Forms when there are multiple views

Hi,
I am new to Web dynpro Java - Adobe Forms. I working on a solution for the following scenario.
I have 3 Views (each an adobe Form) in a web dynpro component.
I have to capture the user entered values in View1 and View2 (PDFs) and display them in VIew 3 (another PDF)
I am able to capture the values in the recent view. (view2) but the values from the view1(Context elements ) are cleared.
Can I hold or store the values from the first view like we do in java using session variables??
Also, if there is any other way out, please let me know.
Version:
NWDS 7.0.1
SAP Netweaver SP12
Adobe Designer - 7.0.1
Thanks in Advance.
Vasu

I got the solution

$ sign in adobe form not displaying properly..

Hi I have inserted 1 decimal field in my adobe form and display pattern of that field I have given as $(zzz,zzz,zzz,zz9.99).
but when i deploy my application and see in the portal, $ sign is not getting displayed properly, its not able to get interpreted properly.
I am using IE 7.0 browser.
please help how to get this issue resolved, do i have to change any browser settings ??

Hi,
I am using adobe reader 8.0
my locale is: default locale, i tried changing this with USA english , but still not luck
i am getting dark small square block instead of dollar sign (dollar sign not able to get interpreted properly)
please help.

Adobe Form not there, no errormessage

Similar Messages

Maybe you are looking for