Adobe form only first page is displayed

hi all,
I have created two pages under the Master page but only the First page is getting displayed. Both are set to visible. Whatelse could be the reason. Thanks.
Regards,
FS

Hi,
Can you please elaborate more on this. Have you added 2 body pages or 2 master pages?
If you have added 2 body pages and if they are empty then they wont get displayed. You will have to insert a subform into the page. Only then you would be able to see the extra two pages.
Thanks,
Radhika

Similar Messages

  • Adobe Form's First Page printing perfectly on 132 column sheet but further pages prints with small font size

    Dear All,
    We are facing a strange behavior of adobe form.
    we made form for SAP CRM which is printing in 132 column(28cm * 33cm) sheet. what we are observing is, first page is printing perfectly on the pre printed Invoice sheet but if invoice has more items to be displayed then second  page prints with small font size or you can say second page seems to be zoomed out to smaller page size. In Preview Second page onwards also looks perfect. Now we are in a fix what to do to come out of this issue.
    efforts made:-
    Adobe Page Size Adjusted.
    Select paper Source by Page Size ticked in Adobe form properties
    But still result is non satisfactory. Please Help.
    Regards,
    Ashkar Rizvi

    See my answers below:
    a) The size of the pages of PDF which you are printing. LETTER
    b) Does all pages of the PDF are of same size? YES
    c) What is the page size set in the Printer and what is the actual size of the paper which you have put in the tray? LETTER
    d) Does this problem also happens on the virtual printer which you might have on your system (Try either Microsoft MPS Document writer or Adobe PDF Printer) No VIRTUAL PRINTERS
    Thank you for attempting to help me with this... we have tried everything and haven't been able to resolve the problem.
    Sherri

  • How to get the text field in the header for only first page of the report

    Hi,
    I am developing reports in BI Publisher Enterprise where i am facing problem i.e., i have to get some text field in header,for only first page in the result but it is displaying in all the other pages of the report in result.So,please if you have any idea of how to solve it, please reply.It is required as early as possible.
    Thanks in Advance

    Invalid path? What are you doing? Writing the report output to an invalid directory?
    Where are your terms and conditions? It would be very easy just to put them in a database table and select them in your report query.

  • I am using window.print() to print the data of my webpage, it prints only first page and left the remaining while it works fine with IE and Google Chrome, ie print all the pages.

    My Page has data more than one page, it has verticle scroll bar to view all data .
    I used window.print() to print the data of webpage, but it prints only first page and left the remaining information.
    This works fine with Internet Explorer 6+ and Google Chrome.

    Does the entire webpage appear in Print Preview? <br />
    File > Print Preview

  • Only first page of pdfs will display in Reader for iPad?

    When I attempt to open some (not all) pdf files, only the first page of the document will display. The remaining pages show up blank, with the top toolbar also not displayed.
    These files are downloaded from my university's Blackboard app, with some working properly and others not despite them all being pdfs. I have tried downloading them directly from Blackboard and uploading them to Google Drive (where they display properly) and downloading them from there, but neither works. All files will open and display properly in iBooks so it seems that the problem is with Adobe Reader. How do I fix this?

    Are you running the latest Adobe Reader Version i.e. 11.0.1? Can you please share the file where you are encountering this issue to [email protected]?

  • Adobe forms - No scroll bar for Display only fields

    I am using adobe forms for SAP Enterprise Portal. i am using these in Worklfows. In the form there is a text field with no size limit and Allows Multiple Lines. Any amount of text is allowed to be entered. when the form is viewed by the next person, the script in the form make the field as read only. This is as expected.
    Problem: If there are multiple lines the scroll bar does not appear for the field. Entire content is not visible. Printout of the form prints the entire text from the field. In edit mode the scroll bar is displayed!!
    Adobe Reader version - 7.0.9
    OS - XP SP2

    Hi Sumant,
    I am facing same issue. Any solution ?
    Thanks & Regards,
    Tushar Trivedi.

  • Printing only first page landscape not portrait

    Acrobat Standard for Windows v.8
    When using Acrobat to print any PDF document, the first page is printed in landscape instead of portrait, the rest of the pages print as expected. This is reproduceable behavior on a single machine. Printing the PDF using other applications like InDesign or eCopy Desktop print as expected. Only Acrobat is exhibiting this behavior.
    Acrobat has been reapired, uninstalled and reinstalled, printer drivers reinstalled with no success. The work around I have figured out (as a temporary solution so the user can print documents properly) is to select to print the PDF in landscape orientation in the print driver when printing from Acrobat, which prints the whole document in portrait orientation, essentially what was supposed to happen in the first place. This orientation change only seems to affect the first page and doesn't have any affect on duplex orientation.
    Does anyone have a solution to this one? Or some direction? Thanks in advance.

    Try one of these:
    1/ In Adobe, deselect "Choose Paper based on PDF size" - you can leave the "Auto Rotate and Center" on.
    2/ In Adobe, go into Advanced and choose "Print as Image".
    3/ If this is a Canon H1 Fiery RIP, go into Printer Properties, Printing Preferences, Layout, Rotate 180degrees and choose "Large Paper Only."

  • Printing only first page

    --____FSVYRLDZXHAFLIWKCCOF____
    Content-Type: text/plain; charset=iso-8859-15
    Content-Transfer-Encoding: quoted-printable
    Greeitngs,=20
    We have numerous long pages - lists, lists and more lists -
    created in =
    DW8. Just about everyone here uses IE7, but we also have a
    few IE6 and =
    Firefox workstations.=20
    If a user tries to PRINT one of these long pages, such as
    this one:=20
    http://www.tsc.state.tn.us/geninfo/Programs/ADR/mediatorList.asp?chooseType=
    =3DGeneral+Civil&mnuCounty=3DAnderson&DisplayList=3DDisplay+List
    all they get is the first page of what ought to be six to
    nine print =
    pages.=20
    It gets weirder. On our index page,
    http://www.tsc.state.tn.us/
    if the =
    user tries to print it, the columns react differently. The
    center column =
    does not print past what fits ona printed page, while the
    right hand =
    column prints in its entirety. =20
    I've checked the CSS to see if there was a "don't print me"
    feature in any =
    of the CSS scripts, and there is not. the z-indexes appear to
    be ok. (the =
    two columns have the same z-index and are reacting
    differently to the =
    print command) =20
    My question(s) is(are): Can I better control the content of
    the page (the =
    two columns) and how? Is it CSS, html, or some other language
    that will =
    help me control this? Why is IE7 printing only one page of a
    multi-page =
    print job?=20
    Any ideas?
    NOTE: IE6 prints the entire page (multiple print pages). IE7
    and FF do =
    not.=20
    Peter
    --____FSVYRLDZXHAFLIWKCCOF____
    Content-Type: multipart/related;
    boundary="____RIVEUQBROELBXRGDYMGQ____"
    --____RIVEUQBROELBXRGDYMGQ____
    Content-Type: text/html; charset=windows-1252
    Content-Transfer-Encoding: quoted-printable
    <HTML><HEAD>
    <META http-equiv=3DContent-Type content=3D"text/html;
    charset=3Diso-8859-15=
    ">
    <META content=3D"MSHTML 6.00.6000.16525"
    name=3DGENERATOR></HEAD>
    <BODY style=3D"MARGIN: 4px 4px 1px; FONT: 10pt Tahoma">
    <DIV>Greeitngs, </DIV>
    <DIV>We have numerous long pages - lists, lists and
    more lists - created =
    in DW8. Just about everyone here uses IE7, but we also have a
    few IE6 and =
    Firefox workstations. </DIV>
    <DIV> </DIV>
    <DIV>If a user tries to PRINT one of these long pages,
    such as this one: =
    </DIV>
    <DIV> </DIV>
    <DIV><A href=3D"
    http://www.tsc.state.tn.us/geninfo/Programs/ADR/mediatorLis=
    t.asp?chooseType=3DGeneral+Civil&amp;mnuCounty=3DAnderson&amp;DisplayList=
    =3DDisplay+List">
    http://www.tsc.state.tn.us/geninfo/Programs/ADR/mediatorLi=
    st.asp?chooseType=3DGeneral+Civil&amp;mnuCounty=3DAnderson&amp;DisplayList=
    =3DDisplay+List</A></DIV>
    <DIV> </DIV>
    <DIV>all they get is the first page of what ought to be
    six to nine print =
    pages. </DIV>
    <DIV> </DIV>
    <DIV>It gets weirder.  On our index page,
    <A href=3D"
    http://www.tsc.st=
    ate.tn.us/">
    http://www.tsc.state.tn.us/</A> if
    the user tries to =
    print it, the columns react differently.  The center
    column does not =
    print past what fits ona printed page, while the right hand
    column prints =
    in its entirety.  </DIV>
    <DIV> </DIV>
    <DIV>I've checked the CSS to see if there was a "don't
    print me" feature =
    in any of the CSS scripts, and there is not. the z-indexes
    appear to be =
    ok. (the two columns have the same z-index and are reacting
    differently to =
    the print command)  </DIV>
    <DIV> </DIV>
    <DIV>My question(s) is(are): Can I better
    control the content of the =
    page (the two columns) and how?  Is it CSS, html, or
    some other =
    language that will help me control this? Why is IE7 printing
    only one page =
    of a multi-page print job? </DIV>
    <DIV> </DIV>
    <DIV>Any ideas?</DIV>
    <DIV> </DIV>
    <DIV>NOTE: IE6 prints the entire page (multiple print
    pages). IE7 and FF =
    do not. </DIV>
    <DIV> </DIV>
    <DIV>Peter</DIV>
    <DIV> </DIV>
    <DIV> </DIV></BODY></HTML>
    --____RIVEUQBROELBXRGDYMGQ____--
    --____FSVYRLDZXHAFLIWKCCOF____--

    Try one of these:
    1/ In Adobe, deselect "Choose Paper based on PDF size" - you can leave the "Auto Rotate and Center" on.
    2/ In Adobe, go into Advanced and choose "Print as Image".
    3/ If this is a Canon H1 Fiery RIP, go into Printer Properties, Printing Preferences, Layout, Rotate 180degrees and choose "Large Paper Only."

  • Adobe Reader Printing first page miniature - rest fine

    Hi,
    Currently running Reader 11.0.07 and am having a printing issue similar to the below known issue in Reader X.
    "Xerox printers shrink page content to 1/10 or 1/20 of the original size, and print the content in the upper left part of the paper. This behavior occurs when both of these options are selected in the Print dialog box: Choose Paper Source By PDF Page Size and Use Custom Paper Size When Needed. [2392553]"
    Is there any timeline for the issue to be resolved?
    Cheers
    Helen
    Hi,
    Additionally the driver being used is a KM C360 PS 3.6.0.0 and the Postscript pass through mode is enabled.
    When testing and disabling the pass through mode of the driver being used (XC, FX, Lemark ....) the first page (also including mixed paper size) is rendered correctly for the entire document output.
    Looking at the PS generated output for the KM driver in pass through mode has a difference between the prescript for the first page and any others following:
    Example - First page A4 size generates the following.
    %%BeginPageSetup
    /ovlsetup [ 72 600 V 0 0 -72 600 V 12 830 ] def
    /tabsetup [ 72 600 V 0 0 -72 600 V 0 841 ] def
    /DeviceRGB dup setcolorspace /colspABC exch def
    mysetup concat colspRefresh
    Adobe_AGM_Utils begin
    [/Label (1)]
    [/TrimBox [0 .280029296875 595 841.71997070313]]
    [/BleedBox [0 .280029296875 595 841.71997070313]]
    [/ArtBox [0 .279999 595 841.72 ]]
    ]xpdfm
    Adobe_AGM_Core/ps gx
    false Adobe_AGM_Core/begin_feature gx false {
    %%BeginFeature: *PageSize A4
    %%EndFeature
    } Adobe_AGM_Core/end_feature gx
    Adobe_AGM_Core/capture_mysetup gx
    Adobe_AGM_Core/driver_media_override gx
    [1 0 0 -1 0 842 ]ct
    Adobe_AGM_Utils/capture_cpd gx
    Adobe_CoolType_Core/ps get exec
    Adobe_AGM_Image/ps gx
    Adobe_AGM_Image/pt gx
    Adobe_CoolType_Core/pt get exec
    Adobe_AGM_Core/pt gx
    currentdict Adobe_AGM_Utils eq {end} if
    %%EndPageSetup
    Whereas the next page and subsequence pages follows:
    %%BeginPageSetup
    /ovlsetup [ 72 600 V 0 0 -72 600 V 12 830 ] def
    /tabsetup [ 72 600 V 0 0 -72 600 V 0 841 ] def
    /DeviceRGB dup setcolorspace /colspABC exch def
    mysetup concat colspRefresh
    Adobe_AGM_Utils begin
    [/Label (2)]
    [/TrimBox [0 .280029296875 595 841.71997070313]]
    [/BleedBox [0 .280029296875 595 841.71997070313]]
    [/ArtBox [0 .279999 595 841.72 ]]
    ]xpdfm
    Adobe_AGM_Core/ps gx
    Adobe_AGM_Utils/capture_cpd gx
    Adobe_CoolType_Core/ps get exec
    Adobe_AGM_Image/ps gx
    Adobe_AGM_Image/pt gx
    Adobe_CoolType_Core/pt get exec
    Adobe_AGM_Core/pt gx
    currentdict Adobe_AGM_Utils eq {end} if
    %%EndPageSetup
    Note that the concat override is not specified (including matrix).
    Removing this line "[1 0 0 -1 0 842 ]ct" allows the document to correctly render in the correct orientation but the scale and transform are not specified corectly.
    Page 2 shows that an additional difference is made by Reader in pass through mode:
    8.33333 8.33333 scale
    -12 -12 translate
    If replacing the first page prescript (above) with the following PS code the job correctly (Page 1):
    %%BeginPageSetup
    /ovlsetup [ 72 600 V 0 0 -72 600 V 12 830 ] def
    /tabsetup [ 72 600 V 0 0 -72 600 V 0 841 ] def
    /DeviceRGB dup setcolorspace /colspABC exch def
    mysetup concat colspRefresh
    Adobe_AGM_Utils begin
    [/Label (1)]
    [/TrimBox [0 .280029296875 595 841.71997070313]]
    [/BleedBox [0 .280029296875 595 841.71997070313]]
    [/ArtBox [0 .279999 595 841.72 ]]
    ]xpdfm
    Adobe_AGM_Core/ps gx
    false Adobe_AGM_Core/begin_feature gx false {
    %%BeginFeature: *PageSize A4
    %%EndFeature
    } Adobe_AGM_Core/end_feature gx
    Adobe_AGM_Core/capture_mysetup gx
    Adobe_AGM_Core/driver_media_override gx
    %[1 0 0 -1 0 842 ]ct
    8.33333 8.33333 scale
    -12 -12 translate
    Adobe_AGM_Utils/capture_cpd gx
    Adobe_CoolType_Core/ps get exec
    Adobe_AGM_Image/ps gx
    Adobe_AGM_Image/pt gx
    Adobe_CoolType_Core/pt get exec
    Adobe_AGM_Core/pt gx
    currentdict Adobe_AGM_Utils eq {end} if
    %%EndPageSetup
    Note that the issue is only generated by the printing through a driver in pass through mode. Setting print as image is not an option as the produced spool file is to large.
    Additionally, the paper size cannot be resized and must have the (above) option set during printing - any other permutations of the "Size" options during printing cause issues during printing (e.g. A3 -> A4 or mixed A4/3 -> A4).
    Thanks in advance
    Cheers
    Helen

    Oops, I forgot to NOTE: this only happens when I'm printing a pdf from online.  If I'm printing from a saved file from my computer adobe reader works just fine. so it's something with the settings of adobe reader and my browser.  I use chrome, always have and I'm just now experiencing issues these past couple of weeks.  I'm sure it's just a simple little box to check or uncheck or something, so I'm hoping someone can steer me in the right direction.
    Thanks!
    Valerie

  • Acrobat Pro 9.0 printing to Canon ImageRunner 3220 prints only first page of multi-page documents?

    We just got the new CS4 and with the Acrobat Pro 9.0 install, we cannot seem to print multi-page documents.  Only the first page comes through, and the queue clears as though the document's been fully printed.
    We are running Windows XP Pro SP3, and the printer is the Canon ImageRunner irC3220.
    I do not want to use the "Print as Image" option, as I don't want to rasterize the file before sending it to the printer. It's an important document and it's imperative that it is printed at high quality.
    We had no problems printing with Acrobat 8.
    I've seen old posts regarding this issue, but couldn't find anything newer that might have had an updated solution.
    Thank you in advance!! any help would be sooo appreciated right now!

    Great! Many thanks
    Is there actually a kind of marketplace for Javascipts for Adobe Acrobat Pro somewhere? ...
    Really useful!

  • Printing only first page of multiple PDF's

    I need to be able to process a stack of PDF documents.
    What I need: to always print-out only the first page of all documens.
    These are invoices with sometimes 5 pages, sometimes 2....but I only need to archive the frontpage.
    So: opening each of these maybe 100 documents and always only print the first page manually seems a bit like "nonsense" to me.
    Could do this on a friends machine who has an Acrobat Pro X installed.
    Help appreciated
    Anna

    Great! Many thanks
    Is there actually a kind of marketplace for Javascipts for Adobe Acrobat Pro somewhere? ...
    Really useful!

  • ADOBE FORM: Start new page at subform

    Hello,
    in the interface of my adobe form i have a table.
    I created a subform with binding to the table row.
    This works so far.
    But i want now that for each table row (= subform) a new page is started at the PDF.
    How could this be realised?
    Thank you
    Kind regards
    Manfred

    These can be done via options in Pagination tab for the "Body Row" of table.
    I just tried a sample as follows and it kind of worked.
    form1
    |-- Subform    // Object palette --> Subform tab --> Make its Content property to Flowed.
      |---- Table1
        |---- Row 1  
    // Object Palette --> Type is Body Row
    //  Object Palette --> Pagination --> After : Go To Next Page
    //  Object Palette --> Binding --> Selected Repeat Row for each Data Item and made its min count as 5
    Only thing is that I am getting a blank page at end but then may be this can point you in some direction and you will solve that for us

  • PDF Documents oplen only first page

    When  I open a PDF document it show only the first page with no option to scroll.  It used to work.  I used Lion and have upgraded to Mountain Lion.  The problem was before I upgraded.  How can I solve this problem?
    Thank you.
    Maria

    This forum is for users of an iPad, iPhone, or iPod Touch, and Adobe Reader on those devices.
    It's sounding like you are having problems with PDF in Adobe Reader on a Macintosh. Is that correct? If so, you should ask in this forum:
    Adobe Reader

  • Help - Trying to email 2 page PDF but only first page is attaching

    I have been trying to email a two page pdf (resume) but each time in Mail, it only attaches the first page (actually, it doesn't attach it but paste the first page of the pdf into the document).
    I've tried this three different ways, all with the same result: 
    1) First I created the document in Pages '09, then saved it as a PDF.  When I open up the PDF itself, the entire two page document is there.  When open on the PDF document, I click the share button, select mail, and when a mail window opens up, only the first page of my resume appears pasted into the body of the email.
    2) I open a new window in Mail, I click on the paperclip to attach a document, I select the two page PDF I created, and once again, only the first page appears pasted into the body of the email.
    3). When on the Pages version of my resume, I go to File, then Print, and select "Mail PDF" from the PDF drop down menu...once again only page 1 is pasted into the body of the email.
    I also tried this with a different document and once again only the first page gets pasted.
    I am running Mac OSX Version 10.9
    Thanks in advance for your insight.

    Are you sure that it is only the first page? It is a file and usually only the first page shows, but the rest are there.
    What happens when you double click on the pdf in the email?
    Peter

  • Only first page of a large JTable will be printed.....

    Hi,
    I print a JTable with e.g. 4 pages with an BrotherHL1660e-printer. I used the code below, I have got this from http://developer.java.sun.com/developer/onlineTraining/Programming/JDCBook/advprint.html#pe and modified it a little bit.
         Graphics2D g2 = (Graphics2D) g;
         int fontHeight=g2.getFontMetrics().getHeight();
         int fontDesent=g2.getFontMetrics().getDescent();
         //leave room for page number
         double pageHeight = pageFormat.getImageableHeight()-fontHeight;
         //Seitenbreite
         double pageWidth = pageFormat.getImageableWidth();
         //Tabellenbreite
         double tableWidth = (double) ((JTable)componentToBePrinted).getColumnModel().getTotalColumnWidth();
         double scale = 1.0;
         if (tableWidth >= pageWidth) {
              scale = pageWidth / tableWidth;
         double headerHeightOnPage=
    ((JTable)componentToBePrinted).getTableHeader().getHeight()*scale;
         //Tabellenbreite wird f?r die Seite passend verkleinert
         double tableWidthOnPage=tableWidth*scale;
         //H?he einer Zeile
         double oneRowHeight=(((JTable)componentToBePrinted).getRowHeight())*scale;
              //Anzahl Zeilen auf einer Seite
         int numRowsOnAPage=
    (int)((pageHeight-headerHeightOnPage)/oneRowHeight);
              //H?he einer Seite
         double pageHeightForTable=(double)(oneRowHeight*numRowsOnAPage);
              //Anzahl Seiten gesamt
         int totalNumPages= (int)Math.ceil((
    (double)((JTable)componentToBePrinted).getRowCount())/numRowsOnAPage);
         if(pageIndex>=totalNumPages)
    return NO_SUCH_PAGE;
         ((JTable)componentToBePrinted).clearSelection();
    ((JTable)componentToBePrinted).requestFocus();
              //Verschieben zum oberen linken Rand der Seite
         g2.translate(pageFormat.getImageableX(), pageFormat.getImageableY());
              //Schreiben der Seitenzahlen am unteren Rand der jeweiligen Seite
         g2.drawString("Page: "+(pageIndex+1),(int)pageWidth/2-35,
    (int)(pageHeight+fontHeight-fontDesent));//bottom center
    //          Hintergrundbild (graues Rechteck) f?r den TableHeader
         int colCount= ((JTable)componentToBePrinted).getTableHeader().getColumnModel().getColumnCount();
         double colWidth=tableWidth/colCount;
         int x=0;
              BufferedImage img=new BufferedImage((int)tableWidth, (int)headerHeightOnPage,BufferedImage.TYPE_USHORT_GRAY);
              Graphics2D iG= (Graphics2D)img.getGraphics();               
         for (int i=0; i<colCount; i++)
                   iG.setColor(Color.gray);
                   iG.fill3DRect(x,0,img.getWidth(),img.getHeight(),true);
    //          x+=colWidth;
         iG.scale(scale,scale);
         g2.drawImage(img,null,null);
              x=0;     
    //          Zeichnen der Spalten?berschriften
              for (int i=0; i<colCount; i++)
                   g2.drawString((String)((JTable)componentToBePrinted).getTableHeader().getColumnModel().getColumn(i).getHeaderValue(),
    //                              x,(int)headerHeightOnPage/2);
                   x+=colWidth;                              
         g2.translate(0f,headerHeightOnPage);
    //          linie auf der linken Seite der Tabelle
              g2.setColor(Color.gray);
              g2.drawLine(0,0,0,(int)pageHeightForTable);
    //          g2.setColor(Color.black);
         g2.translate(1f,(double)(-pageIndex*pageHeightForTable));
    g2.setClip(0, (int)(pageHeightForTable*pageIndex),
    (int) Math.ceil(tableWidthOnPage),
    (int) Math.ceil(pageHeightForTable));
              //Anpassen des Graphic-Kontextes an Seitengr?sse
         g2.scale(scale,scale);
              //rendern der aktuellen Seite
         ((JTable)componentToBePrinted).paint(g2);
         g2.scale(1/scale,1/scale);
         g2.translate(1f,(double)(pageIndex*pageHeightForTable));
         g2.translate(/*0f*/(double)0.0, -headerHeightOnPage);
         g2.setClip(0, 0,(int) Math.ceil(tableWidthOnPage),
    (int)Math.ceil(headerHeightOnPage));
         g2.scale(scale,scale);
         return Printable.PAGE_EXISTS;
    I have modified the code so that I do not paint the TableHeader. Instead of this I paint grey BufferedImages and the text of the TableHeader on this Images. The reason is that if I paint the TableHeader, only the last row of the Header will be printed but not the table. If I paint the images instead it works.
    But my next problem is that I can only print the first page. From the next pages only the last column of the last row will be printed.
    Has anyone a good idea to solve this problem? Please help, I am working at this for a couple of days now and I am going mad :-(.
    Thank you in advance - netti
    PS: excuse my bumpy english

    Hey all,
    I solved this problem. It was not a code-problem but a printer problem. This code do not work on a BrotherHL1660e-printer. On all other printer I tried it works fine.
    Greetings - netti

Maybe you are looking for