Adobe form - Split internal table data & dis on the right and left corner
HI ,
I have a form where i am populating the data via an Internal Table.
The concern i have is i have 100 rows in the table and i want to print the first 10 rows on the right hand side of the page and the next 10 rows on the Left hand side of the page. I want to do this dynamically on multiple pages during run time based on the volume of data in the internal table.
I am sure i cannot dynamically change the interface of the form to allow multiple internal table , Please suggest if there is any other solution.
Thanks in advance
Tk
Edited by: tarunk on Jan 16, 2012 5:56 PM
Hi,
Thank you very much for the input, But my concern is
I have a table with 120 records.
i have three columns which i have it on the right side as well as on the Left side of the page.
EX:
Right Side Left Side
Col1 col2 col3 col1 col2 col3.
Now what i want to do is the first ten rows of the internal table data i want to print it on the Right Side and the Next 10 rows on the Left Side in the same page .
I want to do this on Multiple pages.
please suggest.
Thanks,
Tk
Similar Messages
-
Downloaded data in Excel from SAP table data to have the macro and control?
We know that in SE16 screen to display SAP table data, there is a menu item or button to download the table data to excel sheet, but in the excel sheet, the data is for display only and some calculation functions (e.g. sum) are not be able to be downloaded to the excel sheet as macro.
Our customers would like us to see if there is a way that in the excel sheet with the download SAP table data, only some certain rows/columns of data are allowed to be changed by customers or in other words, other areas in the excel sheet should be frozen and users can not even insert a column and do the copy/paste rows/columns. And also the original calculated column in SAP table (e.g., sum) would be in the corresponding column in the excel sheet, but with macro to do the same function (e.g., sum). After the customers perform some changes in some allowed certain rows/columns in the excel file, then the changed data can be uploaded back to SAP.
Wonder if there are such ABAP program to fullfill the above task to download SAP table data to an excel file and to make the downloaded data in the excel with only some certain row/columns to be changeable and all other areas frozen?
Thanks and we will give you reward points for valuable answers!Hi,
This scenario can be met with the FM : RH_START_EXCEL_WITH_DATA
This is available in Older versions. Starts Excel with a macro.
I have never tried using this FM.
However, I came across : http://www.jt77.com/development1/programming-23850.html
Showing the use of it.
To get useful hints, also refer :
1) Transaction : DWDM
2) MS EXCEL as OLE Client :
http://help.sap.com/saphelp_nw04/helpdata/en/40/b297f3c32711d194ac00a0c94260a5/frameset.htm
3) Read the content at any table + Defined Macros used to call Function Modules
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c043d836-166c-2910-b99e-ae3633dec547
Once you get a solution, would appreciate a mail to me @ <REMOVED BY MODERATOR>
Cheers,
Remi
Edited by: Alvaro Tejada Galindo on Feb 29, 2008 5:41 PM -
Issue In internal table data population in the o/p
Dear Guru , I have encountered an issue for which i am not able to findout the logic . I have an internal table through which i am populating the below data for detail report format :->
Plant Material Number Storage Loc Movement Type Avg Days
019 0820B0073 MOD3 101 space
019 0820B0073 MOD3 101 space
019 0820B0073 MOD3 101 space
019 0820B0073 MOD3 101 space
019 0820B0073 MOD3 101 space
020 0820B0074 MOD4 101 space
020 0820B0074 MOD4 101 2
020 0820B0074 MOD4 101 3
The requirment is like this the summary report should show o/p like below addition of all the rows with respect to plant , material, storage location and movement type :-
Plant Material Number Storage Loc Movement Type Avg Days
019 0820B0073 MOD3 101 space
020 0820B0074 MOD4 101 5
but when i am adding it with respect to plant, material, storage location and movement type the o/p i am getting is like below
Plant Material Number Storage Loc Movement Type Avg Days
019 0820B0073 MOD3 101 0
020 0820B0074 MOD4 101 5
becasue addition of 5 spaces ( Avg Days )of plant 019 is coming as ZERO --> 0
so Guru what logic i should use to get the proper o/p,..I have Used Following logic to perform summation with respect to plant, material , storage loc and movement type.
CLEAR: wa_mkpf_mseg, w_werks, w_matnr, w_lgort, w_bwart.
LOOP AT t_mkpf_mseg INTO wa_mkpf_mseg.
IF wa_mkpf_mseg-werks EQ w_werks AND wa_mkpf_mseg-matnr EQ w_matnr AND wa_mkpf_mseg-lgort EQ w_lgort AND wa_mkpf_mseg-bwart EQ w_bwart.
CLEAR: wa_p_coi.
READ TABLE t_p_coi INTO wa_p_coi WITH KEY werks = wa_mkpf_mseg-werks matnr = wa_mkpf_mseg-matnr lgort = wa_mkpf_mseg-lgort bwart = wa_mkpf_mseg-bwart.
IF sy-subrc = 0.
wa_p_coi-Avg Days = wa_p_coi-Avg Days + wa_mkpf_mseg-Avg Days.
MODIFY t_p_coi FROM wa_p_coi TRANSPORTING Avg Days .
CLEAR: wa_p_coi, wa_p_coi.
endif.
ELSE.
wa_p_coi-werks = wa_mkpf_mseg-werks.
wa_p_coi-matnr = wa_mkpf_mseg-matnr.
wa_p_coi-bwart = wa_mkpf_mseg-bwart.
wa_p_coi-lgort = wa_mkpf_mseg-lgort.
wa_p_coi-Avg Days = wa_mkpf_mseg-Avg Days .
APPEND wa_p_coi TO t_p_coi.
CLEAR: wa_p_coi.
ENDIF.
w_werks = wa_mkpf_mseg-werks.
w_matnr = wa_mkpf_mseg-matnr.
w_lgort = wa_mkpf_mseg-lgort.
w_bwart = wa_mkpf_mseg-bwart.
CLEAR: wa_mkpf_mseg.
ENDLOOP.The soln what i found after working out
CLEAR: wa_mkpf_mseg, w_werks, w_matnr, w_lgort, w_bwart.
LOOP AT t_mkpf_mseg INTO wa_mkpf_mseg.
IF wa_mkpf_mseg-werks EQ w_werks AND wa_mkpf_mseg-matnr EQ w_matnr AND wa_mkpf_mseg-lgort EQ w_lgort AND wa_mkpf_mseg-bwart EQ w_bwart.
CLEAR: wa_p_coi.
READ TABLE t_p_coi INTO wa_p_coi WITH KEY werks = wa_mkpf_mseg-werks matnr = wa_mkpf_mseg-matnr lgort = wa_mkpf_mseg-lgort bwart = wa_mkpf_mseg-bwart.
IF sy-subrc = 0.
if wa_p_coi-Avg Days = ' ' and wa_mkpf_mseg-Avg Days = ' '.
wa_p_coi-Avg Days = ' '.
ELSE
wa_p_coi-Avg Days = wa_p_coi-Avg Days + wa_mkpf_mseg-Avg Days.
Endif.
MODIFY t_p_coi FROM wa_p_coi TRANSPORTING Avg Days .
CLEAR: wa_p_coi, wa_p_coi.
endif.
ELSE.
wa_p_coi-werks = wa_mkpf_mseg-werks.
wa_p_coi-matnr = wa_mkpf_mseg-matnr.
wa_p_coi-bwart = wa_mkpf_mseg-bwart.
wa_p_coi-lgort = wa_mkpf_mseg-lgort.
wa_p_coi-Avg Days = wa_mkpf_mseg-Avg Days .
APPEND wa_p_coi TO t_p_coi.
CLEAR: wa_p_coi.
ENDIF.
w_werks = wa_mkpf_mseg-werks.
w_matnr = wa_mkpf_mseg-matnr.
w_lgort = wa_mkpf_mseg-lgort.
w_bwart = wa_mkpf_mseg-bwart.
CLEAR: wa_mkpf_mseg.
ENDLOOP. -
Internal table data 1E2 automatically convert to scientific format
Dear all,
I have been searched for solution moths from the forums and tried all possible methods, but still no way to solve my above problem. I found a way to solve it partially for us, but may be very helpful for others who meet similly case like mine, so I posted here.
my problem is when I export my internal table data to Excel, the Cell data with 1E2 auto becomes 1.00E02, and 1E8 becomes 1.00E08, we need it to be 1E2 and 1E8 in excel.
you can recreate my problem by
1, input 1E2 into your Microsoft Excel, then Enter, it will auto change into scientific format. which is we do not want.
2, use any of your SAP system open any table as long as there is a Char (>3) field in that table. add some
data entry in that field in the form "any amount (<15) of numeric 1 to 9"E"any one or two numeric 1 to 9". such as, 123E2, 1234E12 etc. then save this table's data to local file spread sheet, or use any FM to download it to a Excel file, when you open this
file by Excel, the cell with above form will display as scientific. but
if you put three or more numeric after the "E", such as 123E123 it will
display correctly.
what I have done:
I searched in SCN for similar thread:
Export to Excel 2007 - item number problem
Exceding the limit of numbers in Excel at target side
Excel download cell format problem
Formating as Text in excel through SAP
Converting of amount field into excel file through GUI DOWNLOAD
Data downloaded to excel gets converted to exponential format.
Problem with Excel download and scientific number
Re: Issue in displaying numbers in Excel?
CSV Flat File Data Problem (Number converting to Scientific Notation)
Tested accordingly, But none of these works in our case. because our
ultimate receiver of email attachment will be external third party, we cannot ask
them to change anything in their Excel.
Search Microsoft help about Excel, http://support.microsoft.com/kb/214233,
and it says this "Automatic Number Formatting" is a normal behaviour of excel.
no way to turn it off, the "work-around" way that Microsoft provides is not suitable for our
case.
We test CL_iXML recently arrording to weblog http://wiki.sdn.sap.com/wiki/display/Snippets/FormattedExcelasEmailAttachment
it successful controled the format. so this could be a solution for others whose internal table size is small. but our 2MB internal table bocome 6MB when converted to xml file attachment, which cannot be received by our end user's mail box. too big.
So please advise your ideas.
Many thanks in advance!
Peter Ding
Thank you very much for your time!Hi,
You can achieve this by describing the spreadsheet in XML with the help of the DOM classes.
The later releases of Excel can read and save spreadsheets as XML, providing your release supports this you can achieve it.
Check out the following Wiki
[Excel - XML|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/exporting%2bdata%2bto%2bexcel%2b-%2bxml%2bto%2bthe%2brescue]
Regards,
Darren -
Export & Import internal table data across the programs
Hi All,
I have two different reports,let say ZPRO1 & ZPRO2. I want to export internal table data of ZPRO1 to ZPRO2 and then I want to do some calculations in ZPRO2 with the imported internal table data(ZPRO1).
If I use 'SUBMIT' or CALL TRANSACTION syntax ZPRO1 is displaying..but I want to use only internal table data of ZPRO1.
Pls advise.
Pranitha.Hi,
Please follow the simple code and try to solve your issue.
Code in program1
types: begin of ty_itab,
matnr type matnr,
end of ty_itab.
data: it_itab type table of ty_itab,
wa_itab type ty_itab,
it_itab1 type table of ty_itab.
select matnr from mara into table it_itab.
export it_itab to shared buffer indx(st) id 'ABC'.
Code in program2
types: begin of ty_itab,
matnr type matnr,
end of ty_itab.
data: it_itab type table of ty_itab,
wa_itab type ty_itab.
import it_itab from shared buffer indx(st) id 'ABC'.
loop at it_itab into wa_itab.
write:/ wa_itab-matnr.
endloop.
Please delete shared buffer indx(st) id 'ABC', once we don't need the internal table data.
Regards
Dande -
New page in smart form when displaying internal table data in table
Hi ,
My requirement in smartform is like
I'm using the tables to display the internal table data in main window .
based on SORTF field in the internal table ,when SORTF field value changes all the related to that SORTF value should be displayind in the new page.
Please anybody tell me that , how to do this?
Thanks
NaveenHi Navi,
Try this Logic.
1) Go to Smartform,
2) Declare a flag variable w_flag type c
3)Go to Main Window
a) Go to table
b) Create one more Table Line
c) Create a CODE Line in that.
write inside CODE as Below:-
CLEAR: w_flag.
ON CHANGE OF w_final-sortf.
w_flag = 'X'.
ENDON.
d) Create one COMMAND Under CODE line created above.
click on check Box "Go to New Page" ( Page1 or Page2 or give as reqd ).
click on conditions tabe of COMMAND
write: w_flag = 'X'.
Hope this will work
Reward Points if Useful
regards
Avi............. -
Problem converting data in XML file to internal table data
Hi all,
I have a requirement. I need to convert an XML file to internal table data and based on that data do Goods Receipt in SAP.
With the help of this blog /people/r.eijpe/blog/2005/11/10/xml-dom-processing-in-abap-part-i--convert-an-abap-table-into-xml-file-using-sap-dom-approach
I am able to convert the XML file to data in SAP. But this blog will display the output on screen as ELELEMNT = nodename VALUE= value of that node.
But I donu2019t want in that way, I want to store all the data in XML file in an internal table so that I can make use of those values and do Goods Recipt in SAP.
Can some one suggest how should I read the data in an internal table.
Here is my code..what changes should I make?
*& Report z_xit_xml_check
REPORT z_xit_xml_check.
TYPE-POOLS: ixml.
TYPES: BEGIN OF t_xml_line,
data(256) TYPE x,
END OF t_xml_line.
DATA: l_ixml TYPE REF TO if_ixml,
l_streamfactory TYPE REF TO if_ixml_stream_factory,
l_parser TYPE REF TO if_ixml_parser,
l_istream TYPE REF TO if_ixml_istream,
l_document TYPE REF TO if_ixml_document,
l_node TYPE REF TO if_ixml_node,
l_xmldata TYPE string.
DATA: l_elem TYPE REF TO if_ixml_element,
l_root_node TYPE REF TO if_ixml_node,
l_next_node TYPE REF TO if_ixml_node,
l_name TYPE string,
l_iterator TYPE REF TO if_ixml_node_iterator.
DATA: l_xml_table TYPE TABLE OF t_xml_line,
l_xml_line TYPE t_xml_line,
l_xml_table_size TYPE i.
DATA: l_filename TYPE string.
PARAMETERS: pa_file TYPE char1024 DEFAULT 'c:\temp\orders_dtd.xml'.
Validation of XML file: Only DTD included in xml document is supported
PARAMETERS: pa_val TYPE char1 AS CHECKBOX.
START-OF-SELECTION.
Creating the main iXML factory
l_ixml = cl_ixml=>create( ).
Creating a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
PERFORM get_xml_table CHANGING l_xml_table_size l_xml_table.
wrap the table containing the file into a stream
l_istream = l_streamfactory->create_istream_itable( table = l_xml_table
size = l_xml_table_size ).
Creating a document
l_document = l_ixml->create_document( ).
Create a Parser
l_parser = l_ixml->create_parser( stream_factory = l_streamfactory
istream = l_istream
document = l_document ).
Validate a document
IF pa_val EQ 'X'.
l_parser->set_validating( mode = if_ixml_parser=>co_validate ).
ENDIF.
Parse the stream
IF l_parser->parse( ) NE 0.
IF l_parser->num_errors( ) NE 0.
DATA: parseerror TYPE REF TO if_ixml_parse_error,
str TYPE string,
i TYPE i,
count TYPE i,
index TYPE i.
count = l_parser->num_errors( ).
WRITE: count, ' parse errors have occured:'.
index = 0.
WHILE index < count.
parseerror = l_parser->get_error( index = index ).
i = parseerror->get_line( ).
WRITE: 'line: ', i.
i = parseerror->get_column( ).
WRITE: 'column: ', i.
str = parseerror->get_reason( ).
WRITE: str.
index = index + 1.
ENDWHILE.
ENDIF.
ENDIF.
Process the document
IF l_parser->is_dom_generating( ) EQ 'X'.
PERFORM process_dom USING l_document.
ENDIF.
*& Form get_xml_table
FORM get_xml_table CHANGING l_xml_table_size TYPE i
l_xml_table TYPE STANDARD TABLE.
Local variable declaration
DATA: l_len TYPE i,
l_len2 TYPE i,
l_tab TYPE tsfixml,
l_content TYPE string,
l_str1 TYPE string,
c_conv TYPE REF TO cl_abap_conv_in_ce,
l_itab TYPE TABLE OF string.
l_filename = pa_file.
upload a file from the client's workstation
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
filename = l_filename
filetype = 'BIN'
IMPORTING
filelength = l_xml_table_size
CHANGING
data_tab = l_xml_table
EXCEPTIONS
OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Writing the XML document to the screen
CLEAR l_str1.
LOOP AT l_xml_table INTO l_xml_line.
c_conv = cl_abap_conv_in_ce=>create( input = l_xml_line-data replacement = space ).
c_conv->read( IMPORTING data = l_content len = l_len ).
CONCATENATE l_str1 l_content INTO l_str1.
ENDLOOP.
l_str1 = l_str1+0(l_xml_table_size).
SPLIT l_str1 AT cl_abap_char_utilities=>cr_lf INTO TABLE l_itab.
WRITE: /.
WRITE: /' XML File'.
WRITE: /.
LOOP AT l_itab INTO l_str1.
REPLACE ALL OCCURRENCES OF cl_abap_char_utilities=>horizontal_tab IN
l_str1 WITH space.
WRITE: / l_str1.
ENDLOOP.
WRITE: /.
ENDFORM. "get_xml_table
*& Form process_dom
FORM process_dom USING document TYPE REF TO if_ixml_document.
DATA: node TYPE REF TO if_ixml_node,
iterator TYPE REF TO if_ixml_node_iterator,
nodemap TYPE REF TO if_ixml_named_node_map,
attr TYPE REF TO if_ixml_node,
name TYPE string,
prefix TYPE string,
value TYPE string,
indent TYPE i,
count TYPE i,
index TYPE i.
node ?= document.
CHECK NOT node IS INITIAL.
ULINE.
WRITE: /.
WRITE: /' DOM-TREE'.
WRITE: /.
IF node IS INITIAL. EXIT. ENDIF.
create a node iterator
iterator = node->create_iterator( ).
get current node
node = iterator->get_next( ).
loop over all nodes
WHILE NOT node IS INITIAL.
indent = node->get_height( ) * 2.
indent = indent + 20.
CASE node->get_type( ).
WHEN if_ixml_node=>co_node_element.
element node
name = node->get_name( ).
nodemap = node->get_attributes( ).
WRITE: / 'ELEMENT :'.
WRITE: AT indent name COLOR COL_POSITIVE INVERSE.
IF NOT nodemap IS INITIAL.
attributes
count = nodemap->get_length( ).
DO count TIMES.
index = sy-index - 1.
attr = nodemap->get_item( index ).
name = attr->get_name( ).
prefix = attr->get_namespace_prefix( ).
value = attr->get_value( ).
WRITE: / 'ATTRIBUTE:'.
WRITE: AT indent name COLOR COL_HEADING INVERSE, '=',
value COLOR COL_TOTAL INVERSE.
ENDDO.
ENDIF.
WHEN if_ixml_node=>co_node_text OR
if_ixml_node=>co_node_cdata_section.
text node
value = node->get_value( ).
WRITE: / 'VALUE :'.
WRITE: AT indent value COLOR COL_GROUP INVERSE.
ENDCASE.
advance to next node
node = iterator->get_next( ).
ENDWHILE.
ENDFORM. "process_dom
Any help would be highly apperciated.
regards,
Jessica SamPavel Vera,
With your example i tries doing the following .....
I tried to convert the data of XML file to internal table data. I am collecting the data in internal table to do goos recipt with that data.
Please find my XML file, ABAP pgm and XSLT pgm . I donu2019t know what I am missing I am not getting any output. I donu2019t know what is wrong please help me with this
Below is my XML file, My code and XSLT Program. In the below XML file I need to collect Vendor Number, Order Number, and Date tags which occur only once for one XML file.
I also need to collect the following tags from <Shipmentdetail>
<Shipmentdetail> has following child nodes and I need to collect them
TrackingNumber
Freight
Weight
ShipmentDate
ShipmentMethod
Need to collect to collect the following tags from <ProductInformation>
<ProductInformation> has following child nodes and I need to collect them
LineNumber
SKUNumber
OrderedQuantity
ShippedQuantity
UOM
The <Shipmentdetail> and <ProductInformation> are child nodes of <OrderShipment>
The <Shipmentdetail> occurs only ones but the <ProductInformation> can occur once or many times and will be dynamic and differs depening on the input file.
My XML file is as follows
<?xml version="1.0" encoding="iso-8859-1" ?>
- <ShipmentHeader>
<AccountID />
- <OrderShipment>
<VendorNumber>1000</VendorNumber>
<OrderNumber>P00009238</OrderNumber>
<OrderType>Stock</OrderType>
<Company />
<Division />
<Department />
<Date>20061120</Date>
<CartonCount>2</CartonCount>
<ShipAllProducts>No</ShipAllProducts>
- <ShipmentDetail>
<TrackingNumber>1ZR3W891PG47477811</TrackingNumber>
<Freight>000000010000</Freight>
<ShipmentDate>20061120</ShipmentDate>
<ShipmentMethod>UPS1PS</ShipmentMethod>
</ShipmentDetail>
- <ProductInformation>
<LineNumber>000000001</LineNumber>
<SKUNumber>110FR</SKUNumber>
<AdvSKUNumber>003 4518</AdvSKUNumber>
<SKUID />
<OrderedQuantity>00000001000000</OrderedQuantity>
<ShippedQuantity>00000001000000</ShippedQuantity>
<UOM>EA</UOM>
<Factor>1</Factor>
</ProductInformation>
- <ProductInformation>
<LineNumber>000000002</LineNumber>
<SKUNumber>938EN</SKUNumber>
<AdvSKUNumber>001 7294</AdvSKUNumber>
<SKUID />
<OrderedQuantity>00000000450000</OrderedQuantity>
<ShippedQuantity>00000000450000</ShippedQuantity>
<UOM>EA</UOM>
<Factor>1</Factor>
</ProductInformation>
- <CaseInformation>
<LineNumber>000000001</LineNumber>
<SKUNumber>110FR</SKUNumber>
<AdvSKUNumber>003 4518</AdvSKUNumber>
<SKUID />
<SSCCNumber>00000001668000002487</SSCCNumber>
<CaseQuantity>00000001000000</CaseQuantity>
<UOM>EA</UOM>
<Factor>1</Factor>
</CaseInformation>
<CaseInformation>
<LineNumber>000000001</LineNumber>
<SKUNumber>110FR</SKUNumber>
<AdvSKUNumber>003 4518</AdvSKUNumber>
<SKUID />
<SSCCNumber>00000001668000002487</SSCCNumber>
<CaseQuantity>00000001000000</CaseQuantity>
<UOM>EA</UOM>
<Factor>1</Factor>
</CaseInformation>
- </OrderShipment>
</ShipmentHeader>
My Program
TYPE-POOLS abap.
CONSTANTS gs_file TYPE string VALUE 'C:\temp\test.xml'.
* This is the structure for the data from the XML file
TYPES: BEGIN OF ts_shipment,
VendorNumber(10) TYPE n,
OrderNumber(20) TYPE n,
OrderType(8) TYPE c,
Date(8) TYPE c,
END OF ts_shipment.
TYPES: BEGIN OF ts_shipmentdetail,
TrackingNumber(30) TYPE n,
Freight(12) TYPE n,
Weight(14) TYPE n,
ShipmentDate(8) TYPE c,
ShipmentMethod(8) TYPE c,
END OF ts_shipmentdetail.
TYPES: BEGIN OF ts_productinformation,
LineNumber(9) TYPE n,
SKUNumber(20) TYPE c,
OrderedQuantity(14) TYPE n,
ShippedQuantity(14) TYPE n,
UOM(4) TYPE c,
END OF ts_productinformation.
* Table for the XML content
DATA: gt_itab TYPE STANDARD TABLE OF char2048.
* Table and work ares for the data from the XML file
DATA: gt_shipment TYPE STANDARD TABLE OF ts_shipment,
gs_shipment TYPE ts_shipment.
DATA: gt_shipmentdetail TYPE STANDARD TABLE OF ts_shipmentdetail,
gs_shipmentdetail TYPE ts_shipmentdetail.
DATA: gt_productinformation TYPE STANDARD TABLE OF ts_productinformation,
gs_productinformation TYPE ts_productinformation.
* Result table that contains references
* of the internal tables to be filled
DATA: gt_result_xml TYPE abap_trans_resbind_tab,
gs_result_xml TYPE abap_trans_resbind.
* For error handling
DATA: gs_rif_ex TYPE REF TO cx_root,
gs_var_text TYPE string.
* Get the XML file from your client
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
filename = gs_file
CHANGING
data_tab = gt_itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
not_supported_by_gui = 17
error_no_gui = 18
OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "ISHIPMENT".
GET REFERENCE OF gt_shipment INTO gs_result_xml-value.
gs_result_xml-name = 'ISHIPMENT'.
APPEND gs_result_xml TO gt_result_xml.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "ISHIPDET".
GET REFERENCE OF gt_shipmentdetail INTO gs_result_xml-value.
gs_result_xml-name = 'ISHIPDET'.
APPEND gs_result_xml TO gt_result_xml.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "IPRODDET".
GET REFERENCE OF gt_productinformation INTO gs_result_xml-value.
gs_result_xml-name = 'IPRODDET'.
APPEND gs_result_xml TO gt_result_xml.
* Perform the XSLT stylesheet
TRY.
CALL TRANSFORMATION z_xml_to_abap3
SOURCE XML gt_itab
RESULT (gt_result_xml).
CATCH cx_root INTO gs_rif_ex.
gs_var_text = gs_rif_ex->get_text( ).
MESSAGE gs_var_text TYPE 'E'.
ENDTRY.
* Writing the data from file for gt_shipment
*Collecting the Shipping Data from the XML file to internal table gt_shipment
*and writing the data to the screen
LOOP AT gt_shipment INTO gs_shipment.
WRITE: / 'VendorNumber:', gs_shipment-VendorNumber.
WRITE: / 'OrderNumber :', gs_shipment-OrderNumber.
WRITE: / 'OrderType :', gs_shipment-OrderType.
WRITE: / 'Date :', gs_shipment-Date.
WRITE : /.
ENDLOOP. "gt_shipment.
LOOP AT gt_shipmentdetail INTO gs_shipmentdetail.
WRITE: / 'TrackingNumber:', gs_shipmentdetail-TrackingNumber.
WRITE: / 'Freight :', gs_shipmentdetail-Freight.
WRITE: / 'Weight :', gs_shipmentdetail-Weight.
WRITE: / 'ShipmentDate :', gs_shipmentdetail-ShipmentDate.
* WRITE: / 'ShipmentMethod :' gs_shipmentdetail-ShipmentMethod
WRITE : /.
ENDLOOP. "gt_shipmentdetail.
LOOP AT gt_productinformation INTO gs_productinformation.
WRITE: / 'LineNumber:', gs_productinformation-LineNumber.
WRITE: / 'SKUNumber :', gs_productinformation-SKUNumber.
WRITE: / 'OrderedQuantity :', gs_productinformation-OrderedQuantity.
WRITE: / 'ShippedQuantity :', gs_productinformation-ShippedQuantity.
WRITE: / 'UOM :', gs_productinformation-UOM.
WRITE : /.
ENDLOOP. "gt_productinformation.
XSLT Program
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output encoding="iso-8859-1" indent="yes" method="xml" version="1.0"/>
<xsl:strip-space elements="*"/>
<xsl:template match="/">
<asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
<asx:values>
<ISHIPMENT>
<xsl:apply-templates select="//OrderShipment"/>
</ISHIPMENT>
</asx:values>
</asx:abap>
</xsl:template>
<xsl:template match="OrderShipment">
<item>
<VENDORNUMBER>
<xsl:value-of select="VendorNumber"/>
</VENDORNUMBER>
<ORDERNUMBER>
<xsl:value-of select="OrderNumber"/>
</ORDERNUMBER>
<ORDERTYPE>
<xsl:value-of select="OrderType"/>
</ORDERTYPE>
<DATE>
<xsl:value-of select="Date"/>
</DATE>
</item>
</xsl:template>
<xsl:template match="/">
<asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
<asx:values>
<ISHIPDET>
<xsl:apply-templates select="//OrderShipment/ShipmentDetail"/>
</ISHIPDET>
</asx:values>
</asx:abap>
</xsl:template>
<xsl:template match="ShipmentDetail">
<item>
<TRACKINGNUMBER>
<xsl:value-of select="TrackingNumber"/>
</TRACKINGNUMBER>
<FREIGHT>
<xsl:value-of select="Freight"/>
</FREIGHT>
<SHIPMENTDATE>
<xsl:value-of select="ShipmentDate"/>
</SHIPMENTDATE>
<SHIPMENTMETHOD>
<xsl:value-of select="ShipmentMethod"/>
</SHIPMENTMETHOD>
</item>
</xsl:template>
</xsl:transform> .
Any help is highly appreciated. If anyone encountered this situation before please let me know where i am going wrong in my XSLT transformation.
Any Help will be highly apppreciated. Thanks in advance
Regards,
Jessica Sam -
Importing internal table data from FM to eCATT test script
Hi all,
I am working on Workflow project where by i need to post invoices related to purchase orders sent as scanned imaages. Incase all the data in the incoming invoice(scanned) is correct then i am using BAPI_INCOMING_INVOICE_CREATE to post the invoice.
But when the data is wrong, i need to give the user MIRO transaction pre-populated with the invoice details so that he manually corrects them(after verification) and posts the invoice.
I understand MIRO is an ENJOY transaction hence BDC doesn't work properly(i have tried with all kinds of options on recording and the problem comes incase of multiple POs) hence i choose to use eCATT.
The recording worksfine but my real problem is the PO data (multiple PO details for same invoice) is in table form. In all my previous objects related to eCATT we used to upload the file, hence no problem of importing tables.
But now as i'll call this test script from a function module which has all the POs in the form of internal table, i need to import this into my test script.
Please any body tell me how to proceed in this case or please suggest me a better a way to record the MIRO.
Thank you,
Lakshmi Narayana.SHello Raj,
First of all thank you for your inputs.
Yes, I know about Parking an invoice. even i am using it in some scenarios.
If everything on the invoice matches with the values in SAP then i am posting it using BAPI invoice_create also.
But for some scenarios like if the PO on the invoice doesnot match with actual PO then i need to create a work item in the Accounts Payable user's inbox and he will change invoice data manually (after getting confirmation and correction) and post it using MIRO.
Here i need to pre-populate the MIRO with the invoice data so that he can correct and post it.
Hence i was trying to write a BDC and as MIRO is an Enjoy transaction i thought writing a BDC is not a good idea (i tried writing BDC but had problems) hence i am using eCATT.
Hope i am clear about my problem. Any inputs to solve this are welcome.
Thanks,
Lakshmi Narayana.S -
Hi
I have a requirement of writing internal table data to XML. Any idea where i should start.
I have pretty good experience with ABAP and basic knowledge in XML.
There are good blogs which talk about transformations and other stuff but they are not able to give me clear path to my solution.
Could somebody give me a basic example or some reference material where i can move the data in internal table (assume Sales order details of a day) to XML.
ThanksRefer the program -
In this implementation we will only focus on the creation of the XML file and the transfer to the user. You can not create a XML document directly. You have to use a so called ixml factory first.
TYPE-POOLS: ixml.
DATA: l_ixml TYPE REF TO if_ixml.
l_ixml = cl_ixml=>create( ).
This iXML factory can create an empty XML document object named l_document.
DATA: l_document TYPE REF TO if_ixml_document.
l_document = l_ixml->create_document( ).
At this point you can add the nodes (elements, attributes) into the document. First you have to declare the root element node.
DATA: l_element_root TYPE REF TO if_ixml_element.
This node we have to give a name and add it (create_simple_node) to the document object l_document, which will be the parent of this node.
l_element_root = l_document->create_simple_element(
name = 'flights'
parent = l_document ).
Next we can add child nodes to there parent node using the same method of the document object.
DATA: l_element_airline TYPE REF TO if_ixml_element,
l_element_airline = l_document->create_simple_element(
name = 'airline'
parent = l_element_root ).
An attribute can be add easily using the method set_attribute of the element node.
l_rc = l_element_airline->set_attribute( name = 'code' value = 'LH401' ).
Now we have finished the document object. Regretfully it can not be displayed in any form due to the fact that it is a binary object.
The next step is to convert the created document to a flat file. To achieve this we have to create a stream factory, which will help us to create an output stream.
DATA: l_streamfactory TYPE REF TO if_ixml_stream_factory.
l_streamfactory = l_ixml->create_stream_factory( ).
In this case, we will convert the document into an output stream which is based on an internal table of type x.
TYPES: BEGIN OF xml_line,
data(256) TYPE x,
END OF xml_line.
DATA: l_xml_table TYPE TABLE OF xml_line,
l_xml_size TYPE i,
l_rc TYPE i,
l_ostream TYPE REF TO if_ixml_ostream.
l_ostream = l_streamfactory->create_ostream_itable( table = l_xml_table ).
When we have created the output stream we can do the rendering from the document into the stream. The XML data will be stored in the internal table automatically.
DATA: l_renderer TYPE REF TO if_ixml_renderer.
l_renderer = l_ixml->create_renderer( ostream = l_ostream
& nbsp; document = l_document ).
l_rc = l_renderer->render( ).
In the last step we upload the file to the sapgui
l_xml_size = l_ostream->get_num_written_raw( ).
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
bin_filesize = l_xml_size
filename = 'c:\temp\flights.xml'
filetype = 'BIN'
CHANGING
data_tab = l_xml_table
EXCEPTIONS
OTHERS = 24.
This finished the first step-of-three. As mentioned before the next log will focus on the conversion from xml files (back) to abap tables.
REPORT z_xit_xml_dom_create.
TYPE-POOLS: ixml.
TYPES: BEGIN OF xml_line,
data(256) TYPE x,
END OF xml_line.
DATA: l_ixml TYPE REF TO if_ixml,
l_streamfactory TYPE REF TO if_ixml_stream_factory,
l_ostream TYPE REF TO if_ixml_ostream,
l_renderer TYPE REF TO if_ixml_renderer,
l_document TYPE REF TO if_ixml_document.
DATA: l_element_flights TYPE REF TO if_ixml_element,
l_element_airline TYPE REF TO if_ixml_element,
l_element_flight TYPE REF TO if_ixml_element,
l_element_from TYPE REF TO if_ixml_element,
l_element_to TYPE REF TO if_ixml_element,
l_element_dummy TYPE REF TO if_ixml_element,
l_value TYPE string.
DATA: l_xml_table TYPE TABLE OF xml_line,
l_xml_size TYPE i,
l_rc TYPE i.
DATA: lt_spfli TYPE TABLE OF spfli.
DATA: l_spfli TYPE spfli.
START-OF-SELECTION.
Fill the internal table
SELECT * FROM spfli INTO TABLE lt_spfli.
Sort internal table
SORT lt_spfli BY carrid.
Start filling xml dom object from internal table
LOOP AT lt_spfli INTO l_spfli.
AT FIRST.
Creating a ixml factory
l_ixml = cl_ixml=>create( ).
Creating the dom object model
l_document = l_ixml->create_document( ).
Fill root node with value flights
l_element_flights = l_document->create_simple_element(
name = 'flights'
parent = l_document ).
ENDAT.
AT NEW carrid.
Create element 'airline' as child of 'flights'
l_element_airline = l_document->create_simple_element(
name = 'airline'
parent = l_element_flights ).
Create attribute 'code' of node 'airline'
l_value = l_spfli-carrid.
l_rc = l_element_airline->set_attribute( name = 'code' value = l_value ).
Create attribute 'name' of node 'airline'
SELECT SINGLE carrname FROM scarr INTO l_value WHERE carrid EQ l_spfli-carrid.
l_rc = l_element_airline->set_attribute( name = 'name' value = l_value ).
ENDAT.
AT NEW connid.
Create element 'flight' as child of 'airline'
l_element_flight = l_document->create_simple_element(
name = 'flight'
parent = l_element_airline ).
Create attribute 'number' of node 'flight'
l_value = l_spfli-connid.
l_rc = l_element_flight->set_attribute( name = 'number' value = l_value ).
ENDAT.
Create element 'from' as child of 'flight'
CONCATENATE l_spfli-cityfrom ',' l_spfli-countryfr INTO l_value.
l_element_from = l_document->create_simple_element(
name = 'from'
value = l_value
parent = l_element_flight ).
Create attribute 'airport' of node 'from'
l_value = l_spfli-airpfrom.
l_rc = l_element_from->set_attribute( name = 'airport' value = l_value ).
Create element 'to' as child of 'flight'
CONCATENATE l_spfli-cityto ',' l_spfli-countryto INTO l_value.
l_element_to = l_document->create_simple_element(
name = 'to'
value = l_value
parent = l_element_flight ).
Create attribute 'airport' of node 'from'
l_value = l_spfli-airpto.
l_rc = l_element_to->set_attribute( name = 'airport' value = l_value ).
Create element 'departure' as child of 'flight'
l_value = l_spfli-deptime.
l_element_dummy = l_document->create_simple_element(
name = 'departure'
value = l_value
parent = l_element_flight ).
Create element 'arrival' as child of 'flight'
l_value = l_spfli-arrtime.
l_element_dummy = l_document->create_simple_element(
name = 'arrival'
value = l_value
parent = l_element_flight ).
Create element 'type' as child of 'flight'
CASE l_spfli-fltype.
WHEN 'X'.
l_value = 'Charter'.
WHEN OTHERS.
l_value = 'Scheduled'.
ENDCASE.
l_element_dummy = l_document->create_simple_element(
name = 'type'
value = l_value
parent = l_element_flight ).
ENDLOOP.
IF sy-subrc NE 0.
MESSAGE 'No data into db table ''spfli'', please run program ''SAPBC_DATA_GENERATOR'' with transaction ''SA38''' TYPE 'E'.
ENDIF.
Creating a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
Connect internal XML table to stream factory
l_ostream = l_streamfactory->create_ostream_itable( table = l_xml_table ).
Rendering the document
l_renderer = l_ixml->create_renderer( ostream = l_ostream
document = l_document ).
l_rc = l_renderer->render( ).
Saving the XML document
l_xml_size = l_ostream->get_num_written_raw( ).
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
bin_filesize = l_xml_size
filename = 'c:\temp\flights.xml'
filetype = 'BIN'
CHANGING
data_tab = l_xml_table
EXCEPTIONS
OTHERS = 24.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
<?xml version="1.0"?>
<flights>
<airline code="AA" name="American Airlines">
<flight number="0017">
<from airport="JFK">NEW YORK,US</from>
<to airport="SFO">SAN FRANCISCO,US</to>
<departure>110000</departure>
<arrival>140100</arrival>
<type>Scheduled</type>
</flight>
<flight number="0064">
<from airport="SFO">SAN FRANCISCO,US</from>
<to airport="JFK">NEW YORK,US</to>
<departure>090000</departure>
<arrival>172100</arrival>
<type>Scheduled</type>
</flight>
</airline>
<airline code="AZ" name="Alitalia">
<flight number="0555">
<from airport="FCO">ROME,IT</from>
<to airport="FRA">FRANKFURT,DE</to>
<departure>190000</departure>
<arrival>210500</arrival>
<type>Scheduled</type>
</flight>
<flight number="0788">
<from airport="FCO">ROME,IT</from>
<to airport="TYO">TOKYO,JP</to>
<departure>120000</departure>
<arrival>085500</arrival>
<type>Scheduled</type>
</flight>
<flight number="0789">
<from airport="TYO">TOKYO,JP</from>
<to airport="FCO">ROME,IT</to>
<departure>114500</departure>
<arrival>192500</arrival>
<type>Scheduled</type>
</flight>
<flight number="0790">
<from airport="FCO">ROME,IT</from>
<to airport="KIX">OSAKA,JP</to>
<departure>103500</departure>
<arrival>081000</arrival>
<type>Charter</type>
</flight>
</airline>
<airline code="DL" name="Delta Airlines">
<flight number="1984">
<from airport="SFO">SAN FRANCISCO,US</from>
<to airport="JFK">NEW YORK,US</to>
<departure>100000</departure>
<arrival>182500</arrival>
<type>Scheduled</type>
</flight>
<flight number="1699">
<from airport="JFK">NEW YORK,US</from>
<to airport="SFO">SAN FRANCISCO,US</to>
<departure>171500</departure>
<arrival>203700</arrival>
<type>Scheduled</type>
</flight>
<flight number="0106">
<from airport="JFK">NEW YORK,US</from>
<to airport="FRA">FRANKFURT,DE</to>
<departure>193500</departure>
<arrival>093000</arrival>
<type>Scheduled</type>
</flight>
</airline>
<airline code="JL" name="Japan Airlines">
<flight number="0407">
<from airport="NRT">TOKYO,JP</from>
<to airport="FRA">FRANKFURT,DE</to>
<departure>133000</departure>
<arrival>173500</arrival>
<type>Scheduled</type>
</flight>
<flight number="0408">
<from airport="FRA">FRANKFURT,DE</from>
<to airport="NRT">TOKYO,JP</to>
<departure>202500</departure>
<arrival>154000</arrival>
<type>Charter</type>
</flight>
</airline>
<airline code="LH" name="Lufthansa">
<flight number="2407">
<from airport="TXL">BERLIN,DE</from>
<to airport="FRA">FRANKFURT,DE</to>
<departure>071000</departure>
<arrival>081500</arrival>
<type>Scheduled</type>
</flight>
<flight number="2402">
<from airport="FRA">FRANKFURT,DE</from>
<to airport="SXF">BERLIN,DE</to>
<departure>103000</departure>
<arrival>113500</arrival>
<type>Scheduled</type>
</flight>
<flight number="0402">
<from airport="FRA">FRANKFURT,DE</from>
<to airport="JFK">NEW YORK,US</to>
<departure>133000</departure>
<arrival>150500</arrival>
<type>Charter</type>
</flight>
<flight number="0401">
<from airport="JFK">NEW YORK,US</from>
<to airport="FRA">FRANKFURT,DE</to>
<departure>183000</departure>
<arrival>074500</arrival>
<type>Scheduled</type>
</flight>
<flight number="0400">
<from airport="FRA">FRANKFURT,DE</from>
<to airport="JFK">NEW YORK,US</to>
<departure>101000</departure>
<arrival>113400</arrival>
<type>Scheduled</type>
</flight>
</airline>
<airline code="QF" name="Qantas Airways">
<flight number="0005">
<from airport="SIN">SINGAPORE,SG</from>
<to airport="FRA">FRANKFURT,DE</to>
<departure>225000</departure>
<arrival>053500</arrival>
<type>Scheduled</type>
</flight>
<flight number="0006">
<from airport="FRA">FRANKFURT,DE</from>
<to airport="SIN">SINGAPORE,SG</to>
<departure>205500</departure>
<arrival>150500</arrival>
<type>Scheduled</type>
</flight>
</airline>
<airline code="SQ" name="Singapore Airlines">
<flight number="0988">
<from airport="SIN">SINGAPORE,SG</from>
<to airport="TYO">TOKYO,JP</to>
<departure>163500</departure>
<arrival>001500</arrival>
<type>Scheduled</type>
</flight>
<flight number="0158">
<from airport="SIN">SINGAPORE,SG</from>
<to airport="JKT">JAKARTA,ID</to>
<departure>152500</departure>
<arrival>160000</arrival>
<type>Scheduled</type>
</flight>
<flight number="0015">
<from airport="SFO">SAN FRANCISCO,US</from>
<to airport="SIN">SINGAPORE,SG</to>
<departure>160000</departure>
<arrival>024500</arrival>
<type>Scheduled</type>
</flight>
<flight number="0002">
<from airport="SIN">SINGAPORE,SG</from>
<to airport="SFO">SAN FRANCISCO,US</to>
<departure>170000</departure>
<arrival>192500</arrival>
<type>Scheduled</type>
</flight>
</airline>
<airline code="UA" name="United Airlines">
<flight number="0941">
<from airport="FRA">FRANKFURT,DE</from>
<to airport="SFO">SAN FRANCISCO,US</to>
<departure>143000</departure>
<arrival>170600</arrival>
<type>Scheduled</type>
</flight>
<flight number="3504">
<from airport="SFO">SAN FRANCISCO,US</from>
<to airport="FRA">FRANKFURT,DE</to>
<departure>150000</departure>
<arrival>103000</arrival>
<type>Scheduled</type>
</flight>
<flight number="3516">
<from airport="JFK">NEW YORK,US</from>
<to airport="FRA">FRANKFURT,DE</to>
<departure>162000</departure>
<arrival>054500</arrival>
<type>Scheduled</type>
</flight>
<flight number="3517">
<from airport="FRA">FRANKFURT,DE</from>
<to airport="JFK">NEW YORK,US</to>
<departure>104000</departure>
<arrival>125500</arrival>
<type>Scheduled</type>
</flight>
</airline>
</flights>
Regards,
Amit
Reward all helpful replies. -
How to access internal table data from webdynpro to Flex application.
Hi Connoisseur
The data transfer from Abap WebDeypro to flex island works well. I followed , there is an example from Thomas Jung (by the way as always Great Work) and Karthikeyan Venkatesan (Infosys) but this example covers simple type only.
There is no example with complex types like arrayCollection which handle the transfer of data from flex to WebDynpro.
i tried to do pass internal table value to flex-datagrid.but its not work.
i would like to know
1.how to access internal table data from webdynpro to Flex application.
2.how to pass the internal table to flex-datagrid.
2.how to pass dynamically in ADOBE flex.
3. how to do Flex is receiving the wd context data?
4. how can we update WD context with FLEX data.
Ple give me sample example and step by step procedure.
Regards
laxmikanthHi Laxmikanth,
Please refer this...
Flash island: update complex type from flex
Cheers..
kris. -
How to Populate Internal table data to Table Control in a Report Program
Dear All,
How to Populate Internal table data to Table Control in a Report Program? It is a pure report program with out any Module pool coding involved, which is just used to display data. Till now it is being displayed in a report. Now the user wants the data to be displayed in a table control. Could someone tell me how to go about with this.
Thanks in Advance,
Joseph ReddyIf you want to use a table control, you will need to create a screen.
In your report....
start-of-selection.
perform get_data. " Get all your data here
call screen 100. " Now present to the user.
Double click on the "100" in your call screen statement. This will forward navigate you to the screen. If you have not created it yet, it will ask you if you want to create it, say yes. Go into screen painter or layout of the screen. Use the table control wizard to help you along the process. It will write the code for you. Since it is an output only table control, it will be really easy with not a lot of code.
A better way to present the data to the user would be to give it in a ALV grid. If you want to go that way, it is a lot easier. Here is a sample of the ALV function module. You don't even have to create a screen.
report zrich_0004
no standard page heading.
type-pools slis.
data: fieldcat type slis_t_fieldcat_alv.
data: begin of imara occurs 0,
matnr type mara-matnr,
maktx type makt-maktx,
end of imara.
* Selection Screen
selection-screen begin of block b1 with frame title text-001 .
select-options: s_matnr for imara-matnr .
selection-screen end of block b1.
start-of-selection.
perform get_data.
perform write_report.
* Get_Data
form get_data.
select mara~matnr makt~maktx
into corresponding fields of table imara
from mara
inner join makt
on mara~matnr = makt~matnr
where mara~matnr in s_matnr
and makt~spras = sy-langu.
endform.
* WRITE_REPORT
form write_report.
perform build_field_catalog.
* CALL ABAP LIST VIEWER (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
it_fieldcat = fieldcat
tables
t_outtab = imara.
endform.
* BUILD_FIELD_CATALOG
form build_field_catalog.
data: fc_tmp type slis_t_fieldcat_alv with header line.
clear: fieldcat. refresh: fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic = 'Material Number'.
fc_tmp-fieldname = 'MATNR'.
fc_tmp-tabname = 'IMARA'.
fc_tmp-outputlen = '18'.
fc_tmp-col_pos = 2.
append fc_tmp to fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic = 'Material'.
fc_tmp-fieldname = 'MAKTX'.
fc_tmp-tabname = 'IMARA'.
fc_tmp-outputlen = '40'.
fc_tmp-col_pos = 3.
append fc_tmp to fieldcat.
endform.
Regards,
Rich Heilman -
How to pass the internal table data to smartforms
Hi Gurus,
I have a problem in passing the internal table data to the smartforms. In the print program
I get the data into one internal table "LT_PRDLBL1". I am passing this internal table to the other in print program by calling the FM_NAME.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = T_SSFCTRLOP
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS = T_SSFCOMPOP
USER_SETTINGS = ' '
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
LT_PRDLBL = LT_PRDLBL1
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
In the print program I had defined the internal tables like
Data: lt_prdlbl type standard table of zprdlbl.
Data: Begin of lt_prdlbl1 occurs 0.
include structure zprdlbl.
Data: End of lt_prdlbl1.
How do I define the internal table in the smartform to get the values printed in the smartform?.
<REMOVED BY MODERATOR>
Thanks,
Edited by: Alvaro Tejada Galindo on Apr 21, 2008 1:01 PMNehal,
Thanks for quick response.
In the smartform under the Form Interface->Tables tab
I had defined
LT_PRDLBL LIKE ZPRDLBL. If I define TYPE instead of LIKE I get the error message saying "FLAT TYPES may only be referenced using LIKE for table parameters".
In the main window I have created LOOP, in which I have ticked the internal table and
LT_PRDLBL INTO LT_PRDLBL. In the text node I am passing the values of this internal table
<_PRDLBL-XXXX&.
I am able to get the print but the data is not printing.
Please help me with this.
Thanks, -
How to save internal table data to file on local disk from smartforms?
Hi there,
I'm trying to save internal table data into .csv file on presentation server from within smartforms using GUI_DOWNLOAD function.
This function works fine from abap program, but when I call it from smartforms it does nothing. Form prints ok and there is no file created on local dick.
Is there a way to save smartforms internal table data to local disk?
Thanks in advance,
BaskeHi Jey,
Thanks for your prompt replay.
Unfortunately, Iu2019ve tried both your suggestions without success. Smartforms behaves just like in case of GUI_DOWNLOAD. There is no file saved on disk.
Do you have any other idea?
BR,
Baske -
Creation of internal table dynamically based on the Date Range entered
Hi SAPgurus,
I have been facing one issue i.e creation of internal table dynamically based on the date range entered in the selection screen. For example the date range I am giving as 06/2006 to 08/2006, it should display the Fieldcatelog dynamically, this part i have completed but the only issue I am facing is to populate the sales data into that fields.
Right now my program is displaying the ALV like this.
Ex:
<b>CSR District 06/2006 07/2006 08/2006 totals</b>
Shiva New York 10.00
Shiva new york 30.00
Shiva new york 40.00
but it should display like this
<b>CSR District 06/2006 07/2006 08/2006 totals</b>
Shiva New York 10.00 30.00 40.00
80.00
Please help me in this scenario, how to acheive like this..
Thanks & Regards,
Sivaram KandulaHi Sivaram,
I also got the same requirement . i saw rich and your code whatever you have uploaded.i have created dynamic internal table but i am facing the issue to populating the data to my dynamic internal table.
Sivaram, can you please explain your code after this.
*<dyn_table>
*tab_item.
LOOP AT tab_item.
ASSIGN COMPONENT 1 OF STRUCTURE <dyn_wa> TO <dyn_table>.
ASSIGN COMPONENT 2 OF STRUCTURE <dyn_wa> TO <dyn_table>.
* <dyn_wa> = tab_item-bztxt.
* <dyn_wa> = tab_item-total.
* APPEND <dyn_wa> TO <dyn_table>.
** <dyn_wa> = tab_item-total.
** ASSIGN tab_item-bezei TO <dyn_wa>.
* APPEND <dyn_table>.
ENDLOOP.
how you are puting the loop at tab_item. but tab_item is already commented.
can you send me the code after that.
i am sending some part of my code.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = gt_fCAT1
IMPORTING
ep_table = new_table.
ASSIGN new_table->* TO <dyn_table>.
create data new_line like line of <dyn_table>.
assign new_line->* to <dyn_wa>.
select vbeln
fkart
vkorg
vtweg
fkdat
spart
fksto
from vbrk
client specified
into table gt_vbrk
where mandt = sy-mandt
and fkart in ('ZF5','ZFR')
and vkorg = '1100'
and vtweg = '20'
and fkdat in s_fkdat
and spart = '06'
and fksto = ' '.
if gt_vbrk[] is not initial.
select vbeln
fkimg
prsdt
netwr
matnr
arktx
werks
mwsbp
from vbrp
client specified
into table gt_vbrp
for all entries in gt_vbrk
where vbeln = gt_vbrk-vbeln
and werks in s_werks
and matnr in s_matnr.
endif.
select mnr ltx spras from t247
into table it_t247
where spras = 'E'.
data: lv_month1 type vbrp-prsdt,
name1(3) type c,
s_month type string,
s_month1 type string,
s_month2 type string.
* lv_netwr1 type vbrp-netwr,
* lv_mwsbp1 type vbrp-mwsbp.
loop at gt_vbrp into gs_vbrp.
gs_final2-matnr = gs_vbrp-matnr.
gs_final2-arktx = gs_vbrp-arktx.
gs_final2-fkimg = gs_vbrp-fkimg.
lv_month1 = gs_vbrp-prsdt.
read table it_t247 into wa_t247 with key mnr = lv_month1+4(2).
if sy-subrc eq 0.
name1 = wa_t247-ltx.
endif.
concatenate name1
lv_month1(4) into s_month SEPARATED BY '_' .
CONCATENATE S_MONTH 'QTY' INTO S_MONTH1 SEPARATED BY ''.
CONCATENATE S_MONTH 'VALUE' INTO S_MONTH2 SEPARATED BY ''.
gs_final2-month = s_month.
lv_netwr1 = gs_vbrp-netwr.
lv_mwsbp1 = gs_vbrp-mwsbp.
gs_final2-MONTH_QTY = S_MONTH1.
GS_FINAL2-MONTH_VAL = S_MONTH2.
gs_final2-value = lv_netwr1 + lv_mwsbp1.
append gs_final2 to gt_final2.
clear: gs_final2. "lv_name2.
endloop.
if gt_final2[] is not initial.
sort gt_final2 by matnr month ascending .
loop at gt_final2 into gs_final2.
gs_final2_01 = gs_final2.
collect gs_final2_01 into gt_final2_01.
endloop.
endif.
ENDIF..
Regards
Ankur -
Internal table data to XML file.
Hi All,
May I know how can we convert the internal table data to xml file?
Regards
Ramesh.Re: Convert XML to internal Table
Go through the link..u should be able to solve the problem..
Maybe you are looking for
-
Issue while posting using goods issue for delivery type NL
Hello Experts, I have created an outbound delivery for an intra-company transfer (within same company code) between two plants. The delivery type in NL (replinishment delivery) When i am trying to post the goods issue from supplying plant, I am getti
-
Pages 5.1 (1769) Crashes Trying to Print
Pages 5.1 (1769) crashes every time I try and print something. I am able to export to PDF and then print that document, however. It seems to occur with both pages documents on my Mac and on iCloud. I am printing to a network printer, and I do not
-
BIG problem with Mail after updating Mac OS X Leopard to 10.5.7
Hi everyone, after updating OS X Leopard to 10.5.7, I noticed that all of my Mail accounts had disappeared. If I try to set them up again, Mail doesn't seem to be able to store them and after quitting and re-launching, they're gone. This had never ha
-
Validation on Application Level?
Hi, is there the possibility to define a validation on application level? Couldn't find anything. I thought about a validation on page 0, but page 0 doesn't allow to create validations... Purpose: I want to validate the Apex_Application.g_fxx arrays.
-
hi bw gurus I am looking for some document on flat file recommendations, Issues involved with ascii and csv formats. Does SAP recommend ascii format irrespective of size flat file? If some one can throw some light on this, it would be of great hel