Adobe Form's First Page printing perfectly on 132 column sheet but further pages prints with small font size

Dear All,
We are facing a strange behavior of adobe form.
we made form for SAP CRM which is printing in 132 column(28cm * 33cm) sheet. what we are observing is, first page is printing perfectly on the pre printed Invoice sheet but if invoice has more items to be displayed then second  page prints with small font size or you can say second page seems to be zoomed out to smaller page size. In Preview Second page onwards also looks perfect. Now we are in a fix what to do to come out of this issue.
efforts made:-
Adobe Page Size Adjusted.
Select paper Source by Page Size ticked in Adobe form properties
But still result is non satisfactory. Please Help.
Regards,
Ashkar Rizvi

See my answers below:
a) The size of the pages of PDF which you are printing. LETTER
b) Does all pages of the PDF are of same size? YES
c) What is the page size set in the Printer and what is the actual size of the paper which you have put in the tray? LETTER
d) Does this problem also happens on the virtual printer which you might have on your system (Try either Microsoft MPS Document writer or Adobe PDF Printer) No VIRTUAL PRINTERS
Thank you for attempting to help me with this... we have tried everything and haven't been able to resolve the problem.
Sherri

Similar Messages

  • Adobe form only first page is displayed

    hi all,
    I have created two pages under the Master page but only the First page is getting displayed. Both are set to visible. Whatelse could be the reason. Thanks.
    Regards,
    FS

    Hi,
    Can you please elaborate more on this. Have you added 2 body pages or 2 master pages?
    If you have added 2 body pages and if they are empty then they wont get displayed. You will have to insert a subform into the page. Only then you would be able to see the extra two pages.
    Thanks,
    Radhika

  • Adobe form title won't print in BOLD font

    Hi Gurus,
    When creating an adobe form, I used the standard PM form interface and created my own form design.  I have a problem with the form title which should appear in the header of my page as it currently does.  The problem is that I can't change the font size or format (I can change it but the format isn't reflected in the output).  It is a bound read only text field using the field TITLE_PAGE-TITLE imported by the standard interface.
    Is it not possible to format bound fields?  I have some text fields which are static and the bold formatting works fine.
    Regards,
    Simon

    I see no one has answered, it may have been a stupid question.  I've realised that it is obviously possible and very simple but I've had problems with activation.  For some reason every time I activate and test the form with real data it reverts to a former version, this is why my text wasn't appearing in bold.  The only way I have been able to get around this problem is by downloading the form, deleting it in SAP and then uploading it again, a bit of a pain but it works.
    If anyone has any ideas on what the prob could be I would appreciate any answers,.
    Regards,
    Simon

  • How to configure adobe forms in OMLV for printing picking slip

    Hello,
    I want to configure a adobe form in OMLV transaction. But there is no column for putting adobe forms.
    Can you tell me how do configure adobe forms for getting it printed from standard transaction whenever a transfer order is created.
    Thanks in advance.

    Hi Ajay,
    You are completely right that you cannot find anything with smartform in the customizing (OMLV). The reason for it: It is not there. It not even exists. Also the latest version of rlvsdr40 has nothing standard concerning smartforms.
    I do not know why it is really necessary to use adobe or smartforms.
    The only way is to build a new one (ZRLVSDR40). In that new one you have to use the sapscriptname (from OMLV)and treat it as a smartform- name.
    I hope my explanation helps. Success.
    Gr., Frank
    Below how a smartform is called (from invoice)
    determine smartform function module
      CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING
          formname           = lf_formname
        IMPORTING
          fm_name            = lf_fm_name
        EXCEPTIONS
          no_form            = 1
          no_function_module = 2
          OTHERS             = 3.
      IF sy-subrc <> 0.
      error handling
        retcode = sy-subrc.
        IF sy-subrc = 1.
          MESSAGE e001(ssfcomposer).
        ENDIF.
        IF sy-subrc = 2.
          MESSAGE e002(ssfcomposer) WITH lf_formname.
        ENDIF.
        PERFORM protocol_update.
      ENDIF.
      CALL FUNCTION lf_fm_name
        EXPORTING
          archive_index        = toa_dara
          archive_parameters   = arc_params
          control_parameters   = ls_control_param
          mail_recipient       = ls_recipient
          mail_sender          = ls_sender
          output_options       = ls_composer_param
          user_settings        = ' '
          is_nast              = nast
          is_vbdka             = vbdka
          is_addres            = addr_key
        IMPORTING
          document_output_info = document_output_info
          job_output_info      = job_output_info
          job_output_options   = job_output_options
        TABLES
          it_vbdpa             = tvbdpa    "Item information
          it_vbdpau            = tvbdpau   "Subitem numbers
        EXCEPTIONS
          formatting_error     = 1
          internal_error       = 2
          send_error           = 3
          user_canceled        = 4
          OTHERS               = 5.

  • Printer prining emails with small fonts.

    I have a 1st generation power pc mac mini. I am operating Tiger 10.4.11. When I print emails, the font size is very small. Printing off the web or any other software, the font size is normal. How do I increase the font size on my emails when I print?

    Thanks,
    I did try your suggestion. I have resolved my issue. When selecting print, there is a option that says copies and pages. I opened that window and selected mail. After selecting mail, I selected keep the same apparent font size. Not sure how it was originally changed, but I suspect one of my three kids were playing around.
    Thanks for the help.

  • Report viewer is not printing the exact font size format if the application is run through virtual machine or RDP.

    Hi good day!,
    I'm still having this problem with the font size format of my report, although I already installed this hotfix at http://support.microsoft.com/kb/2768741/en-us, if I run the application using RDP or virtual machine. Anyway, I'm using VS2010 with sql server
    2012 express through windows 7. Actually, I tried to search for a new and updated hotfix version but having no luck,:) since i'm not good at it (google search).:)
    So, I need help on how to fix this problem.
    Your help will be greatly appreciated.
    Thanks!
    Hardz

    Hi JJorheim,
    Thanks for the link that you had given. Actually, Previewing the report on an RDP or VM environment is not a problem at all because it yields smooth result based on the report design. The problem only exist if print button icon of the report viewer is pressed
    which results to a magnified font size printout. I think it is a rendering problem a somewhat default behavior of a report viewer print method. So one of the remedy is to adjust the resolution of an RDP or VM to 1024x768
    (4:3 ratio) as suggested by the others, which momentarily solve this problem but not necessarily the other way around.
    Anyway, thanks again for the reply.
    Hardz

  • ADOBE form how to not print a page runtime

    Hi all
    I made a adobe form in sfp; it has a fixed number of page (30), each other differents (so not used the pageset, but each page is a subform). Depending by some conditions (the existance of a field value) the page must be print\displayed or not. I tried to use the script using the property presence and relevance applied to each subform inizialize event, but this hide the graphics and the fields not the page himself, so I will print anyway a blank page. Exist a mode for make disappears also the page and not only the content of same.
    thanks
    Davide

    hi,
    Page is nothing but a subform. like u hide a subform on a page. you can also hide the page itself by using the presence property.
    instead of hiding the individual subforms. hide the page as complete.
    it works. i have tried it.
    Regards,
    sakshi

  • Dynamic page length in Adobe Forms for paper roll printing

    Hi gurus,
    I have a requirement to create an invoice printout using a thermal printer with paper roll feed. Depending on the number of line items I have on my document the page could grow to an indefinite length. Is this something we could achieve using Adobe forms and ABAP?
    Cheers,
    Marc

    In the end we just added a second page and expanded the content area up to the borders of the page. This produces quite a gap in the paper in between pages but we were able to eliminate it thru the use of the printer's paper back-feed commands.

  • When I print a pdf file, the first page is dramatically  reduced in size while remainder pages print correct size. How do I fix this pro blem?

    recently, when printing pdf files, the first page prints out as 1/10 or 1/20th original size while rest of document prints correctly.
    I have no idea how this happened or why and I have no idea how to fix. I cannot get the first page of any pdf doocument to
    print correctly and thus, I am virtually unable to print pdf files.

    Sometimes if a .pdf is smaller than actual 8 1/2 x 11 or bigger, you'll either get way too much of the image and it's cut off, or the image is too small. You should also try to do this in the print driver window: Properties -> Advanced -> Image Options -> Disable "PostScript pass-through"

  • Adobe Form - non-Interactive Pdf Print - Access to table cell

    Hi experts
    I am new to Adobe Print Form (non-interactive flowed form) and I am desparately need your help.
    I am merging table data from a context into a table on a form layout and then use function call to generate a print form and send it out as an email. Sofar, everything works fine - except one of the requirement that if , on any row, a cell value in column 1 > 5 (i.e. example), set the font color to red.
    I tried all sort of ways (in JavaScript) - but cannot get hold of the cell to check the value. Please show me
    1) how to get to the cell in Javascript
    2) in What event that I must place the Javascript in
    At the moment, I have the form layout as followed:
    Data
    | Report
    | | Table1
    | | | Header
    | | | | ...........H_Fd1
    | | | | ...........H_Fd2
    | | | Row
    | | | | ...........R_Fd1
    | | | | ...........R_Fd2
    etc...
    There are no reference to "table" object in Adobe lc designer - If you have please also send me some
    Thanks
    Points will be rewarded for any reply.

    Hi
      JS to fetch a the value of a field in a table is
    xfa.resolveNode("form_name.subform_name.table_name.Row1["Row Index"].column_name[0]").rawValue;
    You can write the code in the exit or validate event of the second column
    Thanks
    Gopal

  • ADOBE FORM: Start new page at subform

    Hello,
    in the interface of my adobe form i have a table.
    I created a subform with binding to the table row.
    This works so far.
    But i want now that for each table row (= subform) a new page is started at the PDF.
    How could this be realised?
    Thank you
    Kind regards
    Manfred

    These can be done via options in Pagination tab for the "Body Row" of table.
    I just tried a sample as follows and it kind of worked.
    form1
    |-- Subform    // Object palette --> Subform tab --> Make its Content property to Flowed.
      |---- Table1
        |---- Row 1  
    // Object Palette --> Type is Body Row
    //  Object Palette --> Pagination --> After : Go To Next Page
    //  Object Palette --> Binding --> Selected Repeat Row for each Data Item and made its min count as 5
    Only thing is that I am getting a blank page at end but then may be this can point you in some direction and you will solve that for us

  • In printing web pages, why do pages following the first print in smaller font?

    When I print web pages, pages after the first print smaller font. Why?

    Try the '''''reset''''' described here: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer

  • SAP Adobe form getting error when printing QRCODE

    Dear experts,
    In my program i called Adobe forms.
    In the interface I pass below code
    DATA: lv_nl TYPE string,
           lv_n1 TYPE xstring,
           lv_t1 TYPE xstring,
           lv_tb TYPE string.
    lv_n1 = '13'.
    lv_t1 = '09'.
    BREAK-POINT.
    CALL FUNCTION 'CACS_CONVERT_HEX_TO_STRING'
       EXPORTING
         xstring = lv_n1         " <== Your value here
       IMPORTING
         cstring = lv_nl.
    CALL FUNCTION 'CACS_CONVERT_HEX_TO_STRING'
       EXPORTING
         xstring = lv_t1           " <== Your value here
       IMPORTING
         cstring = lv_tb.
    CONCATENATE gv_sc gv_po1 gv_pa1 lv_nl gv_in1 lv_tb gv_exdat.
    I am getting an error
    Exception       SYSTEM_ERROR
    Message ID:          FPRUNX                     Message number:           001
    Message:
    ADS: com.adobe.ProcessingException: com.adobe.Processin(200101)
    Kindly check and suggest me .
    Gopi

    Hi Gopi,
    Looks like your ADS service is down. Contact your Basis Team.
    Run program FP_TEST_03 to verify the ADS service.
    Refer to thread
    http://scn.sap.com/thread/224489
    Regards
    Sandy

  • Report's First Page Start with a specified page number.

    I want that my first page of the report should start by a number whixh i want. Say the PageNo on the first page is 32 and it will proceed as 33, 34, 35 ....so on.
    What to do?

    hello,
    you can modify the starting value for the page number by using the "Page Numbering" property of your page number field. there you can define where you want your page numbers to start.
    regards,
    ph.

  • Fillable fileds are printing with garbage font, rest of form prints fine.

    I've downloaded an application to be filled out and printed. When I print the application, I get some garbage in the fields that I filled out. The rest of the application looks fine. The whole thing looks great on the screen, I just can't print it.
    Thank you

    One re ing.
    If I choose the "Adode PDF" printer. The document prints the garbled font, and the fillable fields print fine.....

Maybe you are looking for

  • For two months, Telstra have failed to help me. What should I do?

    Hello everyone. I feel as though I need to inform people about this and get some advice on what to do. I've been trying to resolve it with Telstra for months but they really aren't interested. Here's what's happened: Our household wants to upgrade fr

  • How to create a tree in table?

    How to create a tree in table?

  • Confirmation status "Currently being transferred"

    Hi, We are using Extended classic scenario in SRM 4.0 with SRM server 5.0. Some of the confirmations posted for the POs are in status Currently being transferred or Error in process. We need to delete some of those confirmations but we the Delete and

  • Multiple clients, same sys id

    I have a situation where I would like several SAP clients with the same system IDs (on different hosts) to address the same AD service (on a single java host). The problem of course that is the connection FP_ICF_DATA_<SID> can only address one client

  • CSCuo99477 - Arp stuck in Incomplete state

    Dear Cisco Support, For this bug, If we hit this bug unfortunately with using this version, is there any consequences? Will the machine's arp entry which showing "arp incomplete" in the core switch be disconnected or not working? What kind of situati