ADOBE Form printing terms and conditions back side of first page only.

Hi ,
Please let me know how to print only on first page back side in the adobe. I have multiple pages data flow. But i have to print Conditions on the back side of first page only.
Thnaks in advance.
Hema.

Hello Hema,
Create a master page set.  One for front page and other for back page.
Make your hierarchy as Front Page - Oddpages
Back page - Even Pages
in placement options use, for first page only.
Thanks,
Rakesh

Similar Messages

  • Print Terms and conditions on Back side in Smart Forms

    Hi All,
    How can we print Terms and conditions on back side of last page. we are using SAP Smart Forms to print Packing Slips now we need to print the terms and conditions on back side of last page. who can we do this ... ?
    I have created 2 pages first page and Last page i have selected last page as  next page for First page and  vice vis and selected duplex printing for first page print option.
    Now the problem is the terms and conditions are printed on all the pages but not on the last page. for example if i have 5 pages then all the 4  pages are printed on front and back but the last page(5) is printed only on the front side but not on the back and if we print only 1 page then only front page is printed and no back side is printed.
    please let me know what else need to be done in order to print the terms and conditions on the back side of last page.
    Thanks,
    Praveen Chindam.

    Hi,
    There is quite a simple solution. We have exactly the same requirements for our invoices.
    Create 3 pages in the Smartforms, e.g. FRONT, BACK and LAST.
    FRONT has print mode "D" (duplex) and next page "BACK"
    BACK has print mode " " (unchanged) and next page "FRONT"
    LAST has print mode " " (unchanged) and next page " " (blank)
    BACK and LAST are identical apart from that, and do not have a MAIN window - they just contain the T&C in a secondary window.
    At the very end of the MAIN window on the page FRONT, insert the command NEW PAGE <LAST>.
    This will give you a print out that is
    FRONT, BACK, FRONT, BACK,....FRONT, BACK, FRONT, LAST.

  • Need to Print "Terms and conditions" on every back side of the page

    Hi All,
    i have requirement like need to print "Terms and Conditions" text on every back side of page using adobe form.
    i have tried options like created created 4 pages in master page and defined flow content page1->page3, page2->page4(terms and conditions). but when we execute less items of the billing number got the 3 pages i.e page1 having item data, remaining 2 pages displays the  "terms and conditions" text.
    if any worked on the same kind of requirement please let me know and it would be great helpful to me.
    Thanks,
    Ramana

    Hi,
    One of the option is that you can create 3 pages in the Smartforms, e.g. A, B and C.
    A has print mode "D" (duplex) and next page "B"
    B has print mode " " (unchanged) and next page "A"
    C has print mode " " (unchanged) and next page " " (blank)
    B and C do not have a MAIN window - they just contain the Terms & Conditions  in a secondary window.
    At the end of the MAIN window on page A, insert the command NEW PAGE <C>.
    This will give you a print out that will be in a sequence
    A,B,A,B,...A,B,A,C.
    Regards,
    PP

  • Printing terms and conditions for a report in last page

    Hi all,
    I am facing a problem in reports 6i, I have PO printing Report with layout to be printed in two pages first part will be printed with po details, and for every po number after printing all the details for that purchase order, in the last page i have to print terms and conditions can any one help me out
    Regards
    Vizith

    Hello,
    You should post also the report type (Tabular, Group..etc) you are trying to create also. Because without that like these type of requirement can not be suggested.
    I can only make guess that you are creating report as Group Above and group frame is for PO. Then just put your terms and conditions frame after the detail frame inside the group frame. Then it will print after completing the details for each PO.
    -Ammad

  • Ios7 "Cannot Connect to iTunes Store". When I try clicking on the "Terms and Conditions" in iCloud, it first says "Cannot Connect" and then the following mes

    Hi, I have upgraded my iphone 4s to ios7 and now when I am trying to login to app store, it says "Cannot Connect to iTunes Store". When I try clicking on the "Terms and Conditions" in iCloud, it first says "Cannot Connect" and then the following message: "Verification Failed: the certificate for this server is invalid. you might be connecting to server that is pretending to be setup.icloud.com, which could put your confidential information at risk". My wifi is working properly as I have accessed websites from safari. I reset my network settings too and even reset my password. But none of these get my iphone working.

    I'm having the same problem with the iTunes Store...it much be down :(

  • Printing Terms and Conditions for each Purchase order in the RDF output

    Hi All,
    Present i have an RDF report with the registered concurrent program. when i run this concurrent program i am getting the terms and conditions at the end of the purchase orders only once(for example 10 purchase orders). Now the requirement is to get this terms and conditions printed for each purchase order. The output is in PDF format. It's an 11i RDF report. Can any one suggest me the methods how to do this? Please give me reply as soon as possible.
    Thankyou in advance
    Regards,
    Polimera

    Hi, Polimera
    Welcome to OTN
    Present i have an RDF report with the registered concurrent program. when i run this concurrent program i am getting the terms and conditions at the end of the purchase orders only once(for example 10 purchase orders). Now the requirement is to get this terms and conditions printed for each purchase order. The output is in PDF format. It's an 11i RDF report. Can any one suggest me the methods how to do this? Please give me reply as soon as possible.
    Take a fixed frame inside the purchase order master repeating frame and place your terms and condition inside the fixed frame.
    Hope this helps
    If someone response is helpful or correct, please mark is accordingly

  • Printing Terms and Conditions on last page of invoice

    Hi All,
    I am generating receivables invoices in PDF format from Oracle EBS R12i using BIP 5.6.3.
    I have a requirement to print T&Cs separately on the last page of each invoice so that:
    1. Regular invoice header and footer information do print on T&Cs page
    2. Page count on invoice should not T&C page. Example, if there are 3 pages in an invoice where first 2 are for transaction details and third for T&C then page count should display only as page 1 and 2 as "Page 1 of 2" and Page "2 of 2" (not as "Page 1 of 3", "Page 2 of 3" and "Page 3 of 3")
    Also I seen following thread on this forum but unfortunately its inconclusive:
    Printing Terms & Conditions page for Purchase Orders
    I would appreciate if you someone can throw in bright ideas about how this can be achieved.
    br

    I also have similar issue printing POs. I have followed the steps of Tim - http://blogs.oracle.com/xmlpublisher/2007/10/here_are_my_terms_conditions.html but the T&C page is being counted in the page total.
    Any idea to fix this issue? Thanks in advance.

  • Smartforms - print on back-side of first page

    Hi all,
    I'm a newbie concerning smartforms (just doing it because my colleague is sick) and I have to print something on the first page of a purchase order.
    SO I have three pages in my smartform :
    - first
    - terms
    - next.
    I put the output for page FIRST on D (duplex), and the next page on TERMS
    For page TERMS ; output : blank, next page -> NEXT
    for page NEXT : newt page -> NEXT.
    But he doesn 't want to print the text on TERMSwhen the PO is only 1 page.
    What am I doing wrong ?

    Hi,
    check this:
    http://help.sap.com/saphelp_nw04s/helpdata/en/a5/de6838abce021ae10000009b38f842/content.htm
    http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
    http://www.sapbrain.com/TUTORIALS/TECHNICAL/SMARTFORMS_tutorial.html
    check this linkls------>
    https://www.sdn.sap.com/irj/sdn/collaboration
    http://help.sap.com/saphelp_erp2004/helpdata/en/a9/de6838abce021ae10000009b38f842/frameset.htm
    http://www.sap-img.com/smartforms/sap-smart-forms.htm
    http://www.sap-img.com/smartforms/sap-smart-forms.htm
    step by step good ex link is....
    http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
    Thanks & Regards,
    Abaper

  • Print text on back side of last page in sap script

    Hi All,
    In Script PO i have to print 'Terms and Conditions' text only on the back side of last page of the PO.
    Presently script contains two pages ( FIRST, NEXT).
    FIRST  with attributes :
       next page as  NEXT , Print mode T.
    NEXT  with attributes :
       next page as NEXT and print mode T
    Please help us in solving issue.
    Thanks and Regards
    Venkata Swamy

    Hi ,
    In Script PO i have to print 'Terms and Conditions' text only on the back side of last page of the PO.
    Presently script contains THREE pages ( FIRST, NEXT, TERMS).
    FIRST with attributes :
    next page as NEXT , Print mode T.
    NEXT with attributes :
    next page as NEXT and print mode T
    TERMS with attributes :
    next page as ' '.
    I Created 'TERMS AND CONDITION' window.For TERMS page i selected 'TERMS AND CONDITION' window only.
    So page window of 'TERMS'  is 'TERMS AND CONDITION'  and i included standard text in 'TERMS AND CONDITION' window.
    If PO contains 9 pages( that means MAIN WINDOW data flows up to 9th page with footer also ).
    So i have to print standard text(Terms and conditions) back side of 9th page only not on all pages.
    So total PO contians 9 pages with 10 prints.
    Please help to solve the issue
    Thanks and Regards
    Venkata swamy

  • How to print terms and cond of a PO in a fresh page in smartforms??

    hi All,
    My requirement is as follows...
    i need to print terms and conditions of a purchase order after the main window and the amount has been printed. the terms and conditions should be in a fresh page. i.e if the line items items and the amounts window occupies two pages. then terms and conditions should be printed on a fresh page i.e 3. the terms and conditins are many so it will occupy a full page. how do i call this page after all line items are printed??
    Any pointers reg this would be highly appreciated.
    Regards,
    Sreekanth.

    Hi,
    do the following steps:
    1.Create a New Page for Terms & Conditions (lets say Page3).
    2.First u describe the no of lines in your Internal table into a variable.
    3.In the LOOP create a counter & increase the counter for every line. also create another variable to set the flag when the Counter reaches the no of lines in internal table.
    4.Now, write a condition in Program lines if Counter =  No of Lines in internal table, set the flag variable to 'X'.
    5.Now create a condition on Page, IF FLAG = 'X', GO TO PAGE 3.
    Eg:
    DATA : gv_counter TYPE i,
               gv_lines TYPE i,
               gv_flag.
    describe table itab lines gv_lines.
    LOOP AT itab.
       clear : gv_flag.
       gv_counter = gv_counter + 1.
       IF gv_counter = gv_lines.
          gv_flag = 'X'.
          clear : gv_counter.
       ENDIF.
    Now U create a COMMAND in LOOP, Go to New Page (Give Page3) and conditions tab (write gv_flag = 'X').
    endloop.
    Hope it solves!!
    Rgds,
    Pavan

  • Files will not open? Says I need to agree to terms and conditions.

    I have downloaded Adobe Reader and the file says it is "finished" but I cannot open the files. I get a message that I must install Adobe, agree to terms and conditions and restart my computer.
    I have done this several times but get the same result. I am using a new Mac Book Pro.
    Acrobat Reader

    Hi 2181pine,
    Type Adobe Reader on 'Spotlight' and launch Reader. It will prompt the 'End User License Agreement'.
    Click on 'Accept'.
    After this it should work fine for you.
    Regards,
    Rave

  • How to create Standard text for terms and conditions of po print form

    Hi anybody,
      I want create Terms and condtions inside smartforms PO FORM , how do i create terms and conditons and how use font size? I don't want hard code inside smartforms , I will create seperate texts for terms and condition after i include inside smartform.
    How i will do ? anybody please tell me.
    Thanks
    S.Muthu.

    Hi Subramaniyan,
                             U an create an include text node in your smartform.And terms and conditions is the header level text,so i suppose you have to give the inputs as follows :
    Text Name         &**-EBELN&
    Text Object       EKKO
    Text ID              xxxx
    Language          &**-SPRAS&
    is the data at your end .To simplify more follow the following.
    1> go to your purchase order from me23n
    2> open any purchase order and click on the terms and conditions text.
    3> go to GOTO option of the text.and click on the HEADER.
    4> U will find the attributes of the text which you will have to pass to the Include text in your smartforms.
    The long texts arestored in STXH table.
    Reward Points if useful.
    Cheers,
    Deepthee Kasal

  • How to print the Terms and Condition page ine the sap-script

    Hi experts,
                             i got the requirement that how to print the Terms and condition page in the script,i have the three pages, having the same main window, in the last of the main window(all three pages)  i have called the hard coded text(i.e so10 text), but when i am displaying the output  data get printed in the first page but i am getting the second page heading on the top of  the terms and condiions page. In all the three pages i  have the same main window, if i  make change in any window i will affect all the other main  windows.  so please suggest me how i need to go.HOW TO GET GRID OF THE TEXT ON THE TOP OF THE SECOND PAGE OF THE TERMS AND CONDITONS.
    like this i have called in the MAIN WINDOW
    /E : LAST ( IN ALL THREE PAGES)
           INCLUDE ZSD_INVOICE_TERMS TEXT OBJECT TEXT LANGUAGE EN.
    IN THE TCODE SO10
    NEW PAGE TERMS.
    1) TERM MS AND CONDITONS  TEXT.................................................
    FIRST->NEXT, NEXT->NEXT,,   TERMS--->TERMS.

    Hi,
    1. Create a new page by Name : LAST
    2. Identify the text element which will be the last element in the form in the debug mode.
    Mostly Ex: SUM, TOTAL, LAST etc.,
    3. the page linking should be
    First --> Next
    Next --> Next
    4. In the Text element identified in the step 3.
    Write the following code
    /: NEW PAGE  LAST
    /: INCLUDE the standard text created for the terms and conditions in SO10
    Check the syntax for the command but the logic will be the same.
    It should resolve your problem.

  • Terms and Conditions in pdf output but not printing

    Hello all,
    I had this similar issue with my cover letter, but I could move the call to xml control file and that resolved the issue. But with T&C, I need to print them on back of every page and I've used the logic from Tim's blog (http://blogs.oracle.com/xmlpublisher/2007/10/here_are_my_terms_conditions.html, thanks Tim!). It works great if I have a simple call to the T&C subtemplate. I have to check for the conditions though, and that's when my printed/emailed output contains blank for T&C. Output of the report has alternate pages of T&C. Here's my call to the subtemplate:
    <?if:(//DCRD_OKSQUOTE_GROUPED/CS_PRINT_ARTICLES=’Y’) and (//DCRD_OKSQUOTE_GROUPED/LIST_G_CONTRACT/G_CONTRACT/CF_ARTICLE_TYPE=’ONCALL’)?><?call:OnCallArticle?><?end if?><?section:force-page-count;'end-on-even-layout'?><?section:xdofo:blank-on;'even-skip-page-count'?>
    The version that works is:
    <?call:OnCallArticle?><?section:force-page-count;'end-on-even-layout'?><?section:xdofo:blank-on;'even-skip-page-count'?>
    Appreciate all the help.
    TIA,
    Alka

    Just before the end of your for-each loop make a call to a sub-template
    Your sub-template will have the terms and conditions.
    regards
    Jorge

  • Unable to print all the terms and conditions pages in the PO.

    Reqt: The PO includes terms and conditions as the last page.
    Currently the program only prints out the first page of the Terms and Conditions regardless if it is one or two pages.
    Only one page(image) is displaying in the last page of smartform.
    These terms and conditions pages are passing as graphics(images), We are passing the GRAPHICS under the TABLES Main Area in LAST page WINDOW.
    But only one page (image) is displaying, but not others.
    Can anyone help to solve the above issue.
    Regards,
    Kishore

    you can create your terms n condition texts in SO10(standard text). THEN
    If u r using smartform then do this:
    goto the general attributes of a text element. From the drop down menu, convert the text type to include text.
    The just as in read_text fm pass the parameters
    text name, text object, text id and language.
    Every thing will be handled automatically
    AND if its a sap script then:
    To include the contents of another text into the current text, use the INCLUDE control command. SAPscript still treats the text to be included as a separate text. The text is copied over only at the point at which the output is formatted.
    Thus the use of the INCLUDE command always ensures that the most current version of a text is included into the output, since the text is not read and inserted until the output is formatted.
    Syntax:
    /: INCLUDE name OBJECT o ID i LANGUAGE l PARAGRAPH p
    NEW-PARAGRAPH np
    You must specify the name of the text to be inserted. It can be up to 70 characters long. If the name of the text contains spaces, then you must enclose it in quotes as a literal value. You can, alternatively, specify the name via a symbol. All remaining parameters in the INCLUDE command are optional. If an optional parameter is not specified, then SAPscript uses default values as applicable for the calling environment.
    /: INCLUDE MYTEXT
    The text MYTEXT is included in the language of the calling text.
    /: INCLUDE MYTEXT LANGUAGE 'E' PARAGRAPH 'A1'
    The text with the name MYTEXT and the language E is included, regardless of the language of the calling text. The paragraph format A1 will be used as the standard paragraph type for this call.
    Optional parameters:
    u2022 LANGUAGE
    If this parameter is not specified, then the language of the calling text or the form language are used for the text to be included. If the language is specified, then the text will be fetched in this language, regardless of the language of the calling text.
    u2022 PARAGRAPH
    The text to be included is formatted using the style allocated. The PARAGRAPH parameter can be used to redefine the standard paragraph for this style for the current call. All *-paragraphs in the included text will then be formatted using the paragraph specified here.
    u2022 NEW-PARAGRAPH
    The first line of the text to be included will be given this format indicator, as long as it is not a comment or command line. If the optional PARAGRAPH parameter (see above) is not specified, then all *-paragraphs of the included text will also be formatted using the paragraph specified in the NEW-PARAGRAPH command.
    u2022 OBJECT
    In order to completely specify a text, information about the text object is also required. There are a number of restrictions and other rules that depend on the object type of the calling text:
    o Any kind of text can be included in a form. If no object is specified, then TEXT will be used (standard texts).
    o In the case of a document text (DOKU object), you can include only document texts. This object type is also assumed if no object is specified in this environment.
    o Only hypertexts and document texts can be included in a hypertext (DSYS object). If the OBJECT parameter is missing, then DSYS is used as the default value.
    o In the other kinds of text you can include only standard texts (TEXT object), document texts or hypertexts. If there is no specification, then the default object is TEXT.
    u2022 ID
    The text ID is a part of the text key, which permits further text objects within a given object. If no ID is specified, then the default include ID is used from the TTXID table for the calling text. If there is no entry in this table, then the text ID of the calling text is used.
    The following consistency check is applied both to the ID and the object:
    u2022 All text IDs are allowed in a form.
    u2022 In document texts, only document texts may be included that have text IDs TX (general texts) or UO (authorization objects) and also other document texts with the same text ID as the calling document text.
    u2022 In DSYS texts, all DSYS texts can be included, whatever ID they have. Document texts to be included must have one of the IDs TX or UO.
    u2022 Into the other texts, standard texts with any allowable text ID, DSYS texts with all IDs, and document texts with the IDs TX and UO can be included.
    The INCLUDE command returns a status code in the SAPSCRIPT-SUBRC symbol:
    u2022 0: the text include was successful.
    u2022 1: the command could not be executed because it contained syntax errors.
    u2022 2: the rules governing the text to be included were not followed (see above).
    This value cannot occur if the command is used in a SAPscript form.
    u2022 4: the specified text could not be found.
    Once you define the standard text in SO10 you can include text by the above process or use the function module read_text:
    .............IN Smartform.......
    CALL FUNCTION 'READ_TEXT'
    EXPORTING
    CLIENT = SY-MANDT
    id =
    language =
    name =
    object =
    ARCHIVE_HANDLE = 0
    LOCAL_CAT = ' '
    IMPORTING
    HEADER =
    tables
    lines = i_tab
    EXCEPTIONS
    ID = 1
    LANGUAGE = 2
    NAME = 3
    NOT_FOUND = 4
    OBJECT = 5
    REFERENCE_CHECK = 6
    WRONG_ACCESS_TO_ARCHIVE = 7
    OTHERS = 8
    So you want to know how get the parametrs right. This is how"
    In SO10 goto goto menu -> header
    here u will find all the required parametrs.
    The text lines will be returned in the i_tab.
    U can loop at this itab and display the data.
    Reward points if hepful.

Maybe you are looking for